Get customized comfort with wall mounted Fan Coils. Elegant design, efficient performance and precise temperature control. Choose from our selection of wall mounted Fan Coils for effective and silent heating and cooling.
Wall Mounted Fan Coil Fan Coils
Aermec Aermec Fan Coil Fan Coil Mod. Omnia Hl N 11 With Electronic Control Included
FAN COIL FAN COIL AERMEC model OMNIA HL N 11 vertical and horizontal installation Hot-cold kW (High): 1.46 - 0.68 Dimensions with feet (HxWxD): 600 x 640 x 187 (mm) Weight: 13.6 kg White color General characteristics OMNIA HL The units of the OMNIA HL (High Line) series are fan coils suitable for air conditioning. Available in various configurations, they can be installed on the floor or on the ceiling and are characterized by multi-speed motors, three of which are selectable. They have fans in ABS material with an impeller equipped with airfoil fins and an inspectable cochlea. This feature gives the machine a clear reduction in the level of noise emitted, as well as a reduction in the electrical absorption of the motor, compared to traditional fans with a metal structure. The HL unit, in the PC and PCM version, is standard equipped with the PLASMACLUSTER ionizing filter. The units can be equipped with multiple accessories and can be integrated into the VMF - Aermec centralized hydronic management system. HL (High Line) fan coils for both horizontal and vertical installation 4 sizes and 10 versions: HL: white cabinet with switch HL M: gray cabinet with switch HL N: white cabinet with VMF electronic thermostat HL NM: gray cabinet with VMF electronic thermostat HL L: white cabinet with self-closing flap and electronic thermostat HL LM: gray cabinet with self-closing flap and electronic thermostat HL PC: white cabinet with electronic thermostat and Plasmacluster filter (can be installed on site only) HL PCM: gray cabinet with electronic thermostat and Plasmacluster filter (can be installed on site only) HL S: white cabinet without controls. Compatible with the VMF system HL SM: gray cabinet without controls. Compatible with the VMF system On/off fan coils for universal installation for residential use, for heating, cooling and dehumidification, which can be combined with any heat generator. 3-speed centrifugal fan group Maximum silence High design aesthetics with rounded lines New adjustable air distribution grille Automatic switch-off of the fan coil by closing the air distribution grille Small dimensions Electronic temperature regulation, automatic speed change on the fan, automatic season change and automatic on - off (version with thermostat) Reversibility of the hydraulic connections during installation Low pressure drop in the heat exchange coils Electric motors with permanently inserted capacitors Ease of installation and maintenance Full compliance with accident prevention regulations Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€395,00
-
Ferroli Fan Coil Fan Coil Ferroli Jolly Top 3v 150 Vm150k - New
OPTIONAL SWITCH Fan Coil Fan Coil Ferroli Jolly Top 3V 150 vm150K - NEW Power supply V-ph-Hz 230-1-50 Total cooling capacity max/med/min kW 1.65/1.22/1.09 Max/med/min heat output kW 1.85/1.29/1.13 3 General data Max/med/min air flow m³/h 255/165/142 Absorbed power max/med/min W 35/17/14 Absorbed current max/med/min A 0.15/0.07/0.06 Sound power max/med/min dB(A) 47/35/34 Dimensions HxWxD 495x790x200 mm JOLLY 3V New series of fan coils with centrifugal fan with 3-speed AC motor. Characterized by a maximum depth of 200 mm and in the version with casing by a particularly captivating aesthetic line, they are suitable for residential heating and air conditioning applications. Available in 5 sizes with cooling capacities from 1.65 to 6.00 kW and air flow rates from 255 to 1300 m3 /h. In the standard version they are offered with a single 3-row coil which can be combined as an accessory, in the case of 4-pipe systems, with an additional 1-row coil. Available in two versions, VM with cabinet and VN without cabinet for built-in applications. The units can be installed both in vertical and horizontal position. VM version Fan coil unit with intake from the bottom Consisting of a sheet metal cover, a delivery grille with doors for access to any control, in thermoplastic material and a regenerable air filter, placed on a metal frame housed on guides obtained in the lower part of the frame. Construction features SUPPORTING STRUCTURE It is made of galvanized sheet metal of adequate thickness. On the back there are slots for fixing the device. For models without a covering casing, a closing panel for the fan group is provided, mounted on the front THERMAL EXCHANGE COIL 3-row