ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS   FREE FIRST START-UP Technical features Model : OMNIA M 3.2 10 Product code : 2CP000DF Command included Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A+++ SCOP heating with water set at 35 °C : 5.19 SCOP heating with water set at 45 °C : 3.49 SEER cooling with water set at 7 °C: 5.98 SEER cooling with water set at 18 °C: 8.78 Performance   Heating Useful power in heating with water set at 35° C: 10.0 kW Useful power in heating with water set at 45° C: 10.0 kW Useful power in heating with water set at 55° C: 9.50 kW Absorbed power with water set at 35° C: 2.02 kW Absorbed power with water set at 45° C: 2.67 kW Absorbed power with water set at 55° C: 3.06 kW Water flow rate with water set at 35° C : 1720 l/h Water flow rate with water set at 45° C : 1720 l/h Water flow rate with water set at 55° C : 1021 l/h Cooling down Useful power in cooling with water set at 7 °C: 8.20 kW Useful power in cooling with water set at 18 °C: 9.90 kW Absorbed power with water set at 7° C: 2.52 kW Absorbed power with water set at 18° C: 2.18 kW Water flow rate with water set at 7° C : 1410 l/h Water flow rate with water set at 18° C : 1703 l/h Technical data Compressor type : Twin Rotary DC Number of compressors : 1 Number of cooling circuits: 1 Type of fans : DC axial Number of fans : 1 Expansion vessel volume: 5 litres Water safety valve setting: 3 bar Minimum system water content: 25 litres Sound power level in heating : 56 ~ 65 dB(A) Sound power level in cooling : 56 ~ 65 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Maximum absorbed current: 17A Installation data Delivery pipe diameter: 1 ¼” M Return pipe diameter: 1 ¼” M Dimensions and weight Dimensions (WxHxD): 1385x865x526 mm Weight : 105Kg 5 years without worries Ferroli OMNIA M 3.2 Reversible heat pumps for outdoor installation with DC inverter compressor A heat pump with silent and ecological efficiency This series of air-to-water heat pumps with low environmental impact ecological gas R32 satisfies the winter and summer air conditioning needs of residential and commercial systems of small and medium power. All the units are suitable for outdoor installation and being able to produce water up to 65°C they can be used in radiant systems, fan coils, radiators and for the indirect production of DHW domestic hot water via an optional external boiler The units are characterized by the use of a DC inverter compressor which allows the power supplied to be modulated and are complete with a hydronic kit made up of all the essential components for quick and safe installation. The units are characterized by high energy efficiency and low sound levels which allow them to be used as a single generator serving the system or integrated with other energy sources such as electric support heaters or boilers All units are supplied as standard with a DHW tank water temperature probe and with an external air temperature probe, already installed on the unit, to carry out climatic regulation in heating and cooling. All units are carefully built and individually tested in the factory. The installation requires only the electrical and hydraulic connections. In a system it is possible to connect a maximum of 6 units in cascade; one of them will be “MASTER” while the others will be “SLAVE” units. Refrigerant circuit Contained inside the unit to facilitate maintenance operations, it is equipped with a compressor with a Twin rotary type DC Inverter motor to guarantee greater dynamic balancing and reduce vibrations. It is placed on rubber anti-vibration mounts and wrapped in a double layer of sound-absorbing material to reduce noise. The compressor is also equipped with a crankcase oil heater. The circuit is completed by a brazed stainless steel plate heat exchanger complete with antifreeze heater, axial fans with brushless DC motor complete with safety grilles, finned coil with anti-corrosion treatment made up of copper pipes and aluminum fins. All units are equipped with variable speed control of the fans which allows operation with low outside temperatures in cooling and high outside temperatures in heating Hydraulic circuit Contained inside the unit to facilitate maintenance operations, it is equipped as standard with a low-consumption circulator with brushless DC motor, water flow switch, automatic air vent, water pressure gauge, expansion tank, safety valve, Y-shaped water filter The plate heat exchanger and all the hydraulic circuit pipes are thermally insulated to prevent the formation of condensate and reduce heat loss Air source The benefits offered by this technology Aerothermal energy is the energy of the future. Ferroli aerothermal heat pumps use clean technology capable of obtaining up to 79% of the energy supplied for home comfort from the outside air. Ferroli aerothermal heat pumps are designed to provide cooling in summer, heating in winter and/or domestic hot water throughout the year. These latest generation heat pumps with inverter technology and the use of an ecological gas such as R32 do not produce heat from the combustion of a fuel but, simply with minimal energy consumption, exploit the energy in the air and transfer it to the inside the house Greater efficiency The OMNIA M 3.2 monobloc range has energy class A++ for the production of water at 55ºC and A+++ for the water produced at 35°C Compact outdoor unit. More space available Thanks to the adoption of a compact and small-sized unit, especially for the more powerful models, OMNIA M 3.2 can be easily placed outside the house, guaranteeing more available space inside Quick and easy installation Being a packaged unit, installation costs and times are significantly reduced. The interconnection of the refrigerant between the units is not necessary, as the entire refrigerant circuit is contained in the equipment, it is not even necessary to make a connection to bring the fuel, nor to create a flue gas evacuation duct. In addition, the device includes all the plumbing elements necessary for correct and quick connection to the plumbing and DHW heating system. Ideal combination with low temperature systems The OMNIA M 3.2 range can be easily installed in combination with low temperature systems, connecting fan coils, radiators, underfloor heating, to obtain maximum energy efficiency and maximum domestic comfort Easy integration with an existing boiler OMNIA M 3.2 can be combined and integrated with any boiler in the system. The control of the device, based on the external temperature and the required operating conditions, optimizes the production of heat for heating and DHW, using the device with the best efficiency Production of hot water at 65°C with low external temperature The OMNIA M 3.2 range is able to supply hot water at 60°C with an external temperature down to -15°C and at 40°C with an external temperature down to -25°C, without any type of support/accessory. With cold but positive temperatures OMNIA M 3.2 can produce hot water up to 65°C Protection against freezing of hydraulic components without the need to add glycol If low outside temperatures are detected, the circulation pump and the electric antifreeze heater of the plate heat exchanger are activated, thus preventing freezing of the hydraulic components. There is therefore no need to add glycol to the system Control system Operating principle The general control system allows monitoring of all the functions of the inverter system and of the correct functioning of the compressor. It also incorporates regulation algorithms using predefined climatic curves that can be selected by the customer, the management of a DHW circuit, the setting of time slots for noise reduction during the night, alarm signaling, pump block prevention and integration with external heat generators. The user interface consists of a wired remote controller which allows the management of: Management of 2 distinct zones, direct + mixed The unit is able to manage the pumps of both zones and for the mixed in addition the mixing valve and water delivery temperature probe Photovoltaic and Smart Grid management The management of a photovoltaic system and of the "intelligent grid" function is ensured by 2 digital inputs on the PCB with specific operating logics Heating and cooling system The unit activates in hot or cold mode, works by modulating the frequency of the compressor to keep the water temperature produced at the setpoint value set via the controller Domestic hot water production The unit activates in heating mode to maintain the temperature of a DHW tank at the set point value. A 3-way diverter valve is required (not supplied) and a temperature probe, supplied as standard, to be inserted in a well of the DHW boiler. Additional energy sources These sources can be activated in Integration or replacement of the heat pump during heating service or for DHW production and in case the heat pump does not work. Cascade management of several units Possibility of managing up to 6 units in cascade even with different powers with a single controller connected to the Master. In the event of an anomaly in one "Slave", the others can function normally DHW tank electric resistance It is possible to manage a possible integration and/or reserve electric resistance and for the anti-legionella function Fast DHW Function that can be activated manually which allows you to give priority to domestic hot water by bringing the DHW tank to the set point in the shortest possible time Anti-legionella function Weekly anti-legionella cycles can be set. The heat pump must be integrated with a DHW boiler electric heater or boiler Silenced mode 2 levels of silence are possible which, if active, according to an hourly programming, involve a reduction in the maximum frequency of the compressor and in the speed of the fan to reduce the noise emitted perhaps during the night and the power absorbed by the unit ON/OFF The unit can be switched on and off via an external contact. It can be operated from the controller keyboard Hot/Cold The unit can be switched on and off in cold and hot mode via 2 external contacts ECO Possibility of defining time slots and related setpoint for ECO modes in hot and cold mode Weekly programming Allows differentiated time programming for each day of the week by defining