icon Argo Condensing Boiler Mod. Condensy Smart Plus 24 Kw Complete With Smoke Kit | CaldaieMurali

Argo Condensing Boiler Mod. Condensy Smart Plus 24 Kw Complete With Smoke Kit

Description

ARGO condensing BOILER mod. CONDENSY SMART PLUS 24 kW complete with smoke kit


  • Heating/DHW energy efficiency class: Class A
  • Load profile: XL
  • DHW/heating nominal heat input: 24./20.6 kW
  • Sanitary nominal thermal power: 24 kW
  • Expansion vessel water capacity: 8 litres
  • Sanitary water production ΔT 25°C: 13.8 l/min
  • Minimum water flow rate of the DHW circuit: 2.0 l/min
  • Rated Electric Power: 85W
  • Degree of protection: IPX5D
  • Power supply: methane

ARGON

The new range of Condensy Plus 24-33 boilers consists of 2 models with instantaneous domestic hot water production. It was especially designed to be used when replacing with an older generation boiler. Everyone is aware of the advantages of condensing technology, i.e. high combustion efficiency and consequently energy savings and above all very low polluting emissions.

1:7 Very high modulation

Greater efficiency given by a reduced number of switching on and off, the high modulation ratio in fact allows a significant reduction in consumption up to 10% and consequently an equal reduction in polluting emissions. The adjustment of the thermal power with respect to the dissipated power also prevents the generation of excessive overheating/cooling of the rooms.
GAC system

Condensy boilers are equipped with an innovative electronic management system which, thanks to the new electronics and the new electronic gas valve, guarantees automatic combustion control to maximize consumption reduction during all operating periods. The advantages are:

• No manual intervention
• Reduced measurement, calibration or nozzle changes
• Self-adaptation to the gas quality and the length of the flue gas pipes to keep the efficiency constant
• The boiler regulates itself to reduce gas consumption and pollution thanks to the constant control of emissions

Digital control panel

In the new Condensy Plus, there is a digital control panel with a backlit LCD display, very intuitive and simple to use thanks to the symbols silk-screened on the keys. The display shows all the information and settings of the operating parameters in a clear and direct way.
2-speed modulating pump with de-aeration

The circulation pump of the Condensy Plus can operate at maximum or minimum speed or in "automatic": in the latter case, the speed (min./max) will be determined by the electronics which will have the task of maintaining a constant °C the delivery/return ΔT in heating, ensuring a significant reduction in pump consumption and also in maintenance costs, due to the lower mechanical stresses of a "normal pump" which always runs at maximum speed. When the boiler is switched on for the first time, it is possible to use the semi-automatic de-aeration function: by pressing the 2 keys for a few seconds, the function is activated which allows the elimination of the air present in the heating circuit. This avoids possible blockages of the boiler, overheating of the system and mechanical breakdowns. The electronic card will activate a 10 minute on/off cycle of the pump. The function will stop automatically at the end of the cycle.

Condensy Smart Plus

Wall-mounted condensing boiler with instant domestic hot water production

  • Digital control panel with backlit LCD display
  • Wide 1:7 modulation range; greater efficiency for fewer turns on and off
  • Automatic combustion control for constant maintenance of maximum efficiency values ​​- GAC (Gas Adaptive Control)
  • Complete soundproofing of the generator
  • Standard climate control (with external probe available as an option)
  • Arrangement for connection to a zone system
  • Arrangement for integration with solar system
  • Premix burner in AISI 316L stainless steel
  • Water/fume exchanger in AISI 316L stainless steel, with integrated condensate collection tray
  • Modulating fan with electronic speed variation
  • Electric three-way diverter valve
  • Increased DHW heat exchanger in stainless steel which facilitates condensation even in DHW operation
  • Automatic by-pass
  • Low consumption circulation pump and built-in deaerator
  • Heating circuit safety valve at 3 bar
  • Turbine flowmeter for greater comfort for the production of domestic hot water
  • Safety thermostat against overheating of the water/fumes exchanger
  • Safety thermostat against overheating of the water/fumes exchanger
  • Water circulation safety hydraulic pressure switch
  • NTC safety probe against fume overheating
  • Temperature control with NTC probes
  • Total antifreeze device
  • Pump anti-blocking system and three-way valve which intervenes every 24 hours
  • Pump post-circulation lasting 3 minutes which is activated in the heating function and after the main burner has switched off due to the intervention of the room thermostat.
  • Heating circuit digital pressure gauge (system pressure indication on the display)
  • Electronic thermometer

Argo Condensing Boiler Mod. Condensy Smart Plus 24 Kw Complete With Smoke Kit

Product form

ARGO condensing BOILER mod. CONDENSY SMART PLUS 24 kW complete with smoke kit Heating/DHW energy efficiency class: Class A Load... Read more

€579,50 Incl. VAT

    Description

    ARGO condensing BOILER mod. CONDENSY SMART PLUS 24 kW complete with smoke kit


    • Heating/DHW energy efficiency class: Class A
    • Load profile: XL
    • DHW/heating nominal heat input: 24./20.6 kW
    • Sanitary nominal thermal power: 24 kW
    • Expansion vessel water capacity: 8 litres
    • Sanitary water production ΔT 25°C: 13.8 l/min
    • Minimum water flow rate of the DHW circuit: 2.0 l/min
    • Rated Electric Power: 85W
    • Degree of protection: IPX5D
    • Power supply: methane

    ARGON

    The new range of Condensy Plus 24-33 boilers consists of 2 models with instantaneous domestic hot water production. It was especially designed to be used when replacing with an older generation boiler. Everyone is aware of the advantages of condensing technology, i.e. high combustion efficiency and consequently energy savings and above all very low polluting emissions.