coil in copper tube and aluminum fins blocked by mechanical expansion of the tubes. The manifolds in the upper part of the battery are equipped with air vents, while in the lower part they have a water drain valve*. * The default hydraulic connection for the coil is on the LEFT. However, it is possible to turn the coil and change it to the RIGHT (see Installation Manual). CONDENSATE COLLECTION TRAY optional Made of thermoplastic material to avoid corrosion phenomena, it allows the machine to be installed in both vertical and horizontal positions. In particular, in horizontal installation, its shape makes it possible to collect the drops of condensation that form on the collectors during cold operation. The drain hole is obtained directly from the condensate collection tray and allows it to be eliminated during cold operation. It is present on both sides of the machine to facilitate rotation of the battery FAN MOTOR (for version I) The electric motor is of the DC brushless type with high efficiency continuous speed regulation and is directly coupled to the fans and cushioned by elastic supports. FAN MOTOR (for 3V version) The electric motor, protected against possible overloads, has three speeds with running capacitor always on, directly coupled to the fans and cushioned by elastic supports. CENTRIFUGAL FAN The fan group consists of double suction centrifugal fans with blades developed in length to obtain high flow rate with reduced number of revolutions. AIR FILTER Easily removable and regenerable by simply washing with water. COVER (VM only) Partly made of steel sheet painted with epoxy powders to guarantee high resistance to corrosion and partly in anti-UV thermoplastic material to guarantee resistance to ultraviolet rays. The grilles for air diffusion and the door for accessing the control panel are inserted in the upper part, both in anti-UV thermoplastic material. HYDRAULIC CONNECTIONS The connections, positioned on the left side, are of the ¾” gas female type. It is possible to rotate the coil which is supplied standard with left side connections, moving the hydraulic connections to the right side. These new units are characterized by an elegant aesthetic line and by the multiple possibilities of insertion in different types of system. The mantellati models lend themselves to wall or niche solutions (raised or resting on feet), or suspended horizontally from the ceiling. The dismantled models are particularly suitable for concealed built-in solutions or inside false ceilings. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€240,00
-
Carrier Fan Coil Fan Coil Carrier Idrofan 42nms15fa On Board Type ''A'' Command
IDROFAN 42NMS15FA Fan Coil Carrier Fan Coil with ''A'' type command on board Vertical console with cabinet Cooling capacity: 1.49 kW Heating capacity: 2.09 kW Electric resistance (high capacity) W 800 Electric resistance (low capacity) W 500 Dimensions WxD: 830 x 220 Height (with 100mm feet): 657 Weight: 17Kg Type A control already mounted on board CARRIER Thanks to its simple and elegant design (winner of the ADI Design award) it is the ideal solution for many applications, such as hotels, offices and commercial buildings. Maximum optimization of comfort and reduction of energy costs. Available in the built-in version for installation in false ceilings or with cabinet for visible installation (only 220 mm in height for the built-in unit). Both in the version with high-efficiency variable-speed LEC (brushless) motors and with multispeed AC motor, it allows you to promptly respond to the need for comfort, efficiency and versatility. A variety of thermostats and controls are available either on board or remote for wall installation Energy efficiency is the class of its success The range of IDROFAN 42N fan coil units fits perfectly with the new reference requirements for buildings with low energy consumption, offering greater energy savings and immediate comfort for users. Its success is essentially due to low energy consumption and construction features based on modularity, ease of installation and reliability. Reducing CO2 emissions into the atmosphere by 20% by 2020 is a goal that IDROFAN already achieved a few years ago. IDROFAN is designed to maximize efficiency and savings, through the use of more flexible technologies aimed at protecting the natural environment. The new range of IDROFAN 42N fan coils is the ideal solution for multiple applications, such as hotels, offices and commercial buildings, allowing you to optimize comfort and reduce energy costs The high performance fan of the IDROFAN range incorporates the latest technology of LEC motors, variable speed, or five