Technical features Model : Turbomag 17-2/0-5 Product code : 311425 Power supply: LPG Performance Nominal thermal power: 29.0 kW Reduced thermal power: 8.6 kW Nominal heat input: 32.9 kW Smoke temperature after draft break with Pn C 204 Smoke temperature after draft break with Pr C 137 Mass flow rate of fumes with Pn g/s 12.9 Mass flow rate of fumes with Pr g/s 8.9 CO 2 content in fumes with Pn : 6.9% Microaccumulator capacity: 3.2 litres Domestic hot water direct withdrawal range Δ T = 35 C l/min 2.2 - 12 Minimum pressure required for ignition: 0.2 bar Maximum temperature that can be set for domestic hot water: 63° C Minimum settable domestic hot water temperature C : 38° C Class of merit according to the European standard EN 13203: *** Maximum operating overpressure: 10.0 bar G20 methane gas consumption: 3.45 m 3 /h G30 liquid gas consumption: 2.59 kg/h Gas pressure upstream of the methane appliance: 20 mbar Gas pressure upstream of the LPG appliance (Butane/Propane): 30/37 mbar Power supply V/Hz 230/50 Total max absorbed electric power: 108 W Hot water fittings R 1/2" Inch Cold water fittings R 1/2" Inch Natural gas fittings R 1/2" Inch Liquid gas connection 12x1 mm Combustion gas/comburent air discharge connection 60/100 mm IP X4D degree of protection CE certification 1312BO3978 Dimensions and weight Dimensions (HxWxD): 742x410x370 mm Empty weight: 27.2 kg Vaillant TurboMAG water heater Quietness, Flexibility and Absolute Quality Vaillant turboMAG gas water heaters are the result of careful studies and careful planning. Each water heater is constantly monitored right from the assembly stage to ensure maximum reliability, great performance and always guarantee maximum comfort and significant energy savings. TurboMAG 17 with micro accumulator Water heater with micro storage and electronic ignition without pilot flame. Equipped with the Comfortronic system, turboMAG guarantees a constant temperature water supply for both large and small tappings. Just two knobs and a digital display make setting the temperature and viewing the operating parameters really easy. The most efficient sanitary comfort choice without installation limits Comfort ● High hot water production (up to 17 l/min) ● Hot water without sudden changes in temperature ● Hot water without waiting times thanks to micro storage savings ● High modulation ● Great reduction of gas consumption thanks to the flame self-modulation system ● Small size Safety ● Reliability of every single component tested by the Vaillant LabTest Simplicity ● New Touch Screen interface ● Quick replacement of previous models ● Wall drain Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION: OFFER VALID UNTIL STOCKS LAST! Overview ARISTON FAST EVO B 11 EU METHANE GAS WATER HEATER with battery Cod. 3632215 - new ErP model Open Chamber NATURAL DRAFT Technical specifications Product code: 3632215 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: profileM Characteristics of heating/DHW operation: CE certification (pin) 0063CN7240 Category II 2H3+ Type B11BS Electronic ignition Power supply: 2x1.5V LR20 batteries Chamber Open to natural draught Nominal heat output: 19 kW Minimum thermal power: 8 kW Nominal heat input: 21.5 kW Combustion efficiency (fumes): >89% Min/max temperature selectable: 35-65C Flow rate (T 25C): 11 l/min Minimum operating flow: >2 l/min Dimensions (HxLxP): mm 580 x 310 x 210; 9.6kg Power supply: METHANE Main features Fast EvC/B EU Fast Evo: The new range of instantaneous gas-fired water heaters in the Open Chamber version with high efficiency and reliability standards (11,14 and 16 l/min) Simple, reliable and intuitive Fast EVO Ariston brings the evolution of the Open Chamber gas water heater to every home. High standards of efficiency and great reliability for 2 models with different types of ignition: rechargeable battery and knob for Fast EVO B and power supply cable and LCD display for Fast EVO C. Both versions ensure high performance and considerable savings in terms of consumption. the Fast EVO water heater offers numerous advantages, starting from the continuous flame modulation thanks to the NTC probe located at the exchanger outlet, which guarantees maximum temperature stability. In case of fluctuations in the water flow rate (2 l/min minimum variation threshold), the new Fast EVO, thanks to the NTC probe and the electronic card, manages to keep the temperature stable with better performance compared to the models considered top of the market. Fast EVO also equipped with water flow switch, humid chamber copper exchanger and electronic flame detection; the minimum operating pressure of 0.1 bar allows the product to operate in the most extreme conditions, while the