General characteristics Brand: Atlantic EAN: 3410538540195 Capacity: 80L Model: COMBI MG LT 80 Category: Vertical Model: 854019 Data sheet Capacity (L): 80 Voltage (V): 230 (220-240) Energy consumption (KWh/24h): 1.63 Maximum use temperature: 90°C Working pressure (bar): 8 Coil internal volume (l): 2.7 Coil surface (m3): 0.35 Pressure drop at 2m3/h (mm bar): 20 Pressure drop at 1m3/h (mm bar): <15 Test pressure (bar): 6 Max working pressure of the coil (bar): 12 Heating time ΔT 20°C secondary 45°C: 1h18 Heating time ΔT 50°C secondary 45°C: 3h14 Primary power (Kw) at 90°C with 2m3/h secondary at 45°C: 17.5 Primary power (Kw) at 80°C with 1m3/h secondary at 45°C: 12 Continuous speech (l/h) primary at 90°C with secondary 2m3/h at 45°C: 431 Flow rate in the first 10 min. (l) primary 90°C 2m3 secondary 45°C: 93 Warm-up time Primary 90°C with 2m3/h (ΔT=30°C): 9 Primary 90°C with 2m3/h (ΔT=50°C): 20 Primary 80°C with 1m3/h (ΔT=30°C): 14 Primary 80°C with 1m3/h (ΔT=50°C): 34 Electricity consumption (W): 190 Dimensions A: 791 B: 590 C:251 Q: 457 E: 165 F: 451 Ø: 433 Net weight (Kg): 22 Load profile: L Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: Bandini ST 50 Thermal dispersion 65° (KWh/24h): 0.98 Electric Power: 1200W Voltage (V): 230 Heating time (Δt 50°): 170' Maximum Operating Temperature (C°):75 Maximum Operating Pressure (bar): 8 Humidity protection: IPX4 Insulation class: l Profile: M Energy Class: C Dimensions: A(510); B(460); C/E:(100-175); F(130); G(250); H(20); l(130); M(240). Warranty: 2 years General characteristics VERTICAL ST Wall mounted thermoelectric storage water heater, 50 litres, vertical installation, with heat exchanger. - Internal coil. - Available with right and left attachments. - Glass-porcelain internal boiler. - Polyurethane foam insulation. - Magnesium anode. - Armored resistance in copper. - Flange. - Double safety thermostat. - External thermometer. - Safety valve. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

General characteristics Brand: Atlantic EAN: 3410538212481 Data sheet Absorbed power (W): 1200 Voltage (V): 230 (220-240) Energy consumption (kWh/24h at 65°C): 0.58 Heating time at 35°C (Δt=20°C): 0h19 Heating time at 60°C (Δt=50°C): 0h47 Dimensions H:399 Ø: 338 A: 163 B:163 C:236 Q: 81 E: 345 F: - G: - Inspection flange (Ø-mm): 72 Net weight (Kg): 9 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: ITEM OUT OF PRODUCTION, IN ITS ABSENCE IT WILL BE REPLACED WITH THE NEXT MODEL THERM 4204 Technical features Product data for energy consumption - according to requirements of EU regulations no. 811/2013 and 812/2013 to complete the directive 2010/30/EU LPG code: T4200 14-2 31 Water heating energy efficiency class B Declared load profile L Open chamber with natural draft Nominal heat output (Pn) [kW] 23.6 Nominal heat input (Qn) [kW] 27 Max water flow with ΔT 25 °C [l/min] 14 Max water flow with ΔT 25 °C [l/min] 7 sound pressure max. [dB(A)] 69 Weight (without packaging) [kg] 14 Dimensions (H x W x D) [mm] 655 x 350 x 228 Junkers Bosch water heaters With Junkers Bosch gas and heat pump water heaters you are assured of the best technology for the production of domestic hot water, always available and perfectly tailored to the user's needs: high quality, maximum efficiency and safety, ease of installation and control savings on bills. What to ask for more? Whatever your choice, choose quality. The wide range of Junkers Bosch gas and heat pump water heaters is able to meet the needs of your customers, to whom you can offer the most suitable solution for their home. Junkers Bosch gas water heaters are available in numerous models, to meet the most diverse needs: from the smallest ones, also suitable for being inserted in kitchen wall units, to those specifically designed for outdoor installation or for large buildings. Today it is possible to satisfy domestic hot water needs also through renewable energy sources: this allows not only economic savings, but also a contribution to environmental protection. Junkers Bosch heat pump water heaters are able to supply all the hot water needed in an efficient, convenient and sustainable way, obtaining energy from the external environment and using it to heat the water. Whatever your customers' requests, with Junkers Bosch you are sure to guarantee the best response. Environmentally friendly efficiency Choosing a gas water heater can also take advantage of renewable energy