speeds, improving user comfort thanks to a noise level reduction of up to -10 dB(A) compared to previous models. The LEC variable speed motor coupled to the latest generation NTC electronic control, the almost imperceptible air flow and the fan speeds that can be customized on site, ensure the best comfort and ultra-quiet operation. Reduced consumption facilitate compliance with new laws regarding energy consumption Maximum flexibility minimum size and wide range of powers for any installation and climate Perfect integration and low noise impact with any building management system Improved comfort thanks to advanced technologies that guarantee silence and well-being Accessories TYPE "A" Electronic Thermostat Control for IDROFAN 2-pipe fan coils, 42N series, wall-mounted, CARRIER ( Code 33TA-AC01) Kit for installation of type "A" control on board the 42NM/Z unit (Cod. 42N9100) The TYPE "A" CARRIER control is suitable for controlling IDROFAN convectors in both heating and cooling modes. With: Power button for switching on/off the fan coil; Mode button for manual adjustment of the heating/cooling functions indicated by special red/blue LEDs; Ventilation Adjustment Button with the 3 Speeds (I-II-III) that can be set manually, the Economy mode for energy saving and the Auto mode, all signaled from time to time by special LEDs; Temperature Selector Knob with a range from + 10°C. at + 30°C. Antifreeze function which is activated with temperatures below 7°C., Night and Dimming mode which acts on the lights of the operating LEDs, AutoTest , possibility of configuring the adjustments during installation using special microswitches, possibility of using the internal temperature sensor in case of wall installation or a remote sensor - Minimum Temperature Probe in case of installation on the machine (to be purchased separately) . The CARRIER Type "A" Control can be installed on the fan-coil using the special Kit for installing the Type "A" Control on the 42NM/Z unit ( allows connection of the Control to the electrical components of the fan coil and consists supplied by: cable kit, air probe, bracket, adhesive bands, screws ) Code 42N9100. Controls the fan coil in both the heating and cooling functions where the system is set up for this type of function. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€226,00
-
Aermec Aermec Fan Coil Fan Coil Mod. Omnia Hl 26 With Control Included
FAN COIL FAN COIL AERMEC model OMNIA HL 26 vertical and horizontal installation Hot-cold kW (High): 3.83 - 1.68 Dimensions with feet (HxWxD): 615 x 980 x 191 (mm) Weight: 17.6 kg White color General characteristics OMNIA HL The units of the OMNIA HL (High Line) series are fan coils suitable for air conditioning. Available in various configurations, they can be installed on the floor or on the ceiling and are characterized by multi-speed motors, three of which are selectable. They have fans in ABS material with an impeller equipped with airfoil fins and an inspectable cochlea. This feature gives the machine a clear reduction in the level of noise emitted, as well as a reduction in the electrical absorption of the motor, compared to traditional fans with a metal structure. The HL unit, in the PC and PCM version, is standard equipped with the PLASMACLUSTER ionizing filter. The units can be equipped with multiple accessories and can be integrated into the VMF - Aermec centralized hydronic management system. HL (High Line) fan coils for both horizontal and vertical installation 4 sizes and 10 versions: HL: white cabinet with switch HL M: gray cabinet with switch HL N: white cabinet with VMF electronic thermostat HL NM: gray cabinet with VMF electronic thermostat HL L: white cabinet with self-closing flap and electronic thermostat HL LM: gray cabinet with self-closing flap and electronic thermostat HL PC: white cabinet with electronic thermostat and Plasmacluster filter (can be installed on site only) HL PCM: gray cabinet with electronic thermostat and Plasmacluster filter (can be installed on site only) HL S: white cabinet without controls. Compatible with the VMF System HL SM: gray cabinet without controls. Compatible with the VMF system On/off fan coils for universal installation for residential use, for heating, cooling and dehumidification, which can be combined with any heat generator. 3-speed centrifugal fan group Maximum silence High design aesthetics with rounded lines New adjustable air distribution grille Automatic switch-off of the fan coil by closing the air distribution grille Small dimensions Electronic temperature regulation, automatic speed change on the fan, automatic season change and automatic on - off (version with thermostat) Reversibility of the hydraulic connections during installation Low pressure drop in the heat exchange coils Electric motors with permanently inserted capacitors Ease of installation and maintenance Full compliance with accident prevention regulations Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€430,00
