icon Gas Boiler Biasi Parva Recover E 28s Condensing Complete With LPG Fume Kit -New Erp | CaldaieMurali

Gas Boiler Biasi Parva Recover E 28s Condensing Complete With LPG Fume Kit -New Erp

Description

Overview

BIASI PARVA RECUPERA E 28S LPG CONDENSING BOILER - NEW ErP 2015, SEALED CHAMBER COMPLETE WITH FUME EXHAUST KIT: PARVA Recupera E the ErP condensing boiler with heat recovery unit

Technical specifications

Model:ÿPARVA Recover E 28S

Product number:ÿ10313.2027.3

Energy label specifications according to the European ErPÿ directive

Class B heating energy efficiency

Sanitary energy efficiency Class A

Withdrawal profiles: XL

Characteristics of heating/sanitary exercises:

Thermal input:ÿ29ÿkW

Rated useful power: 28.4 kW

Nominal load efficiency:ÿ98%

Efficiency minimum load:ÿ95.8%

Energy efficiency stars: (dir 92/42/CEE) ****

Min/max heating temperature: 38/85ÿøC

Capacity of the expansion vessel: 6 lt

Sanitary flow rate t =25øK l/min: 16.3 l/min

Degrees of protection for the electrical system:ÿIPX4D

Extremely compact dimensions hxwxd: mmÿ803x400x350ÿ; 49kg

LPG fuel supply

Features list

ErP wall-mounted boilers with recuperator

Redeveloping an old thermal systemÿ

Biasi has designed the ÿPARVA Recupera NOx EÿandÿPARVA Recupera Eÿboilers to replace traditional boilers in old systems.

The PARVA Recupera boilers by Biasi are equipped with a corrosion-resistant aluminum alloy fume recovery unit which makes these boilers particularly solid.

The recovery unit is made of aluminium, has a finned coil which determines a large exchange surface and is equipped with a device to ensure that the boiler discharges the condensate correctly. The recuperator is treated with a Teflon coating process to ensure maximum durability over time. Thanks to the large exchange surface, the recuperator allows the recovery of thermal energy which would otherwise be dispersed outside through the hot fumes produced by combustion.

PARVA Recover E

PARVA Recupera E is the condensing boiler designed for traditional systems and easily adaptable to new floor-based systems using MULTIZONE, a hot water distribution system for heating. PARVA It recovers the traditional boiler in the regulations but it has clearly higher efficiency than the traditional boilers at the same operating temperature. As a condensing boiler, PARVA Recupera allows you to take advantage of the tax deduction according to current legislation.

Characteristics:

High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06ÿ

Primary laminated copper heat exchanger with large double circulation exchange surfaceÿ

Aluminum heat recovery unit to exploit the heat of the fumes and transfer it to the waterÿ

Sanitary plate heat exchanger in INOXÿ steel

High efficiency pump with low energy consumptionÿ

retractable control panel, with ergonomic knobs and backlit displayÿ

Electronic board for:ÿ

- Re-ignition frequency adjustmentÿ

- Adjustable primary circuit thermal inertia disposalsÿ

- Selection of circulator modeÿ

- Circulator anti-seizeÿ

- Antifreeze safetyÿ

- Chimney sweep functionÿ

Integrated automatic by-passÿ

Immunity to radio interferenceÿ

Sanitary flowstat magneticÿ

Absolute heating pressure switchÿ

Degrees of protection IPX4Dÿ

Possibility of integrating PARVA Recupera E with Biasi solar systems using the optional solar kit.

Fiscal detraction

As a condensing boiler, PARVA Recupera E allows you to take advantage of the tax deduction according to current legislation.ÿÿ

Heat recoveryÿ

The heat recovery recovers the heat from the fumes before they are expelled and preheats the water directed to the primary exchanger. The recuperator made of aluminum has a finned coil which determines a large exchange surface and has a device to ensure that the boiler discharges the condensate correctly.ÿÿ

Thermoregulation

By connecting the external probe (optional) directly to the boiler, you can access the climatic adjustment function. The boiler is equipped with a complete set of curves which can be accessed by entering programming. By simply turning a knob you choose the curve, PARVA recovers and will automatically adapt its operation to the external climatic conditions.ÿÿ

High circulation primary heat exchangerÿ

It is the element that distinguishes the whole PARVA E Biasi range. It favors the flow of water into the heating system and, thanks to its reduced hydraulic resistance, adapts the boiler to the system, facilitating the transmission of heat to the radiators.ÿ

Save simplicity of use

Parva Recupera retains the simplicity of management, programming and regulation of the traditional boiler and imports the savings of the condensing boiler resulting from the recovery of heat from the fumes. The heat recovery unit preheats the system water with the heat released by the fumes, heat which in traditional boilers is dispersed into the environment. This recovery of energy from the fumes, at operating temperatures typical of radiator systems, leads Parva Recupera to have higher yields than traditional boilers.