the working mode and setpoint for each band Anti-freeze protection Guaranteed up to an external air temperature of -20°C thanks to the heat pump itself operating in hot mode, to the standard anti-freeze electrical resistance and to the electric booster if installed. Remote control of the unit via APP Available for iOS and Android Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS. First start included Technical features Model : AHZ-080HCDS1 Command Included Optional commands Wi-Fi interface : HCCS-H64H2C1M Temperature sensor : HTS-E1000A1 Energy efficiency SEER: 5.83 SCOP : 3.50 Energy efficiency class: A+++/A++ Performance Rated capacity in heating : 8.0 ~ 11.0 kW Rated capacity in cooling : 7.2 ~ 9.1 kW Air flow rate : 2700 m 3 /h Water flow rate : 0.60 ~ 1.90 m 3 /h Sound Pressure : 47 ~ 50dB(A) Sound power : 61 ~ 64 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R-32 Operating range - Cooling: 5° ~ 46° Cbs - Heating: -25° ~ 35° Cbs - DHW : -25° ~ 40° Cbs Installation data Gate valves diameter: G 1” - G 1” (male) Inlet / outlet piping diameter: G 1” / G 1” (female) Dimensions and weight Dimensions (HxWxD): 815x1270x340 mm Weight : 88Kg Hisense Hi-Therma heat pump Hi-Therma monoblock is an air-water heat pump system with indoor and outdoor units combined in a single module positioned outdoors and to which the water pipes to the system are directly connected. It is therefore not necessary to carry out work on the refrigerant pipes, considerably simplifying the installation, allowing the same also to non-certified technicians and thus avoiding the registration practices on the F-gas electronic register. The unit is equipped with a heat exchanger, water circulator, expansion tank and all the main functional and safety hydraulic components. High Efficiency and Excellent Performance Ecological R32 Refrigerant The R32 refrigerant contributes to the achievement of the objectives of the F-gas regulation as described in the EU regulation 517/2014. Hisense Hi-Therma heat pump system adopts R32 refrigerant, which is a perfect solution to meet European targets on maximum CO 2 emissions Characteristics ◆ Zero Ozone Impact Potential ◆ Reduced Global Warming Potential ◆ Reduced Global Warming Potential ◆ Single component refrigerant: easy to handle High Efficiency A+++ Hi-Therma offers the most efficient solution for domestic heating and domestic hot water production. The highest energy classification A+++ (in low temperature water conditions) and A++ (at medium temperature) ensures savings on the electricity bill, reducing consumption, with a consequent advantage also on the environmental impact High Efficiency Twin Rotary Inverter Compressor High efficiency Twin Rotary DC Inverter compressor. Equipped with unique double pressure chamber design with symmetrical position which can effectively reduce vibration, noise and improve its performance, even in low frequency operation. Low lubricant emission, stable oil return and gas-liquid separator make the system more reliable 1. High efficiency electric motor Optimized electric motor design to increase compressor performance 2. Optimized rotor design Lowering the center of gravity of the compressor significantly reduces vibration and noise 3. Comprehensive mechanism design Improved volumetric efficiency and overall performance 4. Screw fixing Improve the fixing effect and reduce the deformation of the core Simplified installation The monobloc Hi-Therma unit allows for easy installation with no need for refrigerant piping work or additional refrigerant. It only needs the connections on the pipes towards the internal system Main hydraulic components Insulated plate heat exchanger Expansion tank Very high head DC circulator, flow rate reading on command Wide Operating Range Heating operation is guaranteed up to external temperatures of -25°C, therefore it is able to satisfy the user even in very harsh areas and can produce delivery water up to 60°C. In DHW mode it can operate up to an external 46°C and produce hot water inside the boiler up to 55°C, 75°C with the aid of an electric resistance. Management of External Heat Sources Hi-Therma can intelligently manage multiple supplementary heat sources: electric resistance for heating, electric resistance in the DHW tank, third-party boiler, solar thermal system Smart Grids The Hi-Therma system can be integrated with a photovoltaic system in order to optimize the self-consumption of the energy produced, thus reducing the energy requirement from the electricity grid Double Thermal Zone By managing two circuits with water at different temperatures, Hi-Therma adapts to the characteristics of the different terminals present in the system, thus responding to the needs of both new buildings and renovations Sound Reduction Low Noise Mode For optimal user comfort, the system can operate at low sound emission with a simple touch on the control, or via remote external input. Maximum reduction in this mode 8 dB(A). Night mode By means of night mode the period of low noise operation can be programmed according to the needs of the users. Sound pressure can be reduced up to 35dB(A) Up to 7 indoor environments with independent temperature control With the Hi-Therma system, up to 7 ambient temperatures can be managed independently through the installation of optional accessories: wall sensors, maximum 6, or thermostats, maximum 2. Hi-Therma can also manage swimming pool heating with a specially dedicated mode. Once this function is activated, the hot water can be sent to a heat exchanger allowing the tub to be heated and kept at a comfortable temperature between 24 and 33 ℃ Screed drying Hi-Therma is equipped with an automatic program for drying the radiant floor screed of a house under construction or renovation. The drying process takes 7 days. In the first three days the system works with water temperature at 25℃ and in the following four days with maximum outlet water temperature set by controller Standard Color Touch Remote Control for Monobloc, optional for Split version Sliding Screens Swiping the screen left and right quickly navigates between the different interfaces ◆ Elegant design ◆ Compact (90×90mm) ◆ Intuitive and touch screen General characteristics ◆ Setup wizard for commissioning. ◆ 10 languages, including Italian. ◆ View energy consumption and capacity. ◆ Water temperature control of the circuits and individual control of the room temperature. ◆ Alarm code and advanced parameter display; useful for maintenance. ◆ Weekly timer and holiday mode. ◆ ECO/Silent/Night mode suitable for different user needs. ◆ Physical button for on/off and reset Slide adjustment The temperature can be adjusted quickly by sliding the semicircle, especially for large variation ranges. The lower physical button (on/off and reset) does not affect the aesthetics thanks to its lateral positioning Theme setting Three different themes, day, night and auto, can be applied to different scenarios at different times, giving you a more user-friendly and personalized interface view Easy installation In designing the control we have given great importance to practicality and ease of installation. Thanks to the rear anchoring panel, assembly and disassembly is very quick Room thermostat The optional thermostat allows you to set both room temperature and to manage the most useful control parameters on the indoor unit. It allows you to adjust the room temperature precisely and in real time, ensuring high comfort and energy savings. It is possible to connect up to 2 thermostats per unit Features HSXE-VC04 ◆ Elegant design ◆ Flat shape for easy wall installation ◆ Compact (86×86mm) ◆ Intuitive control via touch buttons ◆ Room temperature and DHW set ◆ ECO/DHW/Timer (0.5-24 hours) One button for DHW Users can access the domestic hot water mode setting with one touch and also manage the main circuit settings Remote Management Via App Thanks to the optional Hi-Mit II interface it is possible to manage and monitor the system remotely. Connected Hi-Mit II to the LAN cable or to the WiFi router, users can manage the system anytime and anywhere, using the appropriate App from their smartphone Simple configuration and use ◆ Up to 64 managed drives ◆ Up to 32 users ◆ Consumption management ◆ Faults ◆ On/Off ◆ Circuit/room/DHW temperatures ◆ 14 languages, including Italian ◆ Multiple scenarios that can be set Energy management Hi-Mit allows intelligent energy management, thanks to the display of readings divided by day, week or month. Being able to set also the low consumption mode can further increase the energy saving of the system Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! IN CASE OF UNAVAILABILITY IMMEDIATELY, THE PRODUCT WILL BE ORDERED AND SHIPPED WITHIN 10 WORKING DAYS   FIRST START-UP FREE Technical Features Model : OMNIA S 3.2 12-T Product Code : 0XHLCSWA Command included Optional accessories Unpainted built-in cabinet 016092X0 Painted built-in wardrobe 016093X0 Optional accessories Unpainted built-in cabinet 016092X0 Painted built-in wardrobe 016093X0 Energy Efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ SCOP heating with water set to 35 °C: 4.81 SEER cooling with water set at 7 °C: 4.86 Performance   Heating Useful power in heating with water set at 35° C: 12.1 kW Useful power in heating with water set at 45° C: 12.3 kW Useful power in heating with water set at 55° C: 11.9 kW Power absorbed with water set at 35°C: 2.44 kW Power absorbed with water set at 45°C: 3.32 kW Power absorbed with water set at 55°C: 3.90 kW Water flow rate with water set at 35°C: 2081 l/h Water flow rate with water set at 45°C: 2116 /h Water flow rate with water set at 55°C: 1279 l/h Cooling Useful power in cooling with water set at 7 °C: 11.5 kW Useful power in cooling with water set at 18 °C: 12.0 kW Power absorbed with water set at 7° C: 4.18 kW Power absorbed with water set at 18°C: 3.04 kW Water flow rate with water set at 7°C: 1978 l/h Water flow rate with water set at 18°C: 2064 l/h Technical data of external unit Compressor type : Twin Rotary DC Number of compressors : 1 Number of refrigeration circuits: 1 Fan type : DC Axial Number of fans: 1 Sound power level in heating : 56 ~ 65 dB(A) Sound power level in cooling : 56 ~ 69 dB(A) Liquid pipe diameter: 9.52 mm (3/8") Gas pipe diameter: 15.88 (5/8") Maximum pipe length: 30 m Maximum pipe height difference: 20 m Technical data of the internal unit Exchanger type: Brazed stainless steel plates Expansion vessel volume: 10 litres Water safety valve calibration: 3 bar Minimum system water content: 40 litres System pipe diameter: 1" gas F Diameter of ACS pipes: 3/4" gas F Liquid pipe diameter: 9.52 mm (3/8") Gas pipe diameter: 15.88 (5/8") Electrical Data Power supply (V,Hz,Ø) : 380~415/50/3 Refrigerant gas: R32 Dimensions and Weight External unit dimensions (WxHxD): 1118x865x523 mm External unit weight: 112.0 Kg Internal unit dimensions (WxHxD): 422x702x320 mm 5 years without worries Ferroli OMNIA S 3.2 Reversible heat pumps for split installation with DC inverter compressor Silence, efficiency and design OMNIA S 3.2 is the new range of split heat pumps Full Inverter R32 by Ferroli. The range includes an External Unit with the heart of the refrigeration circuit, from the compressor to the fan with the air-side exchanger, which is connected to the refrigerant gas pipes towards the Internal Unit. The Internal Unit instead contains the heart of the generator's hydraulic circuit with all the main pre-installed components, such as the high-efficiency circulator and the expansion vessel, to allow safe, practical and fast installation The split installation of OMNIA S 3.2 , with only gas pipes between the external and internal unit, is synonymous with safety with respect to any freezing problem, even at the most rigid temperatures (up to -25°C) and in the absence of electricity. All the units satisfy the most extreme winter and summer air conditioning needs, in fact they can produce hot water up to 65°C , which makes them suitable for practically all heating systems, whether radiant, fan coil or radiator, including the production of domestic hot water (DHW), via an external boiler The new concept Ferroli Full Inverter uses DC inverter modulations on the 3 main energy-consuming components of the machine, namely compressor, fan and pump. This allows the power supplied to be modulated by finely tracking the thermal load and allowing the user extremely high efficiencies and significant energy savings . Furthermore, the concept Ferroli Full Inverter guarantees noise levels among the lowest on the market, avoiding power surges and guaranteeing a longer useful life for the components. Internal and external unit of OMNIA 3.2 The External Unit contains the heart of the refrigeration circuit, while the Internal Unit the heart of the hydraulic circuit. They are connected to each other by pipes ecological refrigerant gas R32 , which has allowed us to combine high efficiency with a reduced environmental impact. Thanks to its GWP of 675 , about a third of the GWP of R410a, helps reduce CO2 equivalent emissions, the main cause of global warming The heat pumps they use the External Unit to extract heat from the air outside the home and convey it to the water in your system, via an exchanger in the Internal Unit. This is precisely why they are able to obtain such high efficiencies , exploiting in a way renewable the energy already present in the air outside the home The new concept Ferroli Full Inverter then does the rest, tracking the thermal loads precisely and without waste (modulating the compressor, pump and fan), managing to achieve even greater efficiencies, guaranteeing significant savings on your bill , without stressing your components and with very low noise levels OMNIA S 3.2 it can be used either as the only generator in the system or integrated with other sources such as a Ferroli boiler The control system The User Interface has been equipped with Capsense technology with 2.8” graphic display, which allows the user to interact with the product in an easy and extremely simple way Modbus protocol It can be interfaced with BMS/BACS automation and management systems Heating and cooling Full Inverter modulation finely follows the desired setpoints, with the possibility of setting climatic curves in heating and cooling, further optimising the user's consumption Domestic hot water production When the DHW Temperature probe calls the machine it automatically diverts to the domestic hot water boiler with a dedicated DHW Setpoint. 3-way diverter valve supplied as standard Smart Grid Inputs from photovoltaic and grid Digital Smart Grid inputs for managing an input from a photovoltaic system and from the electricity grid. These allow you to optimise consumption and costs on your bill Electric heating element for ACS boiler The ACS electric integration serves as an integration, anti-legionella or reserve source in the event of an anomaly Fast ACS Priority to DHW production to bring the boiler to the setpoint in the shortest possible time Anti-legionella function Allows you to set weekly anti-legionella cycles Silent mode Reduces the compressor frequency and fan speed, thus significantly reducing noise. Programmable on time slots ON/OFF From external contact. Activation and deactivation via an external contact, for example from a zone thermostat Hot / cold From external contacts. Summer/winter switching signal from outside, e.g. from the zone thermostat ECO function Dedicated setpoint for “ Eco ” operation. Can be set with daily time slot Antifreeze protection Heat pump operation in heating mode with circulator ON and possible electric booster Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! IN CASE OF UNAVAILABILITY IMMEDIATELY, THE PRODUCT WILL BE ORDERED AND SHIPPED WITHIN 10 WORKING DAYS   FIRST START-UP FREE Technical Features Model : OMNIA S 3.2 16 Product Code : 0XHKGSWA Command included Optional accessories Unpainted built-in cabinet 016092X0 Painted built-in wardrobe 016093X0 Optional accessories Unpainted built-in cabinet 016092X0 Painted built-in wardrobe 016093X0 Energy Efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ SCOP heating with water set to 35 °C: 4.62 SEER cooling with water set at 7 °C: 4.69 Performance   Heating Useful power in heating with water set at 35° C: 15.9 kW Useful power in heating with water set at 45° C: 16.0 kW Useful power in heating with water set at 55° C: 16.0 kW Power absorbed with water set at 35°C: 3.53 kW Power absorbed with water set at 45°C: 4.57 kW Power absorbed with water set at 55°C: 5.61 kW Water flow rate with water set at 35°C: 2735 l/h Water flow rate with water set at 45°C: 2752 /h Water flow rate with water set at 55°C: 1720 l/h Cooling Useful power in cooling with water set at 7 °C: 14.0 kW Useful power in cooling with water set at 18 °C: 13.6 kW Power absorbed with water set at 7° C: 5.60 kW Power absorbed with water set at 18°C: 3.77 kW Water flow rate with water set at 7°C: 2408 l/h Water flow rate with water set at 18°C: 2563 l/h Technical data of external unit Compressor type : Twin Rotary DC Number of compressors : 1 Number of refrigeration circuits: 1 Fan type : DC Axial Number of fans: 1 Sound power level in heating mode : 56 ~ 69 dB(A) Sound power level in cooling : 56 ~ 69 dB(A) Liquid pipe diameter: 9.52 mm (3/8") Gas pipe diameter: 15.88 (5/8") Maximum pipe length: 30 m Maximum pipe height difference: 20 m Technical data of the internal unit Exchanger type: Brazed stainless steel plates Expansion vessel volume: 10 litres Water safety valve calibration: 3 bar Minimum system water content: 40 litres System pipe diameter: 1" gas F Diameter of ACS pipes: 3/4" gas F Liquid pipe diameter: 9.52 mm (3/8") Gas pipe diameter: 15.88 (5/8") Electrical Data Power supply (V,Hz,Ø) : 220~240/50/1 Refrigerant gas: R32 Dimensions and Weight External unit dimensions (WxHxD): 1118x865x523 mm External unit weight: 96.0 Kg Internal unit dimensions (WxHxD): 422x702x320 mm 5 years without worries Ferroli OMNIA S 3.2 Reversible heat pumps for split installation with DC inverter compressor Silence, efficiency and design OMNIA S 3.2 is the new range of split heat pumps Full Inverter R32 by Ferroli. The range includes an External Unit with the heart of the refrigeration circuit, from the compressor to the fan with the air-side exchanger, which is connected to the refrigerant gas pipes towards the Internal Unit. The Internal Unit instead contains the heart of the generator's hydraulic circuit with all the main pre-installed components, such as the high-efficiency circulator and the expansion vessel, to allow safe, practical and fast installation The split installation of OMNIA S 3.2 , with only gas pipes between the external and internal unit, is synonymous with safety with respect to any freezing problem, even at the most rigid temperatures (up to -25°C) and in the absence of electricity. All the units satisfy the most extreme winter and summer air conditioning needs, in fact they can produce hot water up to 65°C , which makes them suitable for practically all heating systems, whether radiant, fan coil or radiator, including the production of domestic hot water (DHW), via an external boiler The new concept Ferroli Full Inverter uses DC inverter modulations on the 3 main energy-consuming components of the machine, namely compressor, fan and pump. This allows the power supplied to be modulated by finely tracking the thermal load and allowing the user extremely high efficiencies and significant energy savings . Furthermore, the concept Ferroli Full Inverter guarantees noise levels among the lowest on the market, avoiding power surges and guaranteeing a longer useful life for the components. Internal and external unit of OMNIA 3.2 The External Unit contains the heart of the refrigeration circuit, while the Internal Unit the heart of the hydraulic circuit. They are connected to each other by pipes ecological refrigerant gas R32 , which has allowed us to combine high efficiency with a reduced environmental impact. Thanks to its GWP of 675 , about a third of the GWP of R410a, helps reduce CO2 equivalent emissions, the main cause of global warming The heat pumps they use the External Unit to extract heat from the air outside the home and convey it to the water in your system, via an exchanger in the Internal Unit. This is precisely why they are able to obtain such high efficiencies , exploiting in a way renewable the energy already present in the air outside the home The new concept Ferroli Full Inverter then does the rest, tracking the thermal loads precisely and without waste (modulating the compressor, pump and fan), managing to achieve even greater efficiencies, guaranteeing significant savings on your bill , without stressing your components and with very low noise levels OMNIA S 3.2 it can be used either as the only generator in the system or integrated with other sources such as a Ferroli boiler The control system The User Interface has been equipped with Capsense technology with 2.8” graphic display, which allows the user to interact with the product in an easy and extremely simple way Modbus protocol It can be interfaced with BMS/BACS automation and management systems Heating and cooling Full Inverter modulation finely follows the desired setpoints, with the possibility of setting climatic curves in heating and cooling, further optimising the user's consumption Domestic hot water production When the DHW Temperature probe calls the machine it automatically diverts to the domestic hot water boiler with a dedicated DHW Setpoint. 