icon Stoves and fireplaces | CaldaieMurali

Stoves and fireplaces

Stufe e Camini
Add a touch of warmth and charm to your home with our stoves and fireplaces. Elegant design, efficient performance and welcoming atmosphere. Choose from our selection of stoves and fireplaces to create a lovely focal point and warm up your space in style.

415 products


  • immagine-1-la-nordica-termostufa-a-legna-la-nordica-extraflame-mod.-termoisotta-con-sistema-d.s.a.-15-kw-nero-antracite

    La Nordica Wood Heating Stove La Nordica Extraflame Mod. Termoisotta With DSA System 15 Kw Black Anthracite

    A 10% DEPOSIT IS REQUIRED FOR THE PURCHASES OF STOVES ON DELIVERY Technical features Dimensions : 760x775x520mm Net weight : 212 kg Fire mouth dimensions: 519x340 mm Fireplace dimensions: 570x300x325 mm Smoke outlet diameter: 150 mm sup Hearth : Cast Iron-Ironker heated m3: 430 m3 Power rendered to the liquid: 8.5 kW Ambient output power: 6.5 kW Nominal thermal power useful : 15 kW Overall thermal power: 19.1 kW Exchanger fluid content: 14.5 l Operating pressure : 3 bar Optimum working temperature: 70°-75°C Ø Boiler connection: 1" F Gas Regulated primary air : Yes Secondary air reg. : Yes Tertiary air pret. : Yes Efficiency : 78.4% Hourly consumption : 4.4 kg/h Draft : 1.7/2.0 mm General characteristics WOOD STOVES The particular attention aimed at protecting the environment and total respect for the ecosystem were the inputs that prompted La NORDICA-EXTRAFLAME to make large investments in product research and development, thus allowing for very high yields and low consumption, using only wood , fuel that is produced by nature and which returns to it through a perpetual circular flow. Our country has large wooded areas, and is therefore able to offer a varied quantity of wood. By using this resource, you can reap significant benefits: Environmental plan: In nature, it has been proven that wood, when it completes the decomposition cycle, releases a quantity of CO2 (carbon dioxide) into the atmosphere which is then used for the regrowth and development of new plants. Economic plan: 2.3Kg of dry wood have a calorific value equal to 1lt of diesel or 1m3 of natural gas. Given the equal benefit, only the cost varies, which for the purchase of wood will be 50-60% lower than for other fuels. THERMAL INSULATION From the elegantly classic line, connected to a thermo-sanitary system, it also allows you to heat the radiators of your home with the healthy and clean heat from the wood. With integrated DSA system ( possibility of producing domestic hot water by connecting the thermo-cooker to a boiler) Entirely in enamelled cast iron Ceramic glass resistant up to 750 °C Thanks to the thermo-sanitary system, it heats the whole house. Wood stove technologies: POST COMBUSTION SYSTEM the combustion system developed by La Nordica-Extraflame allows, thanks to a secondary/tertiary air system, a post-combustion capable of drastically reducing emissions and therefore complying with the most restrictive European regulations RESISTANT DOOR AT THE TIME the doors of La Nordica-Extraflame products are made of high quality cast iron. This material, even if subjected to strong thermal stresses, does not undergo expansion or alteration of its shape. CLEAN GLASS CONTROL it is a system which effectively avoids the formation of deposits on the glass of the fire door through a specific path of preheated air AUTOMATIC SAFETY DEVICE it is a safety device for abruptly lowering the water temperature according to current regulations. This allows the installation of a solid fuel appliance (wood) with a closed expansion vessel

    €2.124,00

  • immagine-1-ctm-termocamino-a-legna-ctm-basic-30-kw-scomparsa-verticale-con-produzione-acqua-calda-sanitaria-acs

    CTM Wood Burning Fireplace Ctm Basic 30 Kw Disappearing Vertical With Domestic Hot Water Production Acs

