Wood-burning fireplace NEW VULCANO 25 vertical retractable 1 exchanger with control unit included Nb: models with 1 exchanger do not produce DHW VOLCANO The Vulcano closed fireplace is a modern, efficient, functional, aesthetically pleasing product, with management suited to today's needs and capable of combining these factors with the history and tradition of a century-old product such as the fireplace. Structure The structure is made of thick steel. The walls are smooth and free from mechanisms. The secondary exchangers are made of copper and are placed in a bain-marie in the interspaces of the primary. The painting is made with epoxy powders suitable for high temperatures. Plant engineering The plant engineering capacities are completely similar to fossil fuel boilers: it can feed any type of heating system, with any type of piping, with any type of circuit: open, closed or mixed, it can work alone or in combination with other boilers. Heating The thermal performance is also similar to fossil fuel boilers. In fact, it can correctly heat homes up to 320 m2, in any climatic zone and any energy class they belong to. Hot water The hot water supply is superior to the best instantaneous boilers and its flow is constant. Furthermore, each model has an internal supply proportionate to its power which allows it to guarantee the supply for several hours even with the fire off. You consume The new models have even greater efficiency which allows them to consume about a third of the gas boilers and less than half of the pellet ones for the same amount of heat supplied. Management Charges of any size can be carried out, it does not need to be looked after, it can be used for cooking food or as a barbecue, the ash can be removed 1-2 times a week and the same goes for cleaning the glass. The smoke duct should be cleaned 1-2 times a year. Models Four models are produced, suitable for heating surfaces from 50 to 320 m2. The choice must be made according to the indications given in the table below. Installation The installation of Vulcano fireplace stoves is simple, fast, legal and within the reach of all installers. This is due to their ability to directly perform all the functions that may be required: heating, hot water, interface with other boilers, etc. Once the model suitable for your needs has been purchased, it can be connected directly: without boilers, exchangers and various kits. To give you a better idea, we report some drawings of the most common installations of the three series. The figures with boilers refer to when they already exist or are needed for other generators or for specific needs. Usage The use of the Vulcano closed fireplace is very simple: even simpler than the classic fireplace. In fact, once loaded it does not need anything else: there is no need to remove the wood, there is no need to operate levers or switches, there is no need to change the combustion air, etc. In practice, you can also leave the house as you would with a classic fireplace, being careful not to leave the door open or flammable materials in the immediate vicinity. It is advisable to keep the door closed also to have a greater yield but nothing prevents you from keeping it open for cooking food or using the fireplace stove as a barbecue without any risk of smoke or bad smells in the house. Charges can be made of any size without fear of boiling or other anomalies: autonomy is based on the charge. The ash can be removed once a week as this new series has an even larger compartment and produces even less. The glass can be cleaned from once a day to once a week depending on the humidity of the wood and the draft in the flue. The hydrothermal aspect is managed automatically directly by the control unit, therefore it is not necessary to activate switches and stop keys and neither is it necessary to make adjustments or manual interventions of any kind. From a safety point of view, once the closed fireplace has been installed according to the instructions given in the instruction manual, no dangerous situations can arise under any conditions (except those of a normal fireplace). Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€2.269,00
Wood stove KIR 9/12 kW anthracite black steel Model KIR Thermal power 9.0 kW Heatable volume 220 m3 Global thermal power 12.0 kW Smoke outlet ø 13 cm Primary air control YES Manual draft control valve YES Energy efficiency >70% Weight 71kg Dimensions cm 46x38x75h - High thickness steel structure - Combustion chamber with cast iron base (removable) KIR file The kir model represents a wood (and coal) stove produced in Europe and compliant with current regulations. The structure is made of thick steel, painted entirely with high quality Rembrandtin products, resistant to high temperatures. Ceramic glass is produced by Schott and resists over 1000 °C. The primary air control takes place through the wooden knob placed on the ash pan. The combustion chamber consists of a cast iron base plate (which can be removed for cleaning) and a perimeter surface in refractory brick. On the steel top there is a circular cast iron plate which allows direct cooking. Like a wood stove. Product Guarantee All the products on sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€503,99