minimum ignition flow rate is 2 l/min. Overtemperature protection makes it safer to use. Advantages: The innovative water heater available in the version with electric power cable and LCD display (FAST EVO C) or with rechargeable battery (FAST EVO B) Intuitive control panel with LCD display (model C) Continuous flame modulation thanks to the NTC probe located at the exchanger outlet (maximum temperature stability Minimum operating pressure 0.1 bar Minimum ignition flow rate 2 l/min Presence of the water flow switch "Humid chamber" copper heat exchanger Electronic detection of flame presence External temperature regulation: Allows the user to choose the temperature that best suits his needs Electronic control: Electronic control panel for easier and more immediate use. High efficiency: Product characterized by high energy performance, reduction of consumption and polluting emissions. Can be integrated with Solar : Suitable solar integration through a thermostatic valve which allows the water heater not to start in the event that the temperature of the water preheated by the solar system is higher than the desired temperature, guaranteeing high energy savings Ecodesign Directive In fact, after very long negotiations, the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, making it possible to achieve an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing boilers on the market starting from 26 September 2015. This means that starting from this date, anyone wishing to install a boiler in their own home will have to install only condensation. Only a particular type of non-condensing boiler will continue to be produced which is technically called "Open Chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings. What is energy labelling Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies on end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. From 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and hot water storage tanks ),. How to read energy labels There are different labels, based on the type and function of the product (both space and water heating, and in this case the label must bear both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise levels, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in a system. In this case it is necessary to prepare a system label in addition to that relating to the individual product. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

GAS WATER HEATER ARISTON NEXT OUTDOOR 20 EU LPG - new ErP model Technical features Product code: 3632259 Energy label specifications according to the European ErP directive Energy efficiency: Class B Load profile: XL profile Characteristics of heating/DHW operation: CE certification (pin) 0051CM4090 Category II 2H3P Nominal thermal power kW 36.1 Minimum thermal power kW 7.2 Modulation range 1 : 5.0 Nominal heat input kW 40 Min/max temperature selectable 35-70 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow rate l/min > 3.8 Flow rate (ΔT 25°C) l/min 20 Supply voltage (frequency 50 HZ) V 230-50 Maximum absorbed power W 63 Minimum ambient temperature of use °C -20 Electrical protection type IPX5D Dimensions (HxWxD): 582 x 375 x 160 mm Weight: 17.5kg Power supply: LPG or methane Next Outdoor EU The generation of gas water heaters for outdoor use Next Outdoor, the new instantaneous gas water heater for outdoor use. Featuring an exclusive design, small size (only 13cm deep!) and new features. Next outdoor offers maximum temperature stability thanks to the electronic modulation of the gas and the fan, the wide modulation ratio between the maximum and minimum power, and the automatic water flow regulator. With the bathroom function, Next outdoor allows you to have the ideal quantity and temperature for maximum relaxation. Thanks to the introduction of the PROFESSIONAL 20 and 24 l/min models, the Ariston range for the outdoor version is completed, without however renouncing an attractive design and the compactness that distinguishes it on the market. The Next Outdoor, thanks to the remote control, has all the functions at hand and the small size makes it easily adaptable to any type of outdoor environment. Furthermore, thanks to the models of the new PROFESSIONAL range (20 and 24 l/min) it is able to manage up to a maximum of 5 products in cascade. Next Outdoor is the most efficient in its category and can also be integrated with solar systems. Thanks to the kit with thermostatic valve, the NEXT OUTDOOR is set up for integration and management of solar systems. An ecological and clean solution to avoid waste and encourage energy saving. Characteristics: External installation type A3 It does not require a fume exhaust system Standard remote