icon Ariston CLAS B ONE Wi-Fi 35 kW Methane/LPG Condensing Boiler with 40 lt Accumulation Complete with Flue Gas Exhaust Kit 3302128 | CaldaieMurali

Ariston CLAS B ONE Wi-Fi 35 kW Methane/LPG Condensing Boiler with 40 lt Accumulation Complete with Flue Gas Exhaust Kit 3302128

Description

ATTENTION THE BOILER IS BORN WITH METHANE. THEREFORE, THE TRANSFORMATION KIT WILL BE SUPPLIED AS STANDARD. FOR INFORMATION, CONTACT THE AUTHORIZED ASSISTANCE CENTER IN YOUR AREA IN ADVANCE

Ariston Condensing Boiler CLAS B ONE 35 Methane or LPG 40 lt storage complete with flue gas exhaust kit code 3301212


  • Product code: 3301212

Energy label specifications according to European ErP directive

  • Heating energy efficiency Class A
  • Energy efficiency sanitary XXL profile Class A

Heating/sanitary operation features:

  • Nominal heat input max/min (heating) PCI: 31-5.0 kW
  • Nominal heat output max/min (sanitary) PCI: 34.5-5.0 kW
  • Max/min useful thermal power (heating):30.2-4.7 kW
  • Efficiency at nominal heat output (60/80°C) PCI: 97.3%
  • Efficiency at nominal heat output (30/50°C) PCI: 106.5%
  • Efficiency at 30% (30° C) PCI: 109.3%
  • Max/min heating temperature (high temperature): 82-35°C
  • Max/min heating temperature (low temperature): 45-20°C
  • Max/min sanitary temperature: 65-40°C
  • Quantity of hot water (deltaT 25°C): 26.5 l/min
  • Quantity of hot water (deltaT 35°C): 18.9 l/min
  • Specific flow rate (first 10' with deltaT 30°C): 22.1 l/min
  • Minimum operating temperature > 0°C
  • Modulation ratio 1:7
  • Power supply voltage/frequency V/Hz 230-50
  • Total absorbed electrical power: 84W
  • Electrical system protection degree IP X5D
  • Dimensions 24 kW mm (HxWxD) 900 x 600 x 474
  • Power supply: Methane or LPG
  • LPG conversion kit as standard

Functionality:

  • XtraTech™ stainless steel primary exchanger
  • AUTO, Comfort functions
  • Internal Installation

CLASS B ONE

  • Ariston exclusive XtraTech™ stainless steel exchanger, with high prevalence
  • Exchanger passage sections +142% compared to the previous version
  • LCD display
  • 2 x 20 litre stainless steel stratification boilers
  • Class A+ in heating achievable with thermoregulation
  • Modulation ratio 1:7
  • BusBridgeNet® communication protocol
  • Optimized boiler heating logic
  • AUTO and Comfort function
  • Prepared for sanitary recirculation
  • Flue pipe 80, 60, 50 mm

Comfort Function Speeds up the delivery of hot water in two modes: Comfort Plus Mode (always hot water in just 5") and Comfort Mode (hot water for 30' after the last dispensing).

Auto Function Maximum comfort, efficiency and energy savings based on automatic analysis of environmental conditions, connected external devices and required performance.

System Management New communication protocol designed to ensure complete system management.

Super silence Silence in all operating modes.

High efficiency Product characterised by high energy performance, reduced consumption and polluting emissions.

Made in Italy Produced entirely in Italy.

Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Ariston CLAS B ONE Wi-Fi 35 kW Methane/LPG Condensing Boiler with 40 lt Accumulation Complete with Flue Gas Exhaust Kit 3302128

Product form

ATTENTION THE BOILER IS BORN WITH METHANE. THEREFORE, THE TRANSFORMATION KIT WILL BE SUPPLIED AS STANDARD. FOR INFORMATION, CONTACT THE... Read more

€1.728,00 Incl. VAT

    Description

    ATTENTION THE BOILER IS BORN WITH METHANE. THEREFORE, THE TRANSFORMATION KIT WILL BE SUPPLIED AS STANDARD. FOR INFORMATION, CONTACT THE AUTHORIZED ASSISTANCE CENTER IN YOUR AREA IN ADVANCE

    Ariston Condensing Boiler CLAS B ONE 35 Methane or LPG 40 lt storage complete with flue gas exhaust kit code 3301212


    • Product code: 3301212

    Energy label specifications according to European ErP directive

    • Heating energy efficiency Class A
    • Energy efficiency sanitary XXL profile Class A

    Heating/sanitary operation features:

    • Nominal heat input max/min (heating) PCI: 31-5.0 kW
    • Nominal heat output max/min (sanitary) PCI: 34.5-5.0 kW
    • Max/min useful thermal power (heating):30.2-4.7 kW
    • Efficiency at nominal heat output (60/80°C) PCI: 97.3%
    • Efficiency at nominal heat output (30/50°C) PCI: 106.5%
    • Efficiency at 30% (30° C) PCI: 109.3%
    • Max/min heating temperature (high temperature): 82-35°C
    • Max/min heating temperature (low temperature): 45-20°C
    • Max/min sanitary temperature: 65-40°C
    • Quantity of hot water (deltaT 25°C): 26.5 l/min
    • Quantity of hot water (deltaT 35°C): 18.9 l/min
    • Specific flow rate (first 10' with deltaT 30°C): 22.1 l/min
    • Minimum operating temperature > 0°C
    • Modulation ratio 1:7
    • Power supply voltage/frequency V/Hz 230-50
    • Total absorbed electrical power: 84W
    • Electrical system protection degree IP X5D
    • Dimensions 24 kW mm (HxWxD) 900 x 600 x 474
    • Power supply: Methane or LPG
    • LPG conversion kit as standard

    Functionality:

    • XtraTech™ stainless steel primary exchanger
    • AUTO, Comfort functions
    • Internal Installation

    CLASS B ONE

    • Ariston exclusive XtraTech™ stainless steel exchanger, with high prevalence
    • Exchanger passage sections +142% compared to the previous version
    • LCD display
    • 2 x 20 litre stainless steel stratification boilers
    • Class A+ in heating achievable with thermoregulation
    • Modulation ratio 1:7
    • BusBridgeNet® communication protocol
    • Optimized boiler heating logic
    • AUTO and Comfort function
    • Prepared for sanitary recirculation
    • Flue pipe 80, 60, 50 mm

    Comfort Function Speeds up the delivery of hot water in two modes: Comfort Plus Mode (always hot water in just 5") and Comfort Mode (hot water for 30' after the last dispensing).

    Auto Function Maximum comfort, efficiency and energy savings based on automatic analysis of environmental conditions, connected external devices and required performance.

    System Management New communication protocol designed to ensure complete system management.

    Super silence Silence in all operating modes.

    High efficiency Product characterised by high energy performance, reduced consumption and polluting emissions.

    Made in Italy Produced entirely in Italy.

    Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 35.0 kg
    • classe energetica produzione acs: A
    • classe energetica riscaldamento: A
    • gas: Methane/LPG
    • marca: Ariston
    • metri quadri : 250
    • modello: 3302128
    • potenza in kw: 35
    • potenza nominale: 35
    • superficie riscaldabile mq: 250
    • tipologia : Ad accumulo
    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Reviews of CaldaieMurali.it

    feedaty-widget

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account