icon Galletti Art-U 10 Fan Coil Fan Coil 0.73 Kw White Design | CaldaieMurali

Galletti Art-U 10 Fan Coil Fan Coil 0.73 Kw White Design

Description

Galletti Fan Coil Fan Coil ART-U 10 0.73 kW White design


  • Total cooling output 0.69 kW
  • Water flow rate 116 l/h
  • Heating output 0.73 kW
  • Water flow rate 126 l/h
  • Nominal air flow 141 m3h
  • Absorbed power W 5
  • Overall sound power dB(A) 44
  • Dimensions HxL 616x711; 12kg

ARTHUR

Design fan coil only 10 cm deep and BLDC motor

Innovation guided by design The new ART-U is born from the great experience of Galletti in the development and design of fan coils and as confirmation of its continuous search for innovation, the result of a perfect combination between performance and design. The objective achieved by this project is absolutely ambitious: a new and unique product, not yet present on the market, which on the one hand is capable of responding to increasingly stringent requests in terms of energy efficiency, on the other meeting for the first turn the recent furniture and interior design trends.

With the new ART-U, Galletti completely hits this target, presenting a new concept of hydronic unit on the market, a product that is characterized by its enviable technical performance and at the same time represents a real stylistic shift in a sector accustomed for too long to products that are very similar to each other. ART-U, with its depth that in some points is just 10 cm, and thanks to its unique lines, was conceived to be an absolutely transversal product, which adapts perfectly both to rigorous and essential environments, and to more warm and sophisticated.

Thanks also to the possibility of customizing the front panel, ART-U satisfies the request for ever greater customization of the spaces to be furnished. The achievement of very high aesthetic standards has not weakened the usual constructive virtuosity of Galletti products: the search for innovation has in fact also concentrated on the components and on the use of new materials. With ART-U the state of the art has been redefined also in terms of technical performance, thanks to the use of computational fluid dynamics simulations for the optimization of the heat exchange inside the terminal combined with the use of permanent magnet electric motors.

Design furniture The elegant front panel is made up of two aluminum sheets with a polyethylene core and possible polyester-based surface painting. It is a light but very resistant material, created for facade cladding in the building sector. The side panels are in UV stabilized ABS to keep the color unchanged over time. The polyethylene core acts as a flexible filling and thermal insulator while the aluminum gives structurality and aesthetics.

Conveyors In high density polystyrene. They are designed to optimize the aeraulic flow inside the hydronic terminal, allowing for optimal distribution of the air flow in the coil and low noise at any operating regime.

Upper grille Made up of adjustable anodized aluminum fins, available in the version for on-board or wall-mounted control. The ABS combs, supporting the grids, prevent them from bending, always guaranteeing the user's safety.

Front grille It stabilizes the operation of the tangential fan, it is equipped with a stainless steel metal filter.

Electric motor Permanent magnet BLDC motor with inverter integrated in the fan unit. The IP44 degree of protection is guaranteed, therefore the access of dust to the inside is prevented and resistance to water splashes is guaranteed.

Tangential fan Statically and dynamically balanced tangential fan to reduce operating noise. The plastic material used for the blades guarantees, compared to metal fans, a reduction of vibrations and absence of bending along the axis of rotation. The blades are interspersed with intermediate reinforcement disks in order to increase their strength.

Heat exchange coils High efficiency turbulence in copper tube and aluminum fins, it is equipped with brass manifolds and vent valve. The hydrophilic treatment is applied as standard on the fins, to increase their effectiveness in cooling and at the same time greater resistance to aggressive atmospheres

Air filter Regenerable filter made of honeycomb polypropylene, easily removable for maintenance operations


Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Galletti Art-U 10 Fan Coil Fan Coil 0.73 Kw White Design

Product form

Galletti Fan Coil Fan Coil ART-U 10 0.73 kW White design Total cooling output 0.69 kW Water flow rate 116... Read more

€355,00 Incl. VAT

    Description

    Galletti Fan Coil Fan Coil ART-U 10 0.73 kW White design


    • Total cooling output 0.69 kW
    • Water flow rate 116 l/h
    • Heating output 0.73 kW
    • Water flow rate 126 l/h
    • Nominal air flow 141 m3h
    • Absorbed power W 5
    • Overall sound power dB(A) 44
    • Dimensions HxL 616x711; 12kg

    ARTHUR

    Design fan coil only 10 cm deep and BLDC motor

    Innovation guided by design The new ART-U is born from the great experience of Galletti in the development and design of fan coils and as confirmation of its continuous search for innovation, the result of a perfect combination between performance and design. The objective achieved by this project is absolutely ambitious: a new and unique product, not yet present on the market, which on the one hand is capable of responding to increasingly stringent requests in terms of energy efficiency, on the other meeting for the first turn the recent furniture and interior design trends.

    With the new ART-U, Galletti completely hits this target, presenting a new concept of hydronic unit on the market, a product that is characterized by its enviable technical performance and at the same time represents a real stylistic shift in a sector accustomed for too long to products that are very similar to each other. ART-U, with its depth that in some points is just 10 cm, and thanks to its unique lines, was conceived to be an absolutely transversal product, which adapts perfectly both to rigorous and essential environments, and to more warm and sophisticated.

    Thanks also to the possibility of customizing the front panel, ART-U satisfies the request for ever greater customization of the spaces to be furnished. The achievement of very high aesthetic standards has not weakened the usual constructive virtuosity of Galletti products: the search for innovation has in fact also concentrated on the components and on the use of new materials. With ART-U the state of the art has been redefined also in terms of technical performance, thanks to the use of computational fluid dynamics simulations for the optimization of the heat exchange inside the terminal combined with the use of permanent magnet electric motors.

    Design furniture The elegant front panel is made up of two aluminum sheets with a polyethylene core and possible polyester-based surface painting. It is a light but very resistant material, created for facade cladding in the building sector. The side panels are in UV stabilized ABS to keep the color unchanged over time. The polyethylene core acts as a flexible filling and thermal insulator while the aluminum gives structurality and aesthetics.

    Conveyors In high density polystyrene. They are designed to optimize the aeraulic flow inside the hydronic terminal, allowing for optimal distribution of the air flow in the coil and low noise at any operating regime.

    Upper grille Made up of adjustable anodized aluminum fins, available in the version for on-board or wall-mounted control. The ABS combs, supporting the grids, prevent them from bending, always guaranteeing the user's safety.

    Front grille It stabilizes the operation of the tangential fan, it is equipped with a stainless steel metal filter.

    Electric motor Permanent magnet BLDC motor with inverter integrated in the fan unit. The IP44 degree of protection is guaranteed, therefore the access of dust to the inside is prevented and resistance to water splashes is guaranteed.

    Tangential fan Statically and dynamically balanced tangential fan to reduce operating noise. The plastic material used for the blades guarantees, compared to metal fans, a reduction of vibrations and absence of bending along the axis of rotation. The blades are interspersed with intermediate reinforcement disks in order to increase their strength.

    Heat exchange coils High efficiency turbulence in copper tube and aluminum fins, it is equipped with brass manifolds and vent valve. The hydrophilic treatment is applied as standard on the fins, to increase their effectiveness in cooling and at the same time greater resistance to aggressive atmospheres

    Air filter Regenerable filter made of honeycomb polypropylene, easily removable for maintenance operations


    Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 49.0 kg
    • marca: Cockerels
    • modello: U10
    • potenza in kw: 1
    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Reviews of CaldaieMurali.it

    feedaty-widget

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account