control: with the remote control it is possible to change the temperature from anywhere in the house Electronic ignition (220 v) with ionization flame sensor and consequent gas savings of up to 25% Maximum efficiency > 90% Modulation ratio 1:6 Automatic flow regulator with stepping motor Electronic thermostatic modulation for precise temperature control Minimum activation pressure at 0.1 bar Standard antifreeze function: up to -20° Cascade solution up to 5 products (only with models 20 and 24) Integration with solar thermal via thermostatic valve Small size Absolute safety thanks to the IPX5D electrical protection Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: SINCE THIS PRODUCT IS DISCONTINUED, THE NEW AVENIR OUTDOOR LNX MODEL WILL BE SHIPPED AT THE END OF STOCKS CHAFFOTEAUX FLUENDO AVENIR OUTDOOR WATER HEATER 24 LT EU METHANE - NEW ErP Technical features Product code: 3632266 Energy label specifications according to the European ErP directive Sanitary Energy Efficiency Class B Withdrawal profile: XXL Description: Model: 24 LT EU Professional Range Ignition: electronic flame ionization Type: Forced flow open chamber for outdoor use Dimensions (hwxd): 582 x 375 x 160mm ; 17.5Kg Operating characteristics: Nominal heat input : 47 kW Nominal heat output: 42.3 kW Methane/LPG supply pressure: 20/37 mbar Consumption - Methane/LPG max flow rate/h: 4.92/3.62 m3/h Selectable min/max temperature: 35-70°C Hydraulic characteristics: Minimum/maximum nominal pressure: 0.1/8.5 bar Minimum operating flow: 3.8 l/min Flow rate with temperature difference (∆t 25°C): 24 l/min Electrical circuit: Maximum absorbed power: 63 kW Electrical protection type: IPX5D Diet: Gas: LPG or CNG Chaffoteaux confirms its specialized expertise in the design and manufacture of high quality products and systems for environmental comfort and sanitary water, expanding the range of instantaneous gas water heaters with the professional models of Fluendo Avenir Outdoor. Fluendo Avenir Outdoor is now also available in the new 20 and 24 l/min versions which allow cascade installation of up to a maximum of five products with a special control unit. The introduction of these two new professional models, which join the 11 and 16 l/min configurations for domestic use, makes this range extremely flexible with a thermal power that can vary from 4 kW to 211.5 kW.i. External installation. Ideal for installations with smoke evacuation problems. Minimum activation pressure 0.1 bar. Overtemperature control. Standard antifreeze kit: up to -20°C. Possibility of cascade installation (up to max 5 products) with PROFESSIONAL models. Characteristics: Ease of use - The user can adjust the domestic hot water to the desired temperature between 35° and 70°C using a wired remote control for remote temperature viewing and modification. Presence in the packaging of the 30-meter cable for the remote control. Easy installation - With the new Fluendo Avenir Outdoor installation times and related costs are reduced. All this thanks to its compact size, low weight and outdoor installation. The gas water heater <35 kW for single-family use is released from the limitations of Legislative Decree 192/05. Easy maintenance - Maintenance of the water heater is facilitated by the ability to view error codes on the remote control's LCD display. The components are replaceable from the front. Dedicated filters that clean easily. High efficiency - performance above 90% efficiency thanks to pre mix technology (modulation ratio up to 1:6). Speed ​​modulation - optimization of maximum efficiency also thanks to the modulating fan. Automatic flow regulator with stepper motor - In order to obtain maximum hot water delivery stability, the automatic flow regulator reduces the water flow until the desired temperature is obtained Sanitary comfort Modulating: allows great energy savings and offers greater comfort with a stable temperature in the presence of simultaneous requests for hot water. Thermostatic: high precision NTC probes to measure the cold water inlet temperature and hot water outlet temperature. Solar kit: the thermostatic valve allows you to connect the water heater to solar systems. An ecological solution to save energy. Cascade: possibility of managing up to 5 products with a special control unit (PROFESSIONAL RANGE). Flexibility: up to 211.5 kW of thermal power. Comfort of use and installation Minimum depth of only 13 cm (models for domestic use). Compatible with solar systems for greater gas savings. Maximum security thanks to installation outside the home. Quick and easy installation thanks to the fact that it does not require a smoke outlet. Standard antifreeze kit and maximum electrical protection IPX5D. Standard wired remote control to view and change the temperature. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