Low complexity, high comfort

Parva Recupera boilers, despite the high technical content, are still very easy to use. Theÿcontrol panelÿhas two knobs dedicated to regulating the temperature of the domestic hot water and the heating water, the key to reset the boiler after the lockout status, the new display to view the boiler operating status and facilitate understanding by the User and the installer's settings .

Fault diagnostics allow immediate verification of correct operation. The manometer allows you to check the system pressure while the temperature is shown on the display. Everything is hidden under a door that defines the sober and linear aesthetics of Parva Recupera.

Included in delivery

Boiler support bracket and paper templateÿ

Condensate collection trapÿ

Quick instruction to the user.ÿ

All ready for Energy Labeling

What is it about

From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply.

These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction

For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to:

generators with a capacity of less than 400 kW

water heaters with a capacity of less than 400 kW,

kettles with a capacity of less than 2000 litres

As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase.

The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015.

It's about me too

YES, it affects everyone: professionals and end users

The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available.

The user will be able to easily compare the performance of the products.

From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems.

Supplier's liability

The company that supplies the product on the market is required to equip its system devices with the following documentation:

product energy label;ÿ

product data sheet;ÿ

system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ

technical data sheet of the system with the parts relating to the products and the system already completed.

Responsibilities of Resellersÿ

First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that:

all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ

all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ

every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class.

The new ErP regulations

ENERGY LABELLING:

Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances.

ECODESIGN (ErP):

The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products.

PRODUCT LABEL

There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible.

SYSTEM LABEL

In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way.

Warranty

All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Gas Boiler Biasi Parva Recover E 28s Condensing Complete With LPG Fume Kit -New Erp

Product form

Overview BIASI PARVA RECUPERA E 28S LPG CONDENSING BOILER - NEW ErP 2015, SEALED CHAMBER COMPLETE WITH FUME EXHAUST KIT:... Read more

€1.019,00 Incl. VAT

    Description

    Overview

    BIASI PARVA RECUPERA E 28S LPG CONDENSING BOILER - NEW ErP 2015, SEALED CHAMBER COMPLETE WITH FUME EXHAUST KIT: PARVA Recupera E the ErP condensing boiler with heat recovery unit

    Technical specifications

    Model:ÿPARVA Recover E 28S

    Product number:ÿ10313.2027.3

    Energy label specifications according to the European ErPÿ directive

    Class B heating energy efficiency

    Sanitary energy efficiency Class A

    Withdrawal profiles: XL

    Characteristics of heating/sanitary exercises:

    Thermal input:ÿ29ÿkW

    Rated useful power: 28.4 kW

    Nominal load efficiency:ÿ98%

    Efficiency minimum load:ÿ95.8%

    Energy efficiency stars: (dir 92/42/CEE) ****

    Min/max heating temperature: 38/85ÿøC

    Capacity of the expansion vessel: 6 lt

    Sanitary flow rate t =25øK l/min: 16.3 l/min

    Degrees of protection for the electrical system:ÿIPX4D

    Extremely compact dimensions hxwxd: mmÿ803x400x350ÿ; 49kg

    LPG fuel supply

    Features list

    ErP wall-mounted boilers with recuperator

    Redeveloping an old thermal systemÿ

    Biasi has designed the ÿPARVA Recupera NOx EÿandÿPARVA Recupera Eÿboilers to replace traditional boilers in old systems.

    The PARVA Recupera boilers by Biasi are equipped with a corrosion-resistant aluminum alloy fume recovery unit which makes these boilers particularly solid.

    The recovery unit is made of aluminium, has a finned coil which determines a large exchange surface and is equipped with a device to ensure that the boiler discharges the condensate correctly. The recuperator is treated with a Teflon coating process to ensure maximum durability over time. Thanks to the large exchange surface, the recuperator allows the recovery of thermal energy which would otherwise be dispersed outside through the hot fumes produced by combustion.

    PARVA Recover E

    PARVA Recupera E is the condensing boiler designed for traditional systems and easily adaptable to new floor-based systems using MULTIZONE, a hot water distribution system for heating. PARVA It recovers the traditional boiler in the regulations but it has clearly higher efficiency than the traditional boilers at the same operating temperature. As a condensing boiler, PARVA Recupera allows you to take advantage of the tax deduction according to current legislation.