3-way diverter valve supplied as standard Smart Grid Inputs from photovoltaic and grid Digital Smart Grid inputs for managing an input from a photovoltaic system and from the electricity grid. These allow you to optimise consumption and costs on your bill Electric heating element for ACS boiler The ACS electric integration serves as an integration, anti-legionella or reserve source in the event of an anomaly Fast ACS Priority to DHW production to bring the boiler to the setpoint in the shortest possible time Anti-legionella function Allows you to set weekly anti-legionella cycles Silent mode Reduces the compressor frequency and fan speed, thus significantly reducing noise. Programmable on time slots ON/OFF From external contact. Activation and deactivation via an external contact, for example from a zone thermostat Hot / cold From external contacts. Summer/winter switching signal from outside, e.g. from the zone thermostat ECO function Dedicated setpoint for “ Eco ” operation. Can be set with daily time slot Antifreeze protection Heat pump operation in heating mode with circulator ON and possible electric booster Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! IN CASE OF UNAVAILABILITY IMMEDIATELY, THE PRODUCT WILL BE ORDERED AND SHIPPED WITHIN 10 WORKING DAYS   FIRST START-UP FREE Technical Features Model : OMNIA S 3.2 06 Product Code : 0XHT6SWA Command included Optional accessories CONNECT CRP remote control Performance Heating Useful power in heating with water set at 35° C: 6.35 kW Useful power in heating with water set at 45° C: 6.30 kW Useful power in heating with water set at 55° C: 6.00 kW Power absorbed with water set at 35° C: 1.28 kW Power absorbed with water set at 45°C: 1.70 kW Power absorbed with water set at 55°C: 2.03 kW Water flow rate with water set at 35°C: 1092 l/h Water flow rate with water set at 45°C: 1074 /h Water flow rate with water set at 55°C: 645 l/h Cooling Useful power in cooling with water set at 7 °C: 6.50 kW Useful power in cooling with water set at 18 °C: 6.50 kW Power absorbed with water set at 7° C: 2.17 kW Power absorbed with water set at 18°C: 1.35 kW Water flow rate with water set at 7°C: 1118 l/h Water flow rate with water set at 18°C: 1118 l/h Technical data of external unit Compressor type : Twin Rotary DC Number of compressors : 1 Number of refrigeration circuits: 1 Fan type : DC Axial Number of fans: 1 Sound power level in heating mode : 53 ~ 61 dB(A) Sound power level in cooling : 54 ~ 61 dB(A) Liquid pipe diameter: 6.35 mm (1/4") Gas pipe diameter: 15.88 (5/8") Maximum pipe length: 30 m Maximum pipe height difference: 20 m Technical data of the internal unit Exchanger type: Brazed stainless steel plates Expansion vessel volume: 10 litres Water safety valve calibration: 3 bar Minimum system water content: 40 litres System pipe diameter: 1" gas F Diameter of ACS pipes: 3/4" gas F Liquid pipe diameter: 9.52 mm (3/8") Gas pipe diameter: 15.88 (5/8") Electrical Data Power supply (V,Hz,Ø) : 220~240/50/1 Refrigerant gas: R32 Dimensions and Weight External unit dimensions (WxHxD): 1008x712x426 mm External unit weight: 58.0 Kg Internal unit dimensions (WxHxD): 595x1860x700 mm 5 years without worries Ferroli OMNIA ST 3.2 Reversible air-water heat pumps for split installation, with integrated DHW storage Efficiency meets comfort for integrated storage OMNIA ST 3.2 is the evolution of OMNIA S 3.2 and is part of the new range of Full Inverter R32 split heat pumps by Ferroli. When we talk about “split” we mean that the refrigeration circuit is divided between the two units, the external one and the internal one. The external unit contains the heart of the refrigeration circuit, from the compressor to the fan with the air side exchanger, which is connected with the refrigerant gas pipes to the internal unit. The internal unit contains the heart of the generator's hydraulic circuit with all the main pre-installed components, such as the high-efficiency circulator and the expansion vessel, to allow for safe, practical and fast installation. The OMNIA ST 3.2 differs from the OMNIA S 3.2 in having an accumulation tank for Domestic Hot Water integrated directly into the internal unit. This accumulation is 190L for sizes 4 to 10, while it is 240L for the larger ones, from 12 to 16T. But not only that, OMNIA ST 3.2 can be customized according to your needs, with an 18L inertial kit, a kit for solar integration on the accumulation or with a kit for the management of 2 different zones, classic direct and mixed, in case we need 2 different temperatures on the terminals in the house Thanks to its wide operating range , among the widest on the market, OMNIA ST 3.2 works down to -25°C external and produces hot water up to 65°C in nominal conditions. The new Full Inverter concept by Ferroli uses DC inverter modulations on the 3 main energy-consuming components of the machine, i.e. compressor, fan and pump. This allows the power supplied to be modulated by finely tracking the thermal load and allowing the user very high efficiencies and significant energy savings . Furthermore, the Full Inverter concept by Ferroli allows the inrush currents to be reduced, avoiding surges in the network and guaranteeing a longer useful life for the components. With noise levels among the lowest on the market , OMNIA ST 3.2 is able to satisfy all system requirements, but can easily be integrated with a Ferroli boiler . The internal unit, the heart of the hydraulic distribution If the external unit contains the heart of the refrigeration circuit, the Internal Unit contains the heart of the hydraulic circuit. OMNIA ST 3.2 is much more than an exchanger with a pump. The hydronic module includes all the main components of the system and can be customized according to the user's needs. Stainless steel plate exchanger, pressure gauge and pressure sensors, expansion vessel, safety valve, automatic vent and brushless DC circulator are just some of the components you will find inside. The control system The User Interface has been equipped with Capsense technology with 2.8” graphic display, which allows the user to interact with the product in an easy and extremely simple way Modbus protocol It can be interfaced with BMS/BACS automation and management systems Heating and cooling Full Inverter modulation finely follows the desired setpoints, with the possibility of setting climatic curves in heating and cooling, further optimising the user's consumption Domestic hot water production When the DHW Temperature probe calls the machine it automatically diverts to the domestic hot water boiler with a dedicated DHW Setpoint. 3-way diverter valve supplied as standard Smart Grid Inputs from photovoltaic and grid Digital Smart Grid inputs for managing an input from a photovoltaic system and from the electricity grid. These allow you to optimise consumption and costs on your bill Electric heating element for ACS boiler The ACS electric integration serves as an integration, anti-legionella or reserve source in the event of an anomaly Fast ACS Priority to DHW production to bring the boiler to the setpoint in the shortest possible time Anti-legionella function Allows you to set weekly anti-legionella cycles Silent mode Reduces the compressor frequency and fan speed, thus significantly reducing noise. Programmable on time slots ON/OFF From external contact. Activation and deactivation via an external contact, for example from a zone thermostat Hot / cold From external contacts. Summer/winter switching signal from outside, e.g. from the zone thermostat ECO function Dedicated setpoint for “ Eco ” operation. Can be set with daily time slot Antifreeze protection Heat pump operation in heating mode with circulator ON and possible electric booster The brand new Connect CRP and Connect CRP Zone The on-board interface communicates easily with the new intelligent Connect CRP systems, which can manage up to 8 thermostats divided into 2 zones, one direct and one mixed . Connect CRP is the brand new remote controller accessible via APP , available for both iOS and Android . The Connect CRP Zone is a zone thermostat that communicates via RF with the Connect CRP. It can be inserted into a classic 502 box, or left stand-alone on its practical table feet. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! IN CASE OF UNAVAILABILITY IMMEDIATELY, THE PRODUCT WILL BE ORDERED AND SHIPPED WITHIN 10 WORKING DAYS   FIRST START-UP FREE Technical Features Model : OMNIA S 3.2 08 Product Code : 0XHT8SWA Command included Optional accessories CONNECT CRP remote control Performance Heating Useful power in heating with water set at 35° C: 8.40 kW Useful power in heating with water set at 45° C: 8.30 kW Useful power in heating with water set at 55° C: 7.50 kW Power absorbed with water set at 35°C: 1.63 kW Power absorbed with water set at 45°C: 2.16 kW Power absorbed with water set at 55°C: 2.36 kW Water flow rate with water set at 35°C: 1445 l/h Water flow rate with water set at 45°C: 1428 /h Water flow rate with water set at 55°C: 806 l/h Cooling Useful power in cooling with water set at 7 °C: 7.45 kW Useful power in cooling with water set at 18 °C: 8.30 kW Power absorbed with water set at 7° C: 2.22 kW Power absorbed with water set at 18°C: 1.64 kW Water flow rate with water set at 7°C: 1281 l/h Water flow rate with water set at 18°C: 1428 l/h Technical data of external unit Compressor type : Twin Rotary DC Number of compressors : 1 Number of refrigeration circuits: 1 Fan type : DC Axial Number of fans: 1 Sound power level in heating : 55 ~ 61 dB(A) Sound power level in cooling : 54 ~ 61 dB(A) Liquid pipe diameter: 9.52 mm (3/8") Gas pipe diameter: 15.88 (5/8") Maximum pipe length: 30 m Maximum pipe height difference: 20 m Technical data of the internal unit Exchanger type: Brazed stainless steel plates Expansion vessel volume: 10 litres Water safety valve calibration: 3 bar Minimum system water content: 40 litres System pipe diameter: 1" gas F Diameter of ACS pipes: 3/4" gas F Liquid pipe diameter: 9.52 mm (3/8") Gas pipe diameter: 15.88 (5/8") Electrical Data Power supply (V,Hz,Ø) : 220~240/50/1 Refrigerant gas: R32 Dimensions and Weight External unit dimensions (WxHxD): 1118x865x523 mm External unit weight: 77.0 Kg Internal unit dimensions (WxHxD): 595x1860x700 mm 5 years without worries Ferroli OMNIA ST 3.2 Reversible air-water heat pumps for split installation, with integrated DHW storage Efficiency meets comfort for integrated storage OMNIA ST 3.2 is the evolution of OMNIA S 3.2 and is part of the new range of Full Inverter R32 split heat pumps by Ferroli. When we talk about “split” we mean that the refrigeration circuit is divided between the two units, the external one and the internal one. The external unit contains the heart of the refrigeration circuit, from the compressor to the fan with the air side exchanger, which is connected with the refrigerant gas pipes to the internal unit. The internal unit contains the heart of the generator's hydraulic circuit with all the main pre-installed components, such as the high-efficiency circulator and the expansion vessel, to allow for safe, practical and fast installation. The OMNIA ST 3.2 differs from the OMNIA S 3.2 in having an accumulation tank for Domestic Hot Water integrated directly into the internal unit. This accumulation is 190L for sizes 4 to 10, while it is 240L for the larger ones, from 12 to 16T. But not only that, OMNIA ST 3.2 can be customized according to your needs, with an 18L inertial kit, a kit for solar integration on the accumulation or with a kit for the management of 2 different zones, classic direct and mixed, in case we need 2 different temperatures on the terminals in the house Thanks to its wide operating range , among the widest on the market, OMNIA ST 3.2 works down to -25°C external and produces hot water up to 65°C in nominal conditions. The new Full Inverter concept by Ferroli uses DC inverter modulations on the 3 main energy-intensive components of the machine, namely compressor, fan and pump. This allows the power supplied to be modulated by finely tracking the thermal load and allowing the user very high efficiencies and significant energy savings . Furthermore, the Full Inverter concept by Ferroli allows the inrush currents to be reduced, avoiding surges in the network and guaranteeing a longer useful life for the components. With noise levels among the lowest on the market , OMNIA ST 3.2 is able to satisfy all system requirements, but can easily be integrated with a Ferroli boiler . The internal unit, the heart of the hydraulic distribution If the external unit contains the heart of the refrigeration circuit, the Internal Unit contains the heart of the hydraulic circuit. OMNIA ST 3.2 is much more than an exchanger with a pump. The hydronic module includes all the main components of the system and can be customized according to the user's needs. Stainless steel plate exchanger, pressure gauge and pressure sensors, expansion vessel, safety valve, automatic vent and brushless DC circulator are just some of the components you will find inside. The control system The User Interface has been equipped with Capsense technology with 2.8” graphic display, which allows the user to interact with the product in an easy and extremely simple way Modbus protocol It can be interfaced with BMS/BACS automation and management systems Heating and cooling Full Inverter modulation finely follows the desired setpoints, with the possibility of setting climatic curves in heating and cooling, further optimising the user's consumption Domestic hot water production When the DHW Temperature probe calls the machine it automatically diverts to the domestic hot water boiler with a dedicated DHW Setpoint. 3-way diverter valve supplied as standard Smart Grid Inputs from photovoltaic and grid Digital Smart Grid inputs for managing an input from a photovoltaic system and from the electricity grid. These allow you to optimise consumption and costs on your bill Electric heating element for ACS boiler The ACS electric integration serves as an integration, anti-legionella or reserve source in the event of an anomaly Fast ACS Priority to DHW production to bring the boiler to the setpoint in the shortest possible time Anti-legionella function Allows you to set weekly anti-legionella cycles Silent mode Reduces the compressor frequency and fan speed, thus significantly reducing noise. Programmable on time slots ON/OFF From external contact. Activation and deactivation via an external contact, for example from a zone thermostat Hot / cold From external contacts. Summer/winter switching signal from outside, e.g. from the zone thermostat ECO function Dedicated setpoint for “ Eco ” operation. Can be set with daily time slot Antifreeze protection Heat pump operation in heating mode with circulator ON and possible electric booster The brand new Connect CRP and Connect CRP Zone The on-board interface communicates easily with the new intelligent Connect CRP systems, which can manage up to 8 thermostats divided into 2 zones, one direct and one mixed . Connect CRP is the brand new remote controller accessible via APP , available for both iOS and Android . The Connect CRP Zone is a zone thermostat that communicates via RF with the Connect CRP. It can be inserted into a classic 502 box, or left stand-alone on its practical table feet. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! IN CASE OF UNAVAILABILITY IMMEDIATELY, THE PRODUCT WILL BE ORDERED AND SHIPPED WITHIN 10 WORKING DAYS   FIRST START-UP FREE Technical Features Model : OMNIA S 3.2 14T Product Code : 0XHUESWA Command included Optional accessories CONNECT CRP remote control Performance   Heating Useful power in heating with water set at 35° C: 14.5 kW Useful power in heating with water set at 45° C: 14.1 kW Useful power in heating with water set at 55° C: 13.8 kW Power absorbed with water set at 35°C: 3.15 kW Power absorbed with water set at 45°C: 3.92 kW Power absorbed with water set at 55°C: 4.68 kW Water flow rate with water set at 35°C: 2494 l/h Water flow rate with water set at 45°C: 2425 /h Water flow rate with water set at 55°C: 1484 l/h Cooling Useful power in cooling with water set at 7 °C: 12.4 kW Useful power in cooling with water set at 18 °C: 12.9 kW Power absorbed with water set at 7° C: 4.96 kW Power absorbed with water set at 18°C: 3.49 kW Water flow rate with water set at 7°C: 2133 l/h Water flow rate with water set at 18°C: 2322 l/h Technical data of external unit Compressor type : Twin Rotary DC Number of compressors : 1 Number of refrigeration circuits: 1 Fan type : DC Axial Number of fans: 1 Sound power level in heating : 56 ~ 65 dB(A) Sound power level in cooling : 56 ~ 65 dB(A) Liquid pipe diameter: 9.52 mm (3/8") Gas pipe diameter: 15.88 (5/8") Maximum pipe length: 30 m Maximum pipe height difference: 20 m Technical data of the internal unit Exchanger type: Brazed stainless steel plates Expansion vessel volume: 10 litres Water safety valve calibration: 3 bar Minimum system water content: 40 litres System pipe diameter: 1" gas F Diameter of ACS pipes: 3/4" gas F Liquid pipe diameter: 9.52 mm (3/8") Gas pipe diameter: 15.88 (5/8") Electrical Data Power supply (V,Hz,Ø) : 380~415/50/3 Refrigerant gas: R32 Dimensions and Weight External unit dimensions (WxHxD): 1118x865x523 mm External unit weight: 112.0 Kg Internal unit dimensions (WxHxD): 595x1860x700 mm 5 years without worries Ferroli OMNIA ST 3.2 Reversible air-water heat pumps for split installation, with integrated DHW storage Efficiency meets comfort for integrated storage OMNIA ST 3.2 is the evolution of OMNIA S 3.2 and is part of the new range of Full Inverter R32 split heat pumps by Ferroli. When we talk about “split” we mean that the refrigeration circuit is divided between the two units, the external one and the internal one. The external unit contains the heart of the refrigeration circuit, from the compressor to the fan with the air side exchanger, which is connected with the refrigerant gas pipes to the internal unit. The internal unit contains the heart of the generator's hydraulic circuit with all the main pre-installed components, such as the high-efficiency circulator and the expansion vessel, to allow for safe, practical and fast installation. The OMNIA ST 3.2 differs from the OMNIA S 3.2 in having an accumulation tank for Domestic Hot Water integrated directly into the internal unit. This accumulation is 190L for sizes 4 to 10, while it is 240L for the larger ones, from 12 to 16T. But not only that, OMNIA ST 3.2 can be customized according to your needs, with an 18L inertial kit, a kit for solar integration on the accumulation or with a kit for the management of 2 different zones, classic direct and mixed, in case we need 2 different temperatures on the terminals in the house Thanks to its wide operating range , among the widest on the market, OMNIA ST 3.2 works down to -25°C external and produces hot water up to 65°C in nominal conditions. The new Full Inverter concept by Ferroli uses DC inverter modulations on the 3 main energy-consuming components of the machine, i.e. compressor, fan and pump. This allows the power supplied to be modulated by finely tracking the thermal load and allowing the user very high efficiencies and significant energy savings . Furthermore, the Full Inverter concept by Ferroli allows the inrush currents to be reduced, avoiding surges in the network and guaranteeing a longer useful life for the components. With noise levels among the lowest on the market , OMNIA ST 3.2 is able to satisfy all system requirements, but can easily be integrated with a Ferroli boiler . The internal unit, the heart of the hydraulic distribution If the external unit contains the heart of the refrigeration circuit, the Internal Unit contains the heart of the hydraulic circuit. OMNIA ST 3.2 is much more than an exchanger with a pump. The hydronic module includes all the main components of the system and can be customized according to the user's needs. Stainless steel plate exchanger, pressure gauge and pressure sensors, expansion vessel, safety valve, automatic vent and brushless DC circulator are just some of the components you will find inside. The control system The User Interface has been equipped with Capsense technology with 2.8” graphic display, which allows the user to interact with the product in an easy and extremely simple way Modbus protocol It can be interfaced with BMS/BACS automation and management systems Heating and cooling Full Inverter modulation finely follows the desired setpoints, with the possibility of setting climatic curves in heating and cooling, further optimising the user's consumption Domestic hot water production When the DHW Temperature probe calls the machine it automatically diverts to the domestic hot water boiler with a dedicated DHW Setpoint. 