icon Ebara Pressure Booster Group With 2 Horizontal Multistage Pumps With Cast Iron Body And 304 Stainless Steel Manifolds 2gp Compact A/15 T 2001050201m Without Vessel And With Silent Liquid Mounting Arrangement | CaldaieMurali

Ebara Pressure Booster Group With 2 Horizontal Multistage Pumps With Cast Iron Body And 304 Stainless Steel Manifolds 2gp Compact A/15 T 2001050201m Without Vessel And With Silent Liquid Mounting Arrangement

Description

Ebara booster set with 2 horizontal multistage pumps with cast iron body and 304 stainless steel manifolds 2GP COMPACT A/15 T 2001050201M WITHOUT TANK AND WITH SILENT MONTALIQUIDI ARRANGEMENT




General characteristics



  • Brand: Ebara

  • Model of the product supplied: 2GP COMPACT A/15 T

  • Supplied product code: 2001050201M


Data sheet



  • Maximum flow rate, m3/h: 9.6

  • Maximum pumping height: 86 m

  • Maximum working pressure: 8.6 bar

  • Maximum liquid temperature: 40°C

  • Suction diameter: G1½

  • Outlet diameter: G1½

  • Electrical connection: 400V, three-phase

  • Engine power: 1.1 + 1.1 kW

  • Motor type: 2 poles




Description


Protection and control panel with CE mark
• Very low voltage auxiliary circuit
• Starting and stopping of the engines are controlled by two
pressure switches
• It is possible to connect to floats, or minimum pressure switch, for
avoid operation under water shortage conditions
aspiration
• There is a device that swaps the starting order of the
pumps at every request
• Diet:
- single-phase 230V, 50Hz
- three-phase 400V, 50Hz
• Direct starting
• Power circuit protection fuses
• Auxiliary circuit protection fuses
• IP 55 degree of protection
• Main disconnect switch with door lock
• Automatic switches - 0 - man. for each pump
• Thermal protection reset
• Indicator LEDs:
- network presence
- engine running
- level alarm (if the optional float is installed)
- motor protection (only for the three-phase version)
• Alarm output setup




Groups with two horizontal multistage pumps.
Units with two horizontal double impeller pumps with stainless steel hydraulics.
TYPICAL APPLICATIONS
The typical applications of the 2GP series booster sets are:
• Water supply for distribution networks inherent in the sector
of the building service
• Water supply for industry in general
• Irrigation of gardens, parks and sports fields




GROUP EQUIPMENT
• Two pumps of the COMPACT series with 2-pole asynchronous motor
self-ventilated, efficiency class IE2 for three-phase motors starting from
0.6 kW
• Switchgear: the system is equipped as standard with a control panel
pump alternation control
• Operation of the pumps regulated by pressure switches
• Wetted parts are corrosion resistant
• Base in galvanized steel
• Manifolds in galvanized steel and on request AISI 304, AISI 316. I
collectors are sized according to the total flow rate of the group
pressurization
• Shut-off valve on the suction and discharge sides of each
pump
• Check valve on the suction side of each pump
• Pressure gauge, delivery side
• Prearranged for delivery side hydroaccumulator vessel connection
• Prepared for connecting external air feeders
• Prepared for connection of a device against lack of water




Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Ebara Pressure Booster Group With 2 Horizontal Multistage Pumps With Cast Iron Body And 304 Stainless Steel Manifolds 2gp Compact A/15 T 2001050201m Without Vessel And With Silent Liquid Mounting Arrangement

Product form

Ebara booster set with 2 horizontal multistage pumps with cast iron body and 304 stainless steel manifolds 2GP COMPACT A/15... Read more

€1.876,00 Incl. VAT

    Description

    Ebara booster set with 2 horizontal multistage pumps with cast iron body and 304 stainless steel manifolds 2GP COMPACT A/15 T 2001050201M WITHOUT TANK AND WITH SILENT MONTALIQUIDI ARRANGEMENT




    General characteristics



    • Brand: Ebara

    • Model of the product supplied: 2GP COMPACT A/15 T

    • Supplied product code: 2001050201M


    Data sheet



    • Maximum flow rate, m3/h: 9.6

    • Maximum pumping height: 86 m

    • Maximum working pressure: 8.6 bar

    • Maximum liquid temperature: 40°C

    • Suction diameter: G1½

    • Outlet diameter: G1½

    • Electrical connection: 400V, three-phase

    • Engine power: 1.1 + 1.1 kW

    • Motor type: 2 poles




    Description


    Protection and control panel with CE mark
    • Very low voltage auxiliary circuit
    • Starting and stopping of the engines are controlled by two
    pressure switches
    • It is possible to connect to floats, or minimum pressure switch, for
    avoid operation under water shortage conditions
    aspiration
    • There is a device that swaps the starting order of the
    pumps at every request
    • Diet:
    - single-phase 230V, 50Hz
    - three-phase 400V, 50Hz
    • Direct starting
    • Power circuit protection fuses
    • Auxiliary circuit protection fuses
    • IP 55 degree of protection
    • Main disconnect switch with door lock
    • Automatic switches - 0 - man. for each pump
    • Thermal protection reset
    • Indicator LEDs:
    - network presence
    - engine running
    - level alarm (if the optional float is installed)
    - motor protection (only for the three-phase version)
    • Alarm output setup




    Groups with two horizontal multistage pumps.
    Units with two horizontal double impeller pumps with stainless steel hydraulics.
    TYPICAL APPLICATIONS
    The typical applications of the 2GP series booster sets are:
    • Water supply for distribution networks inherent in the sector
    of the building service
    • Water supply for industry in general
    • Irrigation of gardens, parks and sports fields




    GROUP EQUIPMENT
    • Two pumps of the COMPACT series with 2-pole asynchronous motor
    self-ventilated, efficiency class IE2 for three-phase motors starting from
    0.6 kW
    • Switchgear: the system is equipped as standard with a control panel
    pump alternation control
    • Operation of the pumps regulated by pressure switches
    • Wetted parts are corrosion resistant
    • Base in galvanized steel
    • Manifolds in galvanized steel and on request AISI 304, AISI 316. I
    collectors are sized according to the total flow rate of the group
    pressurization
    • Shut-off valve on the suction and discharge sides of each
    pump
    • Check valve on the suction side of each pump
    • Pressure gauge, delivery side
    • Prearranged for delivery side hydroaccumulator vessel connection
    • Prepared for connecting external air feeders
    • Prepared for connection of a device against lack of water




    Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • marca: Hebara
    • modello: 2001050201M
    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Reviews of CaldaieMurali.it

    feedaty-widget

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account