JUNKERS HYDROCOMPACT OUTDOOR 18 LT mod. WTD 18 AM EO CNG IN THE ABSENCE OF THE PRODUCT, THE NEW METHANE THERM 5600 SO 18 MODEL WILL BE SUPPLIED Technical features DHW energy efficiency class (ErP) Catalog code: WTD 18 AM E Declared load profile: XL Instant gas water heater Forced draft sealed chamber Flame ionisation electronic ignition Nominal heat output: 31.6 kW Nominal heat input: 34 kW Efficiency at 100% of rated power: 92% Efficiency at 30% of rated power: 94% Flow rate of water supplied with DT 25 °C: 18 l/min Minimum operating flow: 2.2 l/min Maximum working pressure: 12 bar Minimum operating temperature with antifreeze kit: -25 °C (accessory) Remote control: accessory Display: LCD multifunction Degree of protection: IPX4D Dimensions (LxWxH): mm 175x364x568 Version: CNG General characteristics Hydrocompact Indoor: Compact gas instantaneous water heaters for indoor use Do you have little space available but don't want to give up the usual quality and comfort? HYDROCOMPACTINDOOR was born, the new compact water heater in the Junkers range: all the usual comfort in very little space! The most compact ever HYDROCOMPACT INDOOR is the smallest indoor water heater available on the market. All Junkers quality and high technology are enclosed in just 17 cm depth (12 and 15 l/min models)! Easily placed inside a wall unit of your kitchen (in compliance with current regulations), the new HYDROCOMPACT INDOOR represents the best solution for those with space problems: thanks to its extremely compact dimensions, in fact, it is able to satisfy any need of space and installation. The simplicity of great technology Thanks to the new Junkers patented Optiflow technology, HYDROCOMPACTINDOOR is able to automatically recognize the lengths of the flue gas intake and exhaust system. This intelligent system helps to increase the efficiency of the product, improving its performance and reducing consumption. The large display integrated in the appliance also makes it possible to manage and program its operation with extreme simplicity and to set the water temperature just as easily, according to the different comfort needs. Furthermore, for the more <span">demanding customers, it is possible to view all the information present on the integrated display also on the remote control (accessory). Thanks to the new patented OptiFlow technology, HYDROCOMPACTINDOOR is able to automatically calculate the combustion air flow, based on the power absorbed by the fan and the rotation speed of the fan itself. This guarantees: optimum efficiency of the appliance in all operating conditions the reduction of the minimum power without the risk of condensation forming on the heat exchanger very low levels of CO2 emissions Furthermore, the automatic adaptation of the fan speed to the installation conditions (length of the <span">intake/exhaust ducts and any obstructions) ensures simpler and faster installation. Small consumption, great performance With HYDROCOMPACTINDOOR, optimization of consumption is guaranteed! Thanks to the high efficiency and the wide modulation range (1:7) the water heater is able to adapt the gas consumption necessary to heat the water to the actual DHW withdrawal request, thus guaranteeing all the desired DHW comfort and the maximum savings. Furthermore, HYDROCOMPACTINDOOR can be directly connected to solar thermal systems for the production of domestic hot water: all the energy of the sun for maximum comfort and minimum consumption! Characteristics: Extremely compact dimensions: it is the smallest instantaneous gas water heater available on the market for indoor use <span">Automatic recognition of the lengths of the flue gas intake/exhaust system thanks to the patented OptiFlow technology Efficiency up to 94% Directly connectable to thermal solar systems for the production of domestic hot water, by means of a special TWM 20 mixing valve Easy and intuitive management, thanks to the large LCD display for adjusting the temperature and viewing information relating to the operation of the appliance Possibility of satisfying all comfort needs thanks to the completeness of the range, made up of 12, 15 and 18 l/min devices High sanitary comfort and reduction of gas consumption thanks to the electronic temperature control (stability ± 1°C) Reduction of consumption thanks to the wide modulation range (1:7) <span">Ability to remotely manage the water heater thanks to the accessory control <span">Elegant design Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