A 10% DEPOSIT IS REQUIRED FOR CASH ON DELIVERY PAYMENTS ON THE STOVES Technical features Dimensions : L 525 x H 1054 x D 579 mm Net weight : 118 Kg Smoke outlet diameter: 80 mm heated m3 : 292 m3 Nominal thermal power useful : 3.0 - 10.2 kW Overall thermal power: 3.3 - 11.4 kW Efficiency : 90 % Hourly consumption : 0.7 - 2.3 kg/h Total tank capacity: ~18 kg Power consumption: 60-80W Draft : ~10 Pa Ext. air intake pipe : 50mm General characteristics PELLET STOVES You don't need the normal wooden logs that we are all used to seeing, but tiny pre-compressed products ( pellets ), these are ecological fuels with a very high caloric yield, obtained from the pressing of residues and fragments of the best wood, without adding glues; just think that their real yield is close to 90%. The innovative LA NORDICA EXTRAFLAME pellet stoves have been added to the already traditional wood-burning stoves on the market. The control panel allows automatic ignition and the setting of the heating power, establishing the desired temperature thanks to the built-in room thermostat. VIVIANA EVO Pellet stove with painted steel cladding and majolica top Forced ventilation Removable ash drawer Removable cast iron hearth Heat exchanger with manual cleaning system Safety thermostat Internal thermostat Weekly programmer. Pellet stove technologies: AUTO CLEAN CHECK UP increases the efficiency of the combustion and the life of the parts subject to wear and, at the same time, decreases the ordinary cleaning of the brazier ROOM TEMPERATURE CONTROL the presence of the ambient probe optimizes comfort and leads to a significant reduction in consumption. RESISTANT DOOR AT THE TIME the doors of the products made of high quality cast iron are unalterable over time and guarantee a constant seal HARD RESET PROGRAM Restoration of the initial factory preset data, in the event of a programming error. AUTO RE-START the appliance switches back on automatically following a power blackout, after having carried out the foreseen cycle of checks ELECTRONIC AIR CONTROL primary and secondary air electronically balanced for optimal combustion and thermal efficiency CLEAN GLASS CONTROL It is a system which effectively avoids the formation of deposits on the glass of the fire door through a specific path of preheated air PELLETS LEVEL CONTROL adjusts the quantity of pellets to be introduced into the combustion chamber
€1.734,00
A 10% DEPOSIT IS REQUIRED FOR THE PURCHASES OF STOVES ON DELIVERY Note well! In the absence of immediate availability, the product will be ordered and shipped within 10 working days. Technical features: Net weight: 135kg Rated power 3.7-8.0 kW Total tank capacity: ~ 15 kg Rated Voltage: 230V Rated Frequency: 50Hz Rated Electric Power: 315W Heating volume Max : 230 m³ Dimensions (LHP): 750x1077x352mm Energy class: A+ Smoke outlet diameter: 80mm DM186 Environmental Certification: 4 STARS PELLET STOVES You don't need the normal wooden logs that we are all used to seeing, but tiny pre-compressed products ( pellets ), these are ecological fuels with a very high caloric yield, obtained from the pressing of residues and fragments of the best wood, without adding glues; just think that their real yield is close to 90%. The innovative LA NORDICA EXTRAFLAME pellet stoves have been added to the already traditional wood-burning stoves on the market. The control panel allows automatic ignition and the setting of the heating power, establishing the desired temperature thanks to the built-in room thermostat. MARILENA PLUS AD CRYSTAL General characteristics: Glass coating Room ventilation with upper outlet Removable ash collection compartment Hearth, door and brazier in cast iron Integrated room temperature thermostat Weekly programmer IR Touch remote control Hermetic tank Possibility of exit for the smoke exhaust: Top, Rear and Left side Ducting with dedicated motor, thermostatable, excludable and up to 8 meters range Safety "differential system" in the combustion chamber This product is certified 4 stars according to the emission and efficiency requirements of the certification PELLET STOVE TECHNOLOGIES: RATE ADJUSTMENT PROGRAM In two simple steps we can adjust the strength of the ventilation and, where present, of the ducting CHRONO THERMOSTAT PROGRAM chronothermostat with temperature control divided into four daily bands, for optimal room management ACOUSTIC COMFORT FAN Adjust the speed of the front ventilation favoring the silence of the stove. The function is enabled by the user