Get personalized comfort with wall mounted Fan Coils. Elegant design, efficient performance and precise temperature control. Choose from our selection of wall mounted Fan Coils for efficient and quiet heating and cooling.
Wall-mounted Fan Coil Fan Coils
Ferroli Fan Coil Fan Coil Ferroli Top Fan Plus Mod VM-B 50 + Free CM-F Switch
Technical features Model : VM-B 50 Number of fans : 2 CM-F switch included Performance Power supply (V,Hz, Ø) : 220~240/50/1 Cooling power : 2390 ~ 3400W Heating power : 4930 ~ 7800W Dehumidification: 1150g/h Air flow : 350 ~ 615 m3/h Sound power : 36 ~ 51 db(A) Sound pressure : 27 ~ 42 db(A) Installation data Main battery connections: 3/4" Additional battery connections: 1/2 " Main battery water content: 1.88 litres Additional battery water content: 0.50 litres Dimensions and weight Dimensions (HxWxD): 554+100x1190x 220mm Weight : 27.0kg Ferroli TOP FAN PLUS fan coil Consisting of a fan, a heat exchange element and a filter, fan coil units are ideal machines for summer air conditioning and winter heating of the house and any room. Fed with chilled water from a cooler, they make the air in the room fresh, dry and clean in a very short time and with great energy efficiency; fed with hot water from a heat pump or boiler, they provide clean and economical heat during the winter season. Series with centrifugal fan, available in 9 sizes and three versions: VM-B with casing for vertical and horizontal installation and suction from below VM-F with casing for vertical and horizontal installation and front suction VN without casing for vertical and horizontal installation Characteristics Cover cabinet obtained by integrating parts in plastic material and parts in galvanized sheet metal, oven painted with epoxy powders Supporting structure in galvanized steel Finned pack heat exchange coil with aluminum fins and copper pipes, brass manifolds specially designed to guarantee low pressure drops Air filter easy to remove and clean, regenerable by washing or blowing Fan unit with three-speed motor and aluminum impellers Wide range of controls both to be installed on the machine and remote on the wall New version with infrared remote control Switch It has a selector for the Summer / Off / Winter function, while the second selects the Min / Med / Max fan speed. Available in two different versions: - for installation on CM-F cabinet - for CMR-F remote installation Two series of panels are available for this type of installation: ON THE MACHINE for installation of the fan coil on the floor (models VM-B, VM-F), REMOTE ON THE WALL for installation of the fan coil on the ceiling (models VM-B, VM- F) or false ceiling (model VN). Each of the series includes three types of control, switch, basic thermostat and advanced thermostat. Novelty Remote control Optional Infrared remote control, for all sizes and versions, with liquid crystal display complete with support bracket for wall mounting, which allows the following functions: Power on Power off Operating modes (Hot/Cool/AutoChange Over/Ventilation only - presence of valves required-) Fan speed (Max/Med/Min/Auto) Set point temperature Timer setting °C or °F temperature scale setting Visible receiver Located on the front panel of the unit, it is complete with Timer led (yellow), operating led (green) and emergency ON/OFF button and reception area. The system completes with the card inside the unit. The system is supplied already installed and tested in the company. Recessed wall receiver The receiver is supplied in the case of recessed units and is positioned visible on the false ceiling. It is complete with a yellow Timer led, a green operating led and an emergency ON/OFF and reception area button. It is supplied with a multipolar cable of a maximum length of 0.8 metres, for quick connection and with the electronic card to be installed on the unit. It can be removed from the machine; the testing of the system takes place in the company while the positioning of the receiver is the responsibility of the installer. Product Guarantee : All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€215,00€182,00
-
Riello Riello Design Inverter Fan Coil Fan Coil 21 B With Brushless Motor With Control Panel On Board
Riello Design Inverter 21 b Fan Coil Fan Coil with brushless motor and on-board control panel Tangential fan coil with Brushless Inverter motor Vertical or horizontal installation (accessory) Dimensions HxWxD mm 580x960x130 Code 20116244 General characteristics Cooling capacity 7°C-12°C 2120 Thermal output 50°CW (2) 2775 Thermal efficiency 70°C-60°CW (3) 4670 Maximum air flow m3 /h (4) 389 Sound pressure dBA 43.1-25.3 Inverter design The INVERTER DESIGNS are Riello fan coils with DC Brushless Inverter motors. This technological solution allows for continuous variation from 0 to 100% of the air flow rate and consequently of the heating and cooling capacity. The INVERTER DESIGNS heat and cool any environment very quickly, it is possible to choose between two dedicated mappings: PERFORMANCE for commercial environments, which require high efficiency and great efficiency, and COMFORT to always maintain maximum silence in residential environments. Thanks to the use of DC Brushless motors, the DESIGN INVERTERS save up to 50% of electricity compared to fan coils with traditional motors (ON/OFF