Technical features Model : T FALKO HI-WALL 700 HW Code : THM07A Performance: Cooling Power: 3330 W Heating power: 4230 W Air Flow : 680 m 3 /h Water Flow : 9,7 ~ 12 l/min Sound Pressure Level : 37 ~ 43 dB(A) Characteristics: Power supply (V,Hz, Ø) : 220~240/50/1 Electric Consumption : 46 W Maximum Current : 0.25A Maximum pressure : 1.6MPa Installation data: Pipe diameter : 12.70 mm RC (1/2") Dimensions and weight: Internal Unit Dimensions (LxHxP): 850x300x198 mm Empty weight : 13 Kg IdealClima hydronic terminals FALKO Comfosplit Hydronic with Hydrosilence Technology. Silent and Advanced Solutions Falko HW is the hydronic terminal which, in compact dimensions and captivating aesthetics, contains technologies that are ideal for obtaining thermal and acoustic comfort in residential environments. In fact, Falko HW is distinguished by a high-performance heat exchange battery and a fan unit with a three-phase permanent magnet brushless motor controlled with current reconstructed according to a sine wave (the motor is thus called the "ECM" type): comfort and efficiency Elegant and Modern Design The Falko HW design, characterized by a white ABS front panel with elegant chromed details, is designed to integrate into any type of environment. The integrated air outlet is equipped with a motorized deflector. The front panel is complete with a display showing the operating status and the temperature. Supplied as standard, the infrared remote control allows control of the terminal and the setting of "night reduction". The tangential fan is low noise The effectiveness of hydronic rationality Falko HW represents the new generation of fan coils designed with the aim of offering performance and design at the top of its category. Falko HW also means innovation in terms of design, to guarantee absolutely excellent sound performance with the advantage of an exclusive design that goes well with both residential and commercial use. The design covering cabinet has a white color, with front panel, sides, upper grille and side doors made of stabilized ABS Hot and cold only when needed Falko HW guarantees, with its efficiency and quick response, the living comfort standards necessary for modern life, based on a discontinuous presence in homes. With a single appliance, both heating and cooling needs can be satisfied, especially in reversible heat pump systems Falko HW ensures higher quality of the air that is introduced into the environment, well filtered by the standard fine-mesh filter: in fact, it guarantees constant ventilation, which allows for greater cleaning of the air and considerable hygiene in the environments Easy to Install Falko HW can be installed easily, quickly and in any condition. In fact, it matches perfectly with the ordinary gas split predisposition boxes (H.int>10cm). The convenient sheet metal fixing plate also acts as a template for quick installation. The solid hinge that is obtained facilitates connection and allows easy maintenance (e.g. hydraulic system air vent) Semi-transparent display Elegant transparent display of the latest generation, does not interrupt the product lines Infrared receiver Managed with the standard remote control, with ease of installation and operation Elegant Finishes Refined details such as the soft lines and the thin chromed edge make it even more suitable for environments where nothing is left to chance High Power Even in the most thermally demanding situations, Falko is able to deliver all the power needed to guarantee comfort Characteristics Heating, cooling and dehumidifying environments. Emitting power with high efficiency at high as well as low flow temperatures (excellent for heat pump systems). Combine with both traditional boilers, as well as condensing boilers, solar systems and heat pumps Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Riello Design Inverter 21 b Fan Coil Fan Coil with brushless motor and on-board control panel Tangential fan coil with Brushless Inverter motor Vertical or horizontal installation (accessory) Dimensions HxWxD mm 580x960x130 Code 20116244 General characteristics Cooling capacity 7°C-12°C 2120 Thermal output 50°CW (2) 2775 Thermal efficiency 70°C-60°CW (3) 4670 Maximum air flow m3 /h (4) 389 Sound pressure dBA 43.1-25.3 Inverter design The INVERTER DESIGNS are Riello fan coils with DC Brushless Inverter motors. This technological solution allows for continuous variation from 0 to 100% of the air flow rate and consequently of the heating and cooling capacity. The INVERTER DESIGNS heat and cool any environment very quickly, it is possible to choose between two dedicated mappings: PERFORMANCE for commercial environments, which require high efficiency and great efficiency, and COMFORT to always maintain maximum silence in residential environments. Thanks to the use of DC Brushless motors, the DESIGN INVERTERS save up to 50% of electricity compared to fan coils with traditional motors (ON/OFF type). Like the whole HELIOTERM family, the DESIGN INVERTER range is characterized by an extremely slim aesthetic with a depth of only 13 cm. The range is available in 5 models in two colors (white and metallic grey), with cooling powers