and is active at any power. NETWORK SYSTEM system that allows, even when you are away from home, to interact with Extraflame devices via GPRS system or graphic display RESISTANT DOOR AT THE TIME the doors of the products made of high quality cast iron are unalterable over time and guarantee a constant seal DELAY STOP SYSTEM delayed shutdown of the stove KEYLOCK SYSTEM allows you to lock the display keypad to prevent improper or accidental use of the device (key lock) HARD RESET PROGRAM restoring the initial factory preset data, in the event of a programming error AUTO RE-START the appliance switches back on automatically following a power blackout, after having carried out the foreseen cycle of checks ELECTRONIC AIR CONTROL primary and secondary air electronically balanced for optimal combustion and thermal efficiency CLEAN GLASS CONTROL It is a system which effectively avoids the formation of deposits on the glass of the fire door through a specific path of preheated air PELLETS LEVEL CONTROL adjusts the quantity of pellets to be introduced into the combustion chamber TEMPERATURE CONTROL INTERFACE the product interfaces with the home temperature control devices (thermostats and contacts) to obtain the desired temperature in the rooms ROOM TEMPERATURE CONTROL The presence of the room probe optimizes comfort and leads to a significant reduction in consumption AUTO CLEAN CHECK UP It increases the efficiency of the combustion and the duration of the parts subject to wear and, at the same time, it decreases the ordinary cleaning of the brazier Product Guarantee : All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€2.460,00
Technical features heated m3 : 380 m3 Overall power (max-min): 3.8-16.3 kW Rated power (max-min): 3.7-15.2 kW Hourly pellet consumption (max-min): 0.8-3.4 kg/h Fumes exhaust duct: Ø 80 mm Pellet tank capacity: 23 Kg Dimensions (LxDxH) : 495x580x107 mm 5h autonomy Net weight: 105kg White color Remote control: available as an accessory. General characteristics PELLET STOVES You don't need the normal wooden logs that we are all used to seeing, but tiny pre-compressed products ( pellets ), these are ecological fuels with a very high caloric yield, obtained from the pressing of residues and fragments of the best wood, without adding glues; just think that their real yield is close to 90%. Features of pellet stoves: BRAZIER the brazier is easily removable for daily cleaning ELECTRONICS new electronics capable of predicting the weekly switch-on and switch-off schedules REMOTE CONTROL New design multi-function remote control, with LCD screen HEAT EXCHANGER shell and tube heat exchanger to increase thermal performance. Pipe sizes are reduced to avoid turbulence and noise SECONDARY CONVECTION in the combustion chamber there is a secondary convection to improve the combustion of the pellets COMBUSTION CHAMBER removable steel walls to facilitate cleaning of pellet combustion residue CLEAN GLASS air emission near the glass to prevent it from getting dirty GRILL The tank is equipped with a protective grid to prevent contact with the pellet loading mechanisms ASH COLLECTOR DRAWER drawer placed under the brazier to collect the ash produced by combustion SAFETY stove complete with temperature probes to monitor correct operation in safety FANS silence of the stove even at maximum working power PRESSURE SWITCH safety device that signals any obstructions in the smoke outlet Product Guarantee : All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€2.050,00
Technical features Model: Glass Energy efficiency class: A + Rated Power: Min 2.3 - Max 8.5 kW Thermal Efficiency: 92.2% M3 heatable: Min 59 - Max 207 m3 Fuel Type: Pellets Ø 6 mm Hourly consumption: Min 0.52 - Max 1.98 kg/h Autonomy: Min 28.8 - Max 7.6 h Tank capacity: 15 kg Consumption: 60W Smoke outlet: Ø 8 cm Dimensions: L 49.2 - D 54.6 - H 96.2 cm Weight: 90kg *NB FIRST LIGHTING OBLIGATORY FOR PAYMENT PELLET STOVES You don't need the normal wooden logs that we are all used to seeing, but tiny pre-compressed products ( pellets ), these are ecological fuels with a very high caloric yield, obtained from the pressing of residues and fragments of the best wood, without adding glues; just think that their real yield is close to 90%. Features of pellet stoves: BRAZIER the brazier is easily removable for daily cleaning ELECTRONICS new electronics capable of predicting the weekly switch-on and switch-off schedules REMOTE CONTROL New design multi-function remote control, with LCD screen HEAT EXCHANGER shell and tube heat exchanger to increase thermal performance. Pipe sizes are reduced to avoid turbulence and noise SECONDARY CONVECTION in the combustion chamber there is a secondary convection to improve the combustion of the pellets COMBUSTION CHAMBER removable steel walls to facilitate cleaning of pellet combustion residue CLEAN GLASS air emission near the