LG inverter air conditioner Ducted Ducted High Prevalence Compact 24000 btu CM24F R-32 A+ Complete with wired control
Model
- Indoor unit model : CM24F N10
- Outdoor unit model : UUB1 U20
- Power: 24000 btu
Energy efficiency
Seasonal efficiency:
- SEER/ SCOP: 5.8 / 4.1
- Energy Efficiency Class (Cooling): A+
- Energy Efficiency Class (Heating) : A+
- Power consumption w: 180 / 150 / 130
Performance
- Absorbed current (Cooling/Heating): 6.5 / 7.1 (A)
- Sound Power Level IU dB(A): 60
- Sound Pressure Level IU dB(A): 35 / 34 / 32 (Min-Med-Max)
- Ventilation capacity: 18 / 16.5 / 14.5 m3/min
- Feed: 1/220-240/50
Characteristics
- Refrigerant gas : R32
- Diameter of liquid / gas pipes mm: 9.52/15.88
- Max height difference IU / UE : 30m
Dimensions
- Indoor Unit WxHxD (mm): 900 x 270 x 700; 26.5kg
- Outdoor Unit WxHxD (mm):870 x 650 x 330; 44.8kg
- Complete with wired control
General characteristics
Capacity / Structure
Indoor unit for false ceiling installation, for R32-type LG systems having a nominal capacity in cooling of 6.8 kW and 7.5 kW in heating.Metal containment body in galvanized steel sheet with expanded polystyrene coating.Heat exchanger heat made up of copper pipes and high efficiency aluminum fins. Internal unit dimensions in mm equal to 870 x 650 x 330.
Fan motor
Sirocco type fan with direct drive BLDC fan motor. Rated Power Consumption 101W Maximum 183W.
Air flow rate 18.0 / 16.5 / 14.54 m³/min Available static head Min 0 Max 150 Pa.
The BLDC motor allows the air flow to be controlled according to the load losses, simply by using the wired control, thus guaranteeing the optimal head and reducing noise to a minimum.
Double thermistor temperature control
Possibility of detecting the internal temperature from two sensors, one placed on the internal unit, the other placed on the wired controller.
The control can take place by single sensor, or combined with a double thermistor to obtain and optimize the internal air temperature.
Double thermistor temperature control
Possibility of WiFi connection as an accessory with code PWFMDD200
Description of the characteristics of the outdoor unit
The LG Electronics Single A system with R32 refrigerant consists of an external unit with air-cooling heat exchange to be installed outside the rooms and connected by means of refrigerant pipes to an internal unit for air conditioning, which can operate in both cooling and in heating alternately.
STRUCTURE
Self-supporting structure in warm gray painted galvanized steel sheet panels with surface treatment and Cataphoresis process, a surface treatment capable of conferring considerable resistance to corrosion in order to protect the outdoor unit from atmospheric agents. (1) Removable right front panel for connection operations with the refrigerant circuit with integrated handle to facilitate unit transport and positioning. (2) Removable upper cover to access the control components with integrated handle on the right side to facilitate transportation and positioning of the unit.(3)Protection grille on the air expulsion .
HEAT EXCHANGER
Wide Louver Fin external heat exchanger which gives an additional improvement in the exchange efficiency compared to a traditional exchanger, in corrugated copper tube with aluminum fins, covered with a Black Fin galvanic bath anti-corrosion treatment to give better resistance to acid rain and saltiness in sea areas. .Air inlets protected by a square mesh of the same color as the outdoor unit. Protection of the air detection probe in dedicated housing.
COMPRESSOR
Capacity delivery system consisting of 1 Twin Rotary Dc inverter hermetic compressor with direct start. linear control of the capacity with an action range between the minimum of 10% up to a maximum of 130%.
MOTOR/FAN
Fan for heat exchange with the outside of the helical type with suction on the rear side and horizontal delivery on the front side with an air flow rate of 58 m3/min. Motor type BLDC inverter with air flow and low noise.
REFRIGERANT CIRCUIT
The new units of the commercial line operate with a control based on the pressure of the refrigerant inside the circuit. This control mechanism is more precise and refined, without being negatively influenced by external temperature conditions.
Made of copper pipes, complete with dehydrator filters, 4-way cycle inversion valve, electronically controlled expansion valves, liquid state refrigerant separator with accumulation function on compressor suction, service valve, distribution system with connections having liquid and gas diameters of 9.52 mm and 15.88 mm respectively
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.