from 830 W up to 4560 W and hot powers from 1090 W up to 4860 W. The wide range of accessories and controls with a touch DISPLAY , support a wide range of applications. All versions can be installed vertically or horizontally (using a dedicated accessory), with connections on the left. The structure is made of galvanized sheet metal with sides in ABS in the white version, in silver sheet metal, the front delivery grille is in aluminium. - Ultra Slim aesthetics - Depth of 13cm - Two colors available - Units that can be installed both vertically and horizontally - Easy to install with connections on the left - Ease of disassembly and cleaning of the filters - Commands with Display Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product code 01852 Total cooling output (a) (E) kW 1.74 Water flow rate (a) l/h 302 Battery water content l 0.8 Maximum working pressure 10 bar Eurocone 3/4 inch hydraulic connections Max absorbed power (E) W 19 Sound power min-max 39/53 dB(A) Sound pressure (f) dB(A) 36 Power supply V/ph/Hz 230/1/50 Dimensions WxHxD 895x599x129mm SL Air inverter accessories TR (Touch Remote) control included Wall-mounted LCD programmable thermostat B0736 control for MODBUS, RS485 connection - optional Possibility of controlling up to 30 units. Desired temperature selection, operating mode, fan speed, manual/chronothermostat mode. Ambient probe inserted in the command. Backlit LCD display. Bi2 SL AIR Bi2® Air is the system terminal that heats, cools, dehumidifies and filters. Thanks to its integral design, just 12.9 cm thick, installing and maintaining the machine has never been easier! With the innovative integrated multiset control you also have maximum comfort always at hand. INTEGRAL DESIGN® Thanks to the essential design and the front body combined with the lateral sides, the installation and maintenance of Bi2 Air are simplified MULTISET CONTROL Integrated multiset electronics for touch use on board the machine or for universal dialogue with remote controls and home automation Characteristics: Heat, Cool, Dehumidify and Filter Integral aesthetics with suction from the lower side Front in metal, sides in ABS Compact: Thickness min 12.9 cm max 15 cm Range made up of 5 power models DC brushless motor Monobloc body for working in comfort Motorized steel air delivery flap Anti-intrusion grilles on the air intake and outlet Removable filters located on the air intake Remote control supplied TR CONTROL (Touch Remote): Touch control on the machine and remote control supplied. Through a selection of keys on the machine, it is possible to remote control* with wall remote control (chronothermostat code B0736, optional) or with home automation, through the Modbus RS485 signal protocol Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Riello Design Inverter 33 b Fan Coil Fan Coil with brushless motor and on-board control panel Tangential fan coil with Brushless Inverter motor Vertical or horizontal installation (accessory) Dimensions HxWxD mm 580x1160x130 Code 20116246 General characteristics Cooling capacity 7°C-12°C 3310 Thermal output 50°CW (2) 3905 Thermal efficiency 70°C-60°CW (3) 6635 Maximum air flow m3 /h (4) 560 Sound pressure dBA 45.5-25.6 Inverter design The INVERTER DESIGNS are Riello fan coils with DC Brushless Inverter motors. This technological solution allows for continuous variation from 0 to 100% of the air flow rate and consequently of the heating and cooling capacity. The INVERTER DESIGNS heat and cool any environment very quickly, it is possible to choose between two dedicated mappings: PERFORMANCE for commercial environments, which require high efficiency and great efficiency, and COMFORT to always maintain maximum silence in residential environments. Thanks to the use of DC Brushless motors, the DESIGN INVERTERS save up to 50% of electricity compared to fan coils with traditional motors (ON/OFF type). Like the whole HELIOTERM family, the DESIGN INVERTER range is characterized by an extremely slim aesthetic with a depth of only 13 cm. The range is available in 5 models in two colors (white and metallic grey), with cooling powers from 830 W up to 4560 W and hot powers from 1090 W up to 4860 W. The wide range of accessories and controls with a touch DISPLAY , support a wide range of applications. All versions can be installed vertically or horizontally (using a dedicated accessory), with connections on the left. The structure is made of galvanized sheet metal with sides in ABS in the white version, in silver sheet metal, the front delivery grille is in aluminium. - Ultra Slim aesthetics - Depth of 13cm - Two colors available - Units that can be installed both vertically and horizontally - Easy to install with connections on the left - Ease of disassembly and cleaning of the filters - Commands with Display Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENZIONE! NON DOTATO DI PIEDINI DI APPOGGIO. Caratteristiche tecniche Modello : CRC 43 MV Codice prodotto : 0066004 Numero di tubi : 2 Accessori Da abbinare obbligatoriamente per il corretto funzionamento, selezionare nel menù a tendina Comando CB a 3 Velocità 9066300 Comando CT-B 3 Velocità + Termostato Elettrico