glass to prevent it from getting dirty GRILL The tank is equipped with a protective grid to prevent contact with the pellet loading mechanisms ASH COLLECTOR DRAWER drawer placed under the brazier to collect the ash produced by combustion SAFETY stove complete with temperature probes to monitor correct operation in safety FANS silence of the stove even at maximum working power PRESSURE SWITCH safety device that signals any obstructions in the smoke outlet General characteristics GLASS STOVE Glass coating. Rear smoke outlet. Instant ash recovery. Electronic board with weekly programming. Connection to room thermostat. Remote control included. Stove with sealed chamber. Product plus All Freepoint products (excluding Hydro stoves) are equipped with a practical remote control that allows easy programming (switching on and off, power/temperature adjustment). Using an accessory kit (optional), this technology will give you the convenience of turning on, programming, controlling and turning off all FreePoint stove models from your smartphone, tablet/PC, wherever you are. The technology that makes stoves watertight, allowing them to be connected directly to the external air intake and guaranteeing superior efficiency. Since they do not need unsightly ventilation grilles (and the related drafts of cold air in the room), they can be placed in passive houses or houses with high energy efficiency. By optimizing the air distribution in the brazier, this technology makes it even easier to ignite the pellets, even if there are residual humidity. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.363,20
PRODUCT AVAILABLE FROM 11/14 NB: A 10% DEPOSIT IS REQUIRED TO PURCHASE CASH ON DELIVERY STOVES Technical features Dimensions : 378x817x417mm Net weight : 56 kg Fire mouth dimensions: 190x165 mm Fireplace dimensions: 240x405x235 mm Smoke outlet diameter: 100 mm sup Hearth : Refractory m3 heated : 115 m3 Nominal thermal power useful : 4 kW Efficiency : 53.5% Hourly consumption: 1.8 kg/h To view more product information CLICK HERE General characteristics WOOD STOVES The particular attention aimed at protecting the environment and total respect for the ecosystem were the inputs that prompted La NORDICA-EXTRAFLAME to make large investments in product research and development, thus allowing for very high yields and low consumption, using only wood , fuel that is produced by nature and which returns to it through a perpetual circular flow. Our country has large wooded areas, and is therefore able to offer a varied quantity of wood. By using this resource, you can reap significant benefits: Environmental plan: In nature, it has been proven that wood, when it completes the decomposition cycle, releases a quantity of CO2 (carbon dioxide) into the atmosphere which is then used for the regrowth and development of new plants. Economic plan: 2.3Kg of dry wood have a calorific value equal to 1lt of diesel or 1m3 of natural gas. Given the equal benefit, only the cost varies, which for the purchase of wood will be 50-60% lower than for other fuels. Mignon Burn it all series Stove with external cladding in enamelled steel Cast iron head Chrome handles Grid shaker operated from the outside Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€288,00
General characteristics Brand: Sicar Model: Echo 40 Color: Grey Power supply: LPG EAN: 8025290000334 Data sheet Approvals: ce Gas type: LPG Pressure (mbar): 28-30 Hourly consumption (g/h): 305 Max power (watt/h): 4200 Max heatable volume (mc): 110 Heating positions: 3 Stop gas: yes Piezo ignition: yes Wall mounting: yes Floor glides: yes Available colour: grey Product dimensions (cm): 42.5 x 15 x 64 Product net weight (kg): 6.5 Box dimensions (cm): 47 x 17 x 69 Product gross weight (kg): 7.2 Description Connection to the gas via an external angled hose connector located on the left side of the stove. Double safety system thanks to the atmosphere analyzer which automatically switches off the stove if the percentage of carbon dioxide reaches 1.5% and interrupts the gas supply in case of accidental switch-off. Radiant unit made up of several ceramic plates, capable of delivering different heat powers. Infrared energy does not heat the air but only the surfaces, allowing for lower consumption. Stove certified with the CE mark and produced in Italy at our headquarters. Information Stoves without a flue cannot be used in bedrooms, bathrooms, studio flats, basements, campers, caravans and in rooms with a volume of less than 15 m3 and require permanent openings for air exchange. This product is not suitable for primary heating functions.
€134,81
Methane gas stove 'Sicar' Eco 45 Model ECO 45 natural gas. Max power 4200W. Can be installed on the wall or on the floor. Equipped with oxygen exhaustion sensor and anti-overturning safety switch. Protected flame. Heatable volume 110 m3. Dimensions cm 43x14x64H.