    CTM BASIC 30 kW vertical disappearing wood-burning fireplace with DHW domestic hot water production Model: BASIC 30 WITH DHW CHARACTERISTICS: Overall power output: 27.57 kW Fuel: Wood Power delivered to water: 19.54 kW Yield to water % 71 Boiler water content 85 l Heatable surface* 220 m2 Flue diameter mm 250 3/8 inch DHW inlet/outlet/thermal discharge Weight : 315Kg * The data are to be considered indicative on the basis of the average Italian building typology; even significant variations can be found in the presence of buildings with different construction characteristics and energy needs. CTM BASIC The BASIC series fireplace stoves, offered exclusively by the CTM brand, are ecological, functional, simple to use and install heat generators and yet characterized by high technological contents, high yields and low consumption. Proposed in the version with flat vertical retractable door, with and without the integrated production of domestic hot water, with the combustion surface entirely made of refractory material, with chrome finishes (standard) or optional, BASIC will guarantee the energy supply necessary for the your home and your central heating system as well as brighten your days with the warmth of a spectacular flame. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    €2.171,00

  • immagine-1-qlima-stufa-a-raggi-infrarossi-gpl-grigia-tectro-242-ean-8713508773254

    Qlima Gray LPG Infrared Rays Stove Tectro 242

    MAX HEATING CAPACITY (W):4200. HEATING CAPACITY (W) MIN:1400. FOR ROOMS UP TO (M2)MAX:54.FOR ROOMS UP TO (M3) MAX:135. TANK CAPACITY (KG):15. MAX GAS CONSUMPTION (KG/H): 0.305. MIN GAS CONSUMPTION (KG/H): 0.1. YEAR WARRANTY: 2. EQUIPPED WITH OXYGEN DETECTION SENSOR AND ANTI-OVERTURNING SYSTEM.

    €78,91

  • immagine-1-no-brand-stufa-camino-a-bioetanolo-round-35-kw-dimensioni-cm-63x155x45h

    NO BRAND Round Bioethanol Fireplace Stove 3.5 Kw Dimensions Cm 63x15.5x45h

    ROUND 3.5 kW bioethanol fireplace stove Dimensions cm 63x15,5x45h Mod. ROUND positioning on the wall, does not require a flue. With shutter burner for flame regulation. Maximum power 3.5 kW/h Dimensions cm 63x15,5x45h General characteristics Bioethanol fireplace Bioethanol is a fuel that does not produce smoke, bad smells and unburned residues. Bioethanol fireplaces allow, even those who live in a condominium apartment, not to give up the fireplace as solutions that work without the aid of flues, since they do not produce fumes that need to be disposed of. ROUND Mod. ROUND positioning on the wall, does not require a flue. With shutter burner for flame regulation. Maximum power 3.5 kW/h Dimensions cm 63x15,5x45h Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    €139,00

  • immagine-1-la-nordica-offerta-stufa-a-pellet-ventilata-la-nordica-extraflame-giusy-evo-7-kw-colore-bianco

    La Nordica Offer Ventilated Pellet Stove La Nordica Extraflame Giusy Evo 7 Kw Color White