sources: all gas water heater models can be fully integrated, thanks to the Solar Kit accessory, in new or existing thermal solar systems, for exploit the inexhaustible energy of the sun for the production of domestic hot water. General characteristics THERM 4200 THERM 4200, the instantaneous gas water heater with compact dimensions, which reduces consumption and helps to protect the environment. Advantages ▶ Guarantees maximum safety thanks to a triple system which includes the smoke outlet sensor, the temperature limiter and the flame ionisation control (which interrupts the gas flow in the event of ignition failure or accidental shutdown). ▶ Easily adjusted using the intuitive control panel ▶ It can be connected directly to solar thermal systems for the production of domestic hot water Characteristics ▶Electronic ignition by batteries ▶Continuous flame modulation ▶Works even in case of very low water pressures ▶Extremely compact size The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, in order to be placed on the market, heating and hot water production systems will have to comply with the ErP (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of the appliances, favoring their comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating and domestic hot water production. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding less performing technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent concrete help for the consumer, allowing him to learn more about the characteristics of the system, acquire greater awareness of the energy savings allowed and make the best choice of what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the former is supplied by the manufacturer together with the product for heating and/or domestic hot water production appliances the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing the score attributed to each appliance to increase and increasing the energy class of the system: it is therefore the task of whoever makes/installs the system to supply the consumer the correct explanatory label. The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on home consumption, approximately 80% of which is due to heating and the production of hot water, and are already being incentivized at a tax level today. Junkers Bosch is already in line with the dictates of the ErP legislation, demonstrating the future orientation that has always distinguished the brand. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Product name GAS WATER HEATER VAILLANT ATMOMAG MINI 11-0/1 XI METHANE. Open Room WITH NATURAL DRAFT Technical specifications ErP energy class: Class A Nominal heat output: 19.2 kW DHW direct withdrawal range T = 25C: 2.5 - 11 l/min Chamber Open to natural draught Ignition: electronic Compact dimensions (HxWxL): 580/255/310 mm Power supply: METHANE General characteristics AtmoMAG MINI Instantaneous water heaters with electronic battery ignition. AtmoMAG XI are natural draft water heaters with electronic ignition powered by batteries. Saving safety without electric energy aids. The Direct Start system allows for faster ignitions. Ionization flame detection ensures operational safety. The adoption of the OPTI MOD system for flame regulation allows you to adapt the water temperature to the changing seasons with a quick gesture. In the mini version, features and functions remain unchanged and the small dimensions become the motif of choice in some living situations. atmoMAG XI (hot water production) the atmospheric version with DHW flow rate of: 14 litres/minute Natural gas LPG atmoMAG XI mini (hot water production) the atmospheric version with DHW flow rate of: 11 litres/minute Natural gas LPG Compact size Manual range selector Automatic flame modulation LCD display Domestic hot water Power selectable on 10 levels Ionization flame control New hydraulic unit Exchanger with Supral protection ErP and ELD: what they mean and how they differ ErP: The EU has issued new obligations for Energy Using Products (ErP). The new directive, known as the Ecodesign directive, prescribes the minimum efficiency requirements and emission limits for appliances that produce heating and domestic hot water. The Ecodesign directive addresses two categories of relevant products for installers and retailers in the sector: Category 1 includes space heaters; in particular: electrical, gas and diesel appliances such as boilers, heat pumps and