    Characteristics:

    High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06ÿ

    Primary laminated copper heat exchanger with large double circulation exchange surfaceÿ

    Aluminum heat recovery unit to exploit the heat of the fumes and transfer it to the waterÿ

    Sanitary plate heat exchanger in INOXÿ steel

    High efficiency pump with low energy consumptionÿ

    retractable control panel, with ergonomic knobs and backlit displayÿ

    Electronic board for:ÿ

    - Re-ignition frequency adjustmentÿ

    - Adjustable primary circuit thermal inertia disposalsÿ

    - Selection of circulator modeÿ

    - Circulator anti-seizeÿ

    - Antifreeze safetyÿ

    - Chimney sweep functionÿ

    Integrated automatic by-passÿ

    Immunity to radio interferenceÿ

    Sanitary flowstat magneticÿ

    Absolute heating pressure switchÿ

    Degrees of protection IPX4Dÿ

    Possibility of integrating PARVA Recupera E with Biasi solar systems using the optional solar kit.

    Fiscal detraction

    As a condensing boiler, PARVA Recupera E allows you to take advantage of the tax deduction according to current legislation.ÿÿ

    Heat recoveryÿ

    The heat recovery recovers the heat from the fumes before they are expelled and preheats the water directed to the primary exchanger. The recuperator made of aluminum has a finned coil which determines a large exchange surface and has a device to ensure that the boiler discharges the condensate correctly.ÿÿ

    Thermoregulation

    By connecting the external probe (optional) directly to the boiler, you can access the climatic adjustment function. The boiler is equipped with a complete set of curves which can be accessed by entering programming. By simply turning a knob you choose the curve, PARVA recovers and will automatically adapt its operation to the external climatic conditions.ÿÿ

    High circulation primary heat exchangerÿ

    It is the element that distinguishes the whole PARVA E Biasi range. It favors the flow of water into the heating system and, thanks to its reduced hydraulic resistance, adapts the boiler to the system, facilitating the transmission of heat to the radiators.ÿ

    Save simplicity of use

    Parva Recupera retains the simplicity of management, programming and regulation of the traditional boiler and imports the savings of the condensing boiler resulting from the recovery of heat from the fumes. The heat recovery unit preheats the system water with the heat released by the fumes, heat which in traditional boilers is dispersed into the environment. This recovery of energy from the fumes, at operating temperatures typical of radiator systems, leads Parva Recupera to have higher yields than traditional boilers.

    Low complexity, high comfort

    Parva Recupera boilers, despite the high technical content, are still very easy to use. Theÿcontrol panelÿhas two knobs dedicated to regulating the temperature of the domestic hot water and the heating water, the key to reset the boiler after the lockout status, the new display to view the boiler operating status and facilitate understanding by the User and the installer's settings .

    Fault diagnostics allow immediate verification of correct operation. The manometer allows you to check the system pressure while the temperature is shown on the display. Everything is hidden under a door that defines the sober and linear aesthetics of Parva Recupera.

    Included in delivery

    Boiler support bracket and paper templateÿ

    Condensate collection trapÿ

    Quick instruction to the user.ÿ

    All ready for Energy Labeling

    What is it about

    From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply.

    These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction

    For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to:

    generators with a capacity of less than 400 kW

    water heaters with a capacity of less than 400 kW,

    kettles with a capacity of less than 2000 litres

    As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase.

    The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015.

    It's about me too

    YES, it affects everyone: professionals and end users

    The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available.

    The user will be able to easily compare the performance of the products.

    From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems.

    Supplier's liability

    The company that supplies the product on the market is required to equip its system devices with the following documentation:

    product energy label;ÿ

    product data sheet;ÿ

    system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ

    technical data sheet of the system with the parts relating to the products and the system already completed.

    Responsibilities of Resellersÿ

    First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that:

    all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ

    all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ

    every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class.

    The new ErP regulations

    ENERGY LABELLING:

    Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances.

    ECODESIGN (ErP):

    The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products.

    PRODUCT LABEL

    There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible.

    SYSTEM LABEL

    In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way.

    Warranty

    All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 50.0 kg
    • classe energetica produzione acs: A
    • classe energetica riscaldamento: B
    • gas: LPG
    • marca: Blame
    • metri quadri : 180
    • modello: PARVA RECUPERA E 28S GPL
    • potenza in kw: 28
    • potenza nominale: 28
    • superficie riscaldabile mq: 180
    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Reviews of CaldaieMurali.it

    feedaty-widget

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account