3-way diverter valve supplied as standard Smart Grid Inputs from photovoltaic and grid Digital Smart Grid inputs for managing an input from a photovoltaic system and from the electricity grid. These allow you to optimise consumption and costs on your bill Electric heating element for ACS boiler The ACS electric integration serves as an integration, anti-legionella or reserve source in the event of an anomaly Fast ACS Priority to DHW production to bring the boiler to the setpoint in the shortest possible time Anti-legionella function Allows you to set weekly anti-legionella cycles Silent mode Reduces the compressor frequency and fan speed, thus significantly reducing noise. Programmable on time slots ON/OFF From external contact. Activation and deactivation via an external contact, for example from a zone thermostat Hot / cold From external contacts. Summer/winter switching signal from outside, e.g. from the zone thermostat ECO function Dedicated setpoint for “ Eco ” operation. Can be set with daily time slot Antifreeze protection Heat pump operation in heating mode with circulator ON and possible electric booster The brand new Connect CRP and Connect CRP Zone The on-board interface communicates easily with the new intelligent Connect CRP systems, which can manage up to 8 thermostats divided into 2 zones, one direct and one mixed . Connect CRP is the brand new remote controller accessible via APP , available for both iOS and Android . The Connect CRP Zone is a zone thermostat that communicates via RF with the Connect CRP. It can be inserted into a classic 502 box, or left stand-alone on its practical table feet. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! IN CASE OF UNAVAILABILITY IMMEDIATELY, THE PRODUCT WILL BE ORDERED AND SHIPPED WITHIN 10 WORKING DAYS OPTIONAL STARTER TO BE PURCHASED SEPARATELY! Technical Features Model : i-BX-N006M Item code : 401473 On-board control included Cooling Outside air temperature 35°C - Water temperature 7°C Cooling capacity: 5.9 kW Electrical power consumption: 2.08 kW EER : 2.84 ESEER : 4.32 Values ​​referred to the EN14511 regulation Outside air temperature 35°C - Water temperature 7°C Cooling capacity: 5.9 kW EER : 2.88 ESEER : 4.56 Class : C Heating Outside air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 6.36 kW Absorbed electrical power: 2.03 kW COP : 3.13 Values ​​referred to the EN14511 regulation Outside air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 6.37 kW COP : 3.19 Class : B Energy Efficiency in Cooling SEER : 4.44 Efficiency ηs : 175 % Energy Efficiency in Low Temperature Heating PDesign : 4.8 kW SCOP : 3.89 Efficiency ηs : 153 % Seasonal efficiency class: A++ Energy Efficiency in Medium Temperature Heating PDesign : 5.32 kW SCOP : 3.12 Efficiency ηs : 122 % Seasonal efficiency class: A+ Performance Cooling Exchanger water flow rate: 0.28 m3 /h Pump useful head: 39.8 kPa Sound power level: 65 dB(A) Sound pressure: 51 dB(A) Heating Exchanger water flow rate: 0.31 m3 /h Pump useful head: 35.4 kPa Sound power level: 65 dB(A) Sound pressure: 51 dB(A) Electrical Data Power supply (V,Hz,Ø) : 220~240/50/1 Refrigerant gas: R-410 Operating limits Heating Outside air temperature: -20°C ~ 45°C Inlet water temperature: 24°C~ 60°C Cooling Outside air temperature : -10°C ~ 46°C Inlet water temperature: -8°C ~ 20°C Dimensions and Weight Dimensions (LxWxH): 900x370x940 mm Empty weight: 85.0 Kg Climaveneta reversible heat pumps from 4.2 to 35.1 kW Perfect comfort and maximum efficiency Outdoor unit capable of providing heating, cooling and domestic hot water production with hermetic rotary compressors driven by variable speed motors in single-circuit configuration using R410A refrigerant, air-side exchange battery with copper pipes and aluminum fins, water-side exchanger with brazed plates. The unit is equipped with an electronic expansion valve and integrated hydronic module as standard. Flexible and reliable machine that adapts to the most diverse load conditions thanks to accurate thermoregulation combined with the use of inverter technology. The accurate design and use of innovative variable speed motors (inverters) ensure a high level of energy efficiency both at full and partial load. The heat pump for every need System efficiency The unit is designed with a system approach: all components are synergistically regulated according to proprietary logics to maximize the unit's efficiencies. High efficiency at partial loads High seasonal efficiency values, thanks to the modulation of the compressor with DC inverter technology that guarantees the exact energy corresponding to the real needs of the building. High efficiency that translates into reduced energy consumption throughout the working period of the unit. Comfort applications Residential buildings Commercial premises Infrastructures for entertainment Executive offices Hotels and Resorts Health facilities Centralized systems can be created with cascade systems ErP Ready Thanks to inverter technology, i-BX-N complies with the ErP directive, exceeding the minimum seasonal energy efficiency requirements in heating, SCOP, for both low temperature and medium temperature applications. Silent operation : Noise emissions are reduced thanks to the modulation of the compressor frequency and fan speed Reduced consumption : The dynamic control of the water flow temperature based on the external air temperature significantly increases the comfort and energy efficiency of the system. Domestic hot water : The production of domestic hot water is guaranteed all year round. The controller manages the production of hot water via a 3-way valve to be installed externally to the unit Ease of installation : The i-BX-N heat pumps are of the “packaged” monobloc type, particularly simple to install. The hydraulic components are all contained inside the unit and the connection pipes are of the hydraulic type, therefore it is not necessary to carry out the procedures typical of direct expansion air conditioning systems. Intelligent management of your system Nadisystem guarantees centralized regulation of the system ensuring: Easy communication between different components Simplified installation Reduced number of checks Integration between different sources Nadisystem integrates different energy sources based on availability, yields and costs of their use, always favoring renewable sources. The auxiliary sources are activated to satisfy the building's needs at low external temperatures by integrating the thermal power of the heat pump Customization of the system Nadisystem has several special functions that allow you to customize the system for every need. The controller is able to regulate two zones in both heating and cooling and with different flow temperatures, making the i-BX-N heat pump compatible with different types of systems with different water temperature levels. Cascading unit management In case of high thermal needs, it is possible to connect up to 4 units of the same power, optional configuration. The cascade configuration is managed in master/slave mode, with the master unit managing the information and transmitting it to the slave units. Structure Structure made of a base and self-supporting panels in hot-dip galvanized steel, painted with RAL 7035 polyester powders. Solidity and robustness Maximum accessibility for service and maintenance operations Fans Axial fans with continuous speed regulation that provide improved air distribution, achieving low consumption and minimising noise levels Drums Condenser with copper tubes and aluminum fins Battery protection grids as standard up to size 015 Control Keyboard with LCD display and electronic menu adjustment NADICompact Function keys Graphic display and icons allow quick and easy consultation and intervention on the unit by means of a multi-level menu NADISYSTEM Control Setting the water set point with a fixed or dynamic value with a climatic curve. Antifreeze protection depending on water temperature and outside air temperature. Production of domestic hot water. 