Technical features Nominal capacity 155l Energy class B L withdrawal profiles Thermal power 9.5 kW Useful power 8.5 kW Heating time (ΔT= 45°C) 62 min Nominal pressure 8 bar Dimensions (height x diameter) 1290 x 1450 mm General characteristics SGA X Low NOx storage gas water heater. SGA X is the storage gas water heater suitable for floor installations . It is equipped with a large magnesium anode functional to the electrochemical protection of the enamelled steel boiler. SGA X allows the user to adjust the temperature thanks to the knob placed on the front and the fact that it does not require electrical connections makes it easy to install. It is designed for methane gas but at the same time it can be converted to LPG using the nozzle kit included in the package. It is available in capacities of 120-160-200-300 litres. Characteristics: Low NOx: ErP compliant 09/26/2018 Operation without electrical connections Piezo ignition system Enamelled boiler Magnesium anode Prepared for LPG transformable methane gas (nozzle kit included) Operation even at minimum water pressures Gas valve with triple safety MADE IN ITALY Made entirely in Italy. EXTERNAL TEMPERATURE REGULATION It allows the user to choose the temperature that best suits his needs. Ecodesign Directive After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling? Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹. How to read energy labels There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

General characteristics Brand: Atlantic EAN: 3410538530431 Capacity: 80L Model: EGO LT 80 Orientation: Horizontal Data sheet Absorbed power (W): 1500 Voltage (V): 230 (220-240) Energy consumption (kWh/24h at 65°C): 1.55 Heating time at 35°C (Δt=20°C): 1h36 Heating time at 60°C (Δt=50°C): 2h38 Dimensions A: 800 B: 433 C:349 Q: 451 E: 234 F: 343 Net weight (Kg): 20 Article description Left side electrical connection. Bottom side hydraulic connection. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview GAS WATER HEATER VAILLANT ATMOMAG MINI 11-0/1 XI LPG. Open Room WITH NATURAL DRAFT Technical specifications ErP energy class: Class A Nominal heat output: 19.2 kW DHW direct withdrawal range T = 25C: 2.5 - 11 l/min Chamber Open to natural draught Ignition: electronic Compact dimensions (HxWxL): 580/255/310 mm Power supply: LPG Features list atmoMAG MINI Instantaneous water heaters with electronic battery ignition. atmoMAG XI are natural draft water heaters with electronic ignition powered by batteries. Saving safety without electric energy aids. The Direct Start system allows for faster ignitions. The ionization flame detection ensures operational reliability. The adoption of the OPTI MOD system for flame regulation allows you to adapt the water temperature to the changing seasons with a quick gesture. In the mini version, the features and functions remain unchanged and the small dimensions become the motif of choice in some living situations. atmoMAG XI (hot water production) the atmospheric version with DHW flow rate of: 14 litres/minute Methane LPG atmoMAG XI mini (hot water production) the atmospheric version with DHW flow rate of: 11 litres/minute Methane LPG Characteristics: Compact size Manual range selector Automatic flame modulation LCD display Domestic hot water Power selectable on 10 levels Ionization flame control New hydraulic groups Exchanger with Supral protection ErP and ELD: what they mean and how they differ ErP: The EU has issued new obligations for Energy Using Products (ErP). The new directive, known as the Ecodesign directive, prescribes minimum efficiency requirements and emission limits for appliances that produce heating and domestic hot water. The Ecodesign directive addresses two relevant product categories for installers and retailers in the sector: - Category 1 includes space heating appliances; in particular: electrical, gas and diesel appliances such as boilers, heat pumps and cogenerators. - Category 2 Includes appliances for the production of domestic hot water: electric, gas, diesel such as water heaters, heat pumps for DHW, solar systems up to 400 kW and boilers up to 2000 litres. ELD: In addition to the ErP directive, the EU has also introduced a mandatory energy labeling for the same type of appliances up to 70 kW and boilers up to 500 litres. The energy labeling directive is called ELD and requires that new products and systems for heating and domestic hot water production are labeled with an indication of their energy efficiency class. By combining products and components, for example by adding a temperature control unit, the energy classification of the system can be increased, which will be calculated by the installer and indicated on the package label. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Electric water heater Ferroli Calypso Smart SVE 150 Liters Vertical - 2 Years Warranty Technical features Model : Calypso Smart 150 SVE Code : A E600B7KA Tank capacity: 150 litres Electric Power: 1500 W Load profile : L ERP class : C Heating time (20+55°C) : 4h - 15 minutes Warranty : 2 Years Dimensions and weight : Height : 1175mm Diameter : 438mm Weight : 35KG Calypso Smart Medium Liter Electric Water Heaters Electric storage water heaters with very high efficiency, vertical and horizontal development with capacities from 50 to 150 litres. Endowed of : Electronic control of the '' SMART '' type able to optimize consumption according to the user's needs Control panel with luminous LEDs for reading the operating temperatures and operating status and convenient buttons for managing the water heater Magnesium anode to protect the tank 5-bolt flange to ensure sturdiness and facilitate periodic maintenance Safety valve set at 8 bar Supplied with three-pole electric cable without plug Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product data for energy consumption - according to requirements of EU regulations no. 811/2013 and 812/2013 to complete the directive 2010/30/EU LPG code: T4200 18-2 31 Water heating energy efficiency class B Declared load profile XL Open chamber with natural draft Nominal heat output (Pn) [kW] 30.5 Nominal heat input (Qn) [kW] 34.5 Max water flow at ΔT 25 °C [l/min] 17.6 Max water flow with ΔT 25 °C [l/min] 8.8 sound pressure max. [dB(A)] 65 Weight (without packaging) [kg] 15 Dimensions (H x W x D) [mm] 655 x 425 x 334 Junkers Bosch water heaters With Junkers Bosch gas and heat pump water heaters you are assured of the best technology for the production of domestic hot water, always available and perfectly tailored to the user's needs: high quality, maximum efficiency and safety, ease of installation and control savings on bills. What to ask for more? Whatever your choice, choose quality. The wide range of Junkers Bosch gas and heat pump water heaters is able to meet the needs of your customers, to whom you can offer the most suitable solution for their home. Junkers Bosch gas water heaters are available in numerous models, to meet the most diverse needs: from the smallest ones, also suitable for being inserted in kitchen wall units, to those specifically designed for outdoor installation or for large buildings. Today it is possible to satisfy domestic hot water needs also through renewable energy sources: this allows not only economic savings, but also a contribution to environmental protection. Junkers Bosch heat pump water heaters are able to supply all the hot water needed in an efficient, convenient and sustainable way, obtaining energy from the external environment and using it to heat the water. Whatever your customers' requests, with Junkers Bosch you are sure to guarantee the best response. Environmentally friendly efficiency Choosing a gas water heater can also take advantage of renewable energy sources: all gas water heater models can be fully integrated, thanks to the Solar Kit accessory, in new or existing thermal solar systems, for exploit the inexhaustible energy of the sun for the production of domestic hot water. General characteristics THERM 4200 THERM 4200, the instantaneous gas water heater with compact dimensions, which reduces consumption and helps to protect the environment. Advantages ▶ It guarantees maximum safety thanks to a triple system which includes the smoke exhaust sensor, the temperature limiter and the flame ionisation control (which interrupts the gas flow in the event of ignition failure or accidental shutdown). ▶ Easily adjusted using the intuitive control panel ▶ It can be connected directly to solar thermal systems for the production of domestic hot water Characteristics ▶Electronic ignition by batteries ▶Continuous flame modulation ▶Works even in case of very low water pressures ▶Extremely compact size The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, in order to be placed on the market, heating and hot water production systems will have to comply with the ErP (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of the appliances, favoring their comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating and domestic hot water production. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding less performing technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent concrete help for the consumer, allowing him to learn more about the characteristics of the system, acquire greater awareness of the energy savings allowed and make the best choice of what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the former is supplied by the manufacturer together with the product for heating and/or domestic hot water production appliances the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing the score attributed to each appliance to increase and increasing the energy class of the system: it is therefore the task of whoever makes/installs the system to supply the consumer the correct explanatory label. The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on home consumption, approximately 80% of which is due to heating and the production of hot water, and are already being incentivized at a tax level today. Junkers Bosch is already in line with the dictates of the ErP legislation, demonstrating the future orientation that has always distinguished the brand. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

.

