icon Biasi Renew In 25s Condensing Built-in Boiler Complete With Methane Or LPG / LPG Fume Exhaust Kit | CaldaieMurali

Biasi Renew In 25s Condensing Built-in Boiler Complete With Methane Or LPG / LPG Fume Exhaust Kit

Description

Biasi rinNova boiler in 25S built-in condensing complete with methane fume exhaust kit


Energy label specifications according to the European ErP directive

  • * Class A heating energy efficiency
  • * Sanitary Energy Efficiency Class A
  • * Withdrawal profile: XL

Characteristics of heating/DHW operation:

  • * DHW useful thermal power: 24.4 kW
  • * Useful heating thermal power: 21.2 kW
  • * Nominal kW heat input(*): 25 kW
  • * Efficiency at 100% load: 106.2%
  • * Sanitary flow rate â??t =25°K l/min: 15.9 l/min
  • * IPX5D degree of protection
  • * Dimensions hxwxd: mm 1200 x 600 x 240
  • * CNG or LPG powered

Included in delivery

  • * External probe
  • * Siphon
  • * Analog pressure gauge
  • * Quick user instruction.

RinNova

RinNova IN E is the basic model of Biasi built-in condensing boilers. is available in the versions:

  • Combi, in powers 25 and 35 kW
  • Heating only, in the 16 and 25 kW powers in order to allow ample flexibility in the choice of systems and respond to the various residential needs.
  • RinNova IN E therefore combines the high efficiency and low polluting emissions typical of premixed boilers with the space-saving feature typical of built-in boilers.

Characteristics:

  • High performance
  • Primary condensing exchanger in stainless steel with plastic coating to offer maximum resistance to corrosion
  • Total premix burner, built in AISI 316L stainless steel (Class NOx 5)
  • Sanitary plate heat exchanger in stainless steel
  • High efficiency pump with low energy consumption
  • Maximum power adjustable according to system requirements
  • Degree of protection IPX5D
  • Integration with BIASI solar systems through

Unified box

The RinNova IN E range (16SV, 25SV and S) can be installed in the universal box of dimensions 1200 x 600 x 240 mm. The RinNova IN E 35S model can be installed in the same box and requires a specific embossed central door to house the oversized exchanger of this model. Therefore RinNova IN E 35S is installed in a box with overall dimensions of 1200 x 600 x 255 mm: the embossed door causes an increase in depth towards the outside of only 1.5 cm. The box has been redesigned to facilitate the installation of BIASI products:

Three front doors to allow easy access from the bottom door and front ejection.

Hydraulic template of the box shown on the sheet metal itself to speed up the operation of connecting the boiler to the system.

Simple assembly to reduce overall dimensions and wasted time on site!

Class 5 NOx (EN297)

The total premix burner optimizes the mixture of air and gas, maximizing yields and minimizing polluting emissions. Rinnova IN E belongs to the most restrictive class in terms of emissions with only 17 ppm of NOx produced, a quantity 5 times lower than the quantity of NOx produced by standard boilers.

Sanitary (EN 13203)

The domestic hot water comfort function ensures the best performance in terms of domestic hot water, reducing the waiting time for the availability of hot water and guaranteeing temperature stability.

Boiler controls

Rinnova IN E is equipped with a digital control panel to facilitate the selection of the desired temperature and the boiler parameters. The system pressure can be viewed on the display and on the pressure gauge, fitted as standard on the Rinnova IN E.


Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Biasi Renew In 25s Condensing Built-in Boiler Complete With Methane Or LPG / LPG Fume Exhaust Kit

Product form

Biasi rinNova boiler in 25S built-in condensing complete with methane fume exhaust kit Energy label specifications according to the European... Read more

€1.073,00 Incl. VAT

    Description

    Biasi rinNova boiler in 25S built-in condensing complete with methane fume exhaust kit


    Energy label specifications according to the European ErP directive

    • * Class A heating energy efficiency
    • * Sanitary Energy Efficiency Class A
    • * Withdrawal profile: XL

    Characteristics of heating/DHW operation:

    • * DHW useful thermal power: 24.4 kW
    • * Useful heating thermal power: 21.2 kW
    • * Nominal kW heat input(*): 25 kW
    • * Efficiency at 100% load: 106.2%
    • * Sanitary flow rate â??t =25°K l/min: 15.9 l/min
    • * IPX5D degree of protection
    • * Dimensions hxwxd: mm 1200 x 600 x 240
    • * CNG or LPG powered

    Included in delivery

    • * External probe
    • * Siphon
    • * Analog pressure gauge
    • * Quick user instruction.

    RinNova

    RinNova IN E is the basic model of Biasi built-in condensing boilers. is available in the versions:

    • Combi, in powers 25 and 35 kW
    • Heating only, in the 16 and 25 kW powers in order to allow ample flexibility in the choice of systems and respond to the various residential needs.
    • RinNova IN E therefore combines the high efficiency and low polluting emissions typical of premixed boilers with the space-saving feature typical of built-in boilers.

    Characteristics:

    • High performance
    • Primary condensing exchanger in stainless steel with plastic coating to offer maximum resistance to corrosion
    • Total premix burner, built in AISI 316L stainless steel (Class NOx 5)
    • Sanitary plate heat exchanger in stainless steel
    • High efficiency pump with low energy consumption
    • Maximum power adjustable according to system requirements
    • Degree of protection IPX5D
    • Integration with BIASI solar systems through

    Unified box

    The RinNova IN E range (16SV, 25SV and S) can be installed in the universal box of dimensions 1200 x 600 x 240 mm. The RinNova IN E 35S model can be installed in the same box and requires a specific embossed central door to house the oversized exchanger of this model. Therefore RinNova IN E 35S is installed in a box with overall dimensions of 1200 x 600 x 255 mm: the embossed door causes an increase in depth towards the outside of only 1.5 cm. The box has been redesigned to facilitate the installation of BIASI products:

    Three front doors to allow easy access from the bottom door and front ejection.

    Hydraulic template of the box shown on the sheet metal itself to speed up the operation of connecting the boiler to the system.

    Simple assembly to reduce overall dimensions and wasted time on site!

    Class 5 NOx (EN297)

    The total premix burner optimizes the mixture of air and gas, maximizing yields and minimizing polluting emissions. Rinnova IN E belongs to the most restrictive class in terms of emissions with only 17 ppm of NOx produced, a quantity 5 times lower than the quantity of NOx produced by standard boilers.

    Sanitary (EN 13203)

    The domestic hot water comfort function ensures the best performance in terms of domestic hot water, reducing the waiting time for the availability of hot water and guaranteeing temperature stability.

    Boiler controls

    Rinnova IN E is equipped with a digital control panel to facilitate the selection of the desired temperature and the boiler parameters. The system pressure can be viewed on the display and on the pressure gauge, fitted as standard on the Rinnova IN E.


    Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 50.0 kg
    • classe energetica produzione acs: A
    • classe energetica riscaldamento: A
    • gas: Methane/LPG
    • marca: Blame
    • metri quadri : 150
    • modello: rinnova_in_25
    • potenza in kw: 25
    • potenza nominale: 25
    • superficie riscaldabile mq: 150
    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Recensioni di CaldaieMurali.it

    feedaty-widget

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account