type). Like the whole HELIOTERM family, the DESIGN INVERTER range is characterized by an extremely slim aesthetic with a depth of only 13 cm. The range is available in 5 models in two colors (white and metallic grey), with cooling powers from 830 W up to 4560 W and hot powers from 1090 W up to 4860 W. The wide range of accessories and controls with a touch DISPLAY , support a wide range of applications. All versions can be installed vertically or horizontally (using a dedicated accessory), with connections on the left. The structure is made of galvanized sheet metal with sides in ABS in the white version, in silver sheet metal, the front delivery grille is in aluminium. - Ultra Slim aesthetics - Depth of 13cm - Two colors available - Units that can be installed both vertically and horizontally - Easy to install with connections on the left - Ease of disassembly and cleaning of the filters - Commands with Display Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€395,00
-
IdealClima Ideal Clima Wall Fan Coil Idrosplit Series Falko Hi-Wall 700 Hw Thm07a With Control Included
Technical features Model : T FALKO HI-WALL 700 HW Code : THM07A Performance: Cooling Power: 3330 W Heating power: 4230 W Air Flow : 680 m 3 /h Water Flow : 9,7 ~ 12 l/min Sound Pressure Level : 37 ~ 43 dB(A) Characteristics: Power supply (V,Hz, Ø) : 220~240/50/1 Electric Consumption : 46 W Maximum Current : 0.25A Maximum pressure : 1.6MPa Installation data: Pipe diameter : 12.70 mm RC (1/2") Dimensions and weight: Internal Unit Dimensions (LxHxP): 850x300x198 mm Empty weight : 13 Kg IdealClima hydronic terminals FALKO Comfosplit Hydronic with Hydrosilence Technology. Silent and Advanced Solutions Falko HW is the hydronic terminal which, in compact dimensions and captivating aesthetics, contains technologies that are ideal for obtaining thermal and acoustic comfort in residential environments. In fact, Falko HW is distinguished by a high-performance heat exchange battery and a fan unit with a three-phase permanent magnet brushless motor controlled with current reconstructed according to a sine wave (the motor is thus called the "ECM" type): comfort and efficiency Elegant and Modern Design The Falko HW design, characterized by a white ABS front panel with elegant chromed details, is designed to integrate into any type of environment. The integrated air outlet is equipped with a motorized deflector. The front panel is complete with a display showing the operating status and the temperature. Supplied as standard, the infrared remote control allows control of the terminal and the setting of "night reduction". The tangential fan is low noise The effectiveness of hydronic rationality Falko HW represents the new generation of fan coils designed with the aim of offering performance and design at the top of its category. Falko HW also means innovation in terms of design, to guarantee absolutely excellent sound performance with the advantage of an exclusive design that goes well with both residential and commercial use. The design covering cabinet has a white color, with front panel, sides, upper grille and side doors made of stabilized ABS Hot and cold only when needed Falko HW guarantees, with its efficiency and quick response, the living comfort standards necessary for modern life, based on a discontinuous presence in homes. With a single appliance, both heating and cooling needs can be satisfied, especially in reversible heat pump systems Falko HW ensures higher quality of the air that is introduced into the environment, well filtered by the standard fine-mesh filter: in fact, it guarantees constant ventilation, which allows for greater cleaning of the air and considerable hygiene in the environments Easy to Install Falko HW can be installed easily, quickly and in any condition. In fact, it matches perfectly with the ordinary gas split predisposition boxes (H.int>10cm). The convenient sheet metal fixing plate also acts as a template for quick installation. The solid hinge that is obtained facilitates connection and allows easy maintenance (e.g. hydraulic system air vent) Semi-transparent display Elegant transparent display of the latest generation, does not interrupt the product lines Infrared receiver Managed with the standard remote control, with ease of installation and operation Elegant Finishes Refined details such as the soft lines and the thin chromed edge make it even more suitable for environments where nothing is left to chance High Power Even in the most thermally demanding situations, Falko is able to deliver all the power needed to guarantee comfort Characteristics Heating, cooling and dehumidifying environments. Emitting power with high efficiency at high as well as low flow temperatures (excellent for heat pump systems). Combine with both traditional boilers, as well as condensing boilers, solar systems and heat pumps Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€303,00
-
SABIANA Ventilconvettore Centrifugo Fan Coil Sabiana CARISMA CRC 43 MV con Motore Elettrico Asincrono 0066004