e Commutatore 9066301 Piedini di appoggio : 9066351 Performance Portata aria : 265 ~ 335 ~ 485 m3/h Raffreddamento resa totale : 1,71 ~ 2,11 ~ 2,83 kW Raffreddamento resa sensibile : 1,26 ~ 1,57 ~ 2,15  kW Riscaldamento : 1,74 ~ 2,18~ 2,97 kW Riscaldamento - Acqua 70-60 °C : 3,51 ~ 4,36 ~ 6,00 kW Dp Raffreddamento : 11,2 ~ 16,2 ~ 27,2 kPa Dp Riscaldamento : 9,5 ~ 14,0 ~ 24,3 kPa Alimentazione (V,Hz,Ø) : 220~240/50/1 Livello potenza sonora : 33 ~ 39 ~ 47 dB(A) Livello pressione sonora : 24 ~ 30 ~ 38 dB(A) Dimensioni Dimensioni (AxLxP) : 530x670x225 mm Sabiana Carisma Ventilconvettore centrifugo con motore elettrico asincrono Carisma è il risultato di un grande impegno di energie e risorse, avente l'obiettivo di offrire un prodotto all'avanguardia in termini di design, prestazioni, silenziosità, consumo e funzionalità.Offerto con ventilatore centrifugo o con ventilatore tangenziale, viene proposto in cinque versioni differenti, a parete o soffitto, in vista o ad incasso, con una gamma molto versatile certificata dal Marchio Eurovent.Tutti i modelli hanno gruppi ventilanti con consumi elettrici particolarmente ridotti, sino al 40% in meno della serie precedente, e con la possibilità di poter essere collegati scegliendo tre tra sei differenti velocità di rotazione. Una serie completa di accessori e di comandi di regolazione e controllo,  permette di soddisfare qualsiasi esigenza di climatizzazione di ambienti residenziali, alberghi ed uffici. La serie CRC con ventilatore centrifugo si compone di 5 versioni, 9 grandezze, 18 modelli con singola batteria e 27 modelli con doppia batteria, con portate d'aria che variano da 100 a 1500 m3/h, rese termiche da 0,8 a 9 kW, rese frigorifere da 0,6 a 7,6 kW. Mobile di copertura È composto da robuste spalle laterali in materiale sintetico antiurto e da una sezione frontale in lamiera d’acciaio zincata a caldo e preverniciata. La griglia di mandata dell’aria, in materiale sintetico, è di tipo reversibile ad alette fisse ed è posizionata sulla parte superiore. Struttura interna portante In lamiera zincata, spessore 1 mm, composta da due spalle laterali e da una parete posteriore isolate con materassino, spessore 3 mm, in polietilene a cellule chiuse B‐s2‐d0 EN 13501‐1. Filtro Rigenerabile in polipropilene a nido d’ape. Il telaio, in lamiera zincata, è inserito in guide fissate sulla struttura interna che permettono una facile estrazione. Una copertura frontale del filtro, in materiale plastico dello stesso colore della griglia di mandata, evidenzia la presenza dello stesso. Gruppo ventilante Costituito da ventilatori centrifughi a doppia aspirazione, particolarmente silenziosi, con giranti in alluminio o materiale plastico bilanciate staticamente e dinamicamente, direttamente calettate sull’albero motore Motore elettrico Di tipo monofase, a sei velocità di cui tre collegate, montato su supporti elastici antivibranti e con condensatore permanentemente inserito, protezione termica interna a riarmo automatico, grado di protezione IP 20 e classe B. Batteria di scambio termico È costruita con tubi di rame ed alette in alluminio fissate ai tubi con procedimento di mandrinatura meccanica. La batteria principale e l’eventuale batteria addizionale sono dotate di due attacchi Ø 1/2” gas femmina. I collettori sono corredati di sfoghi d’aria e di scarichi d’acqua Ø 1/8” gas. Lo scambiatore non è adatto ad essere utilizzato in atmosfere corrosive o in tutti quegli ambienti in cui si possano generare corrosioni nei confronti dell’alluminio La posizione di serie degli attacchi idraulici è sul lato sinistro guardando l’apparecchio di fronte.Le batterie sono di tipo reversibile: il lato degli attacchi può perciò essere invertito in fase di montaggio in cantiere. Bacinella raccolta condensa In materiale plastico, realizzata a forma di L e fissata alla struttura interna; nella versione MO-MVB ed IV-IO la bacinella è isolata con materassino, spessore 3 mm, in polietilene a cellule chiuse B‐s2‐d0 EN 13501‐1. Il tubo di scarico condensa è Ø 15 esterno. Garanzia prodotto : La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

ATTENZIONE! NON DOTATO DI PIEDINI DI APPOGGIO. Caratteristiche tecniche Modello : CRC 63 MV Codice prodotto : 0066006 Numero di tubi : 2 Accessori Da abbinare obbligatoriamente per il corretto funzionamento, selezionare nel menù a tendina Comando CB a 3 Velocità 9066300 Comando CT-B 3 Velocità + Termostato Elettrico e Commutatore 9066301 Piedini di appoggio : 9066351 Performance Portata aria : 415 ~ 590 ~ 760 m3/h Raffreddamento resa totale : 2,50 ~ 3,32 ~ 4,01 kW Raffreddamento resa sensibile : 1,87 ~ 2,54 ~ 3,12  kW Riscaldamento : 2,56 ~ 3,45 ~ 4,26 kW Riscaldamento - Acqua 70-60 °C : 5,17 ~ 6,96 ~ 8,61 kW Dp Raffreddamento : 8,6 ~ 14,1 ~ 19,8 kPa Dp Riscaldamento : 7,3 ~ 12,3 ~ 17,8 kPa Alimentazione (V,Hz,Ø) : 220~240/50/1 Livello potenza sonora : 37 ~ 46 ~ 52 dB(A) Livello pressione sonora : 28 ~ 37 ~ 43 dB(A) Dimensioni Dimensioni (AxLxP) : 530x670x225 mm Sabiana Carisma Ventilconvettore centrifugo con motore elettrico asincrono Carisma è il risultato di un grande impegno di energie e risorse, avente l'obiettivo di offrire un prodotto all'avanguardia