Wood-burning fireplace NEW VULCANO 25 vertical retractable 1 exchanger with control unit included Nb: models with 1 exchanger do not produce DHW VOLCANO The Vulcano closed fireplace is a modern, efficient, functional, aesthetically pleasing product, with management suited to today's needs and capable of combining these factors with the history and tradition of a century-old product such as the fireplace. Structure The structure is made of thick steel. The walls are smooth and free from mechanisms. The secondary exchangers are made of copper and are placed in a bain-marie in the interspaces of the primary. The painting is made with epoxy powders suitable for high temperatures. Plant engineering The plant engineering capacities are completely similar to fossil fuel boilers: it can feed any type of heating system, with any type of piping, with any type of circuit: open, closed or mixed, it can work alone or in combination with other boilers. Heating The thermal performance is also similar to fossil fuel boilers. In fact, it can correctly heat homes up to 320 m2, in any climatic zone and any energy class they belong to. Hot water The hot water supply is superior to the best instantaneous boilers and its flow is constant. Furthermore, each model has an internal supply proportionate to its power which allows it to guarantee the supply for several hours even with the fire off. You consume The new models have even greater efficiency which allows them to consume about a third of the gas boilers and less than half of the pellet ones for the same amount of heat supplied. Management Charges of any size can be carried out, it does not need to be looked after, it can be used for cooking food or as a barbecue, the ash can be removed 1-2 times a week and the same goes for cleaning the glass. The smoke duct should be cleaned 1-2 times a year. Models Four models are produced, suitable for heating surfaces from 50 to 320 m2. The choice must be made according to the indications given in the table below. Installation The installation of Vulcano fireplace stoves is simple, fast, legal and within the reach of all installers. This is due to their ability to directly perform all the functions that may be required: heating, hot water, interface with other boilers, etc. Once the model suitable for your needs has been purchased, it can be connected directly: without boilers, exchangers and various kits. To give you a better idea, we report some drawings of the most common installations of the three series. The figures with boilers refer to when they already exist or are needed for other generators or for specific needs. Usage The use of the Vulcano closed fireplace is very simple: even simpler than the classic fireplace. In fact, once loaded it does not need anything else: there is no need to remove the wood, there is no need to operate levers or switches, there is no need to change the combustion air, etc. In practice, you can also leave the house as you would with a classic fireplace, being careful not to leave the door open or flammable materials in the immediate vicinity. It is advisable to keep the door closed also to have a greater yield but nothing prevents you from keeping it open for cooking food or using the fireplace stove as a barbecue without any risk of smoke or bad smells in the house. Charges can be made of any size without fear of boiling or other anomalies: autonomy is based on the charge. The ash can be removed once a week as this new series has an even larger compartment and produces even less. The glass can be cleaned from once a day to once a week depending on the humidity of the wood and the draft in the flue. The hydrothermal aspect is managed automatically directly by the control unit, therefore it is not necessary to activate switches and stop keys and neither is it necessary to make adjustments or manual interventions of any kind. From a safety point of view, once the closed fireplace has been installed according to the instructions given in the instruction manual, no dangerous situations can arise under any conditions (except those of a normal fireplace). Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Wood-burning fireplace NEW VULCANO 25 vertical retractable 3 exchangers with control unit included VOLCANO The Vulcano closed fireplace is a modern, efficient, functional, aesthetically pleasing product, with management suited to today's needs and capable of combining these factors with the history and tradition of a century-old product such as the fireplace. Structure The structure is made of thick steel. The walls are smooth and free from mechanisms. The secondary exchangers are made of copper and are placed in a bain-marie in the interspaces of the primary. The painting is made with epoxy powders suitable for high temperatures. Plant engineering The plant engineering capacities are completely similar to fossil fuel boilers: it can feed any type of heating system, with any type of piping, with any type of circuit: open, closed or mixed, it can work alone or in combination with other boilers. Heating The thermal performance is also similar to fossil fuel boilers. In fact, it can correctly heat homes up to 320 m2, in any climatic zone and any energy class they belong to. Hot water The hot water supply is superior to the best instantaneous boilers and its flow is constant. Furthermore, each model has an internal supply proportionate to its power which allows it to guarantee the supply for several hours even with the fire off. You consume The new models have even greater efficiency which allows them to consume about a third of the gas boilers and less than half of the pellet ones for the same amount of heat supplied. Management Charges of any size can be carried out, it does not need to be looked after, it can be used for cooking food or as a barbecue, the ash can be removed 1-2 times a week and the same goes for cleaning the glass. The smoke duct should be cleaned 1-2 times a year. Models Four models are produced, suitable for heating surfaces from 50 to 320 m2. The choice must be made according to the indications given in the table below. Installation The installation of Vulcano fireplace stoves is simple, fast, legal and within the reach of all installers. This is due to their ability to directly perform all