ATTENZIONE! NON DOTATO DI PIEDINI DI APPOGGIO. Caratteristiche tecniche Modello : CRC 43 MV Codice prodotto : 0066004 Numero di tubi : 2 Accessori Da abbinare obbligatoriamente per il corretto funzionamento, selezionare nel menù a tendina Comando CB a 3 Velocità 9066300 Comando CT-B 3 Velocità + Termostato Elettrico e Commutatore 9066301 Piedini di appoggio : 9066351 Performance Portata aria : 265 ~ 335 ~ 485 m3/h Raffreddamento resa totale : 1,71 ~ 2,11 ~ 2,83 kW Raffreddamento resa sensibile : 1,26 ~ 1,57 ~ 2,15 kW Riscaldamento : 1,74 ~ 2,18~ 2,97 kW Riscaldamento - Acqua 70-60 °C : 3,51 ~ 4,36 ~ 6,00 kW Dp Raffreddamento : 11,2 ~ 16,2 ~ 27,2 kPa Dp Riscaldamento : 9,5 ~ 14,0 ~ 24,3 kPa Alimentazione (V,Hz,Ø) : 220~240/50/1 Livello potenza sonora : 33 ~ 39 ~ 47 dB(A) Livello pressione sonora : 24 ~ 30 ~ 38 dB(A) Dimensioni Dimensioni (AxLxP) : 530x985x225 mm Sabiana Carisma Ventilconvettore centrifugo con motore elettrico asincrono Carisma è il risultato di un grande impegno di energie e risorse, avente l'obiettivo di offrire un prodotto all'avanguardia in termini di design, prestazioni, silenziosità, consumo e funzionalità.Offerto con ventilatore centrifugo o con ventilatore tangenziale, viene proposto in cinque versioni differenti, a parete o soffitto, in vista o ad incasso, con una gamma molto versatile certificata dal Marchio Eurovent.Tutti i modelli hanno gruppi ventilanti con consumi elettrici particolarmente ridotti, sino al 40% in meno della serie precedente, e con la possibilità di poter essere collegati scegliendo tre tra sei differenti velocità di rotazione. Una serie completa di accessori e di comandi di regolazione e controllo, permette di soddisfare qualsiasi esigenza di climatizzazione di ambienti residenziali, alberghi ed uffici. La serie CRC con ventilatore centrifugo si compone di 5 versioni, 9 grandezze, 18 modelli con singola batteria e 27 modelli con doppia batteria, con portate d'aria che variano da 100 a 1500 m3/h, rese termiche da 0,8 a 9 kW, rese frigorifere da 0,6 a 7,6 kW. Mobile di copertura È composto da robuste spalle laterali in materiale sintetico antiurto e da una sezione frontale in lamiera d’acciaio zincata a caldo e preverniciata. La griglia di mandata dell’aria, in materiale sintetico, è di tipo reversibile ad alette fisse ed è posizionata sulla parte superiore. Struttura interna portante In lamiera zincata, spessore 1 mm, composta da due spalle laterali e da una parete posteriore isolate con materassino, spessore 3 mm, in polietilene a cellule chiuse B‐s2‐d0 EN 13501‐1. Filtro Rigenerabile in polipropilene a nido d’ape. Il telaio, in lamiera zincata, è inserito in guide fissate sulla struttura interna che permettono una facile estrazione. Una copertura frontale del filtro, in materiale plastico dello stesso colore della griglia di mandata, evidenzia la presenza dello stesso. Gruppo ventilante Costituito da ventilatori centrifughi a doppia aspirazione, particolarmente silenziosi, con giranti in alluminio o materiale plastico bilanciate staticamente e dinamicamente, direttamente calettate sull’albero motore Motore elettrico Di tipo monofase, a sei velocità di cui tre collegate, montato su supporti elastici antivibranti e con condensatore permanentemente inserito, protezione termica interna a riarmo automatico, grado di protezione IP 20 e classe B. Batteria di scambio termico È costruita con tubi di rame ed alette in alluminio fissate ai tubi con procedimento di mandrinatura meccanica. La batteria principale e l’eventuale batteria addizionale sono dotate di due attacchi Ø 1/2” gas femmina. I collettori sono corredati di sfoghi d’aria e di scarichi d’acqua Ø 1/8” gas. Lo scambiatore non è adatto ad essere utilizzato in atmosfere corrosive o in tutti quegli ambienti in cui si possano generare corrosioni nei confronti dell’alluminio La posizione di serie degli attacchi idraulici è sul lato sinistro guardando l’apparecchio di fronte.Le batterie sono di tipo reversibile: il lato degli attacchi può perciò essere invertito in fase di montaggio in cantiere. Bacinella raccolta condensa In materiale plastico, realizzata a forma di L e fissata alla struttura interna; nella versione MO-MVB ed IV-IO la bacinella è isolata con materassino, spessore 3 mm, in polietilene a cellule chiuse B‐s2‐d0 EN 13501‐1. Il tubo di scarico condensa è Ø 15 esterno. Garanzia prodotto : La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
€274,00 - €349,00
-
Riello Riello Design Inverter Fan Coil Fan Coil 33 B With Brushless Motor With Control Panel On Board
Riello Design Inverter 33 b Fan Coil Fan Coil with brushless motor and on-board control panel Tangential fan coil with Brushless Inverter motor Vertical or horizontal installation (accessory) Dimensions HxWxD mm 580x1160x130 Code 20116246 General characteristics Cooling capacity 7°C-12°C 3310 Thermal output 50°CW (2) 3905 Thermal efficiency 70°C-60°CW (3) 6635 Maximum air flow m3 /h (4) 560 Sound pressure dBA 45.5-25.6 Inverter design The INVERTER DESIGNS are Riello fan coils with DC Brushless Inverter motors. This technological solution allows for continuous variation from 0 to 100% of the air flow rate and consequently of the heating and cooling capacity. The INVERTER DESIGNS heat and cool any environment very quickly, it is possible to choose between two dedicated mappings: PERFORMANCE for commercial environments, which require high efficiency and great efficiency, and COMFORT to always maintain maximum silence in residential environments. Thanks to the use of DC Brushless motors, the DESIGN INVERTERS save up to 50% of electricity compared to fan coils with