icon Acquabrevetti Minidos Proportional Mechanical Volumetric Dosing Pump For Dosing Acquasil 20/40® 1/2" F Cod. Pm009 | CaldaieMurali

Acquabrevetti Minidos Proportional Mechanical Volumetric Dosing Pump For Dosing Acquasil 20/40® 1/2" F Cod. Pm009

Description

Acquabrevetti MINIDOS proportional mechanical volumetric dosing pump for dosing AcquaSIL 20/40® 1/2" F Cod. PM009


  • DN ½” F connections
  • Minimum start-up flow rate l/min - m3 /h 3 – 0.18
  • Peak flow rate l/min - m3 /h 13.3 – 0.8
  • Min-max water hardness °f 5 - 35
  • Instantaneous maximum temp. / Maximum accumulation temp. °C 80 / 60
  • Tank volume cc 300
  • Bag volume - refill autonomy Tank volume - refill autonomy cm3 - m3 250 – 11/300 – 13
  • Min-max water pressure 1.5 - 6 bar
  • Min-max temperature of the water inside MiniDOS °C 5 – 30

MINIDOS water patents

Purpose

Purpose Limescale encrustations and corrosion are among the crucial problems afflicting plumbing and sanitary systems. The proportional dosage of anti-scaling and anti-corrosive products in the water represents a safe and consolidated technology which offers guarantees of success in the prevention of limescale deposits and corrosive processes. Polyphosphates, even at very low concentrations, are able to counteract the formation of lime scale and corrosion in the hot and cold water distribution lines. MiniDOS is a mechanical volumetric dosing pump with a patented design and technical concept capable of dosing AcquaSIL 20/40® (an aqueous solution of polyphosphates) in a precise and proportional manner, protecting the hydraulic circuits and the heat exchange equipment from encrustations and corrosion ensuring a dosage always lower than 5 mg/l of P2O5. Principle of operation

Principle of operation

MiniDOS does not require any electrical power. The dosage, precise and proportional in any operating condition, is started hydraulically by a mechanical system which, exploiting the movement of the water, introduces controlled quantities of AcquaSIL 20/40®. Through a mechanism known as the "threshold effect", polyphosphates, if present in the water in concentrations of a few mg/l, interfere with the crystallization phenomena of the carbonates, hindering the formation of incrustations. Furthermore, polyphosphates are able to form a protective film on metal surfaces, protecting them from any corrosive phenomena.

Main features

MiniDOS is completely self-priming; it is sufficient to periodically top up AcquaSIL 20/40® in the tank. The pump is protected from the back pressure of the hydraulic network by a non-return valve. The non-return system allows MiniDOS to be recharged without having to put the equipment in by-pass or shut off the hydraulic supply. The high injection frequency ensures homogeneity in the dosage. MiniDOS only doses the AcquaSIL 20/40® product, a combined solution of food-grade polyphosphates specific for the treatment of drinking water used to prevent scaling and corrosion for water with a temporary hardness between 5 and 35°f. The stabilizing properties of the AcquaSIL 20/40® product are guaranteed for instantaneous temperatures up to 80 °C and accumulation temperatures up to 60 °C. The AcquaSIL 20/40® product not only protects new equipment and hydraulic circuits but is also able to gradually restore already encrusted circuits.

Maintenance and durability

Maintenance and duration MiniDOS requires periodic filling of the AcquaSIL 20/40® tank. For correct management of MiniDOS it is advisable to carry out at least two yearly checks.

amenities

MiniDOS is supplied in a plastic bag inside a cardboard box. The standard supply includes: MiniDOS pump, DIMA attachment (for code PM008), AcquaSIL 20/40® first refill in a 250 g bag, instruction manual (including the declaration of conformity), guarantee certificate


Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Acquabrevetti Minidos Proportional Mechanical Volumetric Dosing Pump For Dosing Acquasil 20/40® 1/2" F Cod. Pm009

Product form

Acquabrevetti MINIDOS proportional mechanical volumetric dosing pump for dosing AcquaSIL 20/40® 1/2" F Cod. PM009 DN ½” F connections Minimum... Read more

€75,00 Incl. VAT

    Description

    Acquabrevetti MINIDOS proportional mechanical volumetric dosing pump for dosing AcquaSIL 20/40® 1/2" F Cod. PM009


    • DN ½” F connections
    • Minimum start-up flow rate l/min - m3 /h 3 – 0.18
    • Peak flow rate l/min - m3 /h 13.3 – 0.8
    • Min-max water hardness °f 5 - 35
    • Instantaneous maximum temp. / Maximum accumulation temp. °C 80 / 60
    • Tank volume cc 300
    • Bag volume - refill autonomy Tank volume - refill autonomy cm3 - m3 250 – 11/300 – 13
    • Min-max water pressure 1.5 - 6 bar
    • Min-max temperature of the water inside MiniDOS °C 5 – 30