in termini di design, prestazioni, silenziosità, consumo e funzionalità.Offerto con ventilatore centrifugo o con ventilatore tangenziale, viene proposto in cinque versioni differenti, a parete o soffitto, in vista o ad incasso, con una gamma molto versatile certificata dal Marchio Eurovent.Tutti i modelli hanno gruppi ventilanti con consumi elettrici particolarmente ridotti, sino al 40% in meno della serie precedente, e con la possibilità di poter essere collegati scegliendo tre tra sei differenti velocità di rotazione. Una serie completa di accessori e di comandi di regolazione e controllo,  permette di soddisfare qualsiasi esigenza di climatizzazione di ambienti residenziali, alberghi ed uffici. La serie CRC con ventilatore centrifugo si compone di 5 versioni, 9 grandezze, 18 modelli con singola batteria e 27 modelli con doppia batteria, con portate d'aria che variano da 100 a 1500 m3/h, rese termiche da 0,8 a 9 kW, rese frigorifere da 0,6 a 7,6 kW. Mobile di copertura È composto da robuste spalle laterali in materiale sintetico antiurto e da una sezione frontale in lamiera d’acciaio zincata a caldo e preverniciata. La griglia di mandata dell’aria, in materiale sintetico, è di tipo reversibile ad alette fisse ed è posizionata sulla parte superiore. Struttura interna portante In lamiera zincata, spessore 1 mm, composta da due spalle laterali e da una parete posteriore isolate con materassino, spessore 3 mm, in polietilene a cellule chiuse B‐s2‐d0 EN 13501‐1. Filtro Rigenerabile in polipropilene a nido d’ape. Il telaio, in lamiera zincata, è inserito in guide fissate sulla struttura interna che permettono una facile estrazione. Una copertura frontale del filtro, in materiale plastico dello stesso colore della griglia di mandata, evidenzia la presenza dello stesso. Gruppo ventilante Costituito da ventilatori centrifughi a doppia aspirazione, particolarmente silenziosi, con giranti in alluminio o materiale plastico bilanciate staticamente e dinamicamente, direttamente calettate sull’albero motore Motore elettrico Di tipo monofase, a sei velocità di cui tre collegate, montato su supporti elastici antivibranti e con condensatore permanentemente inserito, protezione termica interna a riarmo automatico, grado di protezione IP 20 e classe B. Batteria di scambio termico È costruita con tubi di rame ed alette in alluminio fissate ai tubi con procedimento di mandrinatura meccanica. La batteria principale e l’eventuale batteria addizionale sono dotate di due attacchi Ø 1/2” gas femmina. I collettori sono corredati di sfoghi d’aria e di scarichi d’acqua Ø 1/8” gas. Lo scambiatore non è adatto ad essere utilizzato in atmosfere corrosive o in tutti quegli ambienti in cui si possano generare corrosioni nei confronti dell’alluminio La posizione di serie degli attacchi idraulici è sul lato sinistro guardando l’apparecchio di fronte.Le batterie sono di tipo reversibile: il lato degli attacchi può perciò essere invertito in fase di montaggio in cantiere. Bacinella raccolta condensa In materiale plastico, realizzata a forma di L e fissata alla struttura interna; nella versione MO-MVB ed IV-IO la bacinella è isolata con materassino, spessore 3 mm, in polietilene a cellule chiuse B‐s2‐d0 EN 13501‐1. Il tubo di scarico condensa è Ø 15 esterno. Garanzia prodotto : La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

GALLETTI ESTRO F8L FAN COIL FAN COIL 4.33 KW Model : ESTRO F8L Fan coils for exposed wall installation with cover cabinet with vertical air outlet Dimensions: 1194 x 564 x 226mm Product pluses: 3/6 speed motor Eurovent certification Steel / ABS cabinet Reversible hydraulic connections Centrifugal fans in ABS (E) = EUROVENT certified performance, an independent body recognized at European level, which ensures total reliability and transparency of performance and sound level Cockerels Estro The widest range of fan coils on the market combined with Galletti technology, quality and reliability The ESTRO series is absolutely the line of fan coils on the market with the widest range of models and accessories capable of satisfying all the needs of professionals in the sector. The range consists of 20 models made in 9 construction versions. For the realization of the ESTRO project, high quality materials were chosen which, together with the great care and attention given to the assembly of the main components, qualify it in the field of performance reliability and acoustic comfort. The ESTRO line has a constructive concept that allows the models for vertical installation to be unified with those for horizontal installation: versions are made for surface mounting on the wall, floor/ceiling, recessed wall/ceiling, and lowered floor. In the built-in ductable version, ESTRO has a series of accessories that allow quick and economical installation with flexible ducts directly coupled to air diffusion grilles. ESTRO can be associated with a range of on-board or wall-mounted control panels made up of over 20 options depending on the level of regulation and comfort required. An innovative air ionization system guarantees the sanitization of the terminal and the deodorization of the ambient air. Estrus FL