4Management of external auxiliary sources. Two zones with different water temperature distribution Digital input for night function (Night mode). Remote connectivity to BMS systems via serial card (accessory). Cascade System Management In case of high thermal requirements, it is possible to connect up to 4 units of the same power in cascade Managed in master slave mode, with the master unit taking care of processing the information and then transmitting it to the slave units High degree of partialization of the power supplied, without decreasing performance, and a precise sizing of the system Possibility to dedicate one or all units to the production of domestic hot water. Integrated hydronic group All hydraulic components for installation are already included without any increase in unit size. EC pump, brushless motor with electronic commutation to guarantee low consumption and high system efficiency Flow switch, to protect the exchanger for low water flow rates Safety valve. Expansion vessel. Air vent valve. Mesh filter, not fitted but supplied with the unit Evaporator Brazed plate exchanger in AISI 316 steel, externally coated with closed-cell neoprene anti-condensation mat (CFC and HCFC-free). Electric thermostatic resistance to protect against ice formation inside. Low pressure drops and optimised heat exchange Refrigerant circuit Electronic expansion valve as standard Optimized coolant flow Precise and effective temperature control Quick adjustment and high efficiency Compressor Mitsubishi Electric compressors, synonymous with quality, reliability and performance at partial loads. Compressor installed on rubber anti-vibration supports and acoustically isolated by special sound-absorbing material. Special anti-freeze function Dedicated algorithms prevent the formation of ice inside by managing the operation Of the electrical resistance on the plate exchanger. Of the pump based on the outside air temperature. Of the flow switch in case of lack of flow The unit is also designed to operate with non-freezing mixtures up to an exchanger outlet temperature of -8°C. Accessories Remote keyboard Wired room terminal with backlit display, complete with temperature and humidity probe Cascade unit management kit Domestic hot water storage probe and inertial storage probe Copper-Aluminum type batteries with epoxy coating Copper-Copper type batteries Hydraulic separator Hot water storage Antifreeze electric resistance for base and auxiliary condensation collection tray RS485 serial card for ModBus protocol Rubber base anti-vibration mounts Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! IN CASE OF UNAVAILABILITY IMMEDIATELY, THE PRODUCT WILL BE ORDERED AND SHIPPED WITHIN 10 WORKING DAYS OPTIONAL STARTER TO BE PURCHASED SEPARATELY! Technical Features Model : i-BX-N020T Item code : 401480 On-board control included Cooling Outside air temperature 35°C - Water temperature 7°C Cooling capacity: 18.7 kW Electrical power consumption: 7.0 kW EER : 2.67 ESEER : 3.88 Values ​​referred to the EN14511 regulation Outside air temperature 35°C - Water temperature 7°C Cooling capacity: 18.7 kW EER : 2.7 ESEER : 3.99 Class : C Heating Outside air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 21.7 kW Electrical power consumption: 6.9 kW COP : 3.14 Values ​​referred to the EN14511 regulation Outside air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 21.7 kW COP : 3.16 Class : B Energy Efficiency in Cooling SEER : 4.14 Efficiency ηs : 163 % Energy Efficiency in Low Temperature Heating PDesign : 16.5 kW SCOP : 3.56 Efficiency ηs : 139 % Seasonal efficiency class: A+ Energy Efficiency in Medium Temperature Heating PDesign : 17.31 kW SCOP : 2.91 Efficiency ηs : 113 % Seasonal efficiency class: A+ Performance Cooling Exchanger water flow rate: 0.89 m3 /h Pump useful head: 74.6 kPa Sound power level: 74 dB(A) Sound pressure: 59 dB(A) Heating Exchanger water flow rate: 1.05 m3 /h Pump useful head: 60.3 kPa Sound power level: 74 dB(A) Sound pressure: 59 dB(A) Electrical Data Power supply (V,Hz,Ø) : 380~415/50/3 Refrigerant gas: R-410 Operating limits Heating Outside air temperature: -20°C ~ 45°C Inlet water temperature: 24°C~ 60°C Cooling Outside air temperature : -10°C ~ 46°C Inlet water temperature: -8°C ~ 20°C Dimensions and Weight Dimensions (LxWxH): 1450x550x1200 mm Empty weight: 205.0 Kg Climaveneta reversible heat pumps from 4.2 to 35.1 kW Perfect comfort and maximum efficiency Outdoor unit capable of providing heating, cooling and domestic hot water production with hermetic rotary compressors driven by variable speed motors in single-circuit configuration using R410A refrigerant, air-side exchange battery with copper pipes and aluminum fins, water-side exchanger with brazed plates. The unit is equipped with an electronic expansion valve and integrated hydronic module as standard. Flexible and reliable machine that adapts to the most diverse load conditions thanks to accurate thermoregulation combined with the use of inverter technology. The accurate design and use of innovative variable speed motors (inverters) ensure a high level of energy efficiency both at full and partial load. The heat pump for every need System efficiency The unit is designed with a system approach: all components are synergistically regulated according to proprietary logics to maximize the unit's efficiencies. High efficiency at partial loads High seasonal efficiency values, thanks to the modulation of the compressor with DC inverter technology that guarantees the exact energy corresponding to the real needs of the building. High efficiency that translates into reduced energy consumption throughout the working period of the unit. Comfort applications Residential buildings Commercial premises Infrastructures for entertainment Executive offices Hotels and Resorts Health facilities Centralized systems can be created with cascade systems ErP Ready Thanks to inverter technology, i-BX-N complies with the ErP directive, exceeding the minimum seasonal energy efficiency requirements in heating, SCOP, for both low temperature and medium temperature applications. Silent operation : Noise emissions are reduced thanks to the modulation of the compressor frequency and fan speed Reduced consumption : The dynamic control of the water flow temperature based on the external air temperature significantly increases the comfort and energy efficiency of the system. Domestic hot water : The production of domestic hot water is guaranteed all year round. The controller manages the production of hot water via a 3-way valve to be installed externally to the unit Ease of installation : The i-BX-N heat pumps are of the “packaged” monobloc type, particularly simple to install. The hydraulic components are all contained inside the unit and the connection pipes are of the hydraulic type, therefore it is not necessary to carry out the procedures typical of direct expansion air conditioning systems. Intelligent management of your system Nadisystem guarantees centralized regulation of the system ensuring: Easy communication between different components Simplified installation Reduced number of checks Integration between different sources Nadisystem integrates different energy sources based on availability, yields and costs of their use, always favoring renewable sources. The auxiliary sources are activated to satisfy the building's needs at low external temperatures by integrating the thermal power of the heat pump Customization of the system Nadisystem has several special functions that allow you to customize the system for every need. The controller is able to regulate two zones in both heating and cooling and with different flow temperatures, making the i-BX-N heat pump compatible with different types of systems with different water temperature levels. Cascading unit management In case of high thermal needs, it is possible to connect up to 4 units of the same power, optional configuration. The cascade configuration is managed in master/slave mode, with the master unit managing the information and transmitting it to the slave units. Structure Structure made of a base and self-supporting panels in hot-dip galvanized steel, painted with RAL 7035 polyester powders. Solidity and robustness Maximum accessibility for service and maintenance operations Fans Axial fans with continuous speed regulation that provide improved air distribution, achieving low consumption and minimising noise levels Drums Condenser with copper tubes and aluminum fins Battery protection grids as standard up to size 015 Control Keyboard with LCD display and electronic menu adjustment NADICompact Function keys Graphic display and icons allow quick and easy consultation and intervention on the unit by means of a multi-level menu NADISYSTEM Control Setting the water set point with a fixed or dynamic value with a climatic curve. Antifreeze protection depending on water temperature and outside air temperature. Production of domestic hot water. 4Management of external auxiliary sources. Two zones with different water temperature distribution Digital input for night function (Night mode). Remote connectivity to BMS systems via serial card (accessory). Cascade System Management In case of high thermal requirements, it is possible to connect up to 4 units of the same power in cascade Managed in master slave mode, with the master unit taking care of processing the information and then transmitting it to the slave units High degree of partialization of the power supplied, without decreasing performance, and a precise sizing of the system Possibility to dedicate one or all units to the production of domestic hot water. Integrated hydronic group All hydraulic components for installation are already included without any increase in unit size. EC pump, brushless motor with electronic commutation to guarantee low consumption and high system efficiency Flow switch, to protect the exchanger for low water flow rates Safety valve. Expansion vessel. Air vent valve. Mesh filter, not fitted but supplied with the unit Evaporator Brazed plate exchanger in AISI 316 steel, externally coated with anti-condensation closed-cell neoprene mat (CFC and HCFC-free). Electric thermostatic resistance to protect against ice formation inside. Low pressure drops and optimised heat exchange Refrigerant circuit Electronic expansion valve as standard Optimized coolant flow Precise and effective temperature control Quick adjustment and high efficiency Compressor Mitsubishi Electric compressors, synonymous with quality, reliability and performance at partial loads. Compressor installed on rubber anti-vibration supports and acoustically isolated by special sound-absorbing material. Special anti-freeze function Dedicated algorithms prevent the formation of ice inside by managing the operation Of the electrical resistance on the plate exchanger. Of the pump based on the outside air temperature. Of the flow switch in case of lack of flow The unit is also designed to operate with non-freezing mixtures up to an exchanger outlet temperature of -8°C. Accessories Remote keyboard Wired room terminal with backlit display, complete with temperature and humidity probe Cascade unit management kit Domestic hot water storage probe and inertial storage probe Copper-Aluminum type batteries with epoxy coating Copper-Copper