    MINIDOS water patents

    Purpose

    Purpose Limescale encrustations and corrosion are among the crucial problems afflicting plumbing and sanitary systems. The proportional dosage of anti-scaling and anti-corrosive products in the water represents a safe and consolidated technology which offers guarantees of success in the prevention of limescale deposits and corrosive processes. Polyphosphates, even at very low concentrations, are able to counteract the formation of lime scale and corrosion in the hot and cold water distribution lines. MiniDOS is a mechanical volumetric dosing pump with a patented design and technical concept capable of dosing AcquaSIL 20/40® (an aqueous solution of polyphosphates) in a precise and proportional manner, protecting the hydraulic circuits and the heat exchange equipment from encrustations and corrosion ensuring a dosage always lower than 5 mg/l of P2O5. Principle of operation

    Principle of operation

    MiniDOS does not require any electrical power. The dosage, precise and proportional in any operating condition, is started hydraulically by a mechanical system which, exploiting the movement of the water, introduces controlled quantities of AcquaSIL 20/40®. Through a mechanism known as the "threshold effect", polyphosphates, if present in the water in concentrations of a few mg/l, interfere with the crystallization phenomena of the carbonates, hindering the formation of incrustations. Furthermore, polyphosphates are able to form a protective film on metal surfaces, protecting them from any corrosive phenomena.

    Main features

    MiniDOS is completely self-priming; it is sufficient to periodically top up AcquaSIL 20/40® in the tank. The pump is protected from the back pressure of the hydraulic network by a non-return valve. The non-return system allows MiniDOS to be recharged without having to put the equipment in by-pass or shut off the hydraulic supply. The high injection frequency ensures homogeneity in the dosage. MiniDOS only doses the AcquaSIL 20/40® product, a combined solution of food-grade polyphosphates specific for the treatment of drinking water used to prevent scaling and corrosion for water with a temporary hardness between 5 and 35°f. The stabilizing properties of the AcquaSIL 20/40® product are guaranteed for instantaneous temperatures up to 80 °C and accumulation temperatures up to 60 °C. The AcquaSIL 20/40® product not only protects new equipment and hydraulic circuits but is also able to gradually restore already encrusted circuits.

    Maintenance and durability

    Maintenance and duration MiniDOS requires periodic filling of the AcquaSIL 20/40® tank. For correct management of MiniDOS it is advisable to carry out at least two yearly checks.

    amenities

    MiniDOS is supplied in a plastic bag inside a cardboard box. The standard supply includes: MiniDOS pump, DIMA attachment (for code PM008), AcquaSIL 20/40® first refill in a 250 g bag, instruction manual (including the declaration of conformity), guarantee certificate


    Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    Data sheetData sheet
    • peso: 1.0 kg
    • marca: AcquaPatents
    • modello: PM009
    Icon for coinShipping cost

    Shipping costs vary according to the weight of the order.

    Consult the tables with the weights for Italy and for the smaller islands and disadvantaged areas.

    Warranty detailsWarranty details

    Pursuant to art. 63 of the Consumer Code, the risk of loss and damage to the goods, for reasons not attributable to the seller, is transferred to the consumer when the latter, or a third party designated by him and other than the carrier, physically comes into possession of goods. However, the risk is transferred to the consumer as soon as the goods are delivered to the carrier. The Customer who at the time of purchase has decided to make use of the extra insurance service for the transport of the purchased goods, in the event that he finds anomalies at the time of delivery (packaging damaged or otherwise altered in the closing seals, damaged product or scratched, missing one or more packages ordered), must accept the product by writing on the document provided by the carrier: "WE ACCEPT WITH RESERVE" + description of the anomaly found. In fact, to enforce the insurance coverage it is not sufficient to note "ACCEPTED WITH RESERVE" or "ACCEPTED WITH SUBJECT TO INSPECTION", BUT the reason for the reservation must be explained in detail. If the package or the product should show visible damage, scratches or any other type of anomaly and the courier should refuse to affix a specific reserve, the goods must be refused and the incident reported immediately (and in any case in a timely manner) to the Customer Service of Decidiprice srl. In any case, without prejudice to the seller's obligations in terms of legal guarantee pursuant to articles 128 et seq. of the Consumer Code, Decidiprezzo srl will not be held responsible for any anomalies found in the state of the product, after delivery, if the Customer, in the presence of an anomaly, has accepted the package without making a specific reservation (in the corrected above). Any damage or anomalies must be reported to Customer Service by email to postvendita@climaconvenienza.it. The request must be forwarded no later than 8 calendar days from receipt of the goods. Any notification beyond the aforementioned terms will not be taken into consideration.

    Customer service detailsCustomer service details

    Our customer service department is dedicated to providing support to our customers with any problems or questions they may have before or after purchasing our products.

    Use the direct communication channel to speak to one of our operators, or send us an email to one of the addresses listed on the contact us page.

    Our customer service team is made up of highly trained professionals who are always ready to help customers solve any problem or answer any question quickly and efficiently. We are committed to ensuring maximum customer satisfaction and providing the highest quality after-sales service. So if you need any assistance, don't hesitate to contact us; we will be happy to help you in any way we can.

    Reviews of CaldaieMurali.it

    feedaty-widget

    Latest Products Viewed

    Login

    Forgot your password?

    Don't have an account yet?
    Create account