the functions that may be required: heating, hot water, interface with other boilers, etc. Once the model suitable for your needs has been purchased, it can be connected directly: without boilers, exchangers and various kits. To give you a better idea, we report some drawings of the most common installations of the three series. The figures with boilers refer to when they already exist or are needed for other generators or for specific needs. Usage The use of the Vulcano closed fireplace is very simple: even simpler than the classic fireplace. In fact, once loaded it does not need anything else: there is no need to remove the wood, there is no need to operate levers or switches, there is no need to change the combustion air, etc. In practice, you can also leave the house as you would with a classic fireplace, being careful not to leave the door open or flammable materials in the immediate vicinity. It is advisable to keep the door closed also to have a greater yield but nothing prevents you from keeping it open for cooking food or using the fireplace stove as a barbecue without any risk of smoke or bad smells in the house. Charges can be made of any size without fear of boiling or other anomalies: autonomy is based on the charge. The ash can be removed once a week as this new series has an even larger compartment and produces even less. The glass can be cleaned from once a day to once a week depending on the humidity of the wood and the draft in the flue. The hydrothermal aspect is managed automatically directly by the control unit, therefore it is not necessary to activate switches and stop keys and neither is it necessary to make adjustments or manual interventions of any kind. From a safety point of view, once the closed fireplace has been installed according to the instructions given in the instruction manual, no dangerous situations can arise under any conditions (except those of a normal fireplace). Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NEW VULCANO 25 wood-burning thermo-fireplace with vertical disappearance 2 exchangers with control unit included VOLCANO The Vulcano thermo-fireplace is a modern, efficient, functional, aesthetically pleasing product, with a management suited to today's needs and capable of combining these factors with the history and tradition of a century-old product such as the fireplace. Structure The structure is made of thick steel. The walls are smooth and free from mechanisms. The secondary exchangers are made of copper and are placed in a bain-marie in the cavities of the primary. The painting is made with epoxy powders suitable for high temperatures. Plant engineering The plant capabilities are completely similar to fossil fuel boilers: it can power any type of heating system, with any type of piping it is made with, with any type of circuit: open, closed or mixed, it can work alone or in combination with other boilers. Heating Thermal performance is also similar to fossil fuel boilers. In fact, it can properly heat homes up to 320 m2, in any climate zone and whatever energy class they belong to. Hot water The hot water supply is superior to the best instantaneous boilers and its flow is constant. In addition, each model has an internal reserve proportionate to its power that allows it to guarantee the supply for several hours even with the fire off. Consumption The new models have an even greater efficiency that allows them to consume approximately a third of gas boilers and less than half of pellet boilers for the same amount of heat supplied. Management You can make any size of charge, you don't need to take care of it, you can use it for cooking food or as a barbecue, the ash can be removed 1-2 times a week and the same goes for cleaning the glass. The flue pipe should be cleaned 1-2 times a year. Models Four models are produced, suitable for heating surfaces from 50 to 320 m2. The choice must be made according to the indications given in the table below. Installation The installation of Vulcano thermo-fireplaces is simple, fast, legal and within the reach of all installers. This is due to their ability to directly perform all the functions that may be necessary: ​​heating, hot water, interface with other boilers, etc. Once you have purchased the model that best suits your needs, you can connect it directly: without boilers, exchangers and various kits. To give you a better idea, we report some drawings regarding the most common installations of the three series. The figures with boilers refer to when they already exist or are needed for other generators or for specific needs. Usage The use of the Vulcano thermo-fireplace is very simple: even simpler than the classic fireplace. In fact, once loaded it does not need anything else: there is no need to remove the wood, there is no need to operate levers or switches, there is no need to modify the combustion air, etc. In practice you can even leave the house as you would with a classic fireplace, taking the same care not to leave the door open or flammable materials in the immediate vicinity. It is advisable to keep the door closed also to have a greater performance but nothing prevents you from keeping it open for cooking food or using the thermo fireplace as a barbecue without any risk of smoke or bad smells in the house. Charges can be made of any size without fear of boiling or other anomalies: the autonomy is based on the charge. The ash can be removed once a week as this new series has an even larger compartment and produces even less. The glass can be cleaned from once a day to once a week depending on the humidity of the wood and the draft of the flue. The hydrothermal aspect is managed automatically directly by the control unit, therefore there is no need to operate switches and stop keys and it is not necessary to make adjustments or manual interventions of any kind. From a safety perspective, once the thermo-fireplace has been installed according to the instructions in the instruction manual, no dangerous situations can arise under any conditions (except those of a normal fireplace). Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical Features Model : New Vulcano 30-3 Fuel: Wood Water content: 123 litres Heatable surface area: 120 - 220 m 2 Minimum distance from flammable materials: 18 cm Weight: 335 Kg Primary exchanger Total Power: 30.3 kW Nominal Thermal Power: 25 kW Thermal power output in water: 16.5 kW Power output to the environment: 8.5 kW Efficiency: 83.5 kW CO : 0.26 kW Wood consumption: 6.2 kW/h Smoke temperature: 216° Minimum chimney draft: 12 Pa Combustion gas volumetric flow: 21.5 g/s Maximum water pressure allowed: 1.5 bar Pressure drop: mt 0.1 H 2 O Secondary exchangers Total Power: 30.3 kW Nominal Thermal Power: 25 kW Thermal power output in water: 15 kW Power output to the environment: 10 kW Efficiency: 83 kW CO : 0.223 kW Wood consumption: 6.2 kW/h Smoke temperature: 224° Minimum chimney draft: 12 Pa Combustion gas volumetric flow: 21.6 g/s Maximum water pressure allowed: 6 bar Pressure drop: mt 1.8 H 2 O NEW VULCANO New generation thermo-fireplaces Vulcano produces a single range of thermo-fireplaces with four different potentials, suitable for heating surfaces from 0 to 320 m 2 . All models have the same aesthetics, but the overall dimensions, weight and water content change. Each model can be requested based on individual system needs: with only the primary exchanger, with the primary and a secondary, with the primary and two secondaries. Since the exchangers are all inside the thermo-fireplaces, in order to identify them, the number of exchangers contained is added to each code. The right choice As for the model suitable for the size of the house, you can use the table below, taking care not to exceed the minimum or maximum limits. The thermo-fireplace must be chosen based on the size of the house and the needs of the system created or to be created Heating Vulcano was not created to only help with the main heating system. It was created instead to provide homes with all the heat they need. The thermo-fireplaces heat homes up to 300m 2 completely autonomously, without any need for help from other generators. This even in very cold areas or in poorly insulated homes. Heating is provided by the existing system, whatever it is. The new models are equipped with a special thermal flywheel that makes them particularly suitable for floor systems. Domestic Hot Water The Vulcano thermo-fireplace provides hot water in large quantities and at high temperatures, as much as and more than the best gas boilers. It is also equipped with an internal reserve that guarantees the supply for several hours, even in the absence of fire. In practice: by loading wood in the morning you have hot water coverage for the entire day. By loading in the evening you have hot water for the next day too. All directly, without additional exchangers or boilers. So we can certainly say that during the period of use of the Vulcano thermo-fireplace the gas boiler will almost always remain off and costs will drop dramatically and performance will increase. It can also be turned on from above Thermo-fireplaces have two distinct functions: that of a boiler and that of a fireplace. Vulcano is the only one that performs both without penalizing either of them. From the fireplace aspect, Vulcano works in a natural way like a classic fireplace. Its use is simple, pleasant and accessible to everyone. Vulcano can be loaded in any way. Even by placing the wood one on top of the other as if you wanted to stack it. Combustion will be excellent in any case. It can be loaded with both small and large loads of wood. A good load can guarantee 6 or 7 hours of heating autonomy and 12 to 24 hours of hot water Vulcano burns at any point in the combustion chamber, both in the center and on the sides. Once the flame is ignited, the wood burns slowly and steadily until it is completely exhausted, without any need for manual intervention. During the entire phase from lighting to extinguishing the fire, the wood remains still. Therefore there is no risk of it falling or even crashing against the glass of the door. Once the load is exhausted, a layer of embers remains that covers the entire surface of the thermo-fireplace. This is the best time for barbecue lovers. In terms of boiler, Vulcano has the same performance as a gas boiler in both the heating and domestic hot water functions and its management is also extremely simple. Consumption Autonomy The above data refers to an autonomy of approximately 6 hours and wood with humidity around 20% The Electronic Control Units The Vulcano thermo-fireplace control units automatically manage any system situation. To avoid incorrect settings, they are factory-calibrated to the best possible operating conditions. Each control unit is equipped with an explanatory sheet containing the electrical diagram, the connection points, the blocks it is equipped with and the relative functions. The connection points are also shown on the terminal board The display lock allows you to view the temperature in the thermo-fireplace: up to 29° you see two lines, from 30° to 98° you see the degrees, at 99° they become intermittent. In the descending phase at 97° they become fixed again, at 29° the lines reappear The pump block starts and stops the circulator in three ways. Automatically: between 55° and 59° intermittently, above 59° continuously; in the descending phase: up to 60° continuously, below intermittently, at 53° stopped In the antifreeze function the control unit activates the circulator at 4° and stops it at 5°. Between 5° and 54° it can also be activated manually. Outside these temperatures it goes into automatic mode The alarm block signals the boiling of the thermo fireplace by means of the acoustic alarm and by the intermittent degrees on the display. The heating block allows you to automatically alternate the thermo fireplace with other boilers between 55° and 53° The summer- winter block allows you to select between hot water supply only and the simultaneous hot water - heating function The hot water block allows you to control any solenoid valves to alternate the supply of hot water between the thermo-fireplace and other producers. The alternation occurs between 43° and 44° All models are equipped as standard Protection of sheet metal with a special treatment Vertically retractable door with external arm with 750° resistant ceramic glass Adjustable feet for leveling Internal smoke passage cleaning tool Instruction booklet Certifications and attestations Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less