    ATTENTION ! OFFER VALID UNTIL STOCKS LAST! In order to purchase the product on delivery, a 10% deposit must be paid. Technical features Model: Giusy Evo Product code : 1280506 White color Heatable surface: 200m3 Performance Nominal useful heat output : 2.4 ~7.0 kW Global thermal power : 2.7 ~8.1 kW Energy efficiency : A+ Pellets consumption : 0,6 ~ 1,7 Kg/h Efficiency : >86 % Tank capacity : ~15 kg Power Consumption: 60~80W Draft : ~10 Pa Smoke outlet diameter: 80 mm External air intake pipe: 50 mm Hearth : Cast iron Forced ventilation : Yes Internal thermostat : Yes Safety thermostat : Yes Weekly programmer : Yes Dimensions and weight Dimensions : 498x1022x504 mm Net weight : 85.0 Kg Pellet stove La Nordica Extraflame You don't need the normal wooden logs that we are all used to seeing, but tiny pre-compressed products, i.e. pellets, these are ecological fuels with a very high caloric yield, obtained by pressing residues and fragments of the best wood, without adding glues. Suffice it to say that their real yield is close to 90%. The innovative La Nordica Extraflame pellet stoves have been added to the already traditional wood-burning stoves on the market. The control panel allows automatic ignition and setting of the heating power, establishing the desired temperature thanks to the built-in room thermostat Clean Air, the new culture of fire The La Nordica-Extraflame group has joined the Aria Pulita voluntary certification, the new quality certification for wood and pellet-fired domestic heating products This project calls for a Certification Committee made up of ENEA, LEGA AMBIENTE, NATIONAL CONSUMERS UNION coordinated by AIEL, the Italian Agroforestry Energies Association. The provided indication, very simple and intuitive thanks to the use of an increasing classification from 1 to 5 stars based on the performance of the products in terms of greater efficiency and lower emissions, will allow each user to recognize the qualities of the stove he buys in the full compliance with the most restrictive technical parameters and indications on emissions into the environment. Aria Pulita is therefore not a mere response to the temporary contingencies of exceeding the emission limits in a limited period of the year in a specific area or region, but it is a concrete guarantee for consumers throughout Italy that certified products contribute to improving air quality, health and the environment based on the cornerstones of transparency, objectivity and clarity Materials and components Cast iron La Nordica-Extraflame has always used the best cast iron for the production of its products. Thanks to the high coefficient of thermal tension which allows to keep the shapes unaltered, cast iron is the perfect material for stoves: resistant to heat and shocks, suitable for transferring heat, diffusing it for a long time in the environment. It is also absolutely ecological as it is completely recyclable. For the products in the range, the enamelled finish is offered, which guarantees an aesthetic with unlimited duration and with minimum maintenance, or painted Majolica The long working cycle (two weeks) necessary to obtain a majolica, while making use of the newest technological supports to guarantee total quality, must be carried out completely by hand. The result is that each majolica is a beautiful, unique and unrepeatable piece and the particularities that can be found on each single majolica such as crazing, punctuation and shading are the guarantee Ceramic glass Compared to normal glass, ceramic glass has a coefficient of thermal expansion equal to almost zero, so as not to be deformed by the effect of heat and represent an indispensable material for all fireplaces and stoves, where not only flat but also angled slabs are used, rounded or even three-dimensional and in various sizes. Nordiker For the construction of the refractories, La Nordica-Extraflame has deposited Nordiker, a special material which, thanks to its resistance, allows to reach high combustion temperatures. The Nordiker offers safety of use, ease of maintenance and long life. It is also in itself an indicator of operation, since maintaining the light color not only enhances the brightness of the flame but indicates correct use of the appliance. Choosing Nordiker products translates into better functioning, great aesthetic results and lower emissions for the customer. Applied Technology certifications Certifications obtained from the most prestigious international quality brands mean that the purchase of a La Nordica-Extraflame product becomes an absolute guarantee both in Italy and abroad. In fact, boasting these brands means being able to comply with the rigorous dictates of general quality, thermal efficiency and compliance with the parameters of carbon monoxide emissions into the atmosphere required by the most restrictive European regulations. Obtaining these marks was achieved thanks to continuous research and checks carried out by technicians using the most advanced tools. The uninterrupted research and countless tests guarantee an absolute level of safety for the products. The future breathes our choices Wood and pellets, natural, renewable, potentially inexhaustible fuels, increasingly represent an opportunity not to further wear out our ecosystem already tried by the emissions of other human activities. During the combustion of biomass, the same amount of CO 2 is released as the tree absorbed during its growth, contrary to what happens with fossil fuels. In fact, coal, oil and natural gas quickly release the carbon accumulated over millions of years, causing the environmental imbalance known as the "greenhouse effect". Instead, the combustion of wood, as well as the other processes that break it down, do not increase the presence of CO 2 in the air and therefore do not create dangerous changes in the climate. Furthermore, thanks to the continuous technological improvement of the latest generation appliances, today heating with modern biomass generators also means reducing dust emissions by up to 70%, thus safeguarding air quality. Wood and pellets are therefore synonymous with renewable energy and help to combat climate change and, last but not least, to save on household bills. Acting in the present with an eye to the future: the environment of our tomorrow starts today. Pellet stoves Extraflame, market leader in the pellet sector, wanted to express with this collection the best in design and technology, with a vast range of products to heat the rooms of your home in the comfort of a natural climate. Extraflame is the ideal choice for those who want to combine functionality, ecology, comfort and above all…savings Pellet stove Giusy Evo Ventilated Coating in painted steel and majolica top Forced ventilation Removable ash drawer Removable cast iron hearth Safety thermostat Internal thermostat Weekly programmer Giusy Plus : Channeling up to 6 meters via an outlet with a Ø80 rear thermostatable diameter Possibility to connect the rear or upper smoke outlet Giusy Evo stove technologies Acoustic Comfort Fan Adjusts the speed of the front ventilation favoring the silence of the stove. The function is enabled by the user and is active at any power ACC Auto Clean Checkup Increases combustion efficiency and the life of parts subject to wear and, at the same time, reduces the ordinary cleaning of the brazier. RTC Room Temperature Control The presence of the room probe optimizes comfort and leads to a significant reduction in consumption HRP Hard Reset Program Restoration of the initial factory preset data, in the event of a programming error ARS Auto Re-Start The appliance restarts automatically following a power blackout, after having carried out the foreseen cycle of checks EAC Electronic Air Control Electronically balanced primary and secondary air for optimal combustion and thermal efficiency CGC Clean Glass Control It is a system which, through a specific preheated air path, effectively prevents the formation of deposits on the glass of the fire door PLC Pellet Level Control Adjusts the quantity of pellets to be introduced into the combustion chamber RDT Resistant Door at the Time The doors of the products made of high quality cast iron are unalterable over time and guarantee constant sealing Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    €999,00

