icon Immergas Avio 24 LPG Open Chamber Gas Boiler With 45 Lt Boiler | CaldaieMurali

Immergas Avio 24 LPG Open Chamber Gas Boiler With 45 Lt Boiler

Description

AVAILABLE TO ORDER

Technical features
 
Product code: 3.025593
 
Characteristics:

Class C heating energy efficiency
Sanitary Energy Efficiency Class B
Maximum nominal heat input kW (kcal/h) 26.2 (22,546)
Minimum nominal heat input kW (kcal/h) 11.0 (9,500)
Maximum useful thermal power kW (kcal/h) 23.7 (20,382)
Minimum useful thermal power kW (kcal/h) 9.5 (8,170)
Gas flow rate to the burner (methane) max/min m3 /h 2.77/1.17
Specific flow rate ∆T 30 °C (max. 10 min. withdrawal of domestic water) l/min 13.5*
Nominal heating expansion vessel capacity (total) liters 10.0 (7.7)
Nominal DHW expansion vessel capacity (total) standard liters 2.0 (1.2)
Electrical protection degree IP X4D
Dimensions H x W x D: 900 x 580 x 380
Power supply: LPG

General characteristics

AVIO 24

Conventional wall mounted boiler, with 45 liter stainless steel boiler. Ideal for replacing old boilers in the presence of branched collective flues.

IDEAL FOR CONNECTION TO EXISTING BRANCHED COLLECTIVE FLUES AVIO 24 ErP complies with the thermal efficiency value (at 30% of the load) envisaged by Article 4, paragraph 7 of Presidential Decree 59/09 for cases of mere replacement of the boiler, with connection to branched collective flues (ccr

COMPACT DIMENSIONS The small dimensions allow easy installation even in case of replacement with storage boilers.

45 LITERS BOILER Excellent production of domestic hot water thanks to the 45 liter boiler built entirely in steel

SIMPLICITY OF USE The boiler electronics allow you to view the settings via LEDs; three practical knobs allow the appliance to be controlled.

REDUCED ELECTRIC CONSUMPTION In compliance with the new ErP directive, the boiler is equipped with a low energy consumption circulator. Standard 2-litre sanitary expansion vessel

In compliance with the new ErP directive, the boiler is equipped with a low energy consumption circulator.

IMMERGAS IS READY TO DO ITS PART FOR THE ENVIRONMENT!

It is a very important directive established by the European Union and at the same time a decisive road that will lead all of Europe to reduce pollution and improve citizens' lives. The ErP directive (2009/125/EC) - the acronym stands for "Energy Related Products" - in fact sets very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements for energy and environmental performance for instruments that consume energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central purposes of the legislation:

INCREASE THE ENERGY EFFICIENCY OF ENERGY USING MACHINES BY 20%

REDUCE EMISSIONS OF CARBON DIOXIDE (CO2 ) INTO THE ATMOSPHERE BY 20%

REACH A PERCENTAGE OF RENEWABLE ENERGY ON THE FINAL CONSUMPTION OF 20%

Two dates in particular have been established to dictate the timing of the adjustment. From 1 AUGUST 2015 it is mandatory to place appliances equipped with low-consumption circulators on the market. From 26 SEPTEMBER 2015 the ErP and ELD Directives officially come into force with the obligation to place appliances with an energy label on the market. Placing on the market means the first billing by Immergas to the retailer. If the appliance was placed on the market before 1 August/26 September 2015, it can be sold, installed and put into service without time limits. The ErP and ELD provisions are not retroactive


ELD DIRECTIVE: EVERYTHING CLEAR ON THE LABEL The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The Labeling Directive (2010/30/EC) in fact requires that each item subject to the ErP Directive be equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power . IMMERGAS PARTICIPATES IN THESE ADJUSTMENTS WITH PARTICULAR CONVICTION, AWARE THAT ONLY A MARKET THAT ENCOURAGES HIGHER ENERGY EFFICIENCY TECHNOLOGIES CAN BE RESPECTFUL FOR THE ENVIRONMENT.

Product guarantee: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Immergas Avio 24 LPG Open Chamber Gas Boiler With 45 Lt Boiler

Product form

AVAILABLE TO ORDER Technical features   Product code: 3.025593   Characteristics: Class C heating energy efficiency Sanitary Energy Efficiency Class... Read more

€1.757,00 Incl. VAT

    Description

    AVAILABLE TO ORDER

    Technical features
     
    Product code: 3.025593
     
    Characteristics:

    Class C heating energy efficiency
    Sanitary Energy Efficiency Class B
    Maximum nominal heat input kW (kcal/h) 26.2 (22,546)
    Minimum nominal heat input kW (kcal/h) 11.0 (9,500)
    Maximum useful thermal power kW (kcal/h) 23.7 (20,382)
    Minimum useful thermal power kW (kcal/h) 9.5 (8,170)
    Gas flow rate to the burner (methane) max/min m3 /h 2.77/1.17
    Specific flow rate ∆T 30 °C (max. 10 min. withdrawal of domestic water) l/min 13.5*
    Nominal heating expansion vessel capacity (total) liters 10.0 (7.7)
    Nominal DHW expansion vessel capacity (total) standard liters 2.0 (1.2)
    Electrical protection degree IP X4D
    Dimensions H x W x D: 900 x 580 x 380
    Power supply: LPG

    General characteristics

    AVIO 24

    Conventional wall mounted boiler, with 45 liter stainless steel boiler. Ideal for replacing old boilers in the presence of branched collective flues.

