icon Ariston Egis Premium Evo Ext 30 Eu Condensing Boiler Complete With Methane Fume Kit - New Erp | CaldaieMurali

Ariston Egis Premium Evo Ext 30 Eu Condensing Boiler Complete With Methane Fume Kit - New Erp

Description

NB: PRODUCT ARRIVES IN MID-FEBRUARY

ARISTON EGIS PREMIUM EVO EXT 30 EU CONDENSING COMPLETE WITH METHANE FUME KIT - ErP


Technical features

Product code: 3300764


Energy label specifications according to the European ErP directive

  • Class A heating energy efficiency
  • Sanitary energy efficiency profile XL Class A
  • Characteristics of heating/DHW operation:
  • For heating and domestic hot water production
  • Forced draft sealed chamber
  • Nominal heat input in heating max/min kW 29/6.0
  • Max/min heating thermal power (80°C-60°C) kW 28.4/5.8
  • Efficiency at nominal heat input (60/80°C) % 97.8
  • Efficiency at nominal heat input (30/50°C) % 104.0
  • Efficiency at 30% at 30°C % 108.0
  • Performance stars (dir. 92/42/EEC) ★★★★
  • Min/max heating temperature (high temperature range) °C 35/ 82
  • Min/max heating temperature (low temperature range)°C 25/45
  • Specific flow rate in DHW (10 min. with ∆T=30°C) litres/min 13.2
  • Quantity of hot water ∆T=25°C litres/min 16.3
  • Quantity of hot water ∆T=35°C litres/min 11.6
  • Comfort performance stars (EN13203) ★★★
  • Supply voltage/frequency V/Hz 230 / 50
  • Total absorbed electric power W 82
  • Degrees of protection of the electrical system IP X5D
  • Dimensions (H x W x D) mm 770/505/240
  • Extremely small dimensions to adapt to any space problem.
  • METHANE power supply

Standard:

  • Sensys system manager with integrated time programming
  • General characteristics

Ariston condensing boilers

1 condensing boiler = -737kg CO2/year 1 condensing boiler = 60 more trees

Together with the heat, a traditional boiler also produces water in the vapor state, usually evacuated through the exhaust fumes. Normal boilers, since they do not treat these fumes before releasing them into the environment, therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process which, inside the boiler, transforms the water again from the vapor state to the liquid one. CLAS PREMIUM EVO, exploits the phenomenon of condensation in its favor by reusing the energy of the exhaust fumes and increases the useful calorific value, thus reaching the thermal efficiency of over 107%. Furthermore, during this process, most of the harmful combustion products for the environment and health, they are eliminated together with the condensed water.


Consistent convenience

The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings in the bill, less than three years are enough to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real gain. Imagine what a reduced bill of up to 35% every year, for many years, means for your economies...

Zero waste, only benefits

Today Ariston combines energy savings with tax savings, offering a great opportunity to those who have chosen to replace the old boiler with a condensing one. In fact, the Finance law provides for specific tax incentives in favor of taxpayers.

EVO: energy saving becomes reality, for everyone's well-being

Among the measures aimed at reducing the energy consumption of buildings (European Directive 2010/30/EC), the Italian legislation has introduced "The obligation of the Energy Certificate of the building" in the purchase and sale of new and existing buildings. They have also been extended until throughout June 2013, bringing them to a value of 50%, the "tax credit deductions relating to building renovations and energy efficiency interventions". For the purpose of achieving the national objectives envisaged on the coverage of consumption through renewable energy sources (European Directive 2009/28/EC) it also requires and promotes "the use of heating systems operating on renewable energy". With the EVO range, Ariston satisfies all the indications envisaged for having "low energy consumption buildings", guaranteeing optimal integration with systems using renewable energy.

Egis Premium Evo EXT

EGIS Premium Evo EXT is the wall-mounted condensing boiler designed for outdoor installation. Thanks to its small size and low weight, installation is extremely simple. This without giving up the safety that distinguishes Ariston, i.e. exceptional resistance to cold (up to -15°C) and electrical protection from water and dust that reaches the highest levels (IPX5D classification). Simplicity and with reduced consumption thanks to the 1:4 modulation ratio and the high-efficiency circulator with continuous modulation. Operation only with methane gas.