cogenerators. Category 2 Includes appliances for the production of domestic hot water: electric, gas, diesel such as water heaters, heat pumps for DHW, solar systems up to 400 kW and boilers up to 2000 litres. ELD : in addition to the ErP directive, the EU has also introduced a mandatory energy labeling for the same type of appliances up to 70 kW and boilers up to 500 litres. The energy labeling directive is called ELD and requires that new products and systems for heating and domestic hot water production are labeled with an indication of their energy efficiency class. By combining products and components, for example by adding a temperature control unit, the energy classification of the system can be increased, which will be calculated by the installer and indicated on the package label. Product warranty For sale on our site they are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

GAS WATER HEATER ARISTON NEXT OUTDOOR 16 EU LPG - new ErP model Product code: 3632258 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: XL profile Characteristics of heating/DHW operation: CE certification (pin) 0051CM4090 Category II 2H3P Nominal thermal power kW 28.0 Minimum thermal power kW 5.0 Modulation range 1 : 5.6 Nominal heat input kW 31.0 Min/max temperature selectable 35-70 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow l/min > 2.0 Flow rate (ΔT 25°C) l/min 16.0 Supply voltage (frequency 50 HZ) V 230-50 Maximum absorbed power W 48 Minimum ambient temperature of use °C -20 Electrical protection type IPX5D Dimensions (HxWxD): 563 x 350 x 130 mm Weight: 12.8kg Power supply: LPG Next Outdoor EU The generation of gas water heaters for outdoor use Next Outdoor, the new instantaneous gas water heater for outdoor use. Featuring an exclusive design, small size (only 13cm deep!) and new features. Next outdoor offers maximum temperature stability thanks to the electronic modulation of the gas and the fan, the wide modulation ratio between the maximum and minimum power, and the automatic water flow regulator. With the bathroom function, Next outdoor allows you to have the ideal quantity and temperature for maximum relaxation. Thanks to the introduction of the PROFESSIONAL 20 and 24 l/min models, the Ariston range for the outdoor version is completed, without however renouncing an attractive design and the compactness that distinguishes it on the market. The Next Outdoor, thanks to the remote control, has all the functions at hand and the small size makes it easily adaptable to any type of outdoor environment. Furthermore, thanks to the models of the new PROFESSIONAL range (20 and 24 l/min) it is able to manage up to a maximum of 5 products in cascade. Next Outdoor is the most efficient in its category and can also be integrated with solar systems. Thanks to the kit with thermostatic valve, the NEXT OUTDOOR is set up for integration and management of solar systems. An ecological and clean solution to avoid waste and encourage energy saving. Characteristics: External installation type A3 It does not require a fume exhaust system Standard remote control: with the remote control it is possible to change the temperature from anywhere in the house Electronic ignition (220 v) with ionization flame sensor and consequent gas savings of up to 25% Maximum efficiency > 90% Modulation ratio 1:6 Automatic flow regulator with stepping motor Electronic thermostatic modulation for precise temperature control Minimum activation pressure at 0.1 bar Standard antifreeze function: up to -20° Cascade solution up to 5 products (only with models 20 and 24) Integration with solar thermal via thermostatic valve Small size Absolute safety thanks to the IPX5D electrical protection Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: Bandini ST 80 Thermal dispersion 65° (KWh/24h): 1.32 Electric Power: 1200W Voltage (V): 230 Heating time (Δt 50°): 260' Maximum Operating Temperature (C°):75 Maximum Operating Pressure (bar): 8 Humidity protection: IPX4 Insulation class: l Profile: M Energy Class: C size: A(700); B(460); C/E:(100-265); F(130); G(350); H(40); l(130); M(240). Warranty: 2 years General characteristics VERTICAL ST Wall mounted thermoelectric storage water heater, 50 litres, vertical installation, with heat exchanger. - Internal coil. - Available with right and left attachments. - Glass-porcelain internal boiler. - Polyurethane foam insulation. - Magnesium anode. - Armored resistance in copper. - Flange. - Double safety thermostat. - External thermometer. - Safety valve. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION In the absence of the THERM 4600 product, the subsequent THERM 5600 model will be shipped! Technical characteristics Product data for energy consumption - according to requirements of EU regulations no. 811/2013 and 812/2013 to complete the directive 2010/30/EU CNG code: T4600 S 18-D 23 Water heating energy efficiency class A Declared load profile XL Forced draft sealed chamber Nominal heat output (Pn) [kW] 31.6 Nominal heat input (Qn) [kW] 34 Power setting/modulation range (Pn,min. - Pn,max.) [kW] 4.8-31.6 Max water flow with ΔT 25 °C [l/min] 18 Max water flow with ΔT 35 °C [l/min] 19 Efficiency at 100% rated power (on PCI) [%] 92 Power supply [V(AC)] 230 Maximum absorbed power [W] 100 Degree of electrical protection [IP] IPX4D Weight (without packaging) [kg] 12 Dimensions (H x W x D) [mm] 568 x 364 x 175 Junkers Bosch water heaters With Junkers Bosch gas and heat pump water heaters you are assured of the best technology for the production of domestic hot water, always available and perfectly tailored to the user's needs: high quality, maximum efficiency and safety, ease of installation and control savings on bills. What to ask for more? Whatever your choice, choose quality. The wide range of Junkers Bosch gas and heat pump water heaters is able to meet the needs of your customers, to whom you can offer the most suitable solution for their home. Junkers Bosch gas water heaters are available in numerous models, to meet the most diverse needs: from the smallest ones, also suitable for being inserted in kitchen wall units, to those specifically designed for outdoor installation or for large buildings. Today it is possible to satisfy domestic hot water needs also through renewable energy sources: this allows not only economic savings, but also a contribution to environmental protection. Junkers Bosch heat pump water heaters are able to supply all the hot water needed in an efficient, convenient and sustainable way, obtaining energy from the external environment and using it to heat the water. Whatever your customers' requests, with Junkers Bosch you are sure to guarantee the best response. Environmentally friendly efficiency Choosing a gas water heater can also take advantage of renewable energy sources: all gas water heater models can be fully integrated, thanks to the Solar Kit accessory, in new or existing thermal solar systems, for exploit the inexhaustible energy of the sun for the production of domestic hot water. General characteristics THERM 4600 S Therm 4600 S is the extremely compact instantaneous gas water heater and thanks to its high efficiency it guarantees reduced consumption Advantages ▶ Comes with an easy and intuitive backlit LCD display ▶ It can be connected directly to solar thermal systems for the production of domestic hot water ▶ Guarantees reduced gas consumption thanks to the electronic temperature control ▶ Thanks to the OptiFlow patent, it automatically recognizes the lengths of the flue gas intake and exhaust system Characteristics ▶ Flame ionisation electronic ignition ▶ High efficiency and wide modulation range (1:7) ▶ Works even in case of very low water pressures ▶ Extremely compact dimensions ▶ Indoor installations The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, in order to be placed on the market, heating and hot water production systems will have to comply with the ErP (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of the appliances, favoring their comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating and domestic hot water production. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding less performing technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent concrete help for the consumer, allowing him to learn more about the characteristics of the system, acquire greater awareness of the energy savings allowed and make the best choice of what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the former is supplied by the manufacturer together with the product for heating and/or domestic hot water production appliances the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing the score attributed to each appliance to increase and increasing the energy class of the system: it is therefore the task of whoever makes/installs the system to supply the consumer the correct explanatory label. The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on home consumption, approximately 80% of which is due to heating and the production of hot water, and are already being incentivized at a tax level today. Junkers Bosch is already in line with the dictates of the ErP legislation, demonstrating the future orientation that has always distinguished the brand. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Open chamber water heater Junkers Minimaxx Hydropower 18 liters WR-18 2B gpl Catalog code: WR 18-2 B Declared load profile: XL Open chamber with natural draft Nominal heat output: 30.5 kW Nominal heat input: 34.5 kW Flow rate of water supplied with DT 25 °C: 17.6 l/min Maximum working pressure: 12 bar Degree of protection: IPX4D Dimensions (LxWxH): mm 220 x 425 x 655 Version: gpl Minimaxx MINIMAXX HYDROPOWER, thanks to the innovative hydrodynamic generator, defines a new technological standard. The energy needed to switch on the water heater, with open chamber and natural draft, comes directly and exclusively from the water flow which drives an internal turbine generator (HDG-HydroDynamic Generator) which generates the electric current needed to switch on the burner. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Electric water heater ISEA SWING Plus 80 liters VE Vertical 5 year warranty Ferroli group Model: Indoor unit catalog code: E300137I Model: 80 l vertical Warranty: 5 Years Tank capacity: 80 liters Voltage: 220-240V Electric Power: 1200W working pressure: 0.8Mpa Steel thickness: 18/10 mm Insulation thickness: 18mm Heating time: 20°-55° 2h 3min Degree of protection: IP24 Swing The medium-capacity ISEA electric water heaters, available from 50 to 150 litres, both vertical and horizontal, represent the ideal solution for meeting household hot water production needs. These appliances, offered in the SWING and SWING PLUS variants, contain all ISEA technology and experience to guarantee maximum efficiency, energy savings and long product life. All medium-sized water heaters are designed for wall mounting. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Nominal capacity 115l Energy class B L withdrawal profiles Thermal power 5.5 kW Useful power 5.12 kW Heating time (ΔT= 45°C) 48 min Nominal pressure 8 bar Dimensions: General characteristics SGA BF X Low NOx: ErP compliant 09/26/2018 Operation without electrical connections Enamelled boiler Magnesium anode Piezo ignition system Prepared for LPG transformable methane gas (nozzle kit included) Coaxial smoke outlet diam. East. 100mm, length. max. 900mm Operation even at minimum water pressures Triple safety valve Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Must+ 100 Product code : A7110911 Capacity : 100 litres Installation : Horizontal Energy Efficiency Class: C Power : 1500W Voltage : 230V Adjustable thermostat : External Load profile : L Dimensions and weight Dimensions (Height x Diameter): 1018x433 mm Weight : 21.4Kg Baxi Electric Water Heaters MUST+ Line The philosophy that has always guided Baxi is to propose technologically advanced but easy-to-use solutions, offer a 360° service and develop products that meet the needs of users. From this point of view, the wide range of products that has brought Baxi to the leading role in the heating market takes shape: in addition to boilers and heating systems, Baxi has developed a wide range of electric water heaters with capacities from 10 to 100 litres, available both rapid and accumulation with capacities from 10 to 100 liters and the possibility of both vertical and horizontal installation . The labeling regulation (EU Regulation 2017/1369) requires water heaters to be labeled according to a decreasing energy scale ranging from A+ to F. The energy class, identified by a letter, expresses a range of efficiency values ​​within which the one expressed by the product in question resides. The label was created to allow the final consumer, by providing true and comparable data, to make informed choices by targeting high-efficiency products Main features • 5 year guarantee • Boiler in glass-porcelain steel • Temperature regulation with external knob • STANDARD ohmic protection (reduced magnesium anode consumption) • Protective dielectric joint • CFC-free polyurethane insulation • Analog thermometer • Operating light • IP24 degree of protection Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less