- Indoor/Outdoor installation
- Nominal heat input 28 kW
- Nominal thermal power 26.8 kW
- Nominal thermal power at partial load (30%) 8.5 kW
- Useful efficiency at nominal power 86.3% n4
- New version NOx < 56 mg/kWh
- IPX5D electrical protection degree
Dimensions
- Dimensions h/w/d (mm): 780/452/336
HELLO AT new LOW NOx model
Hi AT, ideal for replacement in systems with radiators
Ciao AT is the innovative condensing boiler specifically designed by Beretta for traditional high temperature systems (radiators and radiators). The boiler is equipped with a heat recovery unit on the fumes and combustion in a sealed chamber; this allows to obtain very high performance in terms of efficiency and therefore a significant energy saving.
- New burner with low NOx emissions
- Specific for systems with radiators and radiators (at high temperature)
- Condensing post exchanger in aluminum alloy
- Possibility of outdoor installation with antifreeze heater kit (optional)
- IPX5D electrical protection degree
- Environmental Self-Regulation System (SARA)
- Low consumption circulator 6 m (EEI≤0.20)
- Hydraulic connections cover (optional)
- Condensate collection neutralizer drawer kit (optional)
- Template, hydraulic fittings, gas and sanitary taps (optional)
High performance and low consumption
In the Ciao AT boiler, the water in the primary circuit passes through an additional exchanger, which allows you to recover energy that would otherwise be wasted. This process makes it possible to recover latent heat and therefore to further increase the performance of the boiler. The energy saving offered by a boiler is greater the higher its efficiency: Ciao AT therefore allows you to reduce gas consumption compared to a boiler without an additional exchanger.
The management
The electronic panel is the interface for managing the boiler. Simple and intuitive, it allows you to adjust the boiler parameters and activate the numerous functions. The liquid crystal display provides information on the status of the device and the diagnostic codes. By turning the knobs, the heating water and domestic hot water temperature can be set easily and intuitively. The panel integrates the Sistema Clima Amico function.
Compatible with BeSMART
The BeSMART WiFi Comfort Control Panel, optional compatible with Ciao AT, is the remote boiler management device with modulating chronothermostat functions. With the WiFi Box accessory, included in the BeSMART WiFi Comfort Control, it is also possible to manage comfort remotely using Smartphones and Tablets. The BeSMART WiFi control is very simple to install and intuitive to use and allows you to adjust the parameters and activate the many functions on the boiler. A large liquid crystal display shows all important information. Using the buttons on the control, the temperature of the heating water and domestic hot water is set easily and intuitively and the heating time programming is carried out.
Outdoor installation
Ciao AT is designed to also be installed outdoors in partially protected places thanks to the dedicated accessories (bottom cover kit and top cover kit) and board antifreeze protection down to 0 °C. In colder temperatures it is possible to extend the protection down to -10 °C using the special antifreeze heater kit with which the lower cover is required.
Product Guarantee
All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.