-
Aermec Aermec Fan Coil Fan Coil Mod. FCZ-A 200 With Switch Included Heating Only
COMPLETE WITH SWITCH FAN COIL FAN COIL AERMEC model FCZ-A 200 with control included heating only Technical features version with switch Heating version Dimensions with feet (HxWxD): 576 x 750 x 220 (mm) Weight without feet: 15 kg White color Coat RAL 9003 Headboard and Plinths RAL 7047 General characteristics Aermec FCZ fan coils Taking advantage of the exceptional experience gained with fan coil units, Aermec presents the new FCZ series where elegant design marries state-of-the-art performance in terms of sound level and energy consumption. They can be installed in any type of 2/4 pipe system and in combination with any heat generator even at low temperatures and thanks to the availability of various versions and configurations, it is easy to choose the optimal solution for any requirement. FCZ series fan coils are suitable for air conditioning. These machines with a renewed design are available in various configurations according to the installation position, with the possibility also of being ducted. They are characterized by multi-speed motors coupled to ABS fans with an impeller equipped with airfoil fins and an inspectable auger. This feature gives the machine a clear reduction in the level of noise emitted, as well as a reduction in the electrical absorption of the motor, compared to traditional fans with a metal structure. The unit equipped with a 3 or 4-row coil can have an additional 1 or 2-row secondary coil for 4-pipe system configurations. T-touch thermostat, available as an accessory, equipped with NFC technology to control the fan coil with smartphone. FCZ are compatible with the VMF management system. (Features vary by model) Cooling capacity: 1 ÷ 6.81 kW Thermal power: 2.4 ÷ 15.52 kW Cooling and heating Floor installation Wall installation Ceiling installation Touch control (Option) Centralized control (Option) Compatible with VMF (Variable Multi Flow) system (Option) For two-pipe systems For four-pipe systems Characteristics: RAL9003 shell, RAL 7047 head Three speed centrifugal fan. Electric motors with permanently inserted capacitors Protective metal cabinet with anti-corrosion polyester paint Adjustable air distribution grille for U version. When the grille closes, the fan coil switches off automatically Low pressure drop in the heat exchange coils Ease of installation and maintenance G2 class air filter for all versions, easy to remove and clean. In the APC versions, air purification is ensured by the Plasmacluster purifier Extractable and inspectable augers for easy and effective cleaning Reversibility of the water connections during installation only for units with main, standard or oversized coil (Non-reversible for units with secondary coil). In the units with the T-Touch electronic thermostat and the ThermApp application, it is possible to simply place the smart device on the fan coil to set the operating modes and the weekly time programming. Using the graphical interface of the App, it is also possible to access numerous other information such as the alarm list, the nearest satellite, etc. Available for Android operating systems Versions Without on-board control Vertical and horizontal installation: FCZ_U FCZ_UA Vertical installation FCZ_DS FCZ_AS Versions With on-board control Vertical installation only: FCZ_D FCZ_A FCZ_ACT FCZ_APC Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€261,00
-
Innova Innova 2-Way Valve Group (Inlet Valve And Lockshield) With Thermoelectric Motor For Filomuro And Filomuro Concealed V20687ii
Innova 2-way valve group (inlet valve and lockshield valve) with thermoelectric motor for Filomuro and Filomuro recessed V20687II
€115,00
-
Ferroli Fan Coil Fan Coil Ferroli Jolly Top I Inverter Vm150 2.18 Kw