Version with cover cabinet suitable for wall-mounted installation. Vertical air outlet, air intake filter locked to the cabinet with ¼ turn screws. ESTRO FL is available in 20 models. Technical characteristics of the main components: Rounded shapes and colors that integrate perfectly with current furnishing criteria, in compliance with architectural requirements. Cover cabinet made up of a thick steel sheet panel (10/10 mm); side panels and delivery grille (adjustable by 180°) are made of ABS. The side doors allow access to the technical compartments. Structure in thick galvanized steel sheet (up to 15/10 mm), insulated with class 1 self-extinguishing thermal insulating panels. The FU – FB – FC – FF and FBC versions are equipped with a double tray for collecting the condensate. High efficiency heat exchange coil, in copper pipe and aluminum fins locked to the pipes by mechanical expansion, it is equipped with brass manifolds and vent valve. The battery, normally mounted with connections on the left, can be rotated by 180°. Three or six-speed electric motor mounted on anti-vibration supports, with permanently inserted capacitor and thermal protection of the windings. Double inlet centrifugal fans, statically and dynamically balanced and coupled directly to the electric motor, made of antistatic ABS with airfoil blades and staggered modules Regenerable air filter in honeycomb polypropylene, mounted on a galvanized sheet frame with protection net, easily removable for maintenance operations. The filter is locked to the cover cabinet by means of 1/4 turn screws (model 12 excluded). Control panels, available as an accessory, for controlling and regulating the temperature by means of a microprocessor system, which automatically adjusts the operation of the fan coil as the ambient conditions vary. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : T FALKO HI-WALL 500 HW Code : THM05A Performance: Cooling Power: 2570 W Heating power: 3265 W Air Flow : 510 m 3 /h Water Flow : 7.5 ~ 9.3 l/min Sound Pressure Level : 36 ~ 42 dB(A) Characteristics: Power supply (V,Hz, Ø) : 220~240/50/1 Electric Consumption : 31 W Maximum Current : 0.18A Maximum pressure : 1.6MPa Installation data: Pipe diameter : 12.70 mm RC (1/2") Dimensions and weight: Internal Unit Dimensions (LxHxP): 850x300x198 mm Empty weight: 12 Kg IdealClima hydronic terminals FALKO Comfosplit Hydronic with Hydrosilence Technology. Silent and Advanced Solutions Falko HW is the hydronic terminal which, in compact dimensions and captivating aesthetics, contains technologies that are ideal for obtaining thermal and acoustic comfort in residential environments. In fact, Falko HW is distinguished by a high-performance heat exchange battery and a fan unit with a three-phase permanent magnet brushless motor controlled with current reconstructed according to a sine wave (the motor is thus called the "ECM" type): comfort and efficiency Elegant and Modern Design The Falko HW design, characterized by a white ABS front panel with elegant chromed details, is designed to integrate into any type of environment. The integrated air outlet is equipped with a motorized deflector. The front panel is complete with a display showing the operating status and the temperature. Supplied as standard, the infrared remote control allows control of the terminal and the setting of "night reduction". The tangential fan is low noise The effectiveness of hydronic rationality Falko HW represents the new generation of fan coils designed with the aim of offering performance and design at the top of its category. Falko HW also means innovation in terms of design, to guarantee absolutely excellent sound performance with the advantage of an exclusive design that goes well with both residential and commercial use. The design covering cabinet has a white color, with front panel, sides, upper grille and side doors made of stabilized ABS Hot and cold only when needed Falko HW guarantees, with its efficiency and quick response, the living comfort standards necessary for modern life, based on a discontinuous presence in homes. With a single appliance, both heating and cooling needs can be satisfied, especially in reversible heat pump systems Falko HW ensures higher quality of the air that is introduced into the environment, well filtered by the standard fine-mesh filter: in fact, it guarantees constant ventilation, which allows for greater cleaning of the air and considerable hygiene in the environments Easy to Install Falko HW can be installed easily, quickly and in any condition. In fact, it matches perfectly with the ordinary gas split predisposition boxes (H.int>10cm). The convenient sheet metal fixing plate also acts as a template for quick installation. The solid hinge that is obtained facilitates connection and allows easy maintenance (e.g. hydraulic system air vent) Semi-transparent display Elegant transparent display of the latest generation, does not interrupt the product lines Infrared receiver Managed with the standard remote control, with ease of installation and operation Elegant Finishes Refined details such as the soft lines and the thin chromed edge make it even more suitable