Overview
GAS WATER HEATER JUNKERS HYDROCOMPACT OUTDOOR WTD 12 AM EO (12 LT) LPG 2 - FORCED DRAFT Sealed Chamber Water Heaters: Junkers Hydrocompact Outdoor, the new compact, quick and easy outdoor water heater.
IN THE ABSENCE OF THE PRODUCT, THE NEW MODEL THERM 5600 SO 12 LPG WILL BE SUPPLIED
Technical specifications
DHW energy efficiency class (ErP): A
Catalog code: WTD 12 AM EO
Gas instantaneous water heater
External installation
Flame ionisation electronic ignition
2 - Forced draft sealed chamber water heaters
Nominal heat output: 20.8 kW
Nominal heat input: 22.5 kW
Efficiency at 100% of rated power: 92%
Efficiency at 30% of rated power: 94%
Water flow rate supplied with DT 25 C: 12 l/min
Maximum working pressure: 12 bar
Minimum operating temperature with antifreeze kit: -25C (standard)
Remote control: Standard
Display: LCD multifunction (in remote control)
degree of protection: IPX5D
Dimensions (LxWxH): mm 170x300x568
Version: LPG
Features list
Hydrocompact Outdoor: Compact gas instantaneous water heaters for indoor use
Finally out! HYDROCOMPACTOUTDOOR the new water heater in the Junkers range specially designed for outdoors: easy to install, simple to program.
Outside with tranquillity
HYDROCOMPACTOUTDOOR the new water heater designed for outdoors which expands the range of Junkers solutions for the production of domestic hot water. Thanks to the standard anti-freeze device and the IPX5D electrical protection degree, which represents one of the highest protection indexes against the infiltration of water and dust, HYDROCOMPACTOUTDOOR is resistant to the cold (up to -25 C) and bad weather, without any further precautions.
Simple to install and operate
Replacing your appliance with the new HYDROCOMPACT OUTDOOR has never been so simple! The new Junkers water heater, in fact, does not require any suction or flue gas system. The absence of suction and discharge pipes translates into minimal masonry work and extremely reduced installation times: in a single word, greater savings! HYDROCOMPACTOUTDOOR can be easily managed from inside the home, in an easy and intuitive way, thanks to the large display of the remote control. With a simple click it is possible to program the water heater to modify the hot water temperature at any time, to always have the maximum desired sanitary comfort.
Small consumption, great performance
HYDROCOMPACTOUTDOOR is presented on the market with a 1 liter plus: the completeness of the range, made up of 12, 15 and 18 l/min appliances, makes it possible to satisfy all comfort needs, from the smallest to the most complex. Furthermore, thanks to the high efficiency at the wide modulation range (1:7) the water heater is able to adapt the consumption of gas necessary to heat the water to the real demand for sanitary water withdrawal, thus guaranteeing all the sanitary comfort you desire and maximum savings. Furthermore, HYDROCOMPACTOUTDOOR can be directly connected to thermal solar systems for the production of domestic hot water.
Characteristics:
Instantaneous water heaters, 2 - Forced draft sealed chamber water heaters, with electronic temperature control (stability, ¤ 1C)
For outdoor installations
It does not require aspiration/flue gas systems
Resistant to bad weather thanks to the anti-gel device (up to -25 C) and the IPX5D electrical protection degree
Efficiency final 94%
Directly connectable to thermal solar systems for the production of domestic hot water, by means of a special TWM 20 mixing valve
Management from inside the home, easy and intuitive, thanks to the remote control with large LCD display for temperature regulation and viewing of information relating to appliance operation
Flexibility of installation thanks to the compact dimensions.
Furthermore, installing the remote control is very easy: it is not necessary to open the product because the electrical connection cable is positioned outside the water heater.
Possibility of satisfying all comfort needs thanks to the completeness of the range, made up of 12, 15 and 18 l/min appliances
High sanitary comfort reduction of gas consumption thanks to electronic temperature control (stability, ¤ 1C)
Reduction of consumption thanks to the wide modulation intervals (1:7)
Elegant design
The ErP legislation and the new energy labels
The future of heating systems
Starting from 26 September 2015, heating systems for the production of hot water, in order to be placed on the market, will have to comply with the ErP regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of appliances, favoring comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating the production of domestic hot water. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding less performing technologies from the market.
The energy label will be supplied by the manufacturer with the appliance and will represent a concrete help for the consumer, allowing him to better understand the characteristics of the system, acquire greater awareness of energy saving, allowing him to choose better what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions.
The ErP legislation provides for two types of labelling:
the first is supplied by the manufacturer together with the product for heating/domestic hot water production appliances
the second for systems composed of several elements.
In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing for an increase in the score attributed to each appliance and increasing the energy class of the system: therefore, it is the task of those who make/install the system to provide the consumer with the correct explanatory label.
The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on consumption in the home, approximately 80% of which is due to heating and the production of hot water, and are now tax-incentivized.
Junkers Bosch is already in line with the dictates of the ErP legislation, demonstrating the orientamental futur that has always distinguished the brand.
Warranty
All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.