  • immagine-1-prity-stufa-a-legna-con-forno-fime-1216-kw-acciaio-nero-antracite

    PRITY Wood Stove With Fime Oven 12/16 Kw Anthracite Black Steel

    Wood stove KIR 9/12 kW anthracite black steel Mod. FIME Thermal power 12.0 kW Heatable volume 220 m3 Global thermal power 16.0 kW Smoke outlet ø 13 cm Oven dimensions 36x37x23h cm Weight 113kg Dimensions cm 49x46x103h - High thickness steel structure - Combustion chamber FIME The Fime model represents a wood (and coal) stove produced in Europe and compliant with current regulations. The structure is made of thick steel, painted entirely with high quality Rembrandtin products, resistant to high temperatures. Ceramic glass is produced by Schott and resists over 1000 °C. The primary air control takes place through the wooden knob placed on the ash pan. The combustion chamber consists of a cast iron base plate (which can be removed for cleaning) and a perimeter surface in refractory brick. The stove has an efficient wood-burning oven, with indirect cooking, i.e. it works thanks to the smoke circulation and is equipped with a thermometer for temperature control. Product Guarantee All the products on sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    €501,60

  • immagine-1-sicar-stufa-a-gas-metano-sicar-eco40

    Sicar Methane Gas Stove 'Sicar' Eco40

    Natural gas stove SicarEco 40 Model ECO 40 natural gas. Max power 4200W. Can be installed on the wall or on the floor. Equipped with oxygen exhaustion sensor and anti-overturning safety switch. Heatable volume 110 m3. Dimensions cm 43x15x64H.

    €98,00

  • immagine-1-king-termostufa-a-pellet-king-idro-slim-16-kw-bordeaux-140m2-con-telecomando

    King King Idro Slim Pellet Heating Stove 16 Kw Bordeaux 140m2 With Remote Control

    Technical features Overall power (max-min): 16.1 - 4.1 kW Rated power (max-min): 15.0 - 4.0 kW Power delivered to water (max - min): 12.7 - 2.8 kW Power delivered to the environment (max - min): 2.3 - 1.2 kW Hourly pellet consumption (max-min): 0.8 - 3.4 kg-h Heatable volume: 320 m3 Efficiency (max-min): 96.5 - 93.56% Fumes exhaust duct: 80 ø mm Pellet tank capacity: 29 - 19 litres-kg Autonomy (max-min): 20 - 6 h Operating electric power: 140 - 350 W Dimensions (LxWxH): 1100 x 250 x 1000 mm Weight: 120kg General characteristics PELLET STOVES   Why Wood or Pellet? The need to use alternative energy sources arises spontaneously. Using wood is nothing more than the rediscovery of the primordial source of heating, focusing on a Renewable Energy. In fact, wood and pellets are among the renewable sources and the carbon dioxide (CO2) emitted for the production of energy does not increase that present in the environment, but is the same that the plants first absorbed to develop and which would into the atmosphere through the normal decomposition processes of wood at the end of their life cycle. The use of wood and pellets therefore puts carbon dioxide C02 into the atmosphere making it available again to plants which will absorb it through the process of chlorophyll photosynthesis. The thermal energy produced from wood or pellets is an intelligent eco-sustainable and at the same time economic alternative if compared to fossil fuels since the purchase price is 50/60% lower. Absolute convenience using wood or pellets. Those who heat with wood become independent of traditional energy sources and the supply of wood is always guaranteed. Heating with wood means heating following the natural cycle of CO2 (carbon dioxide). During combustion, the wood is released into the atmosphere a quantity of CO2 equal to that which a tree would develop after being felled, in the decomposition phase; the same amount that a healthy shrub could absorb anyway. For this reason, the use of energy obtainable from wood is to be considered neutral from the point of view of CO2 emissions and does not contribute in the least to the increase in the greenhouse effect; on the contrary, for every liter of fuel replaced by wood, significant quantities of CO2 emissions are avoided. The use of wood and pellet stoves reduce costs while increasing the heat output. KING IDRO SLIM 16   Steel cladding, majolica top Frontal radiation Ash drawer Heat exchanger with manual cleaning system Safety thermostat Internal thermostat Arrangement for external thermostat Weekly chronothermostat Remote control Circulation pump Expansion tank 3 bar safety valve Automatic air vent valve