OFFER - Immergas Julius Open Chamber Water Heater 14 liters Methane 3.025675LPG DHW energy class A Maximum nominal heat input kW (kcal/h) 27.3 (23,446) Maximum useful thermal power kW (kcal/h) 24.4 (20,984) Minimum nominal heat input kW (kcal/h) 11.1 (9,588) Minimum useful thermal power kW (kcal/h) 9.8 (8,428) Specific flow rate in continuous service of domestic hot water (∆t 25 °C ) in mixing l/min 14.0 Power supply 2 x LR20 1.5V batteries Dimensions HxWxD 630x350x230 mm JULIUS ECO ULTRA COMPACT DESIGN The small overall dimensions (only 23 cm deep) allow it to be installed even in vlocali with limited spaces or inside the kitchen wall units. EXCELLENT TEMPERATURE CONTROL The modulating gas valve chokes the gas flow to the burner ensuring a consumption proportional to the quantity of domestic hot water requested by the user. ELECTRONIC BATTERY IGNITION It allows the devices to be installed even in environments without an electrical network. FIREPLACE SAFETY DEVICE In the event of insufficient chimney draft, it intervenes by switching off the water heater Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

General characteristics Brand: Atlantic EAN: 3410538511911 Capacity: 80L Model: STEATITE LT 80 Category: Vertical Data sheet Absorbed power (W): 1500 Voltage (V): 230 (220-240) Energy consumption (kWh/24h at 65°C): 1.35 Heating time at 60°C (Δt=50°C): 3h01 References: 851191 Dimensions A: 814 B: 433 C:590 Q: 451 E: 165 F: 100 to 280 G:240 Inspection flange (Ø-mm): 72 Net weight (Kg): 21 Warranty 2 years on components 5 years on the tank Description Ceramic heating element and magnesium anode = long life. Optimization of polyurethane insulation = energy saving External thermometer Diamond quality enamelling Optimized hot water outlet Magnesium anode Ceramic resistance not in contact with water Cold water inlet with diffuser Electrical resistance seat High density insulation Adjustment panel Dielectric connections Thermostat The water heater has a ceramic heating element which is not in contact with water. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview GAS WATER HEATER CHAFFOTEAUX AVENIR PLUS SFT 16 EU LPG - COMPLETE WITH FUME EXHAUST KIT: AVENIR PLUS the gas water heater with 2 - Thermostatic Sealed Chamber Water Heaters guarantees total safety and maximum comfort for the user Technical specifications Product code: 3632173 Energy label specifications according to the European ErP directive Sanitary energy efficiency Class A Withdrawal profile: XL Description: Model: AVENIR PLUS SFT 16 EU Ignition: electronic flame ionization Type: gas instantaneous water heater with 2 - Sealed chamber water heaters Operating characteristics: Nominal heat input : 31 kW Nominal heat output: 28 kW LPG gas supply pressure: 28-30/37 mbar Consumption - LPG Gas Flow Rates/Hour: 2.4 m3/h Hydraulic characteristics: Minimum/maximum nominal pressure: 0.1/8.5 bar Minimum operating flow: 2 l/min Flow rate with salttermic(t 25C): 16 l/min electrical circuit: Maximum absorbed power: 49 kW Electrical protection type: IPX4D Power supply: LPG Main features Avenir Plus AVENIR PLUS the gas water heater with 2 thermostatic sealed chamber water heaters guarantees total safety and maximum comfort for the user. The innovative design and compact size simplify use, installation and maintenance. Sanitary comfort Thermostatic: High precision NTC probes to measure the temperature at the cold water inlet and at the hot water outlet. The temperature remains stable even in the presence of variations in the water flow rate. The solar kit with thermostatic valve allows you to connect Avenir Plus to solar systems An ecological solution to save energy. Temperature control via probe. Convenience of installation use Different powers to increase the hot water flow rate (11 and 16 l/min with !t 25, C). Pressure switch for fume control. Versatile: Works perfectly with low hydraulic pressures (0.1 bar). Compatible with solar systems for greater gas savings. 2 - Sealed chamber water heaters of maximum safety for unventilated spaces. Available in 11 and 16 liter versions, natural gas and butane gas. sanitary pressure switch. energy saving and environmentally friendly Final 25% gas consumption reduction thanks to electronic ignition and flame ionization. Additional savings in gas consumption by combining the water heater with our solar systems. All ready for Energy Labeling What is it about From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy-intensive sectors: construction For placing on the European market, the eco-design directive (ErP notcome ,© Energy Related Products ,î) imposes a minimum energy efficiency for heating devices for the production of hot water in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labeling of products with