    1:7 Very high modulation

    Greater efficiency given by a reduced number of switching on and off, the high modulation ratio in fact allows a significant reduction in consumption up to 10% and consequently an equal reduction in polluting emissions. The adjustment of the thermal power with respect to the dissipated power also prevents the generation of excessive overheating/cooling of the rooms.
    GAC system

    Condensy boilers are equipped with an innovative electronic management system which, thanks to the new electronics and the new electronic gas valve, guarantees automatic combustion control to maximize consumption reduction during all operating periods. The advantages are:

    • No manual intervention
    • Reduced measurement, calibration or nozzle changes
    • Self-adaptation to the gas quality and the length of the flue gas pipes to keep the efficiency constant
    • The boiler regulates itself to reduce gas consumption and pollution thanks to the constant control of emissions

    Digital control panel

    In the new Condensy Plus, there is a digital control panel with a backlit LCD display, very intuitive and simple to use thanks to the symbols silk-screened on the keys. The display shows all the information and settings of the operating parameters in a clear and direct way.
    2-speed modulating pump with de-aeration

    The circulation pump of the Condensy Plus can operate at maximum or minimum speed or in "automatic": in the latter case, the speed (min./max) will be determined by the electronics which will have the task of maintaining a constant °C the delivery/return ΔT in heating, ensuring a significant reduction in pump consumption and also in maintenance costs, due to the lower mechanical stresses of a "normal pump" which always runs at maximum speed. When the boiler is switched on for the first time, it is possible to use the semi-automatic de-aeration function: by pressing the 2 keys for a few seconds, the function is activated which allows the elimination of the air present in the heating circuit. This avoids possible blockages of the boiler, overheating of the system and mechanical breakdowns. The electronic card will activate a 10 minute on/off cycle of the pump. The function will stop automatically at the end of the cycle.

    Condensy Smart Plus

    Wall-mounted condensing boiler with instant domestic hot water production

    • Digital control panel with backlit LCD display
    • Wide 1:7 modulation range; greater efficiency for fewer turns on and off
    • Automatic combustion control for constant maintenance of maximum efficiency values ​​- GAC (Gas Adaptive Control)
    • Complete soundproofing of the generator
    • Standard climate control (with external probe available as an option)
    • Arrangement for connection to a zone system
    • Arrangement for integration with solar system
    • Premix burner in AISI 316L stainless steel
    • Water/fume exchanger in AISI 316L stainless steel, with integrated condensate collection tray
    • Modulating fan with electronic speed variation
    • Electric three-way diverter valve
    • Increased DHW heat exchanger in stainless steel which facilitates condensation even in DHW operation
    • Automatic by-pass
    • Low consumption circulation pump and built-in deaerator
    • Heating circuit safety valve at 3 bar
    • Turbine flowmeter for greater comfort for the production of domestic hot water
    • Safety thermostat against overheating of the water/fumes exchanger
    • Safety thermostat against overheating of the water/fumes exchanger
    • Water circulation safety hydraulic pressure switch
    • NTC safety probe against fume overheating
    • Temperature control with NTC probes
    • Total antifreeze device
    • Pump anti-blocking system and three-way valve which intervenes every 24 hours
    • Pump post-circulation lasting 3 minutes which is activated in the heating function and after the main burner has switched off due to the intervention of the room thermostat.
    • Heating circuit digital pressure gauge (system pressure indication on the display)
    • Electronic thermometer
    Data sheetData sheet
    • peso: 30.0 kg
    • marca: Argon
    • modello: argo-condensy
    Shipping detailsShipping details

    The order is processed according to the payment method chosen:

    for payments by CREDIT CARD, PAYPAL, MARK, the order is processed the same day. Orders placed before 2.00 pm will be managed on the same day. The BRT or GLS courier will collect the ordered goods from our warehouses the following morning.

    Subsequently, the courier assigns the shipment number (tracking number) and communicates the same to the customer via e-mail, allowing him to follow the delivery status and estimated times in real time on the brt.it or gls-grop.com website. 24-72 the courier will deliver the goods (excluding islands and disadvantaged areas) to the address indicated by the Customer at the time of order confirmation. Transport costs are charged to the customer and are calculated taking into account the volume and/or weight of the ordered item/s. However, product delivery times vary according to the requested item, payment methods and the delivery times chosen by the Customer, which is why the times indicated are merely indicative and cannot be considered binding for Decidiprezzo srl. Orders placed online are delivered throughout Italy, with the exception of Livigno, Campione d'Italia, Vatican City and the Republic of San Marino. In some periods of the year (summer period / Christmas period) the processing times could undergo changes compared to the standard ones declared above.

    NB: In the periods of July and August due to the high amount of orders, delivery times could be delayed

    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Recensioni di CaldaieMurali.it

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account