Ferroli Omnia S Hybrid C 10 kW Air/Water Hybrid Heat Pump for split installation with instantaneous domestic hot water production control included on board the machine
- ERP class in heating A+++
- SCOP (low temperature 35°C) W/W 5.21
- SEER (water produced 7°C) W/W 5.83
- Power supply V-ph-Hz 220/240-1-50
- Type and no. compressors - 1 x Twin Rotary DC
- Type of exchanger plant side / source side - brazed stainless steel plates / finned coil
- Nominal thermal power kW 10.0
- Heating max / min heat input (Hs) kW 27.2 / 3.2
- Max / min heat output heating (80/60°C) kW 24 / 2.8
- Heating max / min heat output (50/30°C) kW 26 / 3.1
- Max / min DHW heat output (Hi) kW 28.5 / 2.9
- Max / min DHW thermal power kW 28.0 / 2.8
- Efficiency Pmax / Pmin (80-60°C) (Hi) % 98.1 / 98
- Efficiency Pmax / Pmin (50-30°C) (Hi) % 106.1 / 107.5
- Efficiency 30% (Hi) % 109.7
- Max / min heating pressure bar 3 / 0.8
- Max / min DHW operating pressure bar 9 / 0.3
- Sanitary flow rate ?t 25°C / 30°C l/min 16.1 / 13.4
Omnia S Hybrid C
> GENERAL FEATURES:
The OMNIA S HYBRID C 3.2 hybrid heat pumps integrate the technology of the ecological R32 heat pump and the condensing boiler with instantaneous domestic hot water production in a single compact product.
The R32 ecological gas manages to combine high efficiency with a reduced environmental impact. Thanks to its GWP of 675, about a third of the GWP of R410a, it helps to reduce CO2 equivalent emissions, the main causes of global warming.
Ferroli Hybrid systems represent the ideal solution for replacing old generators, even on high temperature systems with radiators, thanks to the integration of the boiler.
The compact dimensions similar to those of a wall-mounted boiler make it easy to replace without significant loss of space or heavy renovations. The internal electronics, by activating the boiler or the heat pump as the climatic conditions vary, optimizes
the performance of the system always working in the most economical and efficient way possible, with great advantages for the user. The boiler will be free to produce instantaneous domestic hot water even during heating or cooling operation of the heat pump, maximizing comfort levels. Furthermore, in the unlikely event there is a blockage of the heat pump, the boiler will be able to operate in autonomous backup, guaranteeing heating and domestic hot water.
The system consists of a Full Inverter DC outdoor unit, available in 4 power sizes, associated with a hybrid and condensing indoor unit with integrated hydronic module, complete with DC Inverter pump for managing the cooling circuit. The system is extremely versatile, able to work in harsh climatic conditions down to -20°C outside, avoiding the risk of freezing thanks to the split refrigeration circuit. Wall-mounted smoke outlet in the cases provided for by Legislative Decree 4 July 2014, n. 102.
> OUTDOOR UNIT FEATURES:
- Approved for outdoor operation in a completely uncovered place
- Powered by R32 ecological gas with low environmental impact
- Inrush current and reduced noise thanks to Full Inverter technology
- Compressor with twin rotary type DC INVERTER motor on anti-vibration supports and wrapped in a double layer of sound-absorbing material to reduce vibrations and noise to a minimum
- Axial fans with brushless DC motor complete with protection grilles
- External air temperature probe already installed on the unit.
> INDOOR UNIT FEATURES:
- Robust and also suitable for replacements in particularly critical systems
- Combustion module with 1:10 modulation and thick stainless steel heat exchanger
with increased passages able to maintain high efficiency even on old systems with oxidations and
dirt
- Supplied as standard with system delivery and return angle valves (with inspectable filter)
- MGR: Natural gas, LPG, Propane air Ready, with a simple configuration of the indoor unit is capable
to operate on methane, LPG and propane air without the use of additional kits
- MC2
: Multi Combustion Control, combustion system with patented gas-adaptive technology for a
better adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures)
- FPS: Smoke Protection System. The standard fume clapet valve allows easy connection to systems
pressurized smoke collectives
- Particularly suitable for operation in flues that require ducting
"heavy" thanks to the approval for operation with 50mm diameter flue pipes
- Place of installation: also for outdoors in a partially protected place up to -5°C as standard.
> THE CONTROL SYSTEM
- The interface is equipped with Capsense technology with a 2.8" graphic display, which allows the user to interact with
the product in a simple and practical way. The interface on the machine communicates easily with the new systems
intelligent Connect CRP, which can manage up to 8 thermostats (of which 7 Connect CRP Zones) subdivided
in 2 zones, one direct and one mixed.
- MODBUS PROTOCOL for intelligent management via any external BMS
- HEATING AND COOLING with Full Inverter modulation by Ferroli which allows
the setting of climatic curves to improve consumption and user comfort.
- SMART GRID INPUT FROM PHOTOVOLTAIC AND NETWORK Smart Grid contacts for optimizing consumption and
bill costs. For details, please read the manuals
- REMOTE CONTROL VIA APP. Optional with the Connect CRP, available for iOS and Android
- PDC SILENT MODE. Reduces the maximum frequency of the compressor and the speed of the fan, so
to significantly reduce noise.
- ON/OFF and SUMMER/WINTER from external contacts. The unit can be turned on and off via a contact
external, also receiving the summer/winter switching signals (for example from the zone thermostat). The
operation will follow the controller settings
- ECHO. Dedicated setpoint for “Eco” operation. Settable with daily time band
- WEEKLY TIME PROGRAMMING. The Connect CRP (optional) allows differentiated time programming for each day of the week by defining the mode (COOL/HOT/DHW) and work setpoints for each band.