Command excluded to be purchased separately (TE/TER) Fan Coil Fan Coil Ferroli Jolly Top I Inverter VM150 2.18 kW Power supply V-ph-Hz 230-1-50 Total cooling capacity max/med/min kW 1.50/1.06/0.92 Thermal power max/med/min 70/60 °C kW 3.18/2.18/1.89 General data Max/med/min air flow m³/h 255/170/150 Absorbed power max/med/min W 15/9/ 8 Sound power max/med/min dB(A) 47/36/34 Dimensions WxHxD mm 790x495x200 JOLLY I New series of fan coils with centrifugal type fan with high efficiency brushless DC motor. Characterized by a maximum depth of 200 mm and in the version with casing by a particularly attractive aesthetic line, they are suitable for heating applications and residential air conditioning. Available in 5 sizes with cooling capacities from 1.50 to 5.60 kW and air flow rates from 255 to 1190 m3 /h. In the standard version they are offered with a single 3-row coil which can be combined as an accessory, in the case of 4-pipe systems, with an additional 1-row coil. Available in two versions, VM with cabinet and VN without cabinet for built-in applications. The units can be installed both in vertical and horizontal position Construction features - VM versions SUPPORTING STRUCTURE It is made of galvanized sheet metal of adequate thickness. On the back there are slots for fixing the device. For models without a covering casing, a closing panel for the fan group is provided, mounted on the front THERMAL EXCHANGE COIL 3-row coil in copper tube and aluminum fins blocked by mechanical expansion of the tubes. The manifolds in the upper part of the battery are equipped with air vents, while in the lower part they have a water drain valve*. * The default hydraulic connection for the coil is on the LEFT. However, it is possible to turn the coil and change it to the RIGHT (see Installation Manual). CONDENSATE COLLECTION TRAY optional Made of thermoplastic material to avoid corrosion phenomena, it allows the machine to be installed in both vertical and horizontal positions. In particular, in horizontal installation, its shape makes it possible to collect the drops of condensation that form on the collectors during cold operation. The drain hole is obtained directly from the condensate collection tray and allows it to be eliminated during cold operation. It is present on both sides of the machine to facilitate rotation of the battery FAN MOTOR (for version I) The electric motor is of the DC brushless type with high efficiency continuous speed regulation and is directly coupled to the fans and cushioned by elastic supports. AIR FILTER Easily removable and regenerable by simply washing with water. COVER (VM only) Partly made of steel sheet painted with epoxy powders to guarantee high resistance to corrosion and partly in anti-UV thermoplastic material to guarantee resistance to ultraviolet rays. The grilles for air diffusion and the door for accessing the control panel are inserted in the upper part, both in anti-UV thermoplastic material. HYDRAULIC CONNECTIONS The connections, positioned on the left side, are of the ¾” gas female type. It is possible to rotate the coil which is supplied standard with left side connections, moving the hydraulic connections to the right side. These new units are characterized by an elegant aesthetic line and by the multiple possibilities of insertion in different types of system. The mantellati models lend themselves to wall or niche solutions (raised or resting on feet), or suspended horizontally from the ceiling. The dismantled models are particularly suitable for concealed built-in solutions or inside false ceilings. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€330,00
-
Climaveneta Fan Coil Fan Coil With Tangential Fan And Climaveneta Inverter Motor Model I-Life2 Slim 320 2 Pipe Version With Control Included
Technical features Model : i-LIFE2 320 Cooling power: 2.52 kW Heating power: 3.08 kW Power supply (V/Hz/n°) : 230/50/1 Number of Pipes : 2 Treated volume : 430 - 593 m3 Sound pressure : 46 (dB) Sound power : 55 (dB) Dimensions and weight Dimensions : 1337x131x579mm Weight : 26.0 Kg General characteristics ClimaVeneta Fan Coil I-LIFE-2-SLIM-080-DLMV, version with cabinet for vertical installation, with tangential fan and motor with Inverter technology, for residential applications. i-LIFE2 SLIM is the new Climaveneta fan coil with inverter technology for heating, cooling and dehumidification. The minimal design and reduced depth (only 13 cm) make it the perfect solution for installations in residential environments. The motor, with electronic speed switching, allows perfect adaptation to the internal load of the environment without temperature variations. Furthermore, the tangential fan unit allows continuous modulation of the air flow without step variations and without the annoying switching of the relays. Basically, this fan coil has been designed to maintain the set temperature with very low sound levels and, above all, with high energy efficiency. Characteristics: DC Inverter motor with continuous speed regulation in order to guarantee high performance with very low noise levels Elegant design and depth of only 13 cm for installation in residential environments Coil with a large frontal surface which allows the achievement of high air flows with minimum pressure drops Air filter with honeycomb structure in polypropylene (PP) regenerable by washing or blowing Tangential fan with asymmetrical blades to ensure continuous modulation of the air flow for high comfort and significant energy savings On-board control unit complete with touch keyboard with 8 "touch" keys, backlit LCD display with colored light symbols. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€764,00