    €2.425,20

  • immagine-1-vulcano-termocamino-a-legna-new-vulcano-25-a-scomparsa-verticale-3-scambiatori-con-centralina-inclusa

    Vulcano Wood-burning fireplace New Vulcano 25 Vertical Concealed 3 Exchangers With Control Unit Included

    Wood-burning fireplace NEW VULCANO 25 vertical retractable 3 exchangers with control unit included VOLCANO The Vulcano closed fireplace is a modern, efficient, functional, aesthetically pleasing product, with management suited to today's needs and capable of combining these factors with the history and tradition of a century-old product such as the fireplace. Structure The structure is made of thick steel. The walls are smooth and free from mechanisms. The secondary exchangers are made of copper and are placed in a bain-marie in the interspaces of the primary. The painting is made with epoxy powders suitable for high temperatures. Plant engineering The plant engineering capacities are completely similar to fossil fuel boilers: it can feed any type of heating system, with any type of piping, with any type of circuit: open, closed or mixed, it can work alone or in combination with other boilers. Heating The thermal performance is also similar to fossil fuel boilers. In fact, it can correctly heat homes up to 320 m2, in any climatic zone and any energy class they belong to. Hot water The hot water supply is superior to the best instantaneous boilers and its flow is constant. Furthermore, each model has an internal supply proportionate to its power which allows it to guarantee the supply for several hours even with the fire off. You consume The new models have even greater efficiency which allows them to consume about a third of the gas boilers and less than half of the pellet ones for the same amount of heat supplied. Management Charges of any size can be carried out, it does not need to be looked after, it can be used for cooking food or as a barbecue, the ash can be removed 1-2 times a week and the same goes for cleaning the glass. The smoke duct should be cleaned 1-2 times a year. Models Four models are produced, suitable for heating surfaces from 50 to 320 m2. The choice must be made according to the indications given in the table below. Installation The installation of Vulcano fireplace stoves is simple, fast, legal and within the reach of all installers. This is due to their ability to directly perform all the functions that may be required: heating, hot water, interface with other boilers, etc. Once the model suitable for your needs has been purchased, it can be connected directly: without boilers, exchangers and various kits. To give you a better idea, we report some drawings of the most common installations of the three series. The figures with boilers refer to when they already exist or are needed for other generators or for specific needs. Usage The use of the Vulcano closed fireplace is very simple: even simpler than the classic fireplace. In fact, once loaded it does not need anything else: there is no need to remove the wood, there is no need to operate levers or switches, there is no need to change the combustion air, etc. In practice, you can also leave the house as you would with a classic fireplace, being careful not to leave the door open or flammable materials in the immediate vicinity. It is advisable to keep the door closed also to have a greater yield but nothing prevents you from keeping it open for cooking food or using the fireplace stove as a barbecue without any risk of smoke or bad smells in the house. Charges can be made of any size without fear of boiling or other anomalies: autonomy is based on the charge. The ash can be removed once a week as this new series has an even larger compartment and produces even less. The glass can be cleaned from once a day to once a week depending on the humidity of the wood and the draft in the flue. The hydrothermal aspect is managed automatically directly by the control unit, therefore it is not necessary to activate switches and stop keys and neither is it necessary to make adjustments or manual interventions of any kind. From a safety point of view, once the closed fireplace has been installed according to the instructions given in the instruction manual, no dangerous situations can arise under any conditions (except those of a normal fireplace). Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    €2.986,00

  • immagine-1-la-nordica-stufa-a-pellet-la-nordica-extraflame-viviana-evo-102-kw-pergamena-new

