Wood-burning fireplace NEW VULCANO 25 vertical retractable 1 exchanger with control unit included Nb: models with 1 exchanger do not produce DHW VOLCANO The Vulcano closed fireplace is a modern, efficient, functional, aesthetically pleasing product, with management suited to today's needs and capable of combining these factors with the history and tradition of a century-old product such as the fireplace. Structure The structure is made of thick steel. The walls are smooth and free from mechanisms. The secondary exchangers are made of copper and are placed in a bain-marie in the interspaces of the primary. The painting is made with epoxy powders suitable for high temperatures. Plant engineering The plant engineering capacities are completely similar to fossil fuel boilers: it can feed any type of heating system, with any type of piping, with any type of circuit: open, closed or mixed, it can work alone or in combination with other boilers. Heating The thermal performance is also similar to fossil fuel boilers. In fact, it can correctly heat homes up to 320 m2, in any climatic zone and any energy class they belong to. Hot water The hot water supply is superior to the best instantaneous boilers and its flow is constant. Furthermore, each model has an internal supply proportionate to its power which allows it to guarantee the supply for several hours even with the fire off. You consume The new models have even greater efficiency which allows them to consume about a third of the gas boilers and less than half of the pellet ones for the same amount of heat supplied. Management Charges of any size can be carried out, it does not need to be looked after, it can be used for cooking food or as a barbecue, the ash can be removed 1-2 times a week and the same goes for cleaning the glass. The smoke duct should be cleaned 1-2 times a year. Models Four models are produced, suitable for heating surfaces from 50 to 320 m2. The choice must be made according to the indications given in the table below. Installation The installation of Vulcano fireplace stoves is simple, fast, legal and within the reach of all installers. This is due to their ability to directly perform all the functions that may be required: heating, hot water, interface with other boilers, etc. Once the model suitable for your needs has been purchased, it can be connected directly: without boilers, exchangers and various kits. To give you a better idea, we report some drawings of the most common installations of the three series. The figures with boilers refer to when they already exist or are needed for other generators or for specific needs. Usage The use of the Vulcano closed fireplace is very simple: even simpler than the classic fireplace. In fact, once loaded it does not need anything else: there is no need to remove the wood, there is no need to operate levers or switches, there is no need to change the combustion air, etc. In practice, you can also leave the house as you would with a classic fireplace, being careful not to leave the door open or flammable materials in the immediate vicinity. It is advisable to keep the door closed also to have a greater yield but nothing prevents you from keeping it open for cooking food or using the fireplace stove as a barbecue without any risk of smoke or bad smells in the house. Charges can be made of any size without fear of boiling or other anomalies: autonomy is based on the charge. The ash can be removed once a week as this new series has an even larger compartment and produces even less. The glass can be cleaned from once a day to once a week depending on the humidity of the wood and the draft in the flue. The hydrothermal aspect is managed automatically directly by the control unit, therefore it is not necessary to activate switches and stop keys and neither is it necessary to make adjustments or manual interventions of any kind. From a safety point of view, once the closed fireplace has been installed according to the instructions given in the instruction manual, no dangerous situations can arise under any conditions (except those of a normal fireplace). Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Wood-burning fireplace NEW VULCANO 25 vertical retractable 3 exchangers with control unit included VOLCANO The Vulcano closed fireplace is a modern, efficient, functional, aesthetically pleasing product, with management suited to today's needs and capable of combining these factors with the history and tradition of a century-old product such as the fireplace. Structure The structure is made of thick steel. The walls are smooth and free from mechanisms. The secondary exchangers are made of copper and are placed in a bain-marie in the interspaces of the primary. The painting is made with epoxy powders suitable for high temperatures. Plant engineering The plant engineering capacities are completely similar to fossil fuel boilers: it can feed any type of heating system, with any type of piping, with any type of circuit: open, closed or mixed, it can work alone or in combination with other boilers. Heating The thermal performance is also similar to fossil fuel boilers. In fact, it can correctly heat homes up to 320 m2, in any climatic zone and any energy class they belong to. Hot water The hot water supply is superior to the best instantaneous boilers and its flow is constant. Furthermore, each model has an internal supply proportionate to its power which allows it to guarantee the supply for several hours even with the fire off. You consume The new models have even greater efficiency which allows them to consume about a third of the gas boilers and less than half of the pellet ones for the same amount of heat supplied. Management Charges of any size can be carried out, it does not need to be looked after, it can be used for cooking food or as a barbecue, the ash can be removed 1-2 times a week and the same goes for cleaning the glass. The smoke duct should be cleaned 1-2 times a year. Models Four models are produced, suitable for heating surfaces from 50 to 320 m2. The choice must be made according to the indications given in the table below. Installation The installation of Vulcano fireplace stoves is simple, fast, legal and within the reach of all installers. This is due to their ability to directly perform all the