type batteries Hydraulic separator Hot water storage Antifreeze electric resistance for base and auxiliary condensation collection tray RS485 serial card for ModBus protocol Rubber base anti-vibration mounts Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : Magis Combo 9 V2 Product code : 3.030613 Energy efficiency Heating efficiency class at 35° C : A+++ Heating efficiency class at 55° C : A++ Sanitary energy efficiency class: A Load profile : XL Heating COP with water set at 35 °C: 4.81 Heating COP with water set at 45 °C: 3.69 Heating COP with water set at 55 °C: 2.93 EER cooling with water set at 7 °C : 3.33 EER cooling with water set at 18 °C : 4.12 Performance   Heating Useful power in heating with water set at 35° C: 9.00 kW Useful power in heating with water set at 45° C: 8.60 kW Useful power in heating with water set at 55° C: 8.00 kW Heating temperature range : 20° ~ 65° C Cooling down Useful power in cooling with water set at 7 °C: 6.50 kW Useful power in cooling with water set at 18 °C: 8.70 kW Cooling temperature range : 5 ~ 25°C Technical data of the indoor condensing unit Power absorbed by the heat generator circulator: 60 W Power absorbed by the heat pump circulator: 52 W Maximum nominal heat input in DHW: 28.1 kW Maximum nominal heat input in heating mode: 24.9 kW Minimum nominal heat input: 5.1 kW Maximum useful thermal power in DHW: 27.3 kW Maximum useful thermal power in heating: 24.0 kW Minimum useful thermal power: 4.8 kW Heating temperature range : 20° ~ 80° C NOX class : 6 Specific flow rate in continuous domestic hot water service (∆t 30 °C): 13.1 l/min System expansion vessel: 8.3 litres Hydronic circuit maximum operating pressure: 3 bar Water content : 2.8 litres Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operating range - Cooling: -10° ~ 46°C - Heating: -25° ~ 35° C - DHW : -25° ~ 43° C Installation data Liquid piping diameter : 6.35 mm (¼”) Gas pipe diameter : 15.88 mm (5⁄8") Dimensions and weight External unit dimensions (WxHxD): 940x998x384 mm Weight of the outdoor unit when empty: 73.0 Kg Internal unit dimensions (WxHxD): 440x787x400 mm Weight of the internal unit when empty: 55.8 Kg Heat pump Reversible split hybrid heat pump Immergas MAGIS COMBO V2 Heat and condensing pump: the intelligence and efficiency of the hybrid The stringent regulations on new homes and major renovations push towards advanced forms of air conditioning with a view to reducing consumption, environmental impact and harmful emissions . The range of IMMERGAS heat pumps is designed to provide great comfort by creating electric systems for heating, cooling and domestic hot water production MAGIS COMBO V2 is the " factory made " hybrid solution by Immergas, designed and assembled directly in the factory in Brescello di Reggio Emilia, which heats, cools and produces hot water. Consisting of an outdoor unit and an indoor condensing unit for the highest requirements, it is available in various powers, from 4 to 16 kW. MAGIS COMBO V2 instant version The series connection to the separate storage tank also makes it possible to integrate solar thermal for the production of hot water. The DHW inlet probe is optional. The instantaneous version represents the ideal solution for replacing old generators even on systems with temperatures up to 80 °C. The internal unit of the MAGIS COMBO V2 consists of a condensing generator and an integrated hydronic module for the exchange of energy between the cooling circuit and the water circuit of the system. While the outdoor unit is available in single-phase version for 4, 6 and 9 kW models with R32 refrigerant gas and in single-phase and three-phase 12, 14 and 16 kW version with R410A refrigerant gas. The range from 4 to 14 kW is in class A+++ . MAGIS COMBO V2 can be installed in confined spaces both recessed and indoors. Solutions for new homes MAGIS COMBO V2 expands the Immergas offer of "split" solutions, born with MAGIS PRO V2, which must be installed by qualified professionals with an F-GAS license for the refrigerant connections between the 2 units. It is ideal for obtaining very high energy classes in new residential buildings. Compact and built-in solution The generators are very well integrated to give advantages from an installation point of view and reduce overall dimensions. MAGIS COMBO PLUS V2, using the necessary accessories, can also be inserted inside the SOLAR CONTAINER COMBO recessed frame or combined with the new SUPER TRIO and SUPER TRIO TOP system both in the indoor frame and in an internal room in a dedicated technical cabinet. Less aesthetic impact The outdoor unit is smaller than a normal hydronic heat pump, allowing for flexibility of placement outside the home or on a balcony. Indoor unit New R32/water exchanger with 72 plates Stainless steel condensing module System expansion vessel 10 litres Flowmeter to enable the operation of the refrigerant circuit only in the presence of sufficient circulation in the system 7 m ac system circulator associated with the operation of the refrigerant circuit (which in the PLUS version can also manage the domestic hot water) 7 m ac system circulator associated with the operation of the internal condensing unit New electronics designed to directly manage 3 zones, one direct and two mixed Standard shut-off valves and ¾” filter Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! IN CASE OF UNAVAILABILITY IMMEDIATELY, THE PRODUCT WILL BE ORDERED AND SHIPPED WITHIN 10 WORKING DAYS COMMISSIONING INCLUDED Heating Water 35/30°C External air 7°C Capacity : 3 6.35 / 7.41 kW COP 4.95 Cooling Water 18/23°C External air 35°C Capacity: 6.50 / 7.65 EER: 4.80 Energy efficiency Heating with average water flow temperature at 55°C SCOP : A++ ηs : 138% SCOP - 3.52 Heating with average water flow temperature at 35°C SCOP - 4.95 ηs : 195% Energy class: A+++ Technical features: Power supply Voltage/Frequency/Phases V/Hz/n° 230/50/1 Water flow rate Water 35/30°C External air 7°C Nominal l/s 0.30 Expansion vessel capacity l 4.8 Sound power Minimum / Nominal dB(A) 55/58 Sound pressure @1m Minimum / Nominal dB(A) 41/44 Operating field Water flow temperature Heating / DHW Full electric Minimum / Maximum °C 25 / 65 Hybrid Minimum / Maximum °C 25 / 75 Cooling - Minimum / Maximum °C 5 / 25 Operating range (outside air) -Heating / DHW - Minimum / Maximum °C -25 / 43 -Cooling - Minimum / Maximum °C -5 / 43 Dimensions and weight Dimensions WxHxD mm 1.295x717x426 mm Net weight: 86 Kg Monobloc Air-Water Heat Pump R-32 EDGE EVO 2.0 - EXC Hybrid or full electric monoblock heat pump , compact, efficient and very quiet. Perfect for new systems or upgrading existing ones, with the possibility of managing up to 6 units in cascade and optimizing the energy produced by a thermodynamic or photovoltaic solar system. ✓ Space saving: installed outside, no internal unit required ✓ Designed for harsh climates: excellent performance at low temperatures and optional auxiliary resistors from 3 to 9 kW ✓ Simultaneous production of DHW and cooling / heating (Hybrid version) ✓ Modular: combines up to 6 units in cascade for power up to 180 kW ✓ Advanced connectivity: management via dedicated MSmartHome App or via Modbus port with CONTROL4 NRG included as standard Without worries Edge EVO 2.0 - EXC in Hybrid version is the solution designed to update old generators without having to modify the system. The system is in fact extremely versatile and can adapt to what already exists: it simply replaces the generator that produces Heating and Domestic Hot Water, improving comfort and efficiency, but without too many worries. ENERGY SAVING Solar ACS integration (ACS tank - optional) Waterfall Smart Grid ready €-Switch COMFORT Hot cold ACS Silent MANAGEMENT AND CONNECTIVITY Input ON/OFF Keymark Clivet Eye Monitoring Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! IN CASE OF UNAVAILABILITY IMMEDIATELY, THE PRODUCT WILL BE ORDERED AND SHIPPED WITHIN 10 WORKING DAYS COMMISSIONING INCLUDED Heating Water 35/30°C External air 7°C Capacity : 8.40 / 9.11 kW COP 5.15 Cooling Water 18/23°C External air 35°C Capacity: 8.30 / 11.1 EER: 5.05 Energy efficiency Heating with average water flow temperature at 55°C SCOP : A++ ηs : 131% SCOP - 3.37 Heating with average water flow temperature at 35°C SCOP - 5.22 ηs : 205% Energy class: A+++ Technical features: Power supply Voltage/Frequency/Phases V/Hz/n° 230/50/1 Water flow rate Water 35/30°C External air 7°C Nominal l/s 0.40 Expansion vessel capacity l 4.8 Sound power Minimum / Nominal dB(A) 54/59 Sound pressure @1m Minimum / Nominal dB(A) 40/45 Operating field Water flow temperature Heating / DHW Full electric Minimum / Maximum °C 25 / 65 Hybrid Minimum / Maximum °C 25 / 75 Cooling - Minimum / Maximum °C 5 / 25 Operating range (outside air) -Heating / DHW - Minimum / Maximum °C -25 / 43 -Cooling - Minimum / Maximum °C -5 / 43 Dimensions and weight Dimensions WxHxD mm 1,385x864x523 mm Net weight: 105 Kg Monobloc Air-Water Heat Pump R-32 EDGE EVO 2.0 - EXC Hybrid or full electric monoblock heat pump , compact, efficient and very silent. Perfect for new systems or upgrading existing ones, with the possibility of managing up to 6 units in cascade and optimizing the energy produced by a thermodynamic or photovoltaic solar system. ✓ Space saving: installed outside, no internal unit required ✓ Designed for harsh climates: excellent performance at low temperatures and optional auxiliary resistors from 3 to 9 kW ✓ Simultaneous production of DHW and cooling / heating (Hybrid version) ✓ Modular: combines up to 6 units in cascade for power up to 180 kW ✓ Advanced connectivity: management via dedicated MSmartHome App or via Modbus port with CONTROL4 NRG included as standard Without worries Edge EVO 2.0 - EXC in Hybrid version is the solution designed to update old generators without having to modify the system. The system is in fact extremely versatile and can adapt to what already exists: it simply replaces the generator that produces Heating and Domestic Hot Water, improving comfort and efficiency, but without too many worries. ENERGY SAVING Solar ACS integration (ACS tank - optional) Waterfall Smart Grid ready €-Switch COMFORT Hot cold ACS Silent MANAGEMENT AND CONNECTIVITY Input ON/OFF Keymark Clivet Eye Monitoring Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less