Characteristics:

  • Wall mounted condensing boiler for outdoors with auto function
  • Sensys system manager with integrated time programming
  • Continuous modulation high efficiency circulator
  • Modulation ratio 1:4
  • Electro-galvanized casing for outdoors
  • Prepared for integration in system configuration through the new Bus Bridgenet® communication protocol
  • Arrangement for multi-zone and multi-temperature thermoregulation
  • Arrangement for solar system management
  • Car function and comfort
  • External probe integrated in the boiler
  • Anti-freeze, anti-limescale and anti-blocking circulator protection
  • Aluminum isothermal primary exchanger
  • Cold water inlet and heating return filters
  • 60mm split exhaust
  • Operation only with methane gas


Convenience function:

The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use:

COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds)
COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings)

car function:

It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons

Acoustic comfort

Acoustic comfort is further guaranteed by the introduction of the new silencer. For the Genus Premium Evo EXT thanks also to the high modulation ratio 1:10, the continuously modulating pump and the presence of side sound-absorbing panels.

High efficiency circulator with continuous modulation:

It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption.

  • Optimization of thermal efficiency.
  • Optimization of comfort with constant temperature.
  • Maximum silence.
  • High efficiency

The condensing technology makes it possible to achieve high energy efficiency thanks to the increase in the calorific value generated by the reuse of the energy of the exhaust fumes, allowing for a higher thermal efficiency. The future of the planet and your comfort are the main objectives of Ariston condensing technology


Product Guarantee
All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Ariston Egis Premium Evo Ext 30 Eu Condensing Boiler Complete With Methane Fume Kit - New Erp

Product form

NB: PRODUCT ARRIVES IN MID-FEBRUARY ARISTON EGIS PREMIUM EVO EXT 30 EU CONDENSING COMPLETE WITH METHANE FUME KIT - ErP... Read more

€1.098,00 Incl. VAT

    Description

    NB: PRODUCT ARRIVES IN MID-FEBRUARY

    ARISTON EGIS PREMIUM EVO EXT 30 EU CONDENSING COMPLETE WITH METHANE FUME KIT - ErP


    Technical features

    Product code: 3300764


    Energy label specifications according to the European ErP directive

    • Class A heating energy efficiency
    • Sanitary energy efficiency profile XL Class A
    • Characteristics of heating/DHW operation:
    • For heating and domestic hot water production
    • Forced draft sealed chamber
    • Nominal heat input in heating max/min kW 29/6.0
    • Max/min heating thermal power (80°C-60°C) kW 28.4/5.8
    • Efficiency at nominal heat input (60/80°C) % 97.8
    • Efficiency at nominal heat input (30/50°C) % 104.0
    • Efficiency at 30% at 30°C % 108.0
    • Performance stars (dir. 92/42/EEC) ★★★★
    • Min/max heating temperature (high temperature range) °C 35/ 82
    • Min/max heating temperature (low temperature range)°C 25/45
    • Specific flow rate in DHW (10 min. with ∆T=30°C) litres/min 13.2
    • Quantity of hot water ∆T=25°C litres/min 16.3
    • Quantity of hot water ∆T=35°C litres/min 11.6
    • Comfort performance stars (EN13203) ★★★
    • Supply voltage/frequency V/Hz 230 / 50
    • Total absorbed electric power W 82
    • Degrees of protection of the electrical system IP X5D
    • Dimensions (H x W x D) mm 770/505/240
    • Extremely small dimensions to adapt to any space problem.
    • METHANE power supply

    Standard:

    • Sensys system manager with integrated time programming
    • General characteristics

    Ariston condensing boilers

    1 condensing boiler = -737kg CO2/year 1 condensing boiler = 60 more trees

    Together with the heat, a traditional boiler also produces water in the vapor state, usually evacuated through the exhaust fumes. Normal boilers, since they do not treat these fumes before releasing them into the environment, therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process which, inside the boiler, transforms the water again from the vapor state to the liquid one. CLAS PREMIUM EVO, exploits the phenomenon of condensation in its favor by reusing the energy of the exhaust fumes and increases the useful calorific value, thus reaching the thermal efficiency of over 107%. Furthermore, during this process, most of the harmful combustion products for the environment and health, they are eliminated together with the condensed water.


