ATTENTION In the absence of the THERM 4600 product, the subsequent THERM 5600 model will be shipped! Technical characteristics Product data for energy consumption - according to requirements of EU regulations no. 811/2013 and 812/2013 to complete the directive 2010/30/EU CNG code: T4600 S 18-D 23 Water heating energy efficiency class A Declared load profile XL Forced draft sealed chamber Nominal heat output (Pn) [kW] 31.6 Nominal heat input (Qn) [kW] 34 Power setting/modulation range (Pn,min. - Pn,max.) [kW] 4.8-31.6 Max water flow with ΔT 25 °C [l/min] 18 Max water flow with ΔT 35 °C [l/min] 19 Efficiency at 100% rated power (on PCI) [%] 92 Power supply [V(AC)] 230 Maximum absorbed power [W] 100 Degree of electrical protection [IP] IPX4D Weight (without packaging) [kg] 12 Dimensions (H x W x D) [mm] 568 x 364 x 175 Junkers Bosch water heaters With Junkers Bosch gas and heat pump water heaters you are assured of the best technology for the production of domestic hot water, always available and perfectly tailored to the user's needs: high quality, maximum efficiency and safety, ease of installation and control savings on bills. What to ask for more? Whatever your choice, choose quality. The wide range of Junkers Bosch gas and heat pump water heaters is able to meet the needs of your customers, to whom you can offer the most suitable solution for their home. Junkers Bosch gas water heaters are available in numerous models, to meet the most diverse needs: from the smallest ones, also suitable for being inserted in kitchen wall units, to those specifically designed for outdoor installation or for large buildings. Today it is possible to satisfy domestic hot water needs also through renewable energy sources: this allows not only economic savings, but also a contribution to environmental protection. Junkers Bosch heat pump water heaters are able to supply all the hot water needed in an efficient, convenient and sustainable way, obtaining energy from the external environment and using it to heat the water. Whatever your customers' requests, with Junkers Bosch you are sure to guarantee the best response. Environmentally friendly efficiency Choosing a gas water heater can also take advantage of renewable energy sources: all gas water heater models can be fully integrated, thanks to the Solar Kit accessory, in new or existing thermal solar systems, for exploit the inexhaustible energy of the sun for the production of domestic hot water. General characteristics THERM 4600 S Therm 4600 S is the extremely compact instantaneous gas water heater and thanks to its high efficiency it guarantees reduced consumption Advantages ▶ Comes with an easy and intuitive backlit LCD display ▶ It can be connected directly to solar thermal systems for the production of domestic hot water ▶ Guarantees reduced gas consumption thanks to the electronic temperature control ▶ Thanks to the OptiFlow patent, it automatically recognizes the lengths of the flue gas intake and exhaust system Characteristics ▶ Flame ionisation electronic ignition ▶ High efficiency and wide modulation range (1:7) ▶ Works even in case of very low water pressures ▶ Extremely compact dimensions ▶ Indoor installations The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, in order to be placed on the market, heating and hot water production systems will have to comply with the ErP (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of the appliances, favoring their comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating and domestic hot water production. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding less performing technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent concrete help for the consumer, allowing him to learn more about the characteristics of the system, acquire greater awareness of the energy savings allowed and make the best choice of what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the former is supplied by the manufacturer together with the product for heating and/or domestic hot water production appliances the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing the score attributed to each appliance to increase and increasing the energy class of the system: it is therefore the task of whoever makes/installs the system to supply the consumer the correct explanatory label. The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on home consumption, approximately 80% of which is due to heating and the production of hot water, and are already being incentivized at a tax level today. Junkers Bosch is already in line with the dictates of the ErP legislation, demonstrating the future orientation that has always distinguished the brand. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: Bandini ST 80 Thermal dispersion 65° (KWh/24h): 1.32 Electric Power: 1200W Voltage (V): 230 Heating time (Δt 50°): 260' Maximum Operating Temperature (C°):75 Maximum Operating Pressure (bar): 8 Humidity protection: IPX4 Insulation class: l Profile: M Energy Class: C size: A(700); B(460); C/E:(100-265); F(130); G(350); H(40); l(130); M(240). Warranty: 2 years General characteristics VERTICAL ST Wall mounted thermoelectric storage water heater, 50 litres, vertical installation, with heat exchanger. - Internal coil. - Available with right and left attachments. - Glass-porcelain internal boiler. - Polyurethane foam insulation. - Magnesium anode. - Armored resistance in copper. - Flange. - Double safety thermostat. - External thermometer. - Safety valve. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS WATER HEATER ARISTON NEXT OUTDOOR 16 EU LPG - new ErP model Product code: 3632258 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: XL profile Characteristics of heating/DHW operation: CE certification (pin) 0051CM4090 Category II 2H3P Nominal thermal power kW 28.0 Minimum thermal power kW 5.0 Modulation range 1 : 5.6 Nominal heat input kW 31.0 Min/max temperature selectable 35-70 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow l/min > 2.0 Flow rate (ΔT 25°C) l/min 16.0 Supply voltage (frequency 50 HZ) V 230-50 Maximum absorbed power W 48 Minimum ambient temperature of use °C -20 Electrical protection type IPX5D Dimensions (HxWxD): 563 x 350 x 130 mm Weight: 12.8kg Power supply: LPG Next Outdoor EU The generation of gas water heaters for outdoor use Next Outdoor, the new instantaneous gas water heater for outdoor use. Featuring an exclusive design, small size (only 13cm deep!) and new features. Next outdoor offers maximum temperature stability thanks to the electronic modulation of the gas and the fan, the wide modulation ratio between the maximum and minimum power, and the automatic water flow regulator. With the bathroom function, Next outdoor allows you to have the ideal quantity and temperature for maximum relaxation. Thanks to the introduction of the PROFESSIONAL 20 and 24 l/min models, the Ariston range for the outdoor version is completed, without however renouncing an attractive design and the compactness that distinguishes it on the market. The Next Outdoor, thanks to the remote control, has all the functions at hand and the small size makes it easily adaptable to any type of outdoor environment. Furthermore, thanks to the models of the new PROFESSIONAL range (20 and 24 l/min) it is able to manage up to a maximum of 5 products in cascade. Next Outdoor is the most efficient in its category and can also be integrated with solar systems. Thanks to the kit with thermostatic valve, the NEXT OUTDOOR is set up for integration and management of solar systems. An ecological and clean solution to avoid waste and encourage energy saving. Characteristics: External installation type A3 It does not require a fume exhaust system Standard remote control: with the remote control it is possible to change the temperature from anywhere in the house Electronic ignition (220 v) with ionization flame sensor and consequent gas savings of up to 25% Maximum efficiency > 90% Modulation ratio 1:6 Automatic flow regulator with stepping motor Electronic thermostatic modulation for precise temperature control Minimum activation pressure at 0.1 bar Standard antifreeze function: up to -20° Cascade solution up to 5 products (only with models 20 and 24) Integration with solar thermal via thermostatic valve Small size Absolute safety thanks to the IPX5D electrical protection Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Product name GAS WATER HEATER VAILLANT ATMOMAG MINI 11-0/1 XI METHANE. Open Room WITH NATURAL DRAFT Technical specifications ErP energy class: Class A Nominal heat output: 19.2 kW DHW direct withdrawal range T = 25C: 2.5 - 11 l/min Chamber Open to natural draught Ignition: electronic Compact dimensions (HxWxL): 580/255/310 mm Power supply: METHANE General characteristics AtmoMAG MINI Instantaneous water heaters with electronic battery ignition. AtmoMAG XI are natural draft water heaters with electronic ignition powered by batteries. Saving safety without electric energy aids. The Direct Start system allows for faster ignitions. Ionization flame detection ensures operational safety. The adoption of the OPTI MOD system for flame regulation allows you to adapt the water temperature to the changing seasons with a quick gesture. In the mini version, features and functions remain unchanged and the small dimensions become the motif of choice in some living situations. atmoMAG XI (hot water production) the atmospheric version with DHW flow rate of: 14 litres/minute Natural gas LPG atmoMAG XI mini (hot water production) the atmospheric version with DHW flow rate of: 11 litres/minute Natural gas LPG Compact size Manual range selector Automatic flame modulation LCD display Domestic hot water Power selectable on 10 levels Ionization flame control New hydraulic unit Exchanger with Supral protection ErP and ELD: what they mean and how they differ ErP: The EU has issued new obligations for Energy Using Products (ErP). The new directive, known as the Ecodesign directive, prescribes the minimum efficiency requirements and emission limits for appliances that produce heating and domestic hot water. The Ecodesign directive