icon Air-Water Hydronic Heat Pump Beretta Hydro Unit M 012 Three-Phase R-32 20191958 | CaldaieMurali

Air-Water Hydronic Heat Pump Beretta Hydro Unit M 012 Three-Phase R-32 20191958

Description

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS
 
FREE FIRST START-UP

Technical features

  • Model : HYDRO UNIT M 012T
  • Product code : 20191958
  • Optional REC10MH control

Energy efficiency

  • Energy class in heating at 35° C: A+++
  • Energy class in heating at 55° C: A++
  • Heating COP with water set at 35°C: 4.95
  • Heating COP with water set at 45°C: 3.70
  • Heating COP with water set at 55°C: 3.05
  • EER cooling with water set at 7°C: 3.95
  • EER cooling with water set at 18°C: 2.75
Performance
 
Heating
  • Useful power in heating with water set at 35° C: 12.10 kW
  • Useful power in heating with water set at 45° C: 12.30 kW
  • Useful power in heating with water set at 55° C: 11.90 kW
Cooling down
  • Useful power in cooling with water set at 7 °C: 11.50 kW
  • Useful power in cooling with water set at 18 °C: 12.0 kW
Sound data
  • Sound power : 65 dB(A)
  • Sound pressure : 53 dB(A)

Electrical data

  • Power supply (V,Hz, Ø) : 380~415/50/3
  • Refrigerant gas : R32

Dimensions and weight

  • Dimensions (LxHxP): 1385x945x526 mm
  • Empty weight: 160.0 Kg

Beretta HYDRO UNIT M Inverter Monoblock Air-Water Hydronic Heat Pumps

These units are used for both heating and cooling applications as well as domestic hot water tanks. They can be combined with fan coil units, underfloor heating applications, low temperature high efficiency radiators, domestic hot water tanks and solar kits, all of which are field powered. A wired controller is supplied with the unit. The backup heater, available as an accessory, can increase the heating capacity in cold outside temperatures. The backup heater also serves as a backup in the event of a malfunction and as a freeze protection of the outdoor water pipes during the winter.

Efficiency and sustainability

The heat pumps of the HYDRO UNIT M series use R32 as the refrigerant gas, a gas with a lower Global Warming Potential than the traditional gases used. The design of a new sealed circuit for fluorinated gases, the use of R32, reduced load volumes, lower CO2 emissions and increased energy efficiency are the characteristics that differentiate HYDRO UNIT M and increase its sustainability environmental.

Quietness

The low noise level is guaranteed by the construction features used and can be further reduced thanks to the silent mode programming, available to the customer

Antifreeze function

The HYDRO UNIT M heat pump is foreseen for outdoor installation and equipped with the ANTIFREEZE function for the protection of the entire hydraulic circuit. This customer-programmable function activates automatically whenever the water temperature in the system drops below a pre-set value, ensuring the protection of the entire system

Better performance

The ten models available offer powers from 4 kW to 16 kW , with fast response to requests and reduced energy consumption which guarantee energy class A+++ up to 35°C and A++ up to 55°C

HP KEYMARK Certified

The design meets the requirements of the voluntary European HP KEYMARK certification

Easy and flexible

Installing HYDRO UNIT M is easy thanks to the hydronic kit that comes with the monobloc and which contains all the essential components. HYDRO UNIT M is flexible thanks to its ability to respond quickly to the real needs of the environments to be served


Functional elements Beretta Hydro Unit M

Hydro Unit M

Inverter Control Board Maximizes power under critical load conditions and provides stability and efficiency at part loads

AISI 316 steel plate heat exchanger : protected with closed cell anti-condensation insulation, it offers high heat exchange efficiency

Control board Operating parameters constantly analyzes the ambient temperature and the water temperature to activate the different components and meet the demand

Hydronic module Including low consumption circulator, expansion vessel, automatic vent valve and safety valve

Electronic expansion valve Optimizes the flow of the refrigerant fluid in every situation

Twin rotary compressor Inverter System design including DC twin rotary compressor, fan motor and pump ensures precise motor speed control for the right power needed to perfectly match actual load and save energy

Fan Special design of the blade and its edge that allows optimizing the flow surface, improving efficiency and reducing fan noise

Heat exchange coil With extended surface and aluminum fins


Install more Hydro Unit M

HYDRO UNIT M offers the possibility of connecting up to six units to each other for the heating, cooling and domestic hot water needs of small condominiums and light commercial contexts. Each of the units responds individually to the demands of the environment in which it is installed

Install Hydro Unit M

Easily manage the plant

Advanced remote control

This module, present in every HYDRO UNIT M installation, has a multilingual display and allows you to:

  • Manage up to six units connected in cascade
  • Activate the programmed functions such as the Antifreeze function and the Vacation function, for the serenity of the family

REC10MH management module

Designed for full-electric and hybrid applications, this module is installed inside the home and allows the user to easily manage the entire system. If the system is equipped with a Hybrid distribution system, REC10MH allows you to manage the multi-zone system to optimize the operation of the system. The module is equipped with a color display and a multilingual menu

USB

Each HYDRO UNIT M is equipped with a USB port to connect the USB flash memory to update the unit firmware


Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Air-Water Hydronic Heat Pump Beretta Hydro Unit M 012 Three-Phase R-32 20191958

