icon BARGAIN AREA Ferroli BLUEHELIX TECH RRT 34C Low NOx Methane/LPG Condensing Boiler Complete with fume exhaust kit | CaldaieMurali

BARGAIN AREA Ferroli BLUEHELIX TECH RRT 34C Low NOx Methane/LPG Condensing Boiler Complete with fume exhaust kit

Description

ATTENTION THE PRODUCT IS NEW AND CHECKED BY OUR TECHNICIANS, IT HAS TRANSPORT DEFECTS:

  • DEMISES AND LIGHT DENTS ON THE SIDE PANELS
  • NON-STOCK SCREWS ON THE TOP
  • WORN PACKAGING

(FOR MORE DETAILS VIEW THE PHOTOS NEXT TO THE MAIN IMAGE).

ATTENTION Methane, LPG, Propane air Ready through a simple configuration the boiler is able to operate on methane, LPG and propane air without the use of additional conversion kits. For information, contact the authorized service center in your area in advance


Energy label specifications according to European ErP directive

  • Heating energy efficiency Class A
  • Energy efficiency of sanitary equipment XL profile Class A

Heating/sanitary operation features:

  • Thermal input (PCI) Max Heating: 34.0 kW
  • Thermal input (PCI) Max Sanitary: 34.7 kW
  • Thermal power 80°C-60°C Max Heating: 30 kW
  • Thermal power 80°C-60°C Max Sanitary: 34.0 kW
  • Useful thermal efficiency 30%: 109.8%
  • Max. heating operating pressure bar 3
  • Heating expansion vessel capacity 10 litres
  • Degree of protection (IEC 60529) IP X5D
  • Power supply voltage V/Hz 230V / 50Hz
  • Electrical power consumption W 88
  • Dimensions WxHxD mm 420x700x320

5 years without worries

Garanzia 5 Anni

Ferroli BLUEHELIX TECH RRT Boiler Ecological condensing wall-mounted boilers with Ferroli Thermobalance™ combustion cell

The evolution continues..

The generator range is equipped with the proven AISI 304 stainless steel exchanger. Designed and built according to the new ErP directives for eco-friendly design and labelling, BLUEHELIX TECH RRT is at the top of its category.  BLUEHELIX TECH RRT reaches aEnergy efficiency of space heating among the highest in the boiler category: ηs 94%. Furthermore, when combined with the external probe and the remote control, Romeo reaches the A+ system energy class.

Extended warranty with the formula  “5 YEARS WITHOUT WORRIES”

The quality of Bluehelix TECH RRT is beyond discussion, and Ferroli is ready to put it to the test by offering its customers an extended warranty coverage that also ensures periodic maintenance and legal checks.

TOP efficiency even on old systems

The heat exchanger of the thermal group THERMOBALANCE™ of Bluehelix TECH RRT compared to the more classic and widespread steel exchanger used in the past also by the Ferroli Group exclusively on a small series of boilers produced for the English market, and then immediately abandoned in favor of the evolution towards the proprietary steel exchanger used in the Bluehelix models

This geometry allows the THERMOBALANCE thermal group exchanger to operate at almost maximum design efficiency even in conditions of partial clogging, while with the same quantity of deposits and sediments, for example due to  for installation on old systems, the exchanger  It tends to clog much more quickly in the part in contact with the flame due to the reduced area of ​​passage of the fluid, in which a real barrier of deposits is formed  which hinder heat exchange and reduce efficiency below nominal values.


Product Plus

> Water heater with a high thickness stainless steel primary exchanger, with larger passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt

>  It reaches aseasonal efficiency of space heating among the highest in its category: ηs 94% and in combination with the modulating remote control and the optional external probe  reaches the highest efficiency class

> Class 6 NOx : already in line with what is foreseen by the ErP regulation,  NOx emissions < 56mg/kWh.

> MC2 : Mlast Ccombustion Control, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to changing gas network conditions, such as fluctuations or reduced pressures.

> MGR: Methane Gpl Ready, through a simple configuration the boiler is able to operate on both methane and LPG without the use of additional conversion kits

> Exclusive system exchanger-burner with self-cooling door without insulators:  simplifies maintenance and reduces its cost thanks to a smaller number of consumable parts.

> Instant production of domestic hot water with dedicated plate sanitary exchanger

> Hydraulic connections covered by the boiler mantle

> Wide multifunction graphic display backlit for easy and correct parameter setting

> Bypass as standard

> Particularly suitable for operation in flues that require “heavy” piping thanks to the approval for operation with 50mm diameter flue pipes

> FPS : Ssystem of Pprotection Fhum.The flue gas valve inserted as standard on board the boiler allows for easy connection to collective pressurised flue systems

> Designed for simplify and facilitate normal operations of maintenance and cleaning

> Solar system preparation : designed for the production of domestic hot water combined with solar panel systems

> ECO function in sanitary for greater savings in periods of low hot water usage

> 3-star certified comfort in sanitary production according to EN 13203

> Sliding temperature operation via optional external probe

> Low consumption modulating heating circulator

> Digital flame control with three re-ignition attempts in the event of an operating block due to a lack of flame detection, for methane operation only

> Place of installation : also for outdoor use in partially protected areas up to -5°C as standard and up to -15°C with the aid of the optional antifreeze resistance kit


Innovative Ferroli thermal group  THERMOBALANCETM in its 5 elements

Ferroli has oriented the design of the combustion cell and the Bluehelix TECH RRT exchanger in order to maximize the functional advantages and the construction robustness, in addition to the simplicity of maintenance: the single-circuit design ensures that any air bubbles in the system do not remain trapped in the exchanger, and makes cleaning with chemical washing as easy as possible, unlike spiral exchangers with a double parallel circuit.  in which if only one of the circuits gets clogged, the chemical cleaning becomes much more laborious.

  1. Exchanger single circuit stainless steel with high passages, clog-resistant and easy to clean
  2. Burner holder self-cooled without insulation panel
  3. Exclusive stainless steel hemispherical burner special with long-life gasket
  4. Intelligent system “Gas-adaptive” derived from industrial boilers, which monitors and self-stabilizes combustion as the gas + fume conditions vary
  5. Offset fan, to facilitate the maintenance of the thermal group without disassembly. Anti-reflux flap integrated flue gas for connection to CCS

The engine Combustion cell

The tube that constitutes the BLUEHELIX TECH RRT exchanger is made of AISI 304 stainless steel, a material that allows the creation of a extremely smooth surface, therefore less susceptible to attack by encrusting agents and deposits.

Silence at the TOP The new design for comfort

The particularly careful design of BLUEHELIX TECH RRT has made it possible to achieve significant values ​​in terms of silence and acoustic comfort, so much so that it would be almost difficult to distinguish the background noise of a home from the noise produced by the boiler during operation at full capacity. The boiler on/off transients have also been optimised for acoustic comfort, so that the customer will no longer have the inconvenience of understanding whether the boiler is on or off from its noise like on older generations of boilers. The design has also been taken care of, creating a precious casing in 3 removable pieces, which descends to cover the pipe connections.


Remote control Environment and climate

BLUEHELIX TECH RRT can be combined with a wide range of remote timer controls that allow the adjustment and management of the appliance from a distance. The ROMEO series is composed of several models, with weekly or daily comfort programming and with the possibility of choosing for both between wired or wireless connection.

With the connection to the external probe, BLUEHELIX TECH RRT is able to vary the system temperature as a function of the external temperature measured on the basis of configurable climate curves, guaranteeing the user greater comfort as external climate conditions vary. This functionality is internal to the boiler's electronic board and therefore does not require the presence of the remote control, making configuration operations easier in the event of replacement.

ROMEO's modulating function allows for a power modulation of the boiler as it reaches the room temperature value set. This improves the quality of comfort by eliminating heat peaks with consequent energy savings

Boiler control Control panel and functions

The control and management electronics allow the user to customize the operation of the appliance in order to manage the environmental comfort according to your needs. The control panel with buttons and the simple LCD display make programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive. Thanks to the remote connection via bus, this can also be done directly from the Romeo remote control. The board is protected by a fuse that is easily accessible thanks to the dedicated cover and the electrical connections benefit from a robust and large box, with easy-to-access connectors and numerous cable ties. The boiler is also designed to connect a second room thermostat on dedicated terminals to manage multi-zone mixing systems


MC2 Multi-Combustion Control

The electronics controls the flame ionization current to ensure a optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio  and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2 : Multi-Combustion Control, the new combustion system with patented technology gas-adaptive improves the adaptability of use to changing gas network conditions

Easy Maintenance Hassle-free maintenance

At the time of the first maintenance, the technician can realize the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the “Thermobalance”tm thermal group allows maintenance to be performed with maximum precision and speed.

Some examples:

- Internal accessibility is favored by the 3-piece cloak with removable side panels.

- The electrical box of the electronic board can be easily extracted from the chassis and hooked laterally leaving free access to internal parts

- The fan offset from burner and placed underneath, it does not need to be dismantled to access the steel burner-exchanger group

- The burner door it's totally self-cooled air and therefore does not require the insulating panel, avoiding the risk that this may be damaged or broken during dismantling for cleaning.

- The The burner can be dismantled by loosening just 3 bolts leaving free access to the stainless steel exchanger.

- It exchanger with extra-large passages It is designed to challenge the hardest waters and is easy to clean thanks to the single-tube, non-collectorized circuit.

- The input filter of sanitary water can be extract with extreme ease directly from the inside without having to remove the hydraulic connections of the boiler.

- Any dismantling and Replacing the plate exchanger it just happens by removing two bolts Allen key accessible from the front


Simplified replacement Smoke exhaust ø 50 mm

The new boiler can also be installed with 50mm diameter flue pipes. Particularly important in the replacement market in the frequent case of collective flues that require “heavy” intubations where it is necessary to have a high smoke expulsion capacity even with small diameters.

FPS.: Ssystem of Pprotection Fumi. The smoke clapet valve  allows a easy connection to collective pressurized flue systems.  For installers, the collective pressurized flue solution is more economical


Comfort & Safety

The designers have thought of a series of functions capable of guaranteeing the quality of the sanitary water, the best power supply to the heating system combined with a longer life of the appliance.

Stop and Go function

When using sanitary mixer taps, short or very short deliveries for quick rinses cause the boiler ignition procedure to start, which usually ends immediately. The continuation of these «false starts» can, in the long run, compromise the average life of the product. For this reason BLUEHELIX TECH RRT provides an electronic parameter through which it is possible to delay the ignition of the burner  activating it only in the event of actual domestic hot water withdrawals

Sun Easy Function

BLUEHELIX TECH RRT has been designed to be easily inserted into systems created with the latest technologies. The SUN EASY system uses electronics that Simplifies pairing with solar panels both natural and forced circulation.Through a sensor placed on the sanitary circuit it continuously monitors the temperature of the water preheated by the solar panels, providing for the ignition of the burner only in the event that the latter falls below the level necessary to guarantee optimal comfort for the user.

Eco-Comfort Sanitary Function

In ECO mode, the production of domestic hot water occurs according to traditional standards, allowing for energy savings during periods of non-use. In COMFORT mode, thanks to the special system for maintaining the temperature of the heat exchanger, the supply of domestic hot water becomes even faster and more comfortable. Achieving maximum 3-star certified comfort.  Efficiency and load profiles according to ErP directive are top of the class

External installation and anti-freeze function

To make the most of the available space, the new BLUEHELIX TECH RRT 24C boiler can be installed flush with the wall using the special kit. For more critical installations, in completely uncovered places not protected from atmospheric agents, the “painted cabinet” kit is also available. In the event that the temperature in the boiler drops to 5°C, the burner automatically switches on and the circulator is activated in order to protect the appliance from damage caused by frostThis function is active with the boiler powered by the gas circuit and under electrical voltage


Product Warranty : All products for sale on our site are new and packaged. The guarantee on this item is 24 months from the date of purchase.

BARGAIN AREA Ferroli BLUEHELIX TECH RRT 34C Low NOx Methane/LPG Condensing Boiler Complete with fume exhaust kit

Product form

ATTENTION THE PRODUCT IS NEW AND CHECKED BY OUR TECHNICIANS, IT HAS TRANSPORT DEFECTS: DEMISES AND LIGHT DENTS ON THE... Read more

€690,00 Incl. VAT

    Description

    ATTENTION THE PRODUCT IS NEW AND CHECKED BY OUR TECHNICIANS, IT HAS TRANSPORT DEFECTS:

    • DEMISES AND LIGHT DENTS ON THE SIDE PANELS
    • NON-STOCK SCREWS ON THE TOP
    • WORN PACKAGING

    (FOR MORE DETAILS VIEW THE PHOTOS NEXT TO THE MAIN IMAGE).

    ATTENTION Methane, LPG, Propane air Ready through a simple configuration the boiler is able to operate on methane, LPG and propane air without the use of additional conversion kits. For information, contact the authorized service center in your area in advance


    Energy label specifications according to European ErP directive

    • Heating energy efficiency Class A
    • Energy efficiency of sanitary equipment XL profile Class A

    Heating/sanitary operation features:

    • Thermal input (PCI) Max Heating: 34.0 kW
    • Thermal input (PCI) Max Sanitary: 34.7 kW
    • Thermal power 80°C-60°C Max Heating: 30 kW
    • Thermal power 80°C-60°C Max Sanitary: 34.0 kW
    • Useful thermal efficiency 30%: 109.8%
    • Max. heating operating pressure bar 3
    • Heating expansion vessel capacity 10 litres
    • Degree of protection (IEC 60529) IP X5D
    • Power supply voltage V/Hz 230V / 50Hz
    • Electrical power consumption W 88
    • Dimensions WxHxD mm 420x700x320

    5 years without worries

    Garanzia 5 Anni

    Ferroli BLUEHELIX TECH RRT Boiler Ecological condensing wall-mounted boilers with Ferroli Thermobalance™ combustion cell

    The evolution continues..

    The generator range is equipped with the proven AISI 304 stainless steel exchanger. Designed and built according to the new ErP directives for eco-friendly design and labelling, BLUEHELIX TECH RRT is at the top of its category.  BLUEHELIX TECH RRT reaches aEnergy efficiency of space heating among the highest in the boiler category: ηs 94%. Furthermore, when combined with the external probe and the remote control, Romeo reaches the A+ system energy class.

    Extended warranty with the formula  “5 YEARS WITHOUT WORRIES”

    The quality of Bluehelix TECH RRT is beyond discussion, and Ferroli is ready to put it to the test by offering its customers an extended warranty coverage that also ensures periodic maintenance and legal checks.

    TOP efficiency even on old systems

    The heat exchanger of the thermal group THERMOBALANCE™ of Bluehelix TECH RRT compared to the more classic and widespread steel exchanger used in the past also by the Ferroli Group exclusively on a small series of boilers produced for the English market, and then immediately abandoned in favor of the evolution towards the proprietary steel exchanger used in the Bluehelix models

    This geometry allows the THERMOBALANCE thermal group exchanger to operate at almost maximum design efficiency even in conditions of partial clogging, while with the same quantity of deposits and sediments, for example due to  for installation on old systems, the exchanger  It tends to clog much more quickly in the part in contact with the flame due to the reduced area of ​​passage of the fluid, in which a real barrier of deposits is formed  which hinder heat exchange and reduce efficiency below nominal values.


    Product Plus

    > Water heater with a high thickness stainless steel primary exchanger, with larger passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt

    >  It reaches aseasonal efficiency of space heating among the highest in its category: ηs 94% and in combination with the modulating remote control and the optional external probe  reaches the highest efficiency class

    > Class 6 NOx : already in line with what is foreseen by the ErP regulation,  NOx emissions < 56mg/kWh.

    > MC2 : Mlast Ccombustion Control, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to changing gas network conditions, such as fluctuations or reduced pressures.

    > MGR: Methane Gpl Ready, through a simple configuration the boiler is able to operate on both methane and LPG without the use of additional conversion kits

    > Exclusive system exchanger-burner with self-cooling door without insulators:  simplifies maintenance and reduces its cost thanks to a smaller number of consumable parts.