addresses two categories of relevant products for installers and retailers in the sector: Category 1 includes space heaters; in particular: electrical, gas and diesel appliances such as boilers, heat pumps and cogenerators. Category 2 Includes appliances for the production of domestic hot water: electric, gas, diesel such as water heaters, heat pumps for DHW, solar systems up to 400 kW and boilers up to 2000 litres. ELD : in addition to the ErP directive, the EU has also introduced a mandatory energy labeling for the same type of appliances up to 70 kW and boilers up to 500 litres. The energy labeling directive is called ELD and requires that new products and systems for heating and domestic hot water production are labeled with an indication of their energy efficiency class. By combining products and components, for example by adding a temperature control unit, the energy classification of the system can be increased, which will be calculated by the installer and indicated on the package label. Product warranty For sale on our site they are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

NB: ITEM OUT OF PRODUCTION, IN ITS ABSENCE IT WILL BE REPLACED WITH THE NEXT MODEL THERM 4204 Technical features Product data for energy consumption - according to requirements of EU regulations no. 811/2013 and 812/2013 to complete the directive 2010/30/EU LPG code: T4200 14-2 31 Water heating energy efficiency class B Declared load profile L Open chamber with natural draft Nominal heat output (Pn) [kW] 23.6 Nominal heat input (Qn) [kW] 27 Max water flow with ΔT 25 °C [l/min] 14 Max water flow with ΔT 25 °C [l/min] 7 sound pressure max. [dB(A)] 69 Weight (without packaging) [kg] 14 Dimensions (H x W x D) [mm] 655 x 350 x 228 Junkers Bosch water heaters With Junkers Bosch gas and heat pump water heaters you are assured of the best technology for the production of domestic hot water, always available and perfectly tailored to the user's needs: high quality, maximum efficiency and safety, ease of installation and control savings on bills. What to ask for more? Whatever your choice, choose quality. The wide range of Junkers Bosch gas and heat pump water heaters is able to meet the needs of your customers, to whom you can offer the most suitable solution for their home. Junkers Bosch gas water heaters are available in numerous models, to meet the most diverse needs: from the smallest ones, also suitable for being inserted in kitchen wall units, to those specifically designed for outdoor installation or for large buildings. Today it is possible to satisfy domestic hot water needs also through renewable energy sources: this allows not only economic savings, but also a contribution to environmental protection. Junkers Bosch heat pump water heaters are able to supply all the hot water needed in an efficient, convenient and sustainable way, obtaining energy from the external environment and using it to heat the water. Whatever your customers' requests, with Junkers Bosch you are sure to guarantee the best response. Environmentally friendly efficiency Choosing a gas water heater can also take advantage of renewable energy sources: all gas water heater models can be fully integrated, thanks to the Solar Kit accessory, in new or existing thermal solar systems, for exploit the inexhaustible energy of the sun for the production of domestic hot water. General characteristics THERM 4200 THERM 4200, the instantaneous gas water heater with compact dimensions, which reduces consumption and helps to protect the environment. Advantages ▶ Guarantees maximum safety thanks to a triple system which includes the smoke outlet sensor, the temperature limiter and the flame ionisation control (which interrupts the gas flow in the event of ignition failure or accidental shutdown). ▶ Easily adjusted using the intuitive control panel ▶ It can be connected directly to solar thermal systems for the production of domestic hot water Characteristics ▶Electronic ignition by batteries ▶Continuous flame modulation ▶Works even in case of very low water pressures ▶Extremely compact size The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, in order to be placed on the market, heating and hot water production systems will have to comply with the ErP (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of the appliances, favoring their comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating and domestic hot water production. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding less performing technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent concrete help for the consumer, allowing him to learn more about the characteristics of the system, acquire greater awareness of the energy savings allowed and make the best choice of what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the former is supplied by the manufacturer together with the product for heating and/or domestic hot water production appliances the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing the score attributed to each appliance to increase and increasing the energy class of the system: it is therefore the task of whoever makes/installs the system to supply the consumer the correct explanatory label. The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on home consumption, approximately 80% of which is due to heating and the production of hot water, and are already being incentivized at a tax level today. Junkers Bosch is already in line with the dictates of the ErP legislation, demonstrating the future orientation that has always distinguished the brand. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