Read more less

Gas water heater Sime Mini 12 BF sealed chamber complete with smoke exhaust kit cod. 8112630 Mini BF ErP 12 Nominal thermal power kW 21.0 Nominal heat input kW 24.0 Sanitary flow rate ∆t 25°C l/min 12 DHW energy efficiency class A ACS size M Maximum/minimum water pressure 7/0.2 bar Electric power absorbed W 33 IP degree of protection IPX4 Gas supply 1/2” Sanitary water inlet 1/2” Sanitary water outlet 1/2” LPG supply Dimensions HxWxD 570x345x150 mm Sime Mini BF The Mini BF ErP water heater stands out for its modern line and its particularly small dimensions, especially in depth, which make it adaptable to any available space. It can be installed outdoors, in a partially protected place with a minimum design temperature of 0°C, it is equipped with automatic electronic ignition and flame modulation according to the water flow rate and can easily reach a correct and constant temperature, even with network pressure variations. Mini BF ErP can receive pre-heated water from a solar system with a temperature between 35° and 65°C. Depending on the selected setpoint and the inlet water temperature, the power is modulated to obtain maximum comfort, avoiding unnecessary switching on. CAN BE INSTALLED INDOOR OR OUTDOOR (In a partially protected place) INTERFACE WITH MULTIFUNCTION LED DISPLAY Prepared for solar thermal Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: PRODUCT DISCONTINUED THE NEW MODEL OPALIA C LOW NOX WILL BE SHIPPED GAS WATER HEATER SAUNIER DUVAL OPALIA C 11 E - A/1 METHANE, Open Room: instantaneous gas water heater for the production of domestic hot water. Technical specifications Model: ErP efficiency class in heating/DHW: B Healthcare professional profile: M Combustion chamber: open to natural draft Sanitary Rated power min/max: kW 10.7/19.2 Type of regulation: Modulating Ignition type: Electronic Specific flow rate (T=25 K): l/min 11 Minimum ignition flow l/min 2.7 Minimum supply pressure 0.2 bar Electrical characteristics Supply voltage (V/Hz): 2 batteries Dimensions: Dimensions (hxlxp): 575x310x220 mm ; 10.3 Kg Diameter of the flue pipe mm 110 Methane code - 10013747 METHANE version Features list OPALIA The entire range of Opalia water heaters is characterized by the extreme ease of use, the reliability of the performances combined with a modern design and simplicity of use. The Opalia model is available in the Open Chamber and 2 - Sealed Chamber water heaters, from 11 to 14 litres, all equipped with electronic ignition with safety lock in the event of pilot flame failure. Characteristics: Modern design with compact dimensions: the water heaters can be easily installed in any room, even inside the kitchen cabinets. Maximum safety: the safety thermostat intervenes in the event of overtemperature of the domestic hot water; the ionization flame control blocks the gas supply in the event of a flame failure at the burner; in the Open Chamber models, the anti-fume backflow safety device blocks the water heater in the event of a risk of fumes entering the environment. Electronic control (only for models with 2 - Sealed chamber water heaters): it is possible to optimally adapt the operation of the appliance to the conditions of use and the temperature of the hot water, guaranteeing maximum sanitary comfort and optimizing gas consumption. Any malfunctions are signaled on the LCD display. Opalia C 11 E - A/1 and C 14 E - A/1 Open Chamber instantaneous gas water heaters Electronic ignition card for: intermittent pilot flame ignition and to control the lack of burner flame. Fume discharge safety sensor that blocks the water heater in case of risk of fumes being released into the environment. Safety thermostat which blocks the water heater in the event of domestic hot water overheating at the exchanger outlet. Diaphragm gas valve. Flow sensor. Copper lamellar heat exchanger. Domestic hot water temperature selector. Gas power selector. All ready for Energy Labeling 1. ErP, Ecodesign and ELD. What do they mean and how do they differ ErP and Ecodesign: The EU has issued new obligations for Energy Using Products (ErP). Known as the Ecodesign Directive, it prescribes minimum efficiency requirements and emission limits for DHW heating appliances up to 400 kW. ELD: In addition to the ErP Directive, the EU is also introducing mandatory energy labeling for the same type of appliances up to 70 kW. The Energy Labeling Directive (ELD) requires that new products and systems for heating DHW production are labeled with an indication of their energy efficiency class. 2. Which products are affected by the new directives The Ecodesign directive addresses two product categories that are relevant to our installers and resellers. Category 1: Includes electric, gas and oil space heaters, combi boilers, heat pumps and cogenerators. Category 2 : includes electric, gas and oil-fired DHW production equipment, DHW heat pumps and solar systems. By combining these products and components, for example by adding a temperature control unit, the energy classification of the system can be increased, which will be calculated by the installer and indicated on the package label. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Technical features Model: Bandini C65 Thermal dispersion 65° (KWh/24h): 0.42 Electric power: 2x800 / 2x1200 Voltage (V): 230 Heating time (Δt 50°): 120' / 80' Maximum Operating Temperature (C°):50 Maximum Operating Pressure (bar): 8 Humidity protection: IPX4 Insulation class: l Profile: M Energy Class: B size: A(850); B(470); C:(330); F(130); G(385); G(250); P(2580) Warranty: 5 years General characteristics C65 VERTICAL/HORIZONTAL Wall mounted electric storage water heater, 65 litres, vertical or horizontal installation. - Innovative design. - Double boiler and double resistance. - SMART thermostat with high energy efficiency. - Flexibility in installation. - Small dimensions to guarantee the possibility of installation even in small spaces. - Glass-porcelain internal boiler. - Available with 2 resistors of 800W (1600W) or 2 resistors of 1200W (2400W) - Polyurethane foam insulation. - Two magnesium anodes. - Flange. - Armored resistances in copper. - Digital external thermometer. - Safety valve. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ARISTON ELECTRIC STORAGE WATER HEATER SHAPE ECO EVO 100 V/5 EU VERTICAL 100 LITERS - NEW Technical features Product code: 3626086 Energy label specifications according to the European ErP directive Energy efficiency: Class B Withdrawal profile: M profile Characteristics of heating/DHW operation: Capacity: 100 litres Installation: vertical Power: 1500W Voltage: 230V Heating time (ΔT=45°C): 3.40 Max working pressure: 8 bar Max operating temperature °C 80 Net weight: 27kg Protection: IPX4 Dimensions: 927x476x489mm SHAPE ECO evo Shape Eco is the new generation of water heaters characterized by quality and efficiency designed to meet the different needs of consumers. A perfect blend of technology and design, Shape Eco offers, integrated, the most modern technologies such as ECO, Nanomix+Best and ABS safety package, together with a new design with a prismatic shape. The SHAPE ECO comes in the 50, 80 and 100 liter versions. Characteristics: Exclusive design Precise and customizable temperature regulation ECO/EVO function (patented) Easy and immediate reset Large size polyurethane insulation Safety valve tested at 8 bar Enamelled titanium boiler tested at 16 bar 5 bolt flange ANTI-LEGIONELLA function To ensure maximum safety and hygiene, the new Ariston products with ABS package are equipped with the anti-legionella function which, if this does not happen for 30 consecutive days, heats the stored water up to 65° c. ANTI-FREEZE function If the water heater is connected to the electricity line, the resistance is activated when the accumulated water temperature drops below 5°C. This system avoids possible breakage due to the expansion caused by the freezing of the water inside. SELF-DIAGNOSTICS function In the event of a fault, the water heater displays the type of problem that has occurred on the front panel via LEDs, allowing for faster repairs. ANTY-DRY function a protection system designed to ensure that the water heater does not turn on in the event of a lack of water in the boiler, thus avoiding internal overheating and the consequent breakage of internal components. ELECTRICAL SAFETY function ACTIVE At the end of each water heating cycle, the water heater performs a double disconnection from the electricity line, thus guaranteeing complete safety. Function ECO is a software that maximizes savings by self-learning the user's consumption: it optimizes the production of hot water and minimizes waste Ecodesign Directive After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: SINCE THIS PRODUCT IS DISCONTINUED, THE NEW AVENIR OUTDOOR LNX MODEL WILL BE SHIPPED AT THE END OF STOCKS CHAFFOTEAUX FLUENDO AVENIR OUTDOOR WATER HEATER 20 LT EU METHANE - NEW ErP Technical features Product code: 3632265 Energy label specifications according to the European ErP directive Sanitary Energy Efficiency Class B Withdrawal profile: XL Description: Model: 20 LT EU Professional Range Ignition: electronic flame ionization Type: Forced flow open chamber for outdoor use Dimensions (hwxd): 582 x 375 x 160mm ; 17.5Kg Operating characteristics: Nominal heat input: 40 kW Nominal heat output: 36.1 kW Methane/LPG supply pressure: 20/37 mbar Consumption - Methane/LPG max flow rate/h: 4.22/3.09 m3/h Selectable min/max temperature: 35-70°C Hydraulic characteristics: Minimum/maximum nominal pressure: 0.1/8.5 bar Minimum operating flow: 3.8 l/min Flow rate with temperature difference (∆t 25°C): 20 l/min Electrical circuit: Maximum absorbed power: 63 kW Electrical protection type: IPX5D Diet: Gas: LPG or CNG New professional range for Fluendo Avenir Outdoor Chaffoteaux confirms its specialized expertise in the design and manufacture of high quality products and systems for environmental comfort and sanitary water, expanding the range of instantaneous gas water heaters with the professional models of Fluendo Avenir Outdoor. Fluendo Avenir Outdoor is now also available in the new 20 and 24 l/min versions which allow cascade installation of up to a maximum of five products with a special control unit. The introduction of these two new professional models, which join the 11 and 16 l/min configurations for domestic use, makes this range extremely flexible with a thermal power that can vary from 4 kW to 211.5 kW.i. External installation. Ideal for installations with smoke evacuation problems. Minimum activation pressure 0.1 