    Consistent convenience

    The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings in the bill, less than three years are enough to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real gain. Imagine what a reduced bill of up to 35% every year, for many years, means for your economies...

    Zero waste, only benefits

    Today Ariston combines energy savings with tax savings, offering a great opportunity to those who have chosen to replace the old boiler with a condensing one. In fact, the Finance law provides for specific tax incentives in favor of taxpayers.

    EVO: energy saving becomes reality, for everyone's well-being

    Among the measures aimed at reducing the energy consumption of buildings (European Directive 2010/30/EC), the Italian legislation has introduced "The obligation of the Energy Certificate of the building" in the purchase and sale of new and existing buildings. They have also been extended until throughout June 2013, bringing them to a value of 50%, the "tax credit deductions relating to building renovations and energy efficiency interventions". For the purpose of achieving the national objectives envisaged on the coverage of consumption through renewable energy sources (European Directive 2009/28/EC) it also requires and promotes "the use of heating systems operating on renewable energy". With the EVO range, Ariston satisfies all the indications envisaged for having "low energy consumption buildings", guaranteeing optimal integration with systems using renewable energy.

    Egis Premium Evo EXT

    EGIS Premium Evo EXT is the wall-mounted condensing boiler designed for outdoor installation. Thanks to its small size and low weight, installation is extremely simple. This without giving up the safety that distinguishes Ariston, i.e. exceptional resistance to cold (up to -15°C) and electrical protection from water and dust that reaches the highest levels (IPX5D classification). Simplicity and with reduced consumption thanks to the 1:4 modulation ratio and the high-efficiency circulator with continuous modulation. Operation only with methane gas.


    Characteristics:

    • Wall mounted condensing boiler for outdoors with auto function
    • Sensys system manager with integrated time programming
    • Continuous modulation high efficiency circulator
    • Modulation ratio 1:4
    • Electro-galvanized casing for outdoors
    • Prepared for integration in system configuration through the new Bus Bridgenet® communication protocol
    • Arrangement for multi-zone and multi-temperature thermoregulation
    • Arrangement for solar system management
    • Car function and comfort
    • External probe integrated in the boiler
    • Anti-freeze, anti-limescale and anti-blocking circulator protection
    • Aluminum isothermal primary exchanger
    • Cold water inlet and heating return filters
    • 60mm split exhaust
    • Operation only with methane gas


    Convenience function:

    The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use:

    COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds)
    COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings)

    car function:

    It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons

    Acoustic comfort

    Acoustic comfort is further guaranteed by the introduction of the new silencer. For the Genus Premium Evo EXT thanks also to the high modulation ratio 1:10, the continuously modulating pump and the presence of side sound-absorbing panels.

    High efficiency circulator with continuous modulation:

    It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption.

    • Optimization of thermal efficiency.
    • Optimization of comfort with constant temperature.
    • Maximum silence.
    • High efficiency

    The condensing technology makes it possible to achieve high energy efficiency thanks to the increase in the calorific value generated by the reuse of the energy of the exhaust fumes, allowing for a higher thermal efficiency. The future of the planet and your comfort are the main objectives of Ariston condensing technology


    Product Guarantee
    All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 40.0 kg
    • classe energetica produzione acs: A
    • classe energetica riscaldamento: A
    • gas: Methane
    • marca: Ariston
    • metri quadri : 220
    • modello: CALD_430
    • potenza in kw: 30
    • potenza nominale: 30
    • superficie riscaldabile mq: 220
    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Reviews of CaldaieMurali.it

    feedaty-widget

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account