    La Nordica Pellet Stove La Nordica Extraflame Viviana Evo 10.2 Kw Parchment - New

    A 10% DEPOSIT IS REQUIRED FOR CASH ON DELIVERY PAYMENTS ON THE STOVES Technical features Dimensions : L 525 x H 1054 x D 579 mm Net weight : 118 Kg Smoke outlet diameter: 80 mm heated m3 : 292 m3 Nominal thermal power useful : 3.0 - 10.2 kW Overall thermal power: 3.3 - 11.4 kW Efficiency : 90 % Hourly consumption : 0.7 - 2.3 kg/h Total tank capacity: ~18 kg Power consumption: 60-80W Draft : ~10 Pa Ext. air intake pipe : 50mm To view further information on the product CLICK HERE General characteristics PELLET STOVES You don't need the normal wooden logs that we are all used to seeing, but tiny pre-compressed products ( pellets ), these are ecological fuels with a very high caloric yield, obtained from the pressing of residues and fragments of the best wood, without adding glues; just think that their real yield is close to 90%. The innovative LA NORDICA EXTRAFLAME pellet stoves have been added to the already traditional wood-burning stoves on the market. The control panel allows automatic ignition and the setting of the heating power, establishing the desired temperature thanks to the built-in room thermostat. VIVIANA EVO Pellet stove with painted steel cladding and majolica top Forced ventilation Removable ash drawer Removable cast iron hearth Heat exchanger with manual cleaning system Safety thermostat Internal thermostat Weekly programmer. AUTO CLEAN CHECK UP increases the efficiency of the combustion and the life of the parts subject to wear and, at the same time, decreases the ordinary cleaning of the brazier ROOM TEMPERATURE CONTROL the presence of the ambient probe optimizes comfort and leads to a significant reduction in consumption. RESISTANT DOOR AT THE TIME the doors of the products made of high quality cast iron are unalterable over time and guarantee a constant seal HARD RESET PROGRAM Restoration of the initial factory preset data, in the event of a programming error. AUTO RE-START the appliance switches back on automatically following a power blackout, after having carried out the foreseen cycle of checks ELECTRONIC AIR CONTROL primary and secondary air electronically balanced for optimal combustion and thermal efficiency CLEAN GLASS CONTROL It is a system which effectively avoids the formation of deposits on the glass of the fire door through a specific path of preheated air PELLETS LEVEL CONTROL adjusts the quantity of pellets to be introduced into the combustion chamber

    €1.734,00

  • immagine-1-la-nordica-termostufa-a-pellet-la-nordica-extraflame-modello-raffaella-idro-2.0-188-kw-colore-bordeaux-ean-8055776918372

    La Nordica Pellet heating stove La Nordica Extraflame Model Raffaella Idro 2.0 18.8 Kw Color Bordeaux