bar. Overtemperature control. Standard antifreeze kit: up to -20°C. Possibility of cascade installation (up to max 5 products) with PROFESSIONAL models. Characteristics: Ease of use - The user can adjust the domestic hot water to the desired temperature between 35° and 70°C using a wired remote control for remote temperature viewing and modification. Presence in the packaging of the 30-meter cable for the remote control. Easy installation - With the new Fluendo Avenir Outdoor installation times and related costs are reduced. All this thanks to its compact size, low weight and outdoor installation. The gas water heater <35 kW for single-family use is released from the limitations of Legislative Decree 192/05. Easy maintenance - Maintenance of the water heater is facilitated by the ability to view error codes on the remote control's LCD display. The components are replaceable from the front. Dedicated filters that clean easily. High efficiency - performance above 90% efficiency thanks to pre mix technology (modulation ratio up to 1:6). Speed ​​modulation - optimization of maximum efficiency also thanks to the modulating fan. Automatic flow regulator with stepper motor - In order to obtain maximum hot water delivery stability, the automatic flow regulator reduces the water flow until the desired temperature is obtained Sanitary comfort Modulating: allows great energy savings and offers greater comfort with a stable temperature in the presence of simultaneous requests for hot water. Thermostatic: high precision NTC probes to measure the cold water inlet temperature and hot water outlet temperature. Solar kit: the thermostatic valve allows you to connect the water heater to solar systems. An ecological solution to save energy. Cascade: possibility of managing up to 5 products with a special control unit (PROFESSIONAL RANGE). Flexibility: up to 211.5 kW of thermal power. Comfort of use and installation Minimum depth of only 13 cm (models for domestic use). Compatible with solar systems for greater gas savings. Maximum security thanks to installation outside the home. Quick and easy installation thanks to the fact that it does not require a smoke outlet. Standard antifreeze kit and maximum electrical protection IPX5D. Standard wired remote control to view and change the temperature. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.  

Read more less

GAS WATER HEATER ARISTON NEXT OUTDOOR 24 EU MET - new ErP model Product code: 3632260 Energy label specifications according to the European ErP directive Energy efficiency: Class B Load profile: XXL profile Characteristics of heating/DHW operation: CE certification (pin) 0051CM4090 Category II 2H3P Nominal thermal power kW 42.3 Minimum thermal power kW 7.2 Modulation range 1 : 5.9 Nominal heat input kW 47 Min/max temperature selectable 35-70 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow rate l/min > 3.8 Flow rate (ΔT 25°C) l/min 24 Supply voltage (frequency 50 HZ) V 230-50 Maximum absorbed power W 63 Minimum ambient temperature of use °C -20 Electrical protection type IPX5D Dimensions (HxWxD): 582 x 375 x 160 mm Weight: 17.5kg Power supply: LPG or methane Next Outdoor EU The generation of gas water heaters for outdoor use Next Outdoor, the new instantaneous gas water heater for outdoor use. Featuring an exclusive design, small size (only 13cm deep!) and new features. Next outdoor offers maximum temperature stability thanks to the electronic modulation of the gas and the fan, the wide modulation ratio between the maximum and minimum power, and the automatic water flow regulator. With the bathroom function, Next outdoor allows you to have the ideal quantity and temperature for maximum relaxation. Thanks to the introduction of the PROFESSIONAL 20 and 24 l/min models, the Ariston range for the outdoor version is completed, without however renouncing an attractive design and the compactness that distinguishes it on the market. The Next Outdoor, thanks to the remote control, has all the functions at hand and the small size makes it easily adaptable to any type of outdoor environment. Furthermore, thanks to the models of the new PROFESSIONAL range (20 and 24 l/min) it is able to manage up to a maximum of 5 products in cascade. Next Outdoor is the most efficient in its category and can also be integrated with solar systems. Thanks to the kit with thermostatic valve, the NEXT OUTDOOR is set up for integration and management of solar systems. An ecological and clean solution to avoid waste and encourage energy saving. Characteristics: External installation type A3 It does not require a fume exhaust system Standard remote control: with the remote control it is possible to change the temperature from anywhere in the house Electronic ignition (220 v) with ionization flame sensor and consequent gas savings of up to 25% Maximum efficiency > 90% Modulation ratio 1:6 Automatic flow regulator with stepping motor Electronic thermostatic modulation for precise temperature control Minimum activation pressure at 0.1 bar Standard antifreeze function: up to -20° Cascade solution up to 5 products (only with models 20 and 24) Integration with solar thermal via thermostatic valve Small size Absolute safety thanks to the IPX5D electrical protection Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less