icon Ferroli Bluehelix K 50 25 Kw Natural Gas Condensing Gas Boiler Complete With Fume Exhaust Kit - New Erp | CaldaieMurali

Ferroli Bluehelix K 50 25 Kw Natural Gas Condensing Gas Boiler Complete With Fume Exhaust Kit - New Erp

Description

FERROLI BLUEHELIX K 50 25 Kw CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP


Characteristics:

  • Seasonal space heating energy efficiency class A
  • Water heating energy efficiency class A
  • Declared load profile XL
  • Heat Capacity (PCI) Min / Max Heating: 5.8 / 25.0
  • Thermal power 80°C-60°C: 5.7 / 24.5
  • Useful thermal efficiency 80°C-60°C Pmax % / Pmin %: 98.0 / 97.8
  • Emission class Nox class 5
  • Boiler capacity 50 litres
  • Domestic hot water production Δt 30°C l/10 min 175
  • Sanitary Manufacturing (EN 13203) ★★★
  • Heating working pressure Max bar 3
  • DHW working pressure Max bar 9
  • Empty weight kg 50
  • Dimensions HxWxD: 800 x 600 x 420
  • Power supply: METHANE


Certified operation also with LPG using a special kit to be requested from the Authorized Assistance Centre


CHARACTERISTICS

  • Boiler body with the new patented primary exchanger in thick AISI 316 TI stainless steel
  • Production of domestic hot water with 50-litre stainless steel domestic hot water storage tank
  • Total premix burner in stainless steel
  • Electronic flame modulation both in heating and DHW
  • Digital control panel
  • Can be combined with the modulating remote timer control
  • Low consumption modulating heating pump (Erp Ready - Class A)
  • Refined design and compact size
  • Casing painted in white by anaphoresis with epoxy powders
  • 3-star certified comfort in sanitary manufacturing according to EN 13203
  • Sliding temperature operation via optional external probe
  • Digital flame control with three re-ignition attempts in case of operation due to lack of flame detection (methane model)
  • Arrangement for recirculation attachments
  • Standard by-pass
  • Place of installation: also for outdoors in a partially protected place up to - 5 ° C as standard

TANGIBLE FACTS

  • max consumption standard non-modulating circulator: 0.085 kW
  • max consumption new high efficiency circulator: 0.04 kW
  • Degree days 2500 (average climate zone E)
  • Energy cost: €0.19/kWh *
  • Hypothetical annual expenditure at max standard circulator speed: €40.375
  • Hypothetical annual expenditure at max speed of high efficiency circulator: €11.4

Therefore, with the replacement of standard boilers with Bluehelix K 50, in line with the new ERP regulations, electricity savings of around 30% can be estimated. In reality, the savings will be even greater, since these are modulating circulators, which at minimum power can reach consumption of up to just 3 W.

  • The low-consumption circulator installed in the Bluehelix K 50 has a variable flow rate, with ΔT control. The advantages o ered are many, including:
  • System start-up from cold: faster start-up with full control of the thermal load on the components
  • Long-lasting maintenance of the temperature equilibrium conditions, once the set point has been reached
  • Better operation in limit conditions (e.g. at minimum power), reduction of on-oFF states
  • Reactivity to variations in the thermal load, an appreciable quality in multi-zone systems

..ROBUST

  • Others are the merits attributable to the circulator chosen for Bluehelix K 50:
  • The PWM signal (pulse width modulation) to the circulator allows extremely rapid intervention times to complete an advanced and complete electronic platform. This results in a drastic reduction of the ON-OFF events of the burner and the circulator.
  • Electronic control of the drive torque at start up with consequent reduction of the risk of blocking. The routine anti-seize cycle is in any case carried out every 24 hours of inactivity.
  • Self-protection function in case of overheating
  • Less noise
  • All this translates into greater longevity not only of the circulator, but also of the components subject to wear and tear from frequent on-off cycles.

COMFORT AND SAFETY

The designers have thought of a series of functions capable of guaranteeing the quality of the domestic water, the best delivery of power to the heating system combined with a longer life for the appliance.

SLIDING TEMPERATURE OPERATION With the installation of the “external probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user.


ANTI-LEGIONELLA FUNCTION In order to keep the storage cylinder in suitable hygienic-sanitary conditions, the product electronics are able to keep it at a temperature of 65°C at programmable time intervals from one to seven days.


ANTI-BLOCK FUNCTION In order to avoid blockage and consequent damage to the heating circulator and the three-way diverter valve, after a set period of inactivity, the boiler electronics activate operation for a few seconds.


ANTIFREEZE FUNCTION In the event that the temperature in the boiler drops to 5°C, the burner automatically turns on and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage.


ECONOMY/COMFORT FUNCTION By activating the appropriate key, heating/temperature maintenance can be excluded by the user (Economy). This makes it possible to reduce fuel consumption during periods of non-use of domestic water


Product Guarantee
All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.