for environments where nothing is left to chance High Power Even in the most thermally demanding situations, Falko is able to deliver all the power needed to guarantee comfort Characteristics Heating, cooling and dehumidifying environments. Emitting power with high efficiency at high as well as low flow temperatures (excellent for heat pump systems). Combine with both traditional boilers, as well as condensing boilers, solar systems and heat pumps Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENZIONE! NON DOTATO DI PIEDINI DI APPOGGIO. Caratteristiche tecniche Modello : CRC 73 MV Codice prodotto : 0066007 Numero di tubi : 2 Accessori Da abbinare obbligatoriamente per il corretto funzionamento, selezionare nel menù a tendina Comando CB a 3 Velocità 9066300 Comando CT-B 3 Velocità + Termostato Elettrico e Commutatore 9066301 Piedini di appoggio : 9066351 Performance Portata aria : 535 ~ 735 ~ 925 m3/h Raffreddamento resa totale : 3,29 ~ 4,21 ~ 5,01 kW Raffreddamento resa sensibile : 2,45 ~ 3,19 ~ 3,85  kW Riscaldamento : 3,34 ~ 4,33 ~ 5,23 kW Riscaldamento - Acqua 70-60 °C : 6,72 ~ 8,73 ~ 10,55 kW Dp Raffreddamento : 16,2 ~ 25,1 ~ 34,2 kPa Dp Riscaldamento : 13,5 ~ 21,3 ~ 29,7 kPa Alimentazione (V,Hz,Ø) : 220~240/50/1 Livello potenza sonora : 42 ~ 51 ~ 56 dB(A) Livello pressione sonora : 33 ~ 42 ~ 47 dB(A) Dimensioni Dimensioni (AxLxP) : 530x670x225 mm Sabiana Carisma Ventilconvettore centrifugo con motore elettrico asincrono Carisma è il risultato di un grande impegno di energie e risorse, avente l'obiettivo di offrire un prodotto all'avanguardia in termini di design, prestazioni, silenziosità, consumo e funzionalità.Offerto con ventilatore centrifugo o con ventilatore tangenziale, viene proposto in cinque versioni differenti, a parete o soffitto, in vista o ad incasso, con una gamma molto versatile certificata dal Marchio Eurovent.Tutti i modelli hanno gruppi ventilanti con consumi elettrici particolarmente ridotti, sino al 40% in meno della serie precedente, e con la possibilità di poter essere collegati scegliendo tre tra sei differenti velocità di rotazione. Una serie completa di accessori e di comandi di regolazione e controllo,  permette di soddisfare qualsiasi esigenza di climatizzazione di ambienti residenziali, alberghi ed uffici. La serie CRC con ventilatore centrifugo si compone di 5 versioni, 9 grandezze, 18 modelli con singola batteria e 27 modelli con doppia batteria, con portate d'aria che variano da 100 a 1500 m3/h, rese termiche da 0,8 a 9 kW, rese frigorifere da 0,6 a 7,6 kW. Mobile di copertura È composto da robuste spalle laterali in materiale sintetico antiurto e da una sezione frontale in lamiera d’acciaio zincata a caldo e preverniciata. La griglia di mandata dell’aria, in materiale sintetico, è di tipo reversibile ad alette fisse ed è posizionata sulla parte superiore. Struttura interna portante In lamiera zincata, spessore 1 mm, composta da due spalle laterali e da una parete posteriore isolate con materassino, spessore 3 mm, in polietilene a cellule chiuse B‐s2‐d0 EN 13501‐1. Filtro Rigenerabile in polipropilene a nido d’ape. Il telaio, in lamiera zincata, è inserito in guide fissate sulla struttura interna che permettono una facile estrazione. Una copertura frontale del filtro, in materiale plastico dello stesso colore della griglia di mandata, evidenzia la presenza dello stesso. Gruppo ventilante Costituito da ventilatori centrifughi a doppia aspirazione, particolarmente silenziosi, con giranti in alluminio o materiale plastico bilanciate staticamente e dinamicamente, direttamente calettate sull’albero motore Motore elettrico Di tipo monofase, a sei velocità di cui tre collegate, montato su supporti elastici antivibranti e con condensatore permanentemente inserito, protezione termica interna a riarmo automatico, grado di protezione IP 20 e classe B. Batteria di scambio termico È costruita con tubi di rame ed alette in alluminio fissate ai tubi con procedimento di mandrinatura meccanica. La batteria principale e l’eventuale batteria addizionale sono dotate di due attacchi Ø 1/2” gas femmina. I collettori sono corredati di sfoghi d’aria e di scarichi d’acqua Ø 1/8” gas. Lo scambiatore non è adatto ad essere utilizzato in atmosfere corrosive o in tutti quegli ambienti in cui si possano generare corrosioni nei confronti dell’alluminio La posizione di serie degli attacchi idraulici è sul lato sinistro guardando l’apparecchio di fronte.Le batterie sono di tipo reversibile: il lato degli attacchi può perciò essere invertito in fase di montaggio in cantiere. Bacinella raccolta condensa In materiale plastico, realizzata a forma di L e fissata alla struttura interna; nella versione MO-MVB ed IV-IO la bacinella è isolata con materassino, spessore 3 mm, in polietilene a cellule chiuse B‐s2‐d0 EN 13501‐1. Il tubo di scarico condensa è Ø 15 esterno. Garanzia prodotto : La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Technical features Model : IKARO HI-WALL 350 HW Code : THE03D Performance: Cooling Power: 1689 W Heating power: 2069 W Air Flow : 340 m 3 /h Water Flow : 4.83 ~ 5.9 l/min Sound Pressure Level : 16 ~ 21 dB(A) Characteristics: Power supply (V,Hz, Ø) : 