-
OLIMPIA SPLENDID Fan Coil Fan Coil Olimpia Splendid Inverter Model Bi2 Sl Air 600 With Tr Control Included Code 01853
THE PRODUCT IS AVAILABLE FROM NOVEMBER 2021 Technical features Product code 01853 Total cooling output (a) (E) kW 2.54 Water flow rate (a) l/h 446 Battery water content l 1.13 Maximum working pressure 10 bar Eurocone 3/4 inch hydraulic connections Max absorbed power (E) W 20 Sound power min-max 41/53 dB(A) Sound pressure (f) dB(A) 37 Power supply V/ph/Hz 230/1/50 Dimensions WxHxD 1095x599x129mm SL Air inverter accessories TR (Touch Remote) control included Wall-mounted LCD programmable thermostat B0736 control for MODBUS, RS485 connection - optional Possibility of controlling up to 30 units. Desired temperature selection, operating mode, fan speed, manual/chronothermostat mode. Ambient probe inserted in the command. Backlit LCD display. Bi2 SL AIR Bi2® Air is the system terminal that heats, cools, dehumidifies and filters. Thanks to its integral design, just 12.9 cm thick, installing and maintaining the machine has never been easier! With the innovative integrated multiset control you also have maximum comfort always at hand. INTEGRAL DESIGN® Thanks to the essential design and the front body combined with the lateral sides, the installation and maintenance of Bi2 Air are simplified MULTISET CONTROL Integrated multiset electronics for touch use on board the machine or for universal dialogue with remote controls and home automation Characteristics: Heat, Cool, Dehumidify and Filter Integral aesthetics with suction from the lower side Front in metal, sides in ABS Compact: Thickness min 12.9 cm max 15 cm Range made up of 5 power models DC brushless motor Monobloc body for working in comfort Motorized steel air delivery flap Anti-intrusion grilles on the air intake and outlet Removable filters located on the air intake Remote control supplied TR CONTROL (Touch Remote): Touch control on the machine and remote control supplied. Through a selection of keys on the machine, it is possible to remote control* with wall remote control (chronothermostat code B0736, optional) or with home automation, through the Modbus RS485 signal protocol Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€482,00
-
Carrier Fan Coil Carrier Idrofan 42nms 30f
Fan Coil Carrier IDROFAN 42NMS 30F Vertical console with cabinet Cooling capacity: 3.7 kW Heating capacity: 5.29 kW Electric resistance (high capacity) W 2000 Electric resistance (low capacity) W 1000 Dimensions WxD: 1230 x 220 Height (with 100mm feet): 657 Weight: 22Kg CARRIER Thanks to its simple and elegant design (winner of the ADI Design award) it is the ideal solution for many applications, such as hotels, offices and commercial buildings. Maximum optimization of comfort and reduction of energy costs. Available in the built-in version for installation in false ceilings or with cabinet for visible installation (only 220 mm in height for the built-in unit). Both in the version with high-efficiency variable-speed LEC (brushless) motors and with multispeed AC motor, it allows you to promptly respond to the need for comfort, efficiency and versatility. A variety of thermostats and controls are available either on board or remote for wall installation Energy efficiency is the class of its success The range of IDROFAN 42N fan coil units fits perfectly with the new reference requirements for buildings with low energy consumption, offering greater energy savings and immediate comfort for users. Its success is essentially due to low energy consumption and construction features based on modularity, ease of installation and reliability. Reducing CO2 emissions into the atmosphere by 20% by 2020 is a goal that IDROFAN already achieved a few years ago. IDROFAN is designed to maximize efficiency and savings, through the use of more flexible technologies aimed at protecting the natural environment. The new range of IDROFAN 42N fan coils is the ideal solution for multiple applications, such as hotels, offices and commercial buildings, allowing you to optimize comfort and reduce energy costs The high performance fan of the IDROFAN range incorporates the latest technology of LEC motors, variable speed, or