functions that may be required: heating, hot water, interface with other boilers, etc. Once the model suitable for your needs has been purchased, it can be connected directly: without boilers, exchangers and various kits. To give you a better idea, we report some drawings of the most common installations of the three series. The figures with boilers refer to when they already exist or are needed for other generators or for specific needs. Usage The use of the Vulcano closed fireplace is very simple: even simpler than the classic fireplace. In fact, once loaded it does not need anything else: there is no need to remove the wood, there is no need to operate levers or switches, there is no need to change the combustion air, etc. In practice, you can also leave the house as you would with a classic fireplace, being careful not to leave the door open or flammable materials in the immediate vicinity. It is advisable to keep the door closed also to have a greater yield but nothing prevents you from keeping it open for cooking food or using the fireplace stove as a barbecue without any risk of smoke or bad smells in the house. Charges can be made of any size without fear of boiling or other anomalies: autonomy is based on the charge. The ash can be removed once a week as this new series has an even larger compartment and produces even less. The glass can be cleaned from once a day to once a week depending on the humidity of the wood and the draft in the flue. The hydrothermal aspect is managed automatically directly by the control unit, therefore it is not necessary to activate switches and stop keys and neither is it necessary to make adjustments or manual interventions of any kind. From a safety point of view, once the closed fireplace has been installed according to the instructions given in the instruction manual, no dangerous situations can arise under any conditions (except those of a normal fireplace). Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Wood-burning fireplace NEW VULCANO 25 vertical retractable 2 exchangers with control unit included VOLCANO The Vulcano closed fireplace is a modern, efficient, functional, aesthetically pleasing product, with management suited to today's needs and capable of combining these factors with the history and tradition of a century-old product such as the fireplace. Structure The structure is made of thick steel. The walls are smooth and free from mechanisms. The secondary exchangers are made of copper and are placed in a bain-marie in the interspaces of the primary. The painting is made with epoxy powders suitable for high temperatures. Plant engineering The plant engineering capacities are completely similar to fossil fuel boilers: it can feed any type of heating system, with any type of piping, with any type of circuit: open, closed or mixed, it can work alone or in combination with other boilers. Heating The thermal performance is also similar to fossil fuel boilers. In fact, it can correctly heat homes up to 320 m2, in any climatic zone and any energy class they belong to. Hot water The hot water supply is superior to the best instantaneous boilers and its flow is constant. Furthermore, each model has an internal supply proportionate to its power which allows it to guarantee the supply for several hours even with the fire off. You consume The new models have even greater efficiency which allows them to consume about a third of the gas boilers and less than half of the pellet ones for the same amount of heat supplied. Management Charges of any size can be carried out, it does not need to be looked after, it can be used for cooking food or as a barbecue, the ash can be removed 1-2 times a week and the same goes for cleaning the glass. The smoke duct should be cleaned 1-2 times a year. Models Four models are produced, suitable for heating surfaces from 50 to 320 m2. The choice must be made according to the indications given in the table below. Installation The installation of Vulcano fireplace stoves is simple, fast, legal and within the reach of all installers. This is due to their ability to directly perform all the functions that may be required: heating, hot water, interface with other boilers, etc. Once the model suitable for your needs has been purchased, it can be connected directly: without boilers, exchangers and various kits. To give you a better idea, we report some drawings of the most common installations of the three series. The figures with boilers refer to when they already exist or are needed for other generators or for specific needs. Usage The use of the Vulcano closed fireplace is very simple: even simpler than the classic fireplace. In fact, once loaded it does not need anything else: there is no need to remove the wood, there is no need to operate levers or switches, there is no need to change the combustion air, etc. In practice, you can also leave the house as you would with a classic fireplace, being careful not to leave the door open or flammable materials in the immediate vicinity. It is advisable to keep the door closed also to have a greater yield but nothing prevents you from keeping it open for cooking food or using the fireplace stove as a barbecue without any risk of smoke or bad smells in the house. Charges can be made of any size without fear of boiling or other anomalies: autonomy is based on the charge. The ash can be removed once a week as this new series has an even larger compartment and produces even less. The glass can be cleaned from once a day to once a week depending on the humidity of the wood and the draft in the flue. The hydrothermal aspect is managed automatically directly by the control unit, therefore it is not necessary to activate switches and stop keys and neither is it necessary to make adjustments or manual interventions of any kind. From a safety point of view, once the closed fireplace has been installed according to the instructions given in the instruction manual, no dangerous situations can arise under any conditions (except those of a normal fireplace). Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : New Vulcano 30-3 Fuel : Wood Water content: 123 litres Heatable surface : 120 - 220 m 2 Minimum distance from flammable materials: 18 cm Weight : 335Kg Primary exchanger Global Power: 30.3 kW Nominal thermal power: 25 kW Thermal power yielded in the water: 16,5 kW Power delivered to the environment: 8.5 kW Efficiency : 83.5 kW CO : 0.26 kW Wood consumption: 6.2 kW/h Smoke temperature: 216° Chimney minimum draft: 12 Pa Combustion gas volumetric flow: 21.5 g/s Maximum water pressure allowed: 1.5 bar Load loss: mt 0,1 H 2 O Secondary exchangers Global Power: 30.3 kW Nominal thermal power: 25 kW Thermal power yielded in the water: 15 kW Power delivered to the environment: 10 kW Efficiency : 83 kW CO : 0.223 kW Wood consumption: 6.2 kW/h Smoke temperature: 224° Chimney minimum draft: 12 Pa Combustion gas volumetric flow: 21.6 g/s Maximum water pressure allowed: 6 bar Head loss: mt 1,8 H 2 O NEW VULCANO New generation fireplaces Vulcano produces a single range of fireplaces with four different capacities, suitable for heating surfaces from 0 to 320 m 2 . All models have the same aesthetics, but the overall dimensions, weight and water content change. Each model can be requested on the basis of individual system requirements: with only the primary exchanger, with the primary and one secondary, with the primary and two secondary. Since the exchangers are all inside the fireplaces, in order to identify them, the number of exchangers contained is added to each code The right choice As regards the model suitable for the size of the house, one can use the table below, being careful not to exceed the minimum or maximum limits. The fireplace stove should be chosen on the basis of the size of the home and the needs of the system built or to be built Heating Vulcano was not born to give only an aid to the main heating. Instead, it was created to provide homes with all the heat they need. The fireplaces heat homes up to 300m 2 in a completely autonomous way, without any need to be helped by other generators. This is also true in very cold areas or in poorly insulated houses. The heating is supplied through the existing system, whatever it is. The new models are equipped with a special thermal flywheel which makes them particularly suitable for underfloor systems as well Domestic hot water The Vulcano closed fireplace gives hot water in large quantities and at high temperatures as and more than the best gas boilers. It is also equipped with an internal stock with which it guarantees the supply for several hours, even in the absence of fire. In practice: by carrying a load of wood in the morning, hot water is covered for the whole day. By charging in the evening, hot water is also available for the next day. All directly, without exchangers or additional boilers. Therefore we can certainly state that during the period of use of the Vulcano closed fireplace the gas boiler will almost always remain off and costs will drop dramatically and performance will increase It can also be lit from above Thermo fireplaces perform two distinct functions: that of boiler and that of fireplace. Vulcano is the only one to absolve both without penalizing either of them. In terms of fireplace, Vulcano works naturally like a classic fireplace. Its use is simple, pleasant and within everyone's reach. Volcano can be loaded in any way. Even by placing the wood one on top of the other as if you wanted to stack it. Combustion will be excellent in any case. It can be loaded with both small and large loads of wood. A good charge guarantees 6 or 7 hours of heating autonomy and 12 to 24 hours of hot water Vulcano burns anywhere in the combustion chamber, both in the center and on the sides. Once the flame has been ignited, the wood burns slowly and constantly until it is completely exhausted, without any need for manual intervention. During the entire phase that goes from ignition to extinguishing the fire, the wood remains motionless. Therefore there is no risk of it falling or even crashing against the glass of the door. Once the charge is exhausted, a layer of embers remains which covers the entire surface of the fireplace. It's the best time for barbecue lovers. From a boiler point of view, Vulcano has the same performance as a gas boiler both in the heating and domestic hot water functions and its management is also extremely simple You consume Autonomy The above data refer to an autonomy of about 6 hours and wood with humidity around 20% The Electronic Control Units The Vulcano control units for fireplaces automatically manage any system situation. To avoid incorrect settings, they are factory calibrated to the best possible operating conditions. Each control unit is equipped with an explanatory sheet containing the wiring diagram, the connection points, the blocks with which it is equipped and the relative functions. The connection points are also shown on the terminal board The display lock allows you to view the temperature present in the closed fireplace: up to 29° you see two dashes, from 30° to 98° you see the degrees, at 99° they become intermittent. In the descending phase at 97° they become fixed again, at 29° the dashes reappear The pump block starts and stops the circulator in three ways. Automatic: between 55° and 59° intermittently, over 59° continuously; in descending phase: up to 60° continuously, below intermittently, at 53° stationary In the antifreeze function the control unit activates the circulator at 4° and stops it at 5°. Between 5° and 54° it can also be operated manually. Outside these temperatures it goes automatically The alarm block it signals the boiling of the closed fireplace by means of the acoustic signal and by the flashing of the degrees on the display. The heating block allows you to automatically alternate the closed fireplace with other boilers between 55° and 53° The summer- winter block allows you to select between the supply of hot water only and the simultaneous hot water - heating function The hot water block allows you to control any solenoid valves to alternate the supply of hot water between the closed fireplace and other producers. The alternation takes place between 43° and 44° All models are equipped as standard Sheet metal protection with a special treatment Door with vertical retractable opening and external arm with ceramic glass resistant to 750° Adjustable feet for levelling Tool for cleaning internal smoke passages Instruction booklet Certifications and attestations Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less