220~240/50/1 Power Consumption: 18.3W Maximum Current : 0.16A Maximum pressure : 1.6MPa Installation data: Pipe diameter : 12.70 mm RC (1/2") Dimensions and weight: Internal Unit Dimensions (LxHxP): 850x300x198 mm Empty weight : 13 Kg IdealClima IKARO Hydronic Comfosplit Hydronic Terminals with Hydrosilence Technology. Silent and Advanced Solutions Ikaro is the wall-mounted hydronic terminal equipped with the exclusive HydroSilence technology, for unparalleled acoustic and thermal comfort. Specifically designed for residential applications, Ikaro encloses the best PID thermal and electronic technology in a compact and elegant form. Ideal in heat pump systems, and in renewable systems, including solar ones. Quick and effective, it heats, cools and dehumidifies in complete silence The Value of Silence It can deliver the ideal thermal power with unsurpassed silence thanks to the HydroSilence technology. As the desired temperature approaches, the electronic control reduces sound emission and air flows to imperceptible levels, maintaining ideal efficiency in both heating and cooling. Heats, cools and dehumidifies With 5 powers available from 1.1 to 3.3 kW in cooling and from 1.3 to 4.2 kW in heating, Ikaro is the complete solution for hydronic air conditioning, advantageous in systems with modern reversible heat pumps. The dehumidifying effect adds well-being to the rooms in summer. Ikaro has 5 sizes of silence With 5 models available, the choice of Ikaro can be made with extreme flexibility. Even important thermal loads can be satisfied with silence. For example, the 2 KW power Ikaro HW 350 has a noise level of 18 dB at medium speed, the 1.3 KW power Ikaro HW 180 is distinguished by a noise level of only 11 dB Compact, Elegant and Universal Ikaro's design is developed to find a place in the most elegant residential environments: with particular attention also to compactness (less than just 90cm wide). Furthermore, Ikaro can be universally installed with common predisposition boxes for gas splits (h.int>10cm). The convenient fixing plate, which facilitates installation and maintenance thanks to the "tilting hinge" joint, remains completely invisible The modern concept of comfort in domestic environments extends beyond climatic aspects to also include acoustics Hydro Silence technology It is the result of an innovation process aimed at making the consolidated efficiency of hydronic air conditioning integrated with the modern concept of not only climatic comfort, but especially acoustic comfort, indispensable in domestic environments. HydroSilence controls, modulates and actuates in unison the tangential fan unit, the high efficiency coil, the cross-flow technology and the refined electronics with PID algorithms for a unique combination of silence and performance Versatility of Control Each Ikaro can be managed in complete autonomy thanks to the practical infrared remote control supplied as standard, and to the captivating transparent LCD display which shows the temperature at all times. For an even more articulated control, for example within home automation systems, Ikaro is equipped with Modbus connectivity as standard. Ikaro finds its ideal insertion in Integra Benessere, the simple and advanced TermoDomotica by Ideal Clima which allows the control of all the system devices to govern domestic comfort to optimize efficiency and reduce consumption. From the Integra Touch touch screen panel it is possible to control, from a single point, all the functions of the house: air conditioning, hydronic or radiant, controlled ventilation, dehumidification and air quality. The pressure of a finger is enough to operate several devices at the same time or to set the temperature in every room of the house. With a simple and intuitive interface, integrated into the environment and thanks to the capacitive touch screen interaction with "gestures" habitual with the diffusion of tablets and smartphones. Characteristics Hydrosilence technology for unparalleled acoustic comfort. Cross-flow tangential fan. Inverter motors with modulating technology and PID adaptive algorithm . Universal wall-mountability, even with the common predisposition boxes for gas splits (internal height >10cm). Wide range of accessories, such as the 2 and 3-way kits that can be installed on the machine Numerous control options , from the standard remote control to Modbus connectivity and Integra Benessere Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : IKARO HI-WALL 500 HW Code : THE05D Performance: Cooling Power: 2570 W Heating power: 3260 W Air Flow : 520 m 3 /h Water Flow : 7.92 ~ 9.3 l/min Sound Pressure Level : 23 ~ 27 dB(A) Characteristics: Power supply (V,Hz, Ø) : 220~240/50/1 Electric Consumption : 28 W Maximum Current : 0.2A Maximum pressure : 1.6MPa Installation data: Pipe diameter : 12.70 mm RC (1/2") Dimensions and weight: Internal Unit Dimensions (LxHxP): 850x300x198 mm Empty weight : 13 Kg IdealClima IKARO Hydronic Comfosplit Hydronic Terminals with Hydrosilence Technology. Silent and Advanced Solutions Ikaro is the wall-mounted hydronic terminal equipped with the exclusive HydroSilence technology, for unparalleled