Accoroni Ghibli 6 Elite Electronic Gas Radiator 4.91 Kw Methane Or LPG

The cover is made of epoxy powder coated steel sheet, with side panels in heat-resistant nylon. The two grilles for air intake and delivery are located respectively in the lower area and in the upper area of ​​the casing. The control panel is located on the front of the appliance, which includes:

- the on/off switch
- the convection fan speed switch (models 5 and 6)
- the release button of the burner command and control box
- the block status (red) and heat request (green) light signaling LEDs
- the room thermostat adjustment knob

In the back you will find:

- the connection for the combustion air inlet and combustion products evacuation duct
- the holes for fixing the appliance to the wall

Inside the appliance you will find:

- the combustion chamber and the finned heat exchanger with the fume extraction fan located downstream of the circuit
- the atmospheric burner with axial flame development complete with ignition and flame detection electrode
- the tangential convection fan in the GHIBLI 4 Elite model and the centrifugal type with double impeller and central motor in the Ghibli 5 and 6 Elite models
- the fan control and safety thermostat
- the electrical panel including the burner control equipment, the gas unit and the room thermostat

The GHIBLI ELITE gas radiator is ideal for heating or integrating space heating, even for occasional use in buildings to be renovated and holiday homes. ELITE IN SAFETY The special steel combustion chamber is completely sealed and in depression, with the fan placed downstream of the combustion circuit, to make the appliance extremely safe.

1) Sealed combustion circuit with respect to the environment
2) Circuit under depression with respect to the environment
3) The combustion circuit of the appliance, thanks to the fumes extraction fan placed upstream, is constantly under depression with respect to the environment in which it is installed. In this way, any deterioration in the tightness of the circuit (due exclusively to anomalous operating conditions) will never cause the release of unburnt or toxic gases into the internal environment.


ELITE IN CONSTRUCTION

The nickel-plated exchanger is equipped with special fins to increase the efficiency of the heat exchange. The particular design of the burner allows a low value of polluting emissions of both CO and NOx. The suitably studied geometry of the shell allows for external contact temperatures (even accidental) in line with the strictest regulations. The chamber made entirely of steel with a nickel-plating treatment makes the Ghibli Elite gas radiator extremely resistant, long-lasting and pleasing to the eye. Thanks to the use of high air flow rate fans with reduced number of revolutions, a comfortable air outlet temperature and good silence are obtained, without the danger of getting burned if the external covering mantle is accidentally touched.


ELITE IN DIMENSIONS

The dimensions are the most compact ever among the products on the market. The very low height allows easy installation under the window. SPLITTER With the splitter it is possible to solve the problems due to the positioning of the smoke outlet. The intake and exhaust ducts are separated and can cover distances of up to 3m each. Using the 90° bends it is possible to bring the ducts sideways. For each bend it will be necessary to reduce the total length of the 3 m air duct by 50 cm.