traditional motors (ON/OFF type). Like the whole HELIOTERM family, the DESIGN INVERTER range is characterized by an extremely slim aesthetic with a depth of only 13 cm. The range is available in 5 models in two colors (white and metallic grey), with cooling powers from 830 W up to 4560 W and hot powers from 1090 W up to 4860 W. The wide range of accessories and controls with a touch DISPLAY , support a wide range of applications. All versions can be installed vertically or horizontally (using a dedicated accessory), with connections on the left. The structure is made of galvanized sheet metal with sides in ABS in the white version, in silver sheet metal, the front delivery grille is in aluminium. - Ultra Slim aesthetics - Depth of 13cm - Two colors available - Units that can be installed both vertically and horizontally - Easy to install with connections on the left - Ease of disassembly and cleaning of the filters - Commands with Display Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€425,00
-
Ferroli Offer - Fan Coil Ferroli Top Fan Plus Mod Vm-B 60 + Commutator Cm-F
COMPLETE WITH CM-F ON/OFF CABINET SWITCH FAN COIL FAN COIL FERROLI TOP FAN PLUS mod. VM-B 60 + free CM-F switch Max-min cooling capacity: 4000-2800W Max-min heat output: 9400-5800W Dehumidification: 1550g/h Max-min air flow: 750-410 m3/h No. of fans: 2 Max-min sound power: 55-38 db(A) Max-min sound pressure: 46-29 db(A) 3R main battery connections: 3/4" 1R extra battery connections: 1/2 " Water content batt.3R: 1.88 l Water content batt.1R: 0.50 l Power supply: 230-1-50 [VF-Hz] Dimensions (HxWxD): 554+100 x 1190 x 220 mm; 27kg Notes : Heating: temp. Ambient air: 20°C; temp. Inlet water: 70°C, Δt water 10°C at maximum fan speed; for medium and minimum fan speed, water flow rate as in maximum speed. Cooling: temp. Room Air: 27°C DB 19°C WBtemp. Inlet water: 7°C, Δt water 5°C at maximum fan speed; for medium and minimum fan speed, water flow rate as in maximum speed. TOP FAN PLUS Consisting of a fan, a heat exchange element and a filter, fan coil units are ideal machines for summer air conditioning and winter heating of the house and any room. Fed with chilled water from a cooler, they make the air in the room fresh, dry and clean in a very short time and with great energy efficiency; fed with hot water from a heat pump or boiler, they provide clean and economical heat during the winter season. Series with centrifugal fan, available in 9 sizes and three versions: VM-B with casing for vertical and horizontal installation and suction from below VM-F with casing for vertical and horizontal installation and front suction VN without casing for vertical and horizontal installation Characteristics: Cover cabinet obtained by integrating parts in plastic material and parts in galvanized sheet metal, oven painted with epoxy powders Supporting structure in galvanized steel Finned pack heat exchange coil with aluminum fins and copper pipes, brass manifolds specially designed to guarantee low pressure drops Air filter easy to remove and clean, regenerable by washing or blowing Fan unit with three-speed motor and aluminum impellers Wide range of controls both to be installed on the machine and remote on the wall SWITCH: It has a selector for the Summer / Off / Winter function, while the second selects the Min / Med / Max fan speed. Available in two different versions: - for installation on CM-F cabinet - for CMR-F remote installation Two series of panels are available for this type of installation: ON THE MACHINE for installation of the fan coil on the floor (models VM-B, VM-F), REMOTE ON THE WALL for installation of the fan coil on the ceiling (models VM-B, VM- F) or false ceiling (model VN). Each of the series includes three types of control, switch, basic thermostat and advanced thermostat. NEW (OPTIONAL) REMOTE CONTROL Infrared remote control (for all sizes and versions) with liquid crystal display complete with support bracket for wall mounting, which allows the following functions: Switching on\Switching off Operating modes (Hot/Cool/AutoChange Over/Ventilation only - presence of valves required-) Fan speed (Max/Med/Min/Auto) Set point temperature Timer setting °C or °F temperature scale setting VISIBLE RECEIVER Located on the front panel of the unit, it is complete with Timer led (yellow), operating led (green) and emergency ON/OFF and reception zone key. The system completes with the card inside the unit. The system is supplied already installed and tested in the company. WALL-MOUNTED RECEIVER (FLUSH MOUNTING) The receiver is supplied in the case of recessed units and is positioned visible on the false ceiling. It is complete with Timer led (yellow), operating led (green) and button for emergency ON/OFF and reception area. It is supplied with a multipolar cable (max length 0.8 metres) for rapid connection and with the electronic board to be installed on the unit. It can be removed from the machine; the testing of the system takes place in the company while the positioning of the receiver is the responsibility of the installer. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€266,00€210,00
-
Ferroli Offer - Fan Coil Ferroli Top Fan Plus Mod Vm-B 80 + Commutator Cm-F