a capacity of less than 70 kW will give consumers simple, recognizable information which allows for comparisons on the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and kettles placed on the market from 26 September 2015. It's about me too YES, it affects everyone: professionals and end users The information indicated on the energy label will allow professionals to recommend the right product and individuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier responsibility The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label; technical product sheet; system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold together with other additional devices; technical sheet of the system with the parts relating to the products and the system already compiled. Dealer Responsibility First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible; all appliances and/systems are always accompanied by the obligatory technical data sheets; any type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and hot water production must be equipped with the new energy label which will report the energy class and main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL Depending on the type of appliance there are different labels. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also provided in cases where a series of combined appliances is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

ATTENTION: The product is completely intact, but does not have the original packaging as it is damaged. Technical specifications Energy label specifications according to the European ErP directive Sanitary Energy Efficiency ACS: Class A Declared upload profile: XL Electricity consumption (kWh/year) and fuel (GJ/year) 8 - 18 Indoor noise levels (dB) 67 Characteristics of heating/DHW operation: Code: REU-VCM2837FFUD-LPG 2 - Forced flow sealed chamber water heaters Electronic ignition without pilot flame Can be combined with: solar panels/recirculation/accumulmax lt 1000 Fine series antifreeze -20C Installation: Internal - Villa - Apartment with multifunctional shower/whirlpool and professional installations Dimensions: mm 582x356x235 ; 20 Kgs Methane heat input Min/Max (kW) 2.8/53 Water flow t 25C Max (l/min) 28 Max operating temperature (C) 85 Minimum activation pressure (bar) 0.1 Nominal operating pressure Min/Max (bar) 2.5/10 Electric consumption normal / stand-by / antigel (W) 97 / 2 / 120 LPG version INFINITY The 17 litres/min Infinity 17i water heater is a domestic instantaneous water heater to be installed inside the home. It produces hot water only in response to a real request (only when the tap is opened). Unlike a kettle, it does not need to store large quantities of water at high temperatures. This allows for great savings in terms of energy costs and water consumption . No need to mix the water, which immediately comes out at the desired temperature. NEW The installer can select the "high altitude" setting to ensure maximum performance of the water heater even when installed in the high mountains, in rarefied air conditions NEW When the water heater and the utilities are distant and heat dispersions are generated, the installer can correct the temperature according to the degree of use (from +1°C to +3°C) by perfecting the temperature at the tap NEW A progressive alert signals any limescale deposits. This allows cleaning to be carried out before the level is such as to cause a malfunction. Instantaneous gas-fired domestic hot water producer for indoor installation. Equipped with a control panel on the dashboard for managing the temperature, the degree and self-diagnosis. Anti-corrosion enamelled galvanized steel casing. Like all Rinnai water heaters, the new Infinity control the temperature to the degree and optimize comfort in the name of energy savings Temperature refinement to degree at point of use When the water heater is far from the utilities and the pipes generate heat dispersion, it is possible to correct the temperature at the tap from +1°C to +3°C Are you a home user? Register your new water heater on rinnai.it in the appropriate section to extend the warranty of your water heater to 4 years free of charge* The warranty extension (valid only on spare parts) can be requested on domestic water heaters. Consult the technical manuals to find out the details of the initiative. AT OUR HOME WE ARE FREE TO BE OURSELVES Rinnai responds to the different needs of hot water. A product available in different sizes 14 or 17 litres/minute. A studio flat, an apartment, one or more people living together. Always, an appliance that takes up very little space and offers endless hot water, giving way to what matters most Characteristics Unlimited hot water without sudden changes in temperature Electronic ignition without pilot flame Temperature control to the degree via the series controller Flow regulator: constant temperature as the flow varies Integrated automatic reset as standard Progressive LC code that detects any limescale deposits Free warranty extension on rinnai.it Functions Can be combined with solar panels Can be combined with recirculation Can be combined with max storage tank lt 500 Max 3 additional remote controls High Altitude Function Ultrathin Standard antifreeze up to -15°C Perfect temperature despite dispersions** Eco friendly Product Guarantee: All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