acoustic and thermal comfort. Specifically designed for residential applications, Ikaro encloses the best PID thermal and electronic technology in a compact and elegant form. Ideal in heat pump systems, and in renewable systems, including solar ones. Quick and effective, it heats, cools and dehumidifies in complete silence The Value of Silence It can deliver the ideal thermal power with unsurpassed silence thanks to the HydroSilence technology. As the desired temperature approaches, the electronic control reduces sound emission and air flows to imperceptible levels, maintaining ideal efficiency in both heating and cooling. Heats, cools and dehumidifies With 5 powers available from 1.1 to 3.3 kW in cooling and from 1.3 to 4.2 kW in heating, Ikaro is the complete solution for hydronic air conditioning, advantageous in systems with modern reversible heat pumps. The dehumidifying effect adds well-being to the rooms in summer. Ikaro has 5 sizes of silence With 5 models available, the choice of Ikaro can be made with extreme flexibility. Even important thermal loads can be satisfied with silence. For example, the 2 KW power Ikaro HW 350 has a noise level of 18 dB at medium speed, the 1.3 KW power Ikaro HW 180 is distinguished by a noise level of only 11 dB Compact, Elegant and Universal Ikaro's design is developed to find a place in the most elegant residential environments: with particular attention also to compactness (less than just 90cm wide). Furthermore, Ikaro can be universally installed with common predisposition boxes for gas splits (h.int>10cm). The convenient fixing plate, which facilitates installation and maintenance thanks to the "tilting hinge" joint, remains completely invisible The modern concept of comfort in domestic environments extends beyond climatic aspects to also include acoustics Hydro Silence technology It is the result of an innovation process aimed at making the consolidated efficiency of hydronic air conditioning integrated with the modern concept of not only climatic comfort, but especially acoustic comfort, indispensable in domestic environments. HydroSilence controls, modulates and actuates in unison the tangential fan unit, the high efficiency coil, the cross-flow technology and the refined electronics with PID algorithms for a unique combination of silence and performance Versatility of Control Each Ikaro can be managed in complete autonomy thanks to the practical infrared remote control supplied as standard, and to the captivating transparent LCD display which shows the temperature at all times. For an even more articulated control, for example within home automation systems, Ikaro is equipped with Modbus connectivity as standard. Ikaro finds its ideal insertion in Integra Benessere, the simple and advanced TermoDomotica by Ideal Clima which allows the control of all the system devices to govern domestic comfort to optimize efficiency and reduce consumption. From the Integra Touch touch screen panel it is possible to control, from a single point, all the functions of the house: air conditioning, hydronic or radiant, controlled ventilation, dehumidification and air quality. The pressure of a finger is enough to operate several devices at the same time or to set the temperature in every room of the house. With a simple and intuitive interface, integrated into the environment and thanks to the capacitive touch screen interaction with "gestures" habitual with the diffusion of tablets and smartphones. Characteristics Hydrosilence technology for unparalleled acoustic comfort. Cross-flow tangential fan. Inverter motors with modulating technology and PID adaptive algorithm . Universal wall-mountability, even with the common predisposition boxes for gas splits (internal height >10cm). Wide range of accessories, such as the 2 and 3-way kits that can be installed on the machine Numerous control options , from the standard remote control to Modbus connectivity and Integra Benessere Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! THE PRODUCT IS MADE TO ORDER AND WILL BE SHIPPED IN 10 WORKING DAYS Technical features Indoor unit catalog code : FWT04GT 2-pipe version Optional Commands: Wired control Standard : MERCA Simplified wired control : SRC-HPA Infrared remote control : WRC-HPC Energy efficiency: FCEER : D FCCOP : C Performance: Cooling Capacity : 2.52 ~ 3.27 kW Heating capacity : 2.75 ~ 3.71 kW Absorbed power: 0.04 kW Treated Air Indoor Unit : 442 ~ 629 m 3 /h Water flow rate: 570 l/h Total Sound Power Level : 45 ~ 55 dB(A) Sound Pressure Level Indoor Unit : 39 ~ 42 dB(A) Characteristics: Power supply (V,Hz, Ø) : 220~240/50/1 Condensate Pipe Diameter: 19 mm Dimensions and weight: Internal Unit Dimensions (HxWxD): 288x800x206 mm Indoor Unit Weight: 9.0 Kg Daikin FWT-GT Fan Coil Unit AC fan motor for wall installation Elegant case design Optimal air distribution Easy to install Infrared remote control up to 9m 3-speed fan motor Wide operating range Low noise during operation thanks to the tangential fan Class 1 self-extinguishing thermal insulation Removable and washable air filter (self-extinguishing class 1) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less