COMPLETE WITH CM-F ON/OFF CABINET SWITCH FAN COIL FAN COIL FERROLI TOP FAN PLUS mod. VM-B 80 + free CM-F switch Max-min cooling capacity: 4900-3600 W Max-min heat output: 12500-8300W Dehumidification: 1600g/h Max-min air flow: 1050-570 m3/h No. of fans: 2 Max-min sound power: 62-48 db(A) Max-min sound pressure: 53-39 db(A) 3R main battery connections: 3/4" 1R extra battery connections: 1/2 " Water content batt.3R: 1.88 l Water content batt.1R: 0.50 l Power supply: 230-1-50 [VF-Hz] Dimensions (HxWxD): 554+100 x 1190 x 220 mm; 27kg Notes : Heating: temp. Ambient air: 20°C; temp. Inlet water: 70°C, Δt water 10°C at maximum fan speed; for medium and minimum fan speed, water flow rate as in maximum speed. Cooling: temp. Room Air: 27°C DB 19°C WBtemp. Inlet water: 7°C, Δt water 5°C at maximum fan speed; for medium and minimum fan speed, water flow rate as in maximum speed. TOP FAN PLUS Consisting of a fan, a heat exchange element and a filter, fan coil units are ideal machines for summer air conditioning and winter heating of the house and any room. Fed with chilled water from a cooler, they make the air in the room fresh, dry and clean in a very short time and with great energy efficiency; fed with hot water from a heat pump or boiler, they provide clean and economical heat during the winter season. Series with centrifugal fan, available in 9 sizes and three versions: VM-B with casing for vertical and horizontal installation and suction from below VM-F with casing for vertical and horizontal installation and front suction VN without casing for vertical and horizontal installation Characteristics: Cover cabinet obtained by integrating parts in plastic material and parts in galvanized sheet metal, oven painted with epoxy powders Supporting structure in galvanized steel Finned pack heat exchange coil with aluminum fins and copper pipes, brass manifolds specially designed to guarantee low pressure drops Air filter easy to remove and clean, regenerable by washing or blowing Fan unit with three-speed motor and aluminum impellers Wide range of controls both to be installed on the machine and remote on the wall SWITCH: It has a selector for the Summer / Off / Winter function, while the second selects the Min / Med / Max fan speed. Available in two different versions: - for installation on CM-F cabinet - for CMR-F remote installation Two series of panels are available for this type of installation: ON THE MACHINE for installation of the fan coil on the floor (models VM-B, VM-F), REMOTE ON THE WALL for installation of the fan coil on the ceiling (models VM-B, VM- F) or false ceiling (model VN). Each of the series includes three types of control, switch, basic thermostat and advanced thermostat. NEW (OPTIONAL) REMOTE CONTROL Infrared remote control (for all sizes and versions) with liquid crystal display complete with support bracket for wall mounting, which allows the following functions: Switching on\Switching off Operating modes (Hot/Cool/AutoChange Over/Ventilation only - presence of valves required-) Fan speed (Max/Med/Min/Auto) Set point temperature Timer setting °C or °F temperature scale setting VISIBLE RECEIVER Located on the front panel of the unit, it is complete with Timer led (yellow), operating led (green) and emergency ON/OFF and reception zone key. The system completes with the card inside the unit. The system is supplied already installed and tested in the company. WALL-MOUNTED RECEIVER (FLUSH MOUNTING) The receiver is supplied in the case of recessed units and is positioned visible on the false ceiling. It is complete with Timer led (yellow), operating led (green) and button for emergency ON/OFF and reception area. It is supplied with a multipolar cable (max length 0.8 metres) for rapid connection and with the electronic board to be installed on the unit. It can be removed from the machine; the testing of the system takes place in the company while the positioning of the receiver is the responsibility of the installer. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€270,00€220,00
-
SABIANA Ventilconvettore Centrifugo Fan Coil Sabiana CARISMA CRC 63 MV con Motore Elettrico Asincrono 0066006
ATTENZIONE! NON DOTATO DI PIEDINI DI APPOGGIO. Caratteristiche tecniche Modello : CRC 63 MV Codice prodotto : 0066006 Numero di tubi : 2 Accessori Da abbinare obbligatoriamente per il corretto funzionamento, selezionare nel menù a tendina Comando CB a 3 Velocità 9066300 Comando CT-B 3 Velocità + Termostato Elettrico e Commutatore 9066301 Piedini di appoggio : 9066351 Performance Portata aria : 415 ~ 590 ~ 760 m3/h Raffreddamento resa totale : 2,50 ~ 3,32 ~ 4,01 kW Raffreddamento resa sensibile : 1,87 ~ 2,54 ~ 3,12 kW Riscaldamento : 2,56 ~ 3,45 ~ 4,26 kW Riscaldamento - Acqua 70-60 °C : 5,17 ~ 6,96 ~ 8,61 kW Dp Raffreddamento : 8,6 ~ 14,1 ~ 19,8 kPa Dp Riscaldamento : 7,3 ~ 12,3 ~ 17,8 kPa Alimentazione (V,Hz,Ø) : 220~240/50/1 Livello potenza sonora : 37 ~ 46 ~ 52 dB(A) Livello pressione sonora : 28 ~ 37 ~ 43 dB(A) Dimensioni Dimensioni (AxLxP) : 530x1200x225 mm Sabiana Carisma Ventilconvettore centrifugo con motore elettrico asincrono Carisma è il risultato di un grande impegno di energie e risorse, avente l'obiettivo di offrire un prodotto all'avanguardia in termini di design, prestazioni, silenziosità, consumo e funzionalità.Offerto con ventilatore centrifugo o con ventilatore tangenziale, viene proposto in cinque versioni differenti, a parete o soffitto, in