five speeds, improving user comfort thanks to a noise level reduction of up to -10 dB(A) compared to previous models. The LEC variable speed motor coupled to the latest generation NTC electronic control, the almost imperceptible air flow and the fan speeds that can be customized on site, ensure the best comfort and ultra-quiet operation. Reduced consumption facilitate compliance with new laws regarding energy consumption Maximum flexibility minimum size and wide range of powers for any installation and climate Perfect integration and low noise impact with any building management system Improved comfort thanks to advanced technologies that guarantee silence and well-being Accessories TYPE "A" Electronic Thermostat Control for IDROFAN 2-pipe fan coils, 42N series, wall-mounted, CARRIER ( Code 33TA-AC01) Kit for installation of type "A" control on board the 42NM/Z unit (Cod. 42N9100) The TYPE "A" CARRIER control is suitable for controlling IDROFAN convectors in both heating and cooling modes. With: Power button for switching on/off the fan coil; Mode button for manual adjustment of the heating/cooling functions indicated by special red/blue LEDs; Ventilation Adjustment Button with the 3 Speeds (I-II-III) that can be set manually, the Economy mode for energy saving and the Auto mode, all signaled from time to time by special LEDs; Temperature Selector Knob with a range from + 10°C. at + 30°C. Antifreeze function which is activated with temperatures below 7°C., Night and Dimming mode which acts on the lights of the operating LEDs, AutoTest , possibility of configuring the adjustments during installation using special microswitches, possibility of using the internal temperature sensor in case of wall installation or a remote sensor - Minimum Temperature Probe in case of installation on the machine (to be purchased separately) . The CARRIER Type "A" Control can be installed on the fan-coil using the special Kit for installing the Type "A" Control on the 42NM/Z unit ( allows connection of the Control to the electrical components of the fan coil and consists supplied by: cable kit, air probe, bracket, adhesive bands, screws ) Code 42N9100. Controls the fan coil in both the heating and cooling functions where the system is set up for this type of function. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€252,00
-
Aermec Aermec Fan Coil Fan Coil Mod. Omnia Ul 16c Electronic Control Included
FAN COIL FAN COIL AERMEC mod. OMNIA UL 16c with electronic control included UL listed fan coil units for both horizontal and vertical installation UL-C : version with electronic thermostat and cabinet Model: OMNIA UL 16 C Cooling capacity: 1.20 - 0.71 kW Thermal power: 2.91 - 1.54 kW Water content: 0.5 litres Dimensions (HxWxD): 513 x 750 x 173 (mm) Plinth Height: 93 (mm) Weight: 13.5 kg White color - Coat RAL 9002 - Headboard and Plinths RAL 7044 General characteristics AERMEC OMNIA UL Fan coils for universal installation for residential use, for heating, cooling and dehumidification, which can be combined with any heat generator. Cooling and heating Wall installation Floor installation Centrifugal fan Centralized control Compatible with VMF (Variable Multi Flow) system For two-pipe systems The units of the OMNIA UL (Universal Line) series are fan coil units suitable for air conditioning. Available in various configurations depending on the installation position, with the possibility of being ducted, they are characterized by multi-speed motors. They have fans in ABS material with an impeller equipped with airfoil fins and an inspectable cochlea. This feature gives the machine a clear reduction in the level of noise emitted, as well as a reduction in the electrical absorption of the motor, compared to traditional fans with a metal structure. The UL unit, in the PC version, is equipped as standard with the PLASMACLUSTER ionizing filter, while the RADIANT version is equipped with a radiant plate with on/off motor or inverter. The units can be equipped with multiple accessories and can be integrated into the VMF - Aermec centralized hydronic management system. Versions: UL-S: version without controls, with cabinet. Compatible with the VMF system UL: version with switch and cabinet UL-C: version with electronic thermostat and cabinet UL-PC: version with electronic thermostat, Plasmacluster filter (can be installed on site only) and mobile Characteristics: Cleaning the fan: With Omnia fan coils you can easily clean the fan blades. Now, in fact, it is possible to open the cochlea of the fan (the casing that encloses the blades) and proceed with their periodic cleaning. Cleaning the condensate tray: Thanks to a new fixing