    A 10% DEPOSIT IS REQUIRED FOR CASH ON DELIVERY PAYMENTS ON THE STOVES Technical features Dimensions : 633x1176x624 mm Net weight : 215 Kg Smoke outlet diameter: 80 mm heated m3 : 540 m3 Power yield to liquid: 3.9–15.7 kW Ambient output power: 1.4–3.1 kW Nominal thermal power useful: 5.3–18.8 kW Overall thermal power: 5.5–20.5 kW Exchanger fluid content : 18.5 Operating pressure : 2.5 bar Efficiency : >91 % Hourly consumption: 1.2-4.2 Kg/h Total tank capacity: ~ 35 Kg Forced ventilation : Yes Remote control : Yes Safety thermostat : Yes External thermostat preset: Yes Power consumption: 90-110W Draft : ~10 Pa Pump and expansion tank : Yes Ext. air intake pipe : 50mm Weekly chronothermostat : Yes 3 bar safety valve : Yes *NB First ignition not compulsory for a fee, stoves already lit in the company! General characteristics PELLET THERMOSTOVES La Nordica-Extraflame wood-burning and pellet-burning thermoproducts make use of technologically advanced design solutions that allow you to heat your home in total respect for the environment with excellent heat output and low wood consumption. The thermo-products are particular devices designed for connection to the home heating system (for example the radiators or the underfloor system), they can be easily integrated into the existing boiler or to a solar thermal system for the production of domestic hot water . The choice of the appliance to be installed must be made according to specific individual needs, thus evaluating the overall thermal power required and the method with which the thermo-stove will be connected to the system. You don't need the normal wooden logs that we are all used to seeing, but tiny pre-compressed products ( pellets ), these are ecological fuels with a very high caloric yield, obtained from the pressing of residues and fragments of the best wood, without adding glues; just think that their real yield is close to 90%. The control panel allows automatic ignition and the setting of the heating power, establishing the desired temperature thanks to the built-in room thermostat. RAFFAELA IDRO Coating in painted steel Front ventilation with the possibility of exclusion Ash drawer Heat exchanger with manual cleaning system Safety thermostat Internal thermostat Arrangement for external thermostat (TA) Weekly chronothermostat Remote control Circulation pump Expansion tank 3 bar safety valve This product is certified 4 stars according to the emissions and performance requirements of the Aria Pulita certification. To find out more, visit the dedicated page . Pellet stove technologies: AUTO CLEAN CHECK UP increases the efficiency of the combustion and the life of the parts subject to wear and, at the same time, decreases the ordinary cleaning of the brazier ROOM TEMPERATURE CONTROL the presence of the ambient probe optimizes comfort and leads to a significant reduction in consumption. CHRONO THERMOSTAT PROGRAM chronothermostat with temperature control divided into four daily bands, for optimal room management NETWORK SYSTEM system that allows, even when you are away from home, to interact with Extraflame devices via GPRS system or graphic display RESISTANT DOOR AT THE TIME the doors of the products made of high quality cast iron are unalterable over time and guarantee a constant seal DIGITAL PRESSURE CONTROL system that allows any malfunctions relating to the hydraulic pressure to be displayed on the display DELAY STOP SYSTEM delayed shutdown of the stove KEYLOCK SYSTEM allows you to lock the display keypad to prevent improper or accidental use of the device (key lock) AUTO RE-START the appliance switches back on automatically following a power blackout, after having carried out the foreseen cycle of checks ELECTRONIC AIR CONTROL primary and secondary air electronically balanced for optimal combustion and thermal efficiency CLEAN GLASS CONTROL It is a system which effectively avoids the formation of deposits on the glass of the fire door through a specific path of preheated air PELLETS LEVEL CONTROL adjusts the quantity of pellets to be introduced into the combustion chamber TEMPERATURE CONTROL INTERFACE the product interfaces with the home temperature control devices (thermostats and contacts) to obtain the desired temperature in the rooms. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    €3.207,60

  • immagine-1-hidro-box-modulo-di-separazione-hidro-box-caldaia-biomassa-per-gestione-riscaldamento-30-piastre-2-pompe-hb30-codice-128101-ean-8054602000458

    HIDRO-BOX Hidro Box Boiler / Biomass Separation Module For Heating Management 30 Plates 2 Pumps Hb30 Code 128101

    General characteristics Brand: Hydrobox Code: 128101 EAN: 8054602000458 Model: HB30 Number of plates: 30 Number of pumps: 2 Data sheet Pumps: Wilo Para 15/6 SC AISI 316 stainless steel plate heat exchanger Module: L401 x H412 x D106mm External box: L406.5 x H500 x D115mm Built-in box: L461 x H532 x P101mm Connection Example Legend A: Return from the plant G¾” B: Delivery to the system G¾” C: G¾” thermoproduct inlet D: G¾” thermoproduct outlet S1: Probe for reference temperatures Description Module for the hydraulic separation of the heating circuit of the solid fuel generator (open or closed vessel) from other generators with closed vessel, to avoid adding the powers of the two generators as required by INAIL (ex ISPESL) standards. Standard module 28 kW/h with 30 plate heat exchanger Operation When the biomass thermo-product is turned on, the temperature rises inside the appliance until the fluid inside reaches a certain threshold. Once this temperature is reached, the thermostat installed on the thermo-product (or the control unit probe) opens the electrical contact and simultaneously carries out the following operations: • Start-up of the thermo-product circulator (HB30 and HB40 models only) and of the heating system circulator; • Shutdown of the auxiliary source (boiler) if in operation. Components The module consists of a sheet metal support for wall installation, a 30 or 40 plate heat exchanger, 2 vent valves, an electrical junction box, DN 20 mm copper pipes, a painted sheet metal cover, one or 2 circulators. Optional electronic control unit.

    €613,00


You have seen 60 out of 415 products

Recently viewed products

Login

Forgot your password?

Don't have an account yet?
Create account