vista o ad incasso, con una gamma molto versatile certificata dal Marchio Eurovent.Tutti i modelli hanno gruppi ventilanti con consumi elettrici particolarmente ridotti, sino al 40% in meno della serie precedente, e con la possibilità di poter essere collegati scegliendo tre tra sei differenti velocità di rotazione. Una serie completa di accessori e di comandi di regolazione e controllo, permette di soddisfare qualsiasi esigenza di climatizzazione di ambienti residenziali, alberghi ed uffici. La serie CRC con ventilatore centrifugo si compone di 5 versioni, 9 grandezze, 18 modelli con singola batteria e 27 modelli con doppia batteria, con portate d'aria che variano da 100 a 1500 m3/h, rese termiche da 0,8 a 9 kW, rese frigorifere da 0,6 a 7,6 kW. Mobile di copertura È composto da robuste spalle laterali in materiale sintetico antiurto e da una sezione frontale in lamiera d’acciaio zincata a caldo e preverniciata. La griglia di mandata dell’aria, in materiale sintetico, è di tipo reversibile ad alette fisse ed è posizionata sulla parte superiore. Struttura interna portante In lamiera zincata, spessore 1 mm, composta da due spalle laterali e da una parete posteriore isolate con materassino, spessore 3 mm, in polietilene a cellule chiuse B‐s2‐d0 EN 13501‐1. Filtro Rigenerabile in polipropilene a nido d’ape. Il telaio, in lamiera zincata, è inserito in guide fissate sulla struttura interna che permettono una facile estrazione. Una copertura frontale del filtro, in materiale plastico dello stesso colore della griglia di mandata, evidenzia la presenza dello stesso. Gruppo ventilante Costituito da ventilatori centrifughi a doppia aspirazione, particolarmente silenziosi, con giranti in alluminio o materiale plastico bilanciate staticamente e dinamicamente, direttamente calettate sull’albero motore Motore elettrico Di tipo monofase, a sei velocità di cui tre collegate, montato su supporti elastici antivibranti e con condensatore permanentemente inserito, protezione termica interna a riarmo automatico, grado di protezione IP 20 e classe B. Batteria di scambio termico È costruita con tubi di rame ed alette in alluminio fissate ai tubi con procedimento di mandrinatura meccanica. La batteria principale e l’eventuale batteria addizionale sono dotate di due attacchi Ø 1/2” gas femmina. I collettori sono corredati di sfoghi d’aria e di scarichi d’acqua Ø 1/8” gas. Lo scambiatore non è adatto ad essere utilizzato in atmosfere corrosive o in tutti quegli ambienti in cui si possano generare corrosioni nei confronti dell’alluminio La posizione di serie degli attacchi idraulici è sul lato sinistro guardando l’apparecchio di fronte.Le batterie sono di tipo reversibile: il lato degli attacchi può perciò essere invertito in fase di montaggio in cantiere. Bacinella raccolta condensa In materiale plastico, realizzata a forma di L e fissata alla struttura interna; nella versione MO-MVB ed IV-IO la bacinella è isolata con materassino, spessore 3 mm, in polietilene a cellule chiuse B‐s2‐d0 EN 13501‐1. Il tubo di scarico condensa è Ø 15 esterno. Garanzia prodotto : La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
€314,00 - €389,00
-
Aermec Offer Floor Fan Coil Aermec Heating Only Fcx82as From 13.35 Kw Without Control Panel Compatible With Vmf System
ATTENTION ! The support feet are to be purchased separately. OFFER Floor-standing Aermec fan coil for heating only FCX82AS 13.5 kW without control panel. *Compatible with VMF System Technical features Model : FCX82AS Installation : on the floor Compatible with the Vmf system Performance Thermal power at 70°C: 13.35 kW Water flow rate : 1171 l/h Load losses : 16 kPa Thermal power at 50°C: 6.86 kW Water flow rate : 860 l/h Load losses : 12 kPa Thermal power at 45°C: 6.64 kW Water flow rate : 1152 l/h Load losses : 16 kPa Air flow rate : 700 ~ 920 m 3 /h Sound power level : 51 ~ 62 dB(A) Sound pressure level : 43 ~ 54 dB(A) Electrical data Power supply (V,Hz, Ø): 230V~50Hz Power Consumption: 52~106W Absorbed current : 0.49 kW Installation data Standard Coil Fitting Diameter : (3/4") Additional coil fittings diameter : (1/2") Dimensions and weight Dimensions without feet (HxWxD): 688x1320x220 mm Weight : 34.0 Kg General characteristics: Aermec FCX-A Efficient, silent and reliable fan coils Aermec fan coils: a combination where the company and the brand identify the products and vice versa. In this air conditioning sector Aermec is synonymous with a leader: a primary company in Italy and at the top in Europe. A position that comes from many years of experience and which has been consolidated year after year. Wide range The range consists of 16 sizes for various versions, which allow for extreme installation versatility. The complete line of accessories satisfies any customization need. All the units have been designed taking advantage of Aermec's many years of experience, acquired through daily contact with operators in the sector. Aermec fan coils are in fact designed to make their insertion into the impact and their installation as easy as possible. Furthermore, their reliability is constant, guaranteed by Aermec's many years of experience. Efficient heating Unlike other types of radiators, the low operating inertia means that the fan coils react immediately to variations in air temperature. This produces constant