Overview
BIASI PARVA RECUPERA E 24S METHANE CONDENSING BOILER - NEW ErP 2015, SEALED CHAMBER COMPLETE WITH FUME EXHAUST KIT: PARVA Recupera E ErP condensing boiler with heat recovery unit.
Technical specifications
Model:ÿPARVA Recover E 24S
Product number:ÿ10312.2045.3
Energy label specifications according to the European ErPÿ directive
Class B heating energy efficiency
Sanitary energy efficiency Class A
Withdrawal profiles: XL
Characteristics of heating/sanitary exercises:
Thermal input:ÿ25ÿkW
Rated useful power: 24.3 kW
Nominal load efficiency:ÿ97.2%
Efficiency minimum load:ÿ95.1%
Energy efficiency stars: (dir 92/42/EEC) ****
Min/max heating temperature: 38/85ÿøC
Capacity of the expansion vessel: 6 lt
Sanitary flow rate t =25øK l/min: 13.9 l/min
Degrees of protection for the electrical system:ÿIPX4D
Extremely compact dimensions hxwxd: mmÿ803x400x350ÿ; 47.5kg
METHANE power supply
Features list
ErP wall-mounted boilers with recuperator
Redeveloping an old thermal systemÿ
Biasi has designed the ÿPARVA Recupera NOx EÿandÿPARVA Recupera Eÿboilers to replace traditional boilers in old systems.
The PARVA Recupera boilers by Biasi are equipped with a corrosion-resistant aluminum alloy fume recovery unit which makes these boilers particularly solid.
The recovery unit is made of aluminium, has a finned coil which determines a large exchange surface and is equipped with a device to ensure that the boiler discharges the condensate correctly. The recuperator is treated with a Teflon coating process to ensure maximum durability over time. Thanks to the large exchange surface, the recuperator allows the recovery of thermal energy which would otherwise be dispersed outside through the hot fumes produced by combustion.
PARVA Recover E
PARVA Recupera E is the condensing boiler designed for traditional systems and easily adaptable to new floor-based systems using MULTIZONE, a hot water distribution system for heating. PARVA It recovers the traditional boiler in the regulations but it has clearly higher efficiency than the traditional boilers at the same operating temperature. As a condensing boiler, PARVA Recupera allows you to take advantage of the tax deduction according to current legislation.
Characteristics:
High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06ÿ
Primary laminated copper heat exchanger with large double circulation exchange surfaceÿ
Aluminum heat recovery unit to exploit the heat of the fumes and transfer it to the waterÿ
Sanitary plate heat exchanger in INOXÿ steel
High efficiency pump with low energy consumptionÿ
retractable control panel, with ergonomic knobs and backlit displayÿ
Electronic board for:ÿ
- Re-ignition frequency adjustmentÿ
- Adjustable primary circuit thermal inertia disposalsÿ
- Selection of circulator modeÿ
- Circulator anti-seizeÿ
- Antifreeze safetyÿ
- Chimney sweep functionÿ
Integrated automatic by-passÿ
Immunity to radio interferenceÿ
Sanitary flowstat magneticÿ
Absolute heating pressure switchÿ
Degrees of protection IPX4Dÿ
Possibility of integrating PARVA Recupera E with Biasi solar systems using the optional solar kit.
Fiscal detraction
As a condensing boiler, PARVA Recupera E allows you to take advantage of the tax deduction according to current legislation.ÿÿ
Heat recoveryÿ
The heat recovery recovers the heat from the fumes before they are expelled and preheats the water directed to the primary exchanger. The recuperator made of aluminum has a finned coil which determines a large exchange surface and has a device to ensure that the boiler discharges the condensate correctly.ÿÿ
Thermoregulation
By connecting the external probe (optional) directly to the boiler, you can access the climatic adjustment function. The boiler is equipped with a complete set of curves which can be accessed by entering programming. By simply turning a knob you choose the curve, PARVA recovers and will automatically adapt its operation to the external climatic conditions.ÿÿ
High circulation primary heat exchangerÿ
It is the element that distinguishes the whole PARVA E Biasi range. It favors the flow of water into the heating system and, thanks to its reduced hydraulic resistance, adapts the boiler to the system, facilitating the transmission of heat to the radiators.ÿ
Savings simplicity of use
Parva Recupera retains the simplicity of management, programming and regulation of the traditional boiler and imports the savings of the condensing boiler resulting from the recovery of heat from the fumes. The heat recovery unit preheats the system water with the heat released by the fumes, heat which in traditional boilers is dispersed into the environment. This recovery of energy from the fumes, at operating temperatures typical of radiator systems, leads Parva Recupera to have higher yields than traditional boilers.
Low complexity, high comfort
Parva Recupera boilers, despite the high technical content, are still very simple to use. Theÿcontrol panelÿhas two knobs dedicated to regulating the temperature of the domestic hot water and the heating water, the key to reset the boiler after the lockout status, the new display to view the boiler operating status and make it easier for the user to understand and installer settings .
Fault diagnostics allow immediate verification of correct operation. The manometer allows you to check the system pressure while the temperature is shown on the display. Everything is hidden under a door that defines the sober and linear aesthetics of Parva Recupera.
Included in delivery
Boiler support bracket and paper templateÿ
Condensate collection trapÿ
Quick instruction to the user.ÿ
All ready for Energy Labeling
What is it about
From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply.
These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction
For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to:
generators with a capacity of less than 400 kW
water heaters with a capacity of less than 400 kW,
kettles with a capacity of less than 2000 litres
As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase.
The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015.
It's about me too
YES, it affects everyone: professionals and end users
The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available.
The user will be able to easily compare the performance of the products.
From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems.
Supplier's liability
The company that supplies the product on the market is required to equip its system devices with the following documentation:
product energy label;ÿ
product data sheet;ÿ
system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ
technical data sheet of the system with the parts relating to the products and the system already completed.
Responsibilities of Resellersÿ
First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that:
all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ
all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ
every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class.
The new ErP regulations
ENERGY LABELLING:
Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances.
ECODESIGN (ErP):
The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products.
PRODUCT LABEL
There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible.
SYSTEM LABEL
In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way.
Warranty
All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.