system for the condensate collection tray, now, with Omnia fan coils, it can be cleaned easily. This important solution avoids, in the long term, the formation of bacteria, germs and molds in the basin itself, due to the condensation of the humidity present in the air Electrostatically precharged filter: Omnia fan coils are equipped, as standard, with electrostatically precharged air filters. These filters, thanks to their particular construction, absorb and retain suspended dust: the ideal system to ensure healthy air for the whole family. Silent operation: Thanks to the adoption of special centrifugal fans, the Omnia fan coils have extremely silent ventilation which takes these new fan coils to the top of acoustic comfort thanks to the absence of noise peaks UL listed fan coil units for wall or floor installation EUROVENT certification 3-speed centrifugal fan unit Maximum silence High design aesthetics with rounded lines Adjustable air distribution grille Automatic switch-off of the fan coil by closing the air distribution grille Small dimensions Electronic temperature regulation, automatic speed change on the fan, automatic season change and automatic on - off (version with thermostat) Reversibility of the hydraulic connections during installation Low pressure drop in the heat exchange coils Electric motors with permanently inserted capacitors Ease of installation and maintenance Easy to remove and clean air filter Electrostatically preloaded filter Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€440,00
-
Galletti Galletti Flat S Fan Coil Fan Coil 43 Kw 2.66
NB: MANDATORY ACCESSORY Condensate collection tray Galletti FLAT S Fan Coil Fan Coil 43 KW 2.66 Min-med-max total cooling output 1.76-2.14-2.78 kW Min-med-max heating output 2.21-2.66-3.42 kW Average nominal air flow 310 m3h Absorbed power (E) W 31 Overall sound power (E) dB(A) 42 Dimensions HxW mm 874x1160 ; 23 kgs NB: MANDATORY ACCESSORY Condensate collection tray FLAT Fan coil with 17 cm deep design cabinet The answer to new design requirements in the residential sector The FLAT series by Galletti becomes SLIM. In fact, with a depth of only 17 cm, FLAT S guarantees compact dimensions that make it easy to integrate into any context, thus responding to new design trends in the residential sector (and beyond). The FLAT S mini series means innovation in terms of design, to guarantee absolutely excellent sound performance with the advantage of an exclusive design that goes well with both residential and commercial use. The RAL9010 color design cover cabinet is small in size, made of sheet steel and UV stabilized ABS. The upper grille consists of a flap and adjustable fins, consisting of a microswitch which interrupts the operation of the unit when it is placed in the closed position. The adoption of UV-stabilised ABS in the parts that make up the cover cabinet and antistatic in the ventilation group (cochlea and centrifugal fan) guarantee the same aesthetic and acoustic performance throughout the life of the product. Design cabinet with a depth of 17 cm Microswitch on air flap » Use of UV stabilized ABS Can be integrated with ERGO Reversible hydraulic connections 3-speed motor Centrifugal fans in ABS Cover cabinet Design cover cabinet in RAL9010 colour, only 17 cm deep, front panel in sheet steel. Sides, upper grille and side doors made of UV stabilized ABS to keep the color unchanged over time. The upper grille consists of a flap and adjustable fins. The flap is equipped with a microswitch which interrupts the operation of the unit when it is placed in the closed position. Structure Made of thick galvanized steel sheet, thermally and acoustically insulated with class 1 self-extinguishing panels High efficiency heat exchange coil in copper tube and aluminum fins, equipped with brass manifolds and vent valve. The hydraulic connections are reversible during installation. On request, it is possible to mount an additional coil for 4-pipe systems. Double inlet centrifugal fans , statically and dynamically balanced, made of antistatic ABS with airfoil blades and staggered modules. The fans are housed in a high efficiency ABS scroll. Electric motor Mounted on anti-vibration supports, with permanently inserted capacitor and thermal protection of the windings, it is directly coupled to the fans. It is available with both 3 and 6 (On request) rotation speeds to meet all specific requests in terms of performance, silence and electricity consumption. Air filter Regenerable filter made of honeycomb polypropylene, easily removable for maintenance operations. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€345,00
You have seen 84 out of 204 products