Ferroli Bluehelix K 50 25 Kw Natural Gas Condensing Gas Boiler Complete With Fume Exhaust Kit - New Erp

Product form

FERROLI BLUEHELIX K 50 25 Kw CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP Characteristics: Seasonal space heating... Read more

€1.394,00 Incl. VAT

    Description

    FERROLI BLUEHELIX K 50 25 Kw CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP


    Characteristics:

    • Seasonal space heating energy efficiency class A
    • Water heating energy efficiency class A
    • Declared load profile XL
    • Heat Capacity (PCI) Min / Max Heating: 5.8 / 25.0
    • Thermal power 80°C-60°C: 5.7 / 24.5
    • Useful thermal efficiency 80°C-60°C Pmax % / Pmin %: 98.0 / 97.8
    • Emission class Nox class 5
    • Boiler capacity 50 litres
    • Domestic hot water production Δt 30°C l/10 min 175
    • Sanitary Manufacturing (EN 13203) ★★★
    • Heating working pressure Max bar 3
    • DHW working pressure Max bar 9
    • Empty weight kg 50
    • Dimensions HxWxD: 800 x 600 x 420
    • Power supply: METHANE


    Certified operation also with LPG using a special kit to be requested from the Authorized Assistance Centre


    CHARACTERISTICS

    • Boiler body with the new patented primary exchanger in thick AISI 316 TI stainless steel
    • Production of domestic hot water with 50-litre stainless steel domestic hot water storage tank
    • Total premix burner in stainless steel
    • Electronic flame modulation both in heating and DHW
    • Digital control panel
    • Can be combined with the modulating remote timer control
    • Low consumption modulating heating pump (Erp Ready - Class A)
    • Refined design and compact size
    • Casing painted in white by anaphoresis with epoxy powders
    • 3-star certified comfort in sanitary manufacturing according to EN 13203
    • Sliding temperature operation via optional external probe
    • Digital flame control with three re-ignition attempts in case of operation due to lack of flame detection (methane model)
    • Arrangement for recirculation attachments
    • Standard by-pass
    • Place of installation: also for outdoors in a partially protected place up to - 5 ° C as standard

    TANGIBLE FACTS

    • max consumption standard non-modulating circulator: 0.085 kW
    • max consumption new high efficiency circulator: 0.04 kW
    • Degree days 2500 (average climate zone E)
    • Energy cost: €0.19/kWh *
    • Hypothetical annual expenditure at max standard circulator speed: €40.375
    • Hypothetical annual expenditure at max speed of high efficiency circulator: €11.4

    Therefore, with the replacement of standard boilers with Bluehelix K 50, in line with the new ERP regulations, electricity savings of around 30% can be estimated. In reality, the savings will be even greater, since these are modulating circulators, which at minimum power can reach consumption of up to just 3 W.

    • The low-consumption circulator installed in the Bluehelix K 50 has a variable flow rate, with ΔT control. The advantages o ered are many, including:
    • System start-up from cold: faster start-up with full control of the thermal load on the components
    • Long-lasting maintenance of the temperature equilibrium conditions, once the set point has been reached
    • Better operation in limit conditions (e.g. at minimum power), reduction of on-oFF states
    • Reactivity to variations in the thermal load, an appreciable quality in multi-zone systems

    ..ROBUST

    • Others are the merits attributable to the circulator chosen for Bluehelix K 50:
    • The PWM signal (pulse width modulation) to the circulator allows extremely rapid intervention times to complete an advanced and complete electronic platform. This results in a drastic reduction of the ON-OFF events of the burner and the circulator.
    • Electronic control of the drive torque at start up with consequent reduction of the risk of blocking. The routine anti-seize cycle is in any case carried out every 24 hours of inactivity.
    • Self-protection function in case of overheating
    • Less noise
    • All this translates into greater longevity not only of the circulator, but also of the components subject to wear and tear from frequent on-off cycles.

    COMFORT AND SAFETY

    The designers have thought of a series of functions capable of guaranteeing the quality of the domestic water, the best delivery of power to the heating system combined with a longer life for the appliance.

    SLIDING TEMPERATURE OPERATION With the installation of the “external probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user.


    ANTI-LEGIONELLA FUNCTION In order to keep the storage cylinder in suitable hygienic-sanitary conditions, the product electronics are able to keep it at a temperature of 65°C at programmable time intervals from one to seven days.


    ANTI-BLOCK FUNCTION In order to avoid blockage and consequent damage to the heating circulator and the three-way diverter valve, after a set period of inactivity, the boiler electronics activate operation for a few seconds.


    ANTIFREEZE FUNCTION In the event that the temperature in the boiler drops to 5°C, the burner automatically turns on and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage.


    ECONOMY/COMFORT FUNCTION By activating the appropriate key, heating/temperature maintenance can be excluded by the user (Economy). This makes it possible to reduce fuel consumption during periods of non-use of domestic water


    Product Guarantee
    All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.



    Data sheetData sheet
    • peso: 65.0 kg
    • classe energetica produzione acs: A
    • classe energetica riscaldamento: A
    • gas: Methane
    • marca: Ferroli
    • metri quadri : 150
    • modello: CALD_2409
    • potenza in kw: 25
    • potenza nominale: 25
    • superficie riscaldabile mq: 150
    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Recensioni di CaldaieMurali.it

    feedaty-widget

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account