Product form

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS  ... Read more

€4.100,00 Incl. VAT

    Description

    ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS
     
    FREE FIRST START-UP

    Technical features

    • Model : HYDRO UNIT M 012T
    • Product code : 20191958
    • Optional REC10MH control

    Energy efficiency

    • Energy class in heating at 35° C: A+++
    • Energy class in heating at 55° C: A++
    • Heating COP with water set at 35°C: 4.95
    • Heating COP with water set at 45°C: 3.70
    • Heating COP with water set at 55°C: 3.05
    • EER cooling with water set at 7°C: 3.95
    • EER cooling with water set at 18°C: 2.75
    Performance
     
    Heating
    • Useful power in heating with water set at 35° C: 12.10 kW
    • Useful power in heating with water set at 45° C: 12.30 kW
    • Useful power in heating with water set at 55° C: 11.90 kW
    Cooling down
    • Useful power in cooling with water set at 7 °C: 11.50 kW
    • Useful power in cooling with water set at 18 °C: 12.0 kW
    Sound data
    • Sound power : 65 dB(A)
    • Sound pressure : 53 dB(A)

    Electrical data

    • Power supply (V,Hz, Ø) : 380~415/50/3
    • Refrigerant gas : R32

    Dimensions and weight

    • Dimensions (LxHxP): 1385x945x526 mm
    • Empty weight: 160.0 Kg

    Beretta HYDRO UNIT M Inverter Monoblock Air-Water Hydronic Heat Pumps

    These units are used for both heating and cooling applications as well as domestic hot water tanks. They can be combined with fan coil units, underfloor heating applications, low temperature high efficiency radiators, domestic hot water tanks and solar kits, all of which are field powered. A wired controller is supplied with the unit. The backup heater, available as an accessory, can increase the heating capacity in cold outside temperatures. The backup heater also serves as a backup in the event of a malfunction and as a freeze protection of the outdoor water pipes during the winter.

    Efficiency and sustainability

    The heat pumps of the HYDRO UNIT M series use R32 as the refrigerant gas, a gas with a lower Global Warming Potential than the traditional gases used. The design of a new sealed circuit for fluorinated gases, the use of R32, reduced load volumes, lower CO2 emissions and increased energy efficiency are the characteristics that differentiate HYDRO UNIT M and increase its sustainability environmental.

    Quietness

    The low noise level is guaranteed by the construction features used and can be further reduced thanks to the silent mode programming, available to the customer

    Antifreeze function

    The HYDRO UNIT M heat pump is foreseen for outdoor installation and equipped with the ANTIFREEZE function for the protection of the entire hydraulic circuit. This customer-programmable function activates automatically whenever the water temperature in the system drops below a pre-set value, ensuring the protection of the entire system

    Better performance

    The ten models available offer powers from 4 kW to 16 kW , with fast response to requests and reduced energy consumption which guarantee energy class A+++ up to 35°C and A++ up to 55°C

    HP KEYMARK Certified

    The design meets the requirements of the voluntary European HP KEYMARK certification

    Easy and flexible

    Installing HYDRO UNIT M is easy thanks to the hydronic kit that comes with the monobloc and which contains all the essential components. HYDRO UNIT M is flexible thanks to its ability to respond quickly to the real needs of the environments to be served


    Functional elements Beretta Hydro Unit M

    Hydro Unit M

    Inverter Control Board Maximizes power under critical load conditions and provides stability and efficiency at part loads

    AISI 316 steel plate heat exchanger : protected with closed cell anti-condensation insulation, it offers high heat exchange efficiency

    Control board Operating parameters constantly analyzes the ambient temperature and the water temperature to activate the different components and meet the demand

    Hydronic module Including low consumption circulator, expansion vessel, automatic vent valve and safety valve

    Electronic expansion valve Optimizes the flow of the refrigerant fluid in every situation

    Twin rotary compressor Inverter System design including DC twin rotary compressor, fan motor and pump ensures precise motor speed control for the right power needed to perfectly match actual load and save energy

    Fan Special design of the blade and its edge that allows optimizing the flow surface, improving efficiency and reducing fan noise

    Heat exchange coil With extended surface and aluminum fins


    Install more Hydro Unit M

    HYDRO UNIT M offers the possibility of connecting up to six units to each other for the heating, cooling and domestic hot water needs of small condominiums and light commercial contexts. Each of the units responds individually to the demands of the environment in which it is installed

    Install Hydro Unit M

    Easily manage the plant

    Advanced remote control

    This module, present in every HYDRO UNIT M installation, has a multilingual display and allows you to:

    • Manage up to six units connected in cascade
    • Activate the programmed functions such as the Antifreeze function and the Vacation function, for the serenity of the family

    REC10MH management module

    Designed for full-electric and hybrid applications, this module is installed inside the home and allows the user to easily manage the entire system. If the system is equipped with a Hybrid distribution system, REC10MH allows you to manage the multi-zone system to optimize the operation of the system. The module is equipped with a color display and a multilingual menu

    USB

    Each HYDRO UNIT M is equipped with a USB port to connect the USB flash memory to update the unit firmware


    Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 199.0 kg
    • alimentazione: Three-phase
    • gas: R-32
    • marca: BERETTA
    • modello: HYDRO UNIT M 012 T_1
    • potenza in kw: 12
    • tipologia : Hydronics
    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Recensioni di CaldaieMurali.it

    feedaty-widget

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account