room temperature as conditions vary and significant energy savings, because it avoids releasing heat into the room when it is not needed. At the same time, a stepless control of the feed water temperature prevents annoying cold drafts in the winter Maximum silence FCX respects the finest hearing because it works with silence at the top of its category: no clicking or clicking of mechanical organs. Attention to health and air quality The only one of its kind, the Aermec convector, in version A, is now available with the Plasmacluster device, an exclusive system that eliminates bacteria, viruses, moulds, mites, pollen and dust. The Plasmacluster purifier restores the correct balance between positive and negative ions in closed environments, refreshes the air and guarantees an ideal condition for a healthy life. Asthma, dermatitis and other respiratory problems are often caused by pollution, dust mites, pollen and pet dander. Plasmacluter guarantees perfect sanitation of the air in closed environments, thus constituting a valid aid against the spread of allergens. FCX maintenance is reduced to periodic cleaning of the air filter, which can be done by easily removing the filter and washing it in running water. Speed and savings The FCX fan coil quickly brings the perfect temperature and healthier, cleaner air at the right humidity level, both in summer and winter. Constant control of the temperature in the room is ensured by the ambient probe positioned on the cover cabinet. This allows you to adjust the temperature room by room, realizing high energy savings. Safety Full compliance with accident prevention regulations: the CE mark, the absence of sharp edges, no moving parts that can be reached by accident, the electrical connections in double insulation, the impossibility for the external parts to reach dangerous temperatures, make the operation of the fan coils Aermec absolutely safe in any type of environment, both residential and industrial. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€299,00€239,00
-
OLIMPIA SPLENDID Fan Coil Fan Coil Olimpia Splendid Inverter Model Bi2 Sl Air 400 With Tr Control Included Code 01852
Technical features Product code 01852 Total cooling output (a) (E) kW 1.74 Water flow rate (a) l/h 302 Battery water content l 0.8 Maximum working pressure 10 bar Eurocone 3/4 inch hydraulic connections Max absorbed power (E) W 19 Sound power min-max 39/53 dB(A) Sound pressure (f) dB(A) 36 Power supply V/ph/Hz 230/1/50 Dimensions WxHxD 895x599x129mm SL Air inverter accessories TR (Touch Remote) control included Wall-mounted LCD programmable thermostat B0736 control for MODBUS, RS485 connection - optional Possibility of controlling up to 30 units. Desired temperature selection, operating mode, fan speed, manual/chronothermostat mode. Ambient probe inserted in the command. Backlit LCD display. Bi2 SL AIR Bi2® Air is the system terminal that heats, cools, dehumidifies and filters. Thanks to its integral design, just 12.9 cm thick, installing and maintaining the machine has never been easier! With the innovative integrated multiset control you also have maximum comfort always at hand. INTEGRAL DESIGN® Thanks to the essential design and the front body combined with the lateral sides, the installation and maintenance of Bi2 Air are simplified MULTISET CONTROL Integrated multiset electronics for touch use on board the machine or for universal dialogue with remote controls and home automation Characteristics: Heat, Cool, Dehumidify and Filter Integral aesthetics with suction from the lower side Front in metal, sides in ABS Compact: Thickness min 12.9 cm max 15 cm Range made up of 5 power models DC brushless motor Monobloc body for working in comfort Motorized steel air delivery flap Anti-intrusion grilles on the air intake and outlet Removable filters located on the air intake Remote control supplied TR CONTROL (Touch Remote): Touch control on the machine and remote control supplied. Through a selection of keys on the machine, it is possible to remote control* with wall remote control (chronothermostat code B0736, optional) or with home automation, through the Modbus RS485 signal protocol Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€435,00
-
Aermec Aermec Fan Coil Fan Coil Mod. Omnia Ul 36c Electronic Control Included
FAN COIL FAN COIL AERMEC mod. OMNIA UL 36c with electronic control included UL listed fan coil units for both horizontal and vertical installation UL-C : version with electronic thermostat and cabinet Model: OMNIA UL 36 C Cooling capacity: 2.8 - 1.6 kW Thermal power: 5.9 - 3.5 kW Water content: 1.1 litres Dimensions (HxWxD): 513 x 1200 x 173 (mm) Plinth Height: 93 (mm) Weight: 19.5 kg White color - Coat RAL 9002 - Headboard and Plinths RAL 7044 General characteristics AERMEC OMNIA UL Fan coils for universal installation for residential use, for heating, cooling and dehumidification, which can be combined with any heat generator. Cooling and heating Wall installation Floor installation Centrifugal fan Centralized control Compatible with VMF (Variable Multi Flow) system For two-pipe systems The units of the OMNIA UL (Universal Line) series are fan coil units suitable for air conditioning. Available in various configurations depending on the installation position, with the possibility of being ducted, they are