JUNKERS HYDROCOMPACT OUTDOOR 18 LT mod. WTD 18 AM EO LPG IN THE ABSENCE OF THE PRODUCT, THE NEW MODEL THERM 5600 SO 18 LPG WILL BE SUPPLIED Energy efficiency Flame ionisation electronic ignition Forced draft sealed chamber Nominal heat output: 25.4 kW Nominal heat input: 27.5 kW Efficiency at 100% of rated power: 92% Efficiency at 30% of rated power: 94% Characteristics flow rate of water supplied with DT 25 °C: 15 l/min Maximum working pressure: 12 bar Minimum operating temperature with antifreeze kit: -25°C (standard) Remote control: Standard Display: LCD multifunction (in remote control) Degree of protection: IPX5D Dimensions Dimensions (LxWxH): mm 170x300x568 Hydrocompact Outdoor: Compact gas instantaneous water heaters for indoor use Finally out! HYDROCOMPACTOUTDOOR the new water heater in the Junkers range specially designed for outdoors: easy to install, simple to program. Outside with tranquillity HYDROCOMPACTOUTDOOR the new water heater designed for outdoors which expands the range of Junkers solutions for the production of domestic hot water. Thanks to the standard anti-freeze device and the IPX5D electrical protection degree, which represents one of the highest protection indexes against the infiltration of water and dust, HYDROCOMPACTOUTDOOR is resistant to the cold (up to -25 C) and bad weather, without any further precautions. Simple to install and operate Replacing your appliance with the new HYDROCOMPACT OUTDOOR has never been so simple! The new Junkers water heater, in fact, does not require any suction or flue gas system. The absence of suction and discharge pipes translates into minimal masonry work and extremely reduced installation times: in a single word, greater savings! HYDROCOMPACTOUTDOOR can be easily managed from inside the home, in an easy and intuitive way, thanks to the large display of the remote control. With a simple click it is possible to program the water heater to modify the hot water temperature at any time, to always have the maximum desired sanitary comfort. Small consumption, great performance HYDROCOMPACTOUTDOOR is presented on the market with a 1 liter plus: the completeness of the range, made up of 12, 15 and 18 l/min appliances, makes it possible to satisfy all comfort needs, from the smallest to the most complex. Furthermore, thanks to the high efficiency at the wide modulation range (1:7) the water heater is able to adapt the consumption of gas necessary to heat the water to the real demand for sanitary water withdrawal, thus guaranteeing all the sanitary comfort you desire and maximum savings. Furthermore, HYDROCOMPACTOUTDOOR can be directly connected to thermal solar systems for the production of domestic hot water. Characteristics: Instantaneous water heaters, 2 - Forced draft sealed chamber water heaters, with electronic temperature control (stability, ¤ 1C) For outdoor installations It does not require aspiration/flue gas systems Resistant to bad weather thanks to the anti-gel device (up to -25 C) and the IPX5D electrical protection degree Efficiency final 94% Directly connectable to thermal solar systems for the production of domestic hot water, by means of a special TWM 20 mixing valve Management from inside the home, easy and intuitive, thanks to the remote control with large LCD display for temperature regulation and viewing of information relating to appliance operation Flexibility of installation thanks to the compact dimensions. Furthermore, installing the remote control is very easy: it is not necessary to open the product because the electrical connection cable is positioned outside the water heater. Possibility of satisfying all comfort needs thanks to the completeness of the range, made up of 12, 15 and 18 l/min appliances High sanitary comfort reduction of gas consumption thanks to electronic temperature control (stability, ¤ 1C) Reduction of consumption thanks to the wide modulation intervals (1:7) Elegant design Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Open chamber water heