Lowara Fixed Speed ​​Booster Set With 2 Electric Pumps Code Gmd 20 Ra/5hm06p15t

General characteristics

• Brand: Lowara
• Code: GMD 20 RA/5HM06P15T

Data sheet

Meaning of the product code:

1. GMD 20: Fixed speed group (three-phase)
2. RA: With inlet side check valve
3. 5HM06P15T: Electric pump code

• Number of electric pumps: 2
• Nominal power expressed in kilowatts: 1.5 kW
• Rated power expressed in horse power: 2 hp

Technical specifications for a single electric pump

Other characteristics

• Booster set version: RA (for applications with air cushion autoclaves).

• Main shut-off valves located on the suction and delivery sides of each pump, ball type with threaded connection.
• Check valve on the discharge side of each pump of the spring-loaded type with threaded connection.
• For applications with air-cushion autoclaves, they are mounted on the suction side and the group is provided with an air feeder connection for a G 1/2“ threaded hose (GMD20..RA series).
• AISI 304 stainless steel intake manifold with threaded ends. Threaded connection for water loading.
• Delivery manifold in AISI 304 stainless steel with threaded ends. It has R1" threaded connections with relative caps for connecting any 24 or 20 liter membrane vessels.
• Pressure gauge and 2 pressure switches Pressure gauge and 2 control pressure switches located on the delivery side of the unit.
• Various fittings in nickel-plated brass, galvanized steel or stainless steel depending on the version.
• Support base for pump unit and switchboard bracket in galvanized steel.
• Electrical control panel with IP54 degree of protection.

Control panel

Three-phase power supply electric panel, for the control and protection of, at most, two three-phase electric pumps, with sheet steel case and IP54 degree of protection.

Main features:

• Main door lock switch, fuse holders and fuses, starting contactors and thermal protections such as magnetothermal motor protectors for protection of each motor.
• Standard power supply voltage: 3x400Vac +/-10%, 50/60Hz. On request non-standard voltages, 3x230ca +/-10%, 3x440ca +/-10%, 3x460ca +/-10%, 3x480ca +/-10%, 50/60Hz.
• Transformer for low voltage auxiliary circuit; auxiliary voltage 24Vac.
• Lowara SM20 digital control unit (see fig.2), which offers the following functions:

- Signaling LEDs: line presence (ref.1), thermal protection intervention (ref.2), level alarm for lack of water (ref.3), pump running (ref.4).
- Buttons (ref.5) and LED for automatic / manual operation (ref.6).
- Start, manual stop of pumps (one key for each pump) (ref.7).
- Automatic cascade control of the pumps via two pressure switches (one per pump).
- Jockey pump management by excluding cyclic inversion.
- Cyclic inversion function (can be excluded). It allows the automatic exchange of the pumps at each start/stop cycle.
- Automatic, manual or excluded operation selectors for each pump (inside board). To be used only in case of board failure to ensure pump operation.
- Prepared for protection against lack of water, alternatively between: float, minimum pressure switch, external contact or electrode probes with sensitivity adjustment.
- Adjustable delay timer for the intervention of the protection against lack of water (inside the board); adjustable between 0..30sec.
- Adjustable operation extension timer for each pump (inside the board); adjustable between 0..100sec.
- Prepared for the installation, inside the switchboard, of a relay card (optional) for relaunching signals for: pump 1, 2 running, manual mode, thermal alarm, water shortage alarm, line presence.

• Arrangement for connection of enable from external contact or pressure switch for maximum pressure protection.

• peso: 99.0 kg
• marca: LOWARA ELECTRIC PUMPS
• modello: HS_028616