characterized by multi-speed motors. They have fans in ABS material with an impeller equipped with airfoil fins and an inspectable cochlea. This feature gives the machine a clear reduction in the level of noise emitted, as well as a reduction in the electrical absorption of the motor, compared to traditional fans with a metal structure. The UL unit, in the PC version, is equipped as standard with the PLASMACLUSTER ionizing filter, while the RADIANT version is equipped with a radiant plate with on/off motor or inverter. The units can be equipped with multiple accessories and can be integrated into the VMF - Aermec centralized hydronic management system. Versions: UL-S: version without controls, with cabinet. Compatible with the VMF system UL: version with switch and cabinet UL-C: version with electronic thermostat and cabinet UL-PC: version with electronic thermostat, Plasmacluster filter (can be installed on site only) and mobile Characteristics: Cleaning the fan: With Omnia fan coils you can easily clean the fan blades. Now, in fact, it is possible to open the cochlea of the fan (the casing that encloses the blades) and proceed with their periodic cleaning. Cleaning the condensate tray: Thanks to a new fixing system for the condensate collection tray, now, with Omnia fan coils, it can be cleaned easily. This important solution avoids, in the long term, the formation of bacteria, germs and molds in the basin itself, due to the condensation of the humidity present in the air Electrostatically precharged filter: Omnia fan coils are equipped, as standard, with electrostatically precharged air filters. These filters, thanks to their particular construction, absorb and retain suspended dust: the ideal system to ensure healthy air for the whole family. Silent operation: Thanks to the adoption of special centrifugal fans, the Omnia fan coils have extremely silent ventilation which takes these new fan coils to the top of acoustic comfort thanks to the absence of noise peaks UL listed fan coil units for wall or floor installation EUROVENT certification 3-speed centrifugal fan group Maximum silence High design aesthetics with rounded lines Adjustable air distribution grille Automatic switch-off of the fan coil by closing the air distribution grille Small dimensions Electronic temperature regulation, automatic speed change on the fan, automatic season change and automatic on - off (version with thermostat) Reversibility of the hydraulic connections during installation Low pressure drop in the heat exchange coils Electric motors with permanently inserted capacitors Ease of installation and maintenance Easy to remove and clean air filter Electrostatically preloaded filter Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€463,00
-
Riello AREA OCCASIONI Ventilconvettore Fan Coil Riello Design Inverter 21 b con motore brushless con pannello di comando a bordo
ATTENZIONE IL PRODOTTO È NUOVO E CONTROLLATO DAI NOSTRI TECNICI, PRESENTA DIFETTI DA TRASPORTO: VITI NON DI SERIE ALLA GRIGLIA ANTERIORE E SULLA PARTE SUPERIORE IMBALLO USURATO (PER MAGGIORI DETTAGLI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE). Ventilconvettore Fan Coil Riello Design Inverter 21 b con motore brushless con pannello di comando a bordo Ventilconvettore tangenziali con motore Brushless Inverter Installazione verticale o orizzontale (accessorio) Dimensioni HxLxP mm 580x960x130 Codice 20116244 Caratteristiche GeneraliPotenza frigorifera 7°C-12°C 2120Resa termica 50°C W (2) 2775Resa termica 70°C-60°C W (3) 4670Portata aria massima m3 /h (4) 389Pressione sonora dBA 43,1-25,3 Design Inverter I DESIGN INVERTER sono i ventilconvettori Riello a motori DC Brushless Inverter, questa soluzione tecnologica permette una variazione continua da 0 a 100% della portata dell’aria e di conseguenza della potenza termica e frigorifera. I DESIGN INVERTER riscaldano e raffrescano con grande rapidità qualsiasi ambiente, è possibile scegliere tra due mappature dedicate: PERFORMANCE per ambienti commerciali, che richiedono rendimenti elevati e grande efficacia, e COMFORT per mantenere sempre la massima silenziosità negli ambienti residenziali.Grazie all’utilizzo dei motori DC Brushless, i DESIGN INVERTER risparmiano fino a 50% di elettricità rispetto ai ventilconvettori con motori tradizionali (tipo ON/OFF). Come tutta la famiglia HELIOTERM, la gamma DESIGN INVERTER è caratterizzata da un’estetica estremamente sottile con una profondità di solo 13 cm. La gamma è disponibile con 5 modelli in due colori (bianco e grigio metallizzato), con potenze in freddo da 830 W fino a 4560 W e in caldo da 1090 W fino a 4860 W. La vasta gamma dei accessori e i comandi con un DISPLAY touch, supportano un vasto campo di applicazione. Tutte le versioni sono installabili verticalmente o orizzontalmente (tramite un accessorio dedicato), con attacchi a sinistra. La struttura è realizzata in lamiera zincata con laterali in ABS nella versione in colore bianco, in lamiera in argento, la griglia frontale di mandata è in alluminio.- Estetica Ultra Slim- Profondità di 13 cm- Due colori disponibile- Unità installabili sia in verticale che in orizzontale- Semplicità d’installazione con attacchi a sinistra- Facilità di smontaggio e pulizia dei filtri- Comandi con Display Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
€330,00