€125,40
A 10% DEPOSIT IS REQUIRED FOR CASH ON DELIVERY PAYMENTS ON THE STOVES Technical features Dimensions : 633x1176x624mm Net weight : 215 Kg Smoke outlet diameter: 80 mm heated m3 : 540 m3 Power yield to liquid: 3.9–15.7 kW Ambient output power: 1.4–3.1 kW Nominal thermal power useful: 5.3–18.8 kW Overall thermal power: 5.5–20.5 kW Exchanger fluid content : 18.5 Operating pressure : 2.5 bar Efficiency : >91 % Hourly consumption: 1.2-4.2 Kg/h Total tank capacity: ~ 35 Kg Forced ventilation : Yes Remote control : Yes Safety thermostat : Yes External thermostat preset: Yes Power consumption: 90-110W Draft : ~10 Pa Pump and expansion tank : Yes Ext. air intake pipe : 50mm Weekly chronothermostat : Yes 3 bar safety valve : Yes *NB First ignition not compulsory for a fee, stoves already lit in the company! General characteristics PELLET THERMOSTOVES La Nordica-Extraflame wood-burning and pellet-burning thermoproducts make use of technologically advanced design solutions that allow you to heat your home in total respect for the environment with excellent heat output and low wood consumption. The thermo-products are particular devices designed for connection to the home heating system (for example the radiators or the underfloor system), they can be easily integrated into the existing boiler or to a solar thermal system for the production of domestic hot water . The choice of the appliance to be installed must be made according to specific individual needs, thus evaluating the overall thermal power required and the method with which the thermo-stove will be connected to the system. You don't need the normal wooden logs that we are all used to seeing, but tiny pre-compressed products ( pellets ), these are ecological fuels with a very high caloric yield, obtained from the pressing of residues and fragments of the best wood, without adding glues; just think that their real yield is close to 90%. The control panel allows automatic ignition and the setting of the heating power, establishing the desired temperature thanks to the built-in room thermostat. RAFFAELA IDRO Coating in painted steel Front ventilation with the possibility of exclusion Ash drawer Heat exchanger with manual cleaning system Safety thermostat Internal thermostat Arrangement for external thermostat (TA) Weekly chronothermostat Remote control Circulation pump Expansion tank 3 bar safety valve This product is certified 4 stars according to the emissions and performance requirements of the Aria Pulita certification. To find out more, visit the dedicated page . Pellet stove technologies: AUTO CLEAN CHECK UP increases the efficiency of the combustion and the life of the parts subject to wear and, at the same time, decreases the ordinary cleaning of the brazier ROOM TEMPERATURE CONTROL the presence of the ambient probe optimizes comfort and leads to a significant reduction in consumption. CHRONO THERMOSTAT PROGRAM chronothermostat with temperature control divided into four daily bands, for optimal room management NETWORK SYSTEM system that allows, even when you are away from home, to interact with Extraflame devices via GPRS system or graphic display RESISTANT DOOR AT THE TIME the doors of the products made of high quality cast iron are unalterable over time and guarantee a constant seal DIGITAL PRESSURE CONTROL system that allows any malfunctions relating to the hydraulic pressure to be displayed on the display DELAY STOP SYSTEM delayed shutdown of the stove KEYLOCK SYSTEM allows you to lock the display keypad to prevent improper or accidental use of the device (key lock) AUTO RE-START the appliance switches back on automatically following a power blackout, after having carried out the foreseen cycle of checks ELECTRONIC AIR CONTROL primary and secondary air electronically balanced for optimal combustion and thermal efficiency CLEAN GLASS CONTROL It is a system which effectively avoids the formation of deposits on the glass of the fire door through a specific path of preheated air PELLETS LEVEL CONTROL adjusts the quantity of pellets to be introduced into the combustion chamber TEMPERATURE CONTROL INTERFACE the product interfaces with the home temperature control devices (thermostats and contacts) to obtain the desired temperature in the rooms Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€3.207,60
OFFER VALID UNTIL STOCKS LAST A 10% DEPOSIT IS REQUIRED FOR CASH ON DELIVERY PAYMENTS Technical features Model : Philo Comfort Air Product code : 7111031 Heatable volume : 221 m3 Performance Minimum useful power: 3.2 kW Nominal useful power: 9.0 kW Efficiency : 87.8 ~ 93.6% Outgoing smoke temperature: 90° ~ 170°C Draft recommended at minimum power: 0.05 mbar - 5 Pa Recommended draft at maximum power: 0.10 mbar - 10 Pa Smoke mass: 7.9 g per second Tank capacity: 27 litres Hourly pellet consumption: 0.7 ~ 2.0 Kg/h Autonomy : 9 ~ 26 hours Water content : 50 litres Maximum working pressure: 3 bar – 300 kPa Air inlet hole diameter: Ø 50 mm Smoke outlet hole diameter: Ø 80 mm Air intake : 80cm 2 Dimensions and weight Dimensions (WxHxD): 904x1135x270 mm Weight : 135.0 kg Pellet stove Philo Comfort Air View of the flame even more beautiful The combustion chamber is completely new, larger and more proportionate, to favor an even more exciting view of the fire. Both height and depth of the hearth have increased, guaranteeing a vertical development and a more natural movement of the flame. Even the hearth and crucible have been cleaned and the shapes softened for a pleasant view even when the flame is out Standard waterproof structure Thanks to a perfectly sealed combustion chamber, this product works by drawing oxygen exclusively from the outside and offering lower consumption and perfect thermal comfort in the most modern homes, even those in class A, without any risk of smoke emissions into the environment. Product Guarantee : All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.766,00
Technical features Overall power (max-min): 19.6 - 5.4 kW Rated power (max-min): 18.46 - 5.1 kW Power delivered to water (max-min): 15.05 - 3.9 kW Power delivered to the environment (max-min): 3.41 - 1.2 kW Hourly pellet consumption (max-min): 4 - 1.08 kg-h Efficiency (max-min): 95.4 - 94.2% Fumes exhaust duct: 80 ø mm Pellet tank capacity: 64.6 - 42 litres-kg Autonomy (max-min): 39 - 10.5 h Operating electric power: 140 - 350 W Dimensions (WxDxH): 611x671x1266 mm Weight: 230kg With remote control and room fan General characteristics PELLET THERMOSTOVES The wood or pellet thermo-products make use of technologically advanced design solutions which allow the thermal power of the fire to be exploited both to heat the room and to produce hot water which feeds the traditional radiator system of the whole house. This double use makes the thermo-products unique in their kind and allows an optimal thermal yield and considerable savings. The thermo-products are particular devices designed for connection to the home heating system (for example the radiators or the underfloor system), they can be easily integrated into the existing boiler or to a solar thermal system for the production of domestic hot water . The choice of the appliance to be installed must be made according to specific individual needs, thus evaluating the overall thermal power required and the method with which the thermo-stove will be connected to the system. Why Wood or Pellet? The need to use alternative energy sources arises spontaneously. Using wood is nothing more than the rediscovery of the primordial source of heating, focusing on a Renewable Energy. In fact, wood and pellets are among the renewable sources and the carbon dioxide (CO2) emitted for the production of energy does not increase that present in the environment, but is the same that the plants first absorbed to develop and which would into the atmosphere through the normal decomposition processes of wood at the end of their life cycle. The use of wood and pellets therefore puts carbon dioxide C02 into the atmosphere making it available again to plants which will absorb it through the process of chlorophyll photosynthesis. The thermal energy produced from wood or pellets is an intelligent eco-sustainable and at the same time economic alternative if compared to fossil fuels since the purchase price is 50/60% lower. Absolute convenience using wood or pellets. Those who heat with wood become independent of traditional energy sources and the supply of wood is always guaranteed. Heating with wood means heating following the natural cycle of CO2 (carbon dioxide). During combustion, the wood is released into the atmosphere a quantity of CO2 equal to that which a tree would develop after being felled, in the decomposition phase; the same amount that a healthy shrub could absorb anyway. For this reason, the use of energy obtainable from wood is to be considered neutral from the point of view of CO2 emissions and does not contribute in the least to the increase in the greenhouse effect; on the contrary, for every liter of fuel replaced by wood, significant quantities of CO2 emissions are avoided. The use of wood and pellet stoves reduce costs while increasing the heat output. Features of pellet stoves: BRAZIER the brazier is easily removable for daily cleaning ELECTRONICS new electronics capable of predicting the weekly switch-on and switch-off schedules REMOTE CONTROL New design multi-function remote control, with LCD screen HEAT EXCHANGER shell and tube heat exchanger to increase thermal performance. Pipe sizes are reduced to avoid turbulence and noise SECONDARY CONVECTION in the combustion chamber there is a secondary convection to improve the combustion of the pellets COMBUSTION CHAMBER removable steel walls to facilitate cleaning of pellet combustion residue CLEAN GLASS air emission near the glass to prevent it from getting dirty GRILL The tank is equipped with a protective grid to prevent contact with the pellet loading mechanisms ASH COLLECTOR DRAWER drawer placed under the brazier to collect the ash produced by combustion SAFETY stove complete with temperature probes to monitor correct operation in safety FANS silence of the stove even at maximum working power PRESSURE SWITCH safety device that signals any obstructions in the smoke outlet
€2.352,00
You have seen 48 out of 415 products