    > Instant production of domestic hot water with dedicated plate sanitary exchanger

    > Hydraulic connections covered by the boiler mantle

    > Wide multifunction graphic display backlit for easy and correct parameter setting

    > Bypass as standard

    > Particularly suitable for operation in flues that require “heavy” piping thanks to the approval for operation with 50mm diameter flue pipes

    > FPS : Ssystem of Pprotection Fhum.The flue gas valve inserted as standard on board the boiler allows for easy connection to collective pressurised flue systems

    > Designed for simplify and facilitate normal operations of maintenance and cleaning

    > Solar system preparation : designed for the production of domestic hot water combined with solar panel systems

    > ECO function in sanitary for greater savings in periods of low hot water usage

    > 3-star certified comfort in sanitary production according to EN 13203

    > Sliding temperature operation via optional external probe

    > Low consumption modulating heating circulator

    > Digital flame control with three re-ignition attempts in the event of an operating block due to a lack of flame detection, for methane operation only

    > Place of installation : also for outdoor use in partially protected areas up to -5°C as standard and up to -15°C with the aid of the optional antifreeze resistance kit


    Innovative Ferroli thermal group  THERMOBALANCETM in its 5 elements

    Ferroli has oriented the design of the combustion cell and the Bluehelix TECH RRT exchanger in order to maximize the functional advantages and the construction robustness, in addition to the simplicity of maintenance: the single-circuit design ensures that any air bubbles in the system do not remain trapped in the exchanger, and makes cleaning with chemical washing as easy as possible, unlike spiral exchangers with a double parallel circuit.  in which if only one of the circuits gets clogged, the chemical cleaning becomes much more laborious.

    1. Exchanger single circuit stainless steel with high passages, clog-resistant and easy to clean
    2. Burner holder self-cooled without insulation panel
    3. Exclusive stainless steel hemispherical burner special with long-life gasket
    4. Intelligent system “Gas-adaptive” derived from industrial boilers, which monitors and self-stabilizes combustion as the gas + fume conditions vary
    5. Offset fan, to facilitate the maintenance of the thermal group without disassembly. Anti-reflux flap integrated flue gas for connection to CCS

    The engine Combustion cell

    The tube that constitutes the BLUEHELIX TECH RRT exchanger is made of AISI 304 stainless steel, a material that allows the creation of a extremely smooth surface, therefore less susceptible to attack by encrusting agents and deposits.

    Silence at the TOP The new design for comfort

    The particularly careful design of BLUEHELIX TECH RRT has made it possible to achieve significant values ​​in terms of silence and acoustic comfort, so much so that it would be almost difficult to distinguish the background noise of a home from the noise produced by the boiler during operation at full capacity. The boiler on/off transients have also been optimised for acoustic comfort, so that the customer will no longer have the inconvenience of understanding whether the boiler is on or off from its noise like on older generations of boilers. The design has also been taken care of, creating a precious casing in 3 removable pieces, which descends to cover the pipe connections.


    Remote control Environment and climate

    BLUEHELIX TECH RRT can be combined with a wide range of remote timer controls that allow the adjustment and management of the appliance from a distance. The ROMEO series is composed of several models, with weekly or daily comfort programming and with the possibility of choosing for both between wired or wireless connection.

    With the connection to the external probe, BLUEHELIX TECH RRT is able to vary the system temperature as a function of the external temperature measured on the basis of configurable climate curves, guaranteeing the user greater comfort as external climate conditions vary. This functionality is internal to the boiler's electronic board and therefore does not require the presence of the remote control, making configuration operations easier in the event of replacement.

    ROMEO's modulating function allows for a power modulation of the boiler as it reaches the room temperature value set. This improves the quality of comfort by eliminating heat peaks with consequent energy savings

    Boiler control Control panel and functions

    The control and management electronics allow the user to customize the operation of the appliance in order to manage the environmental comfort according to your needs. The control panel with buttons and the simple LCD display make programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive. Thanks to the remote connection via bus, this can also be done directly from the Romeo remote control. The board is protected by a fuse that is easily accessible thanks to the dedicated cover and the electrical connections benefit from a robust and large box, with easy-to-access connectors and numerous cable ties. The boiler is also designed to connect a second room thermostat on dedicated terminals to manage multi-zone mixing systems


    MC2 Multi-Combustion Control

    The electronics controls the flame ionization current to ensure a optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio  and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2 : Multi-Combustion Control, the new combustion system with patented technology gas-adaptive improves the adaptability of use to changing gas network conditions

    Easy Maintenance Hassle-free maintenance

    At the time of the first maintenance, the technician can realize the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the “Thermobalance”tm thermal group allows maintenance to be performed with maximum precision and speed.

    Some examples:

    - Internal accessibility is favored by the 3-piece cloak with removable side panels.

    - The electrical box of the electronic board can be easily extracted from the chassis and hooked laterally leaving free access to internal parts

    - The fan offset from burner and placed underneath, it does not need to be dismantled to access the steel burner-exchanger group

    - The burner door it's totally self-cooled air and therefore does not require the insulating panel, avoiding the risk that this may be damaged or broken during dismantling for cleaning.

    - The The burner can be dismantled by loosening just 3 bolts leaving free access to the stainless steel exchanger.

    - It exchanger with extra-large passages It is designed to challenge the hardest waters and is easy to clean thanks to the single-tube, non-collectorized circuit.

    - The input filter of sanitary water can be extract with extreme ease directly from the inside without having to remove the hydraulic connections of the boiler.

    - Any dismantling and Replacing the plate exchanger it just happens by removing two bolts Allen key accessible from the front


    Simplified replacement Smoke exhaust ø 50 mm

    The new boiler can also be installed with 50mm diameter flue pipes. Particularly important in the replacement market in the frequent case of collective flues that require “heavy” intubations where it is necessary to have a high smoke expulsion capacity even with small diameters.

    FPS.: Ssystem of Pprotection Fumi. The smoke clapet valve  allows a easy connection to collective pressurized flue systems.  For installers, the collective pressurized flue solution is more economical


    Comfort & Safety

    The designers have thought of a series of functions capable of guaranteeing the quality of the sanitary water, the best power supply to the heating system combined with a longer life of the appliance.

    Stop and Go function

    When using sanitary mixer taps, short or very short deliveries for quick rinses cause the boiler ignition procedure to start, which usually ends immediately. The continuation of these «false starts» can, in the long run, compromise the average life of the product. For this reason BLUEHELIX TECH RRT provides an electronic parameter through which it is possible to delay the ignition of the burner  activating it only in the event of actual domestic hot water withdrawals

    Sun Easy Function

    BLUEHELIX TECH RRT has been designed to be easily inserted into systems created with the latest technologies. The SUN EASY system uses electronics that Simplifies pairing with solar panels both natural and forced circulation.Through a sensor placed on the sanitary circuit it continuously monitors the temperature of the water preheated by the solar panels, providing for the ignition of the burner only in the event that the latter falls below the level necessary to guarantee optimal comfort for the user.

    Eco-Comfort Sanitary Function

    In ECO mode, the production of domestic hot water occurs according to traditional standards, allowing for energy savings during periods of non-use. In COMFORT mode, thanks to the special system for maintaining the temperature of the heat exchanger, the supply of domestic hot water becomes even faster and more comfortable. Achieving maximum 3-star certified comfort.  Efficiency and load profiles according to ErP directive are top of the class

    External installation and anti-freeze function

    To make the most of the available space, the new BLUEHELIX TECH RRT 24C boiler can be installed flush with the wall using the special kit. For more critical installations, in completely uncovered places not protected from atmospheric agents, the “painted cabinet” kit is also available. In the event that the temperature in the boiler drops to 5°C, the burner automatically switches on and the circulator is activated in order to protect the appliance from damage caused by frostThis function is active with the boiler powered by the gas circuit and under electrical voltage


    Product Warranty : All products for sale on our site are new and packaged. The guarantee on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 35.0 kg
    • classe efficienza energetica: A
    • classe energetica produzione acs: A
    • classe energetica riscaldamento: A
    • gas: Metano/Gpl
    • marca: Ferroli
    • metri quadri : 250
    • modello: AO_1995
    • potenza in kw: 34
    • potenza nominale: 34
    • superficie riscaldabile mq: 250
    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Reviews of CaldaieMurali.it

    feedaty-widget

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account