General characteristics Brand: Atlantic EAN: 3410538212481 Data sheet Absorbed power (W): 1200 Voltage (V): 230 (220-240) Energy consumption (kWh/24h at 65°C): 0.58 Heating time at 35°C (Δt=20°C): 0h19 Heating time at 60°C (Δt=50°C): 0h47 Dimensions H:399 Ø: 338 A: 163 B:163 C:236 Q: 81 E: 345 F: - G: - Inspection flange (Ø-mm): 72 Net weight (Kg): 9 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: Bandini ST 50 Thermal dispersion 65° (KWh/24h): 0.98 Electric Power: 1200W Voltage (V): 230 Heating time (Δt 50°): 170' Maximum Operating Temperature (C°):75 Maximum Operating Pressure (bar): 8 Humidity protection: IPX4 Insulation class: l Profile: M Energy Class: C Dimensions: A(510); B(460); C/E:(100-175); F(130); G(250); H(20); l(130); M(240). Warranty: 2 years General characteristics VERTICAL ST Wall mounted thermoelectric storage water heater, 50 litres, vertical installation, with heat exchanger. - Internal coil. - Available with right and left attachments. - Glass-porcelain internal boiler. - Polyurethane foam insulation. - Magnesium anode. - Armored resistance in copper. - Flange. - Double safety thermostat. - External thermometer. - Safety valve. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

General characteristics Brand: Atlantic EAN: 3410538540195 Capacity: 80L Model: COMBI MG LT 80 Category: Vertical Model: 854019 Data sheet Capacity (L): 80 Voltage (V): 230 (220-240) Energy consumption (KWh/24h): 1.63 Maximum use temperature: 90°C Working pressure (bar): 8 Coil internal volume (l): 2.7 Coil surface (m3): 0.35 Pressure drop at 2m3/h (mm bar): 20 Pressure drop at 1m3/h (mm bar): <15 Test pressure (bar): 6 Max working pressure of the coil (bar): 12 Heating time ΔT 20°C secondary 45°C: 1h18 Heating time ΔT 50°C secondary 45°C: 3h14 Primary power (Kw) at 90°C with 2m3/h secondary at 45°C: 17.5 Primary power (Kw) at 80°C with 1m3/h secondary at 45°C: 12 Continuous speech (l/h) primary at 90°C with secondary 2m3/h at 45°C: 431 Flow rate in the first 10 min. (l) primary 90°C 2m3 secondary 45°C: 93 Warm-up time Primary 90°C with 2m3/h (ΔT=30°C): 9 Primary 90°C with 2m3/h (ΔT=50°C): 20 Primary 80°C with 1m3/h (ΔT=30°C): 14 Primary 80°C with 1m3/h (ΔT=50°C): 34 Electricity consumption (W): 190 Dimensions A: 791 B: 590 C:251 Q: 457 E: 165 F: 451 Ø: 433 Net weight (Kg): 22 Load profile: L Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: ITEM OUT OF PRODUCTION, IN ITS ABSENCE IT WILL BE REPLACED WITH THE NEXT MODEL THERM 4204 Technical features Product data for energy consumption - according to requirements of EU regulations no. 811/2013 and 812/2013 to complete the directive 2010/30/EU CNG code: T4200 11-2 23 LPG code: T4200 11-2 31 Water heating energy efficiency class A Declared load profile M Open chamber with natural draft Nominal heat output (Pn) [kW] 19.2 Nominal heat input (Qn) [kW] 21.8 Max water flow with ΔT 25 °C [l/min] 11 Max water flow with ΔT 25 °C [l/min] 5.5 sound pressure max. [dB(A)] 69 Weight (without packaging) [kg] 11.7 Dimensions (H x W x D) [mm] 580 x 310 x 228 Junkers Bosch water heaters With Junkers Bosch gas and heat pump water heaters you are assured of the best technology for the production of domestic hot water, always available and perfectly tailored to the user's needs: high quality, maximum efficiency and safety, ease of installation and control savings on bills. What to ask for more? Whatever your choice, choose quality. The wide range of Junkers Bosch gas and heat pump water heaters is able to meet the needs of your customers, to whom you can offer the most suitable solution for their home. Junkers Bosch gas water heaters are available in numerous models, to meet the most diverse needs: from the smallest ones, also suitable for being inserted in kitchen wall units, to those specifically designed for outdoor installation or for large buildings. Today it is possible to satisfy domestic hot water needs also through renewable energy sources: this allows not only economic savings, but also a contribution to environmental protection. Junkers Bosch heat pump water heaters are able to supply all the hot water needed in an efficient, convenient and sustainable way, obtaining energy from the external environment and using it to heat the water. Whatever your customers' requests, with Junkers Bosch you are sure to guarantee the best response. Environmentally friendly efficiency Choosing a gas water heater can also take advantage of renewable energy sources: all gas water heater models can be fully