Offer Baxi Auriga 5m R-32 Single-Phase Air-Water Monobloc Inverter A7794318 Complete With Control - New

• Thermal power (air +7°C (bs) / +6°C (bu) and delivery temperature of +35°C - EN 14511): 4.65 kW
• COP: 5.00
• Cooling capacity (air +35°C (bs) and delivery temperature +7°C - EN 14511): 4.60 kW
• EER: 2.98
• SEER: 4.71
• R32 refrigerant charge: 2.00 kg
• Number/type of compressors: 1/rotary DC inverter
• Number of fans: 1
• Nominal water flow (winter operation): 0.80 m³/h
• Circulation pump useful head: 55 kPa
• Inlet/outlet hydraulic connections: 1” male / 1” male
• Power supply voltage: 230V 1P+N+T
• Power supply frequency: 50Hz
• Overall dimensions H x W x D: 945mm x 1210mm x 402mm
• Weight: 92kg
• Sound power: 61dB(A)
• Sound pressure at 1 meter in free field on a reflective surface: 48.8 dB(A)

BAXI AURIGA Inverter Monobloc Air-Water Heat Pumps

Baxi introduces Auriga , the range of inverter packaged air-to-water heat pumps with single-phase and three-phase power supply. The range is characterized by the ease and simplicity of installation . Furthermore, the increased head of the on-board circulator allows the unit to be installed in large-scale systems, to cover greater distances from the heating plant or to install the unit directly to serve the fan coils. The range is wide and consists of 8 models from 4 to 16 kW, single-phase and three-phase versions

Wide range of powers from 4 to 16 kW to satisfy all system requirements: heating, cooling and DHW production

Easy to install in various living contexts, the increased head pump allows you to cope with greater pressure drops such as large systems or directly serving the fan coils

STANDARD complete hydraulic equipment circulation pump, flow switch, expansion tank, safety valve, pressure gauge and “Y” filter

Remote control panel control of system functions, programming and parameter verification. Furthermore, the connection via Modbus allows integration with BMS systems

ErP Energy Labeling the labeling regulation (EU Regulation 2017/1369) requires the labeling of products according to a decreasing energy scale that goes from A+++ to D (in heating) and from A+ to F (in sanitary). The 5M/7M/9M models achieve an efficiency of A+++ in low temperature heating

Components

> Twin rotary DC inverter compressor : complete with internal thermal protection and crankcase heater, it is mounted on vibration dampers and wrapped around an insulating cap to reduce the transmission of noise and vibrations due to operation

> Water-refrigerant exchanger : with brazed plates in AISI 316 steel with external anti-condensation insulation in expanded polypropylene and antifreeze resistance to prevent the formation of ice in the exchanger

> Air-refrigerant exchanger : finned aluminum coil with hydrophilic treatment to facilitate the outflow of the condensate, mechanically expanded copper pipes with internal shaping to increase the heat exchange Furthermore, the optimized circuitry reduces the formation of ice in the coil during heat pump operation

> Fan : axial fan directly coupled to the high efficiency brushless DC variable speed motor. The fan is installed on aerodynamic nozzles and safety grilles

> Refrigerant circuit : made of pickled copper, it includes the electronic expansion valve, drier filters, high and low pressure switches, pressure transducer, cycle inversion valves, liquid receiver and separator, refrigerant injection valve on the suction side

> Hydraulic circuit : in addition to the brazed plate heat exchanger, the unit includes the high head circulator, the expansion vessel, the safety valve, the flow switch, the pressure gauge and the air vent valve and the metal mesh Y-filter (assembly by the installer)

> Electrical panel : includes fuse protection of the main internal components; the terminal block is divided into a power section for supplying the unit and a control terminal block for connecting auxiliary inputs and outputs and connection to the control panel

Main Features BAXI AURIGA

• Maximum energy efficiency

• Monobloc system for the production of heating, cooling and DHW

• Wide operating range, with external air down to -25°C in heating, up to 46°C in cooling

• DHW system management: production up to 60°C, storage tank temperature management, DHW recirculation pump and solar thermal integration

• Suitable for integration with radiant terminals, fan coils and mixed systems

• Integrated management with various plant systems: boiler integration, solar integration, management of diverter valves and secondary circuit pump

• Single-phase and three-phase power supply

• Compressor with DC inverter technology with high modulation range

• Modbus network connection

• Low GWP R32 refrigerant

Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.