    IDEAL FOR CONNECTION TO EXISTING BRANCHED COLLECTIVE FLUES AVIO 24 ErP complies with the thermal efficiency value (at 30% of the load) envisaged by Article 4, paragraph 7 of Presidential Decree 59/09 for cases of mere replacement of the boiler, with connection to branched collective flues (ccr

    COMPACT DIMENSIONS The small dimensions allow easy installation even in case of replacement with storage boilers.

    45 LITERS BOILER Excellent production of domestic hot water thanks to the 45 liter boiler built entirely in steel

    SIMPLICITY OF USE The boiler electronics allow you to view the settings via LEDs; three practical knobs allow the appliance to be controlled.

    REDUCED ELECTRIC CONSUMPTION In compliance with the new ErP directive, the boiler is equipped with a low energy consumption circulator. Standard 2-litre sanitary expansion vessel

    In compliance with the new ErP directive, the boiler is equipped with a low energy consumption circulator.

    IMMERGAS IS READY TO DO ITS PART FOR THE ENVIRONMENT!

    It is a very important directive established by the European Union and at the same time a decisive road that will lead all of Europe to reduce pollution and improve citizens' lives. The ErP directive (2009/125/EC) - the acronym stands for "Energy Related Products" - in fact sets very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements for energy and environmental performance for instruments that consume energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central purposes of the legislation:

    INCREASE THE ENERGY EFFICIENCY OF ENERGY USING MACHINES BY 20%

    REDUCE EMISSIONS OF CARBON DIOXIDE (CO2 ) INTO THE ATMOSPHERE BY 20%

    REACH A PERCENTAGE OF RENEWABLE ENERGY ON THE FINAL CONSUMPTION OF 20%

    Two dates in particular have been established to dictate the timing of the adjustment. From 1 AUGUST 2015 it is mandatory to place appliances equipped with low-consumption circulators on the market. From 26 SEPTEMBER 2015 the ErP and ELD Directives officially come into force with the obligation to place appliances with an energy label on the market. Placing on the market means the first billing by Immergas to the retailer. If the appliance was placed on the market before 1 August/26 September 2015, it can be sold, installed and put into service without time limits. The ErP and ELD provisions are not retroactive


    ELD DIRECTIVE: EVERYTHING CLEAR ON THE LABEL The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The Labeling Directive (2010/30/EC) in fact requires that each item subject to the ErP Directive be equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power . IMMERGAS PARTICIPATES IN THESE ADJUSTMENTS WITH PARTICULAR CONVICTION, AWARE THAT ONLY A MARKET THAT ENCOURAGES HIGHER ENERGY EFFICIENCY TECHNOLOGIES CAN BE RESPECTFUL FOR THE ENVIRONMENT.

    Product guarantee: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.
    Data sheetData sheet
    • peso: 30.0 kg
    • classe energetica produzione acs: B
    • classe energetica riscaldamento: C
    • gas: LPG
    • marca: IMMERGAS
    • metri quadri : 120
    • modello: CALD_192401
    • potenza in kw: 24
    • potenza nominale: 24
    • superficie riscaldabile mq: 120
    Shipping detailsShipping details

    The order is processed according to the payment method chosen:

    for payments by CREDIT CARD, PAYPAL, MARK, the order is processed the same day. Orders placed before 2.00 pm will be managed on the same day. The BRT or GLS courier will collect the ordered goods from our warehouses the following morning.

    Subsequently, the courier assigns the shipment number (tracking number) and communicates the same to the customer via e-mail, allowing him to follow the delivery status and estimated times in real time on the brt.it or gls-grop.com website. 24-72 the courier will deliver the goods (excluding islands and disadvantaged areas) to the address indicated by the Customer at the time of order confirmation. Transport costs are charged to the customer and are calculated taking into account the volume and/or weight of the ordered item/s. However, product delivery times vary according to the requested item, payment methods and the delivery times chosen by the Customer, which is why the times indicated are merely indicative and cannot be considered binding for Decidiprezzo srl. Orders placed online are delivered throughout Italy, with the exception of Livigno, Campione d'Italia, Vatican City and the Republic of San Marino. In some periods of the year (summer period / Christmas period) the processing times could undergo changes compared to the standard ones declared above.

    NB: In the periods of July and August due to the high amount of orders, delivery times could be delayed

    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Recensioni di CaldaieMurali.it

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account