integrated, thanks to the Solar Kit accessory, in new or existing thermal solar systems, for exploit the inexhaustible energy of the sun for the production of domestic hot water. General characteristics THERM 4200 THERM 4200, the instantaneous gas water heater with compact dimensions, which reduces consumption and helps to protect the environment. Advantages ▶ Guarantees maximum safety thanks to a triple system which includes the smoke outlet sensor, the temperature limiter and the flame ionization control (which interrupts the gas flow in the event of ignition failure or accidental shutdown). ▶ Easily adjusted using the intuitive control panel ▶ It can be connected directly to solar thermal systems for the production of domestic hot water Characteristics ▶Electronic ignition by batteries ▶Continuous flame modulation ▶Works even in case of very low water pressures ▶Extremely compact size The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, in order to be placed on the market, heating and hot water production systems will have to comply with the ErP (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of the appliances, favoring their comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating and domestic hot water production. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding less performing technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent concrete help for the consumer, allowing him to learn more about the characteristics of the system, acquire greater awareness of the energy savings allowed and make the best choice of what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the former is supplied by the manufacturer together with the product for heating and/or domestic hot water production appliances the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing the score attributed to each appliance to increase and increasing the energy class of the system: it is therefore the task of whoever makes/installs the system to supply the consumer the correct explanatory label. The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on home consumption, approximately 80% of which is due to heating and the production of hot water, and are already being incentivized at a tax level today. Junkers Bosch is already in line with the dictates of the ErP legislation, demonstrating the future orientation that has always distinguished the brand. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

JUNKERS HYDROCOMPACT OUTDOOR 15 LT mod. WTD 15 AM EW Methane Technical features Product data for energy consumption - according to requirements of EU regulations no. 811/2013 and 812/2013 to complete the directive 2010/30/EU CNG code: T4600 SO 15-23 LPG code: T4600 SO 15-31 Water heating energy efficiency class A Declared load profile XL External installation Remote control standard standard Forced draught sealed chamber Nominal heat output (Pn) [kW] 25.4 Nominal heat input (Qn) [kW] 27.5 Power setting/modulation range (Pn,min. - Pn,max.) [kW] 3.8-25.4 Flow rate of water supplied with ΔT 25 °C [l/min] 15 Flow rate of water supplied with ΔT 35 °C [l/min] 10 Efficiency at 100% of rated power [%] 92 sound pressure max. [dB(A)] 73 Power supply [V(AC)] 230 Maximum absorbed power [W] 228 Degree of electrical protection [IP] IPX5D Weight (without packaging) [kg] 11 Dimensions (H x W x D) [mm] 568 x 300 x 170 General characteristics Junkers Bosch water heaters With Junkers Bosch gas and heat pump water heaters you are assured of the best technology for the production of domestic hot water, always available and perfectly tailored to the user's needs: high quality, maximum efficiency and safety, ease of installation and control savings on bills. What to ask for more? Whatever your choice, choose quality. The wide range of Junkers Bosch gas and heat pump water heaters is able to meet the needs of your customers, to whom you can offer the most suitable solution for their home. Junkers Bosch gas water heaters are available in numerous models, to meet the most diverse needs: from the smallest ones, also suitable for being inserted in kitchen wall units, to those specifically designed for outdoor installation or for large buildings. Today it is possible to satisfy domestic hot water needs also through renewable energy sources: this allows not only economic savings, but also a contribution to environmental protection. Junkers Bosch heat pump water heaters are able to supply all the hot water needed in an efficient, convenient and sustainable way, obtaining energy from the external environment and using it to heat the water. Whatever your customers' requests, with Junkers Bosch you are sure to guarantee the best response. Environmentally friendly efficiency Choosing a gas water heater can also take advantage of renewable energy sources: all gas water heater models can be fully integrated, thanks to the Solar Kit accessory, in new or existing thermal solar systems, for exploit the inexhaustible energy of the sun for the production of domestic hot water. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase .

Read more less

Open chamber gas water heater SIME Mini 12 OF cod. 8112620 Methane Nominal thermal power kW 20.4 Nominal heat input kW 24.0 Sanitary flow rate ∆t 25°C l/min 12 DHW energy efficiency class A ACS size M Max/min water pressure bar 10/0.3 IP electrical protection degree IPX0 Dimensions HxWxD mm 636x350x223 Sime Mini Of The Mini 12 OF ErP series is characterized by its compact dimensions which allow it to be housed even in small spaces, thus representing the ideal installation solution for modern living contexts. It is equipped with automatic ignition and battery power which allows installation without electrical connections. A selector adjusts the water temperature according to the flow rate and a flame sensor interrupts operation if the flame suddenly goes out. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Energy label specifications according to the European ErP directive   Sanitary Energy Efficiency : Class A Load profile: L Exercise features: Open chamber with natural draft Ignition - 1.5 battery Flame control - by ionization Nominal heat output: 24 kW Hot water production Δ T=25°C: 14 l/min Min/max pressure bar 0.3/10 Ø water and gas connections - 1/2” Dimensions (HxLxP): mm 620x380x224; 11.5 kgs The guarantee is the Official Beretta Italia one, and has a duration of 24 months Power supply: METHANE General characteristics SOURCE 2 DGT Fonte 2 DGT, hot water in compact dimensions From Beretta's experience and technological research comes the new line of Fonte 2 DGT water heaters, designed to offer maximum sanitary comfort, maximum energy savings and greater simplicity of use. Thanks to its extremely compact dimensions, Fonte 2 DGT can also be placed in limited spaces and therefore represents the ideal solution to meet the installation needs of modern living contexts. The range, open ionization chamber with battery ignition, two water filters as standard and with codes for both methane and LPG, is made up of the Fonte 2 DGT versions with 11 and 14 litres/min models and Fonte 2 DGT FLEX with a from 11 litres/min. The FLEX versions also include the hoses and the sanitary tap. Source 2 DGT: high energy class and low consumption The Fonte 2 DGT line of water heaters is equipped with the special device known as the Economizer, specifically designed to combine maximum user comfort with significant energy and cost savings. The activation of the Economiser in fact allows to reduce the gas consumption up to over 50%, limiting the maximum thermal power supplied, when the usage requirements are contained (low temperature difference or reduced sampling flow rates, such as for example during summertime). Furthermore, on all Fonte 2 DGT models, the Economizer can be adjusted progressively by the user, according to needs, achieving maximum savings in the low flame position. Finally, the appliances in the Fonte 2 DGT range are equipped with flame modulation which, by adapting gas consumption to individual withdrawal requests, allows the temperature of the water supplied to be kept almost constant, compatibly with the settings made and the power of the water heater. The Beretta Fonte 2 DGT water heater guarantees always very low gas consumption and respect for the environment. Beretta Fonte 2 DGT complies with the current ERP regulation placing itself in CLASS A for energy consumption. Functionality and ease of use The Fonte 2 DGT water heaters, with a linear and essential design, have an ergonomic dashboard which houses two knobs which allow you to manage all the functions of the appliance in a simple and intuitive way and a display which shows the temperature of the domestic hot water produced. The left knob, in addition to the on/off functions, activates the "Gas economizer" device, which can be adjusted between the small flame and the large flame, allowing the user to make interesting gas savings. The right knob allows you to set the temperature of the water supplied, by regulating the quantity of water at the outlet Characteristics: Instantaneous open chamber water heater with Natural Gas and LPG versions Abundant production of domestic hot water: 11 or 14 litres/min Digital display with indication of domestic hot water temperature Battery ignition and ionisation flame presence control Gas economizer with 8 regulation steps Modulating flame regulation system Simple and intuitive control panel Compact size and simple installation without removing the shell Assembly template supplied (gasket and hose holder for LPG versions) New easy access water connections on the same horizontal axis New latest generation water/gas group with integrated gas pressure regulator Double inlet water filter Safety microswitch to protect the batteries (2 x 1.5 Volt type D) in the OFF position Temperature selector FLEX versions with flexible fittings and standard tap Beretta is “ERP”. The concrete commitment towards an eco-sustainable future The acronym ErP, acronym of "Energy related Products" (Products connected to the use of energy), identifies the Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015 , the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations simultaneously issued for the energy labeling of products will also become effective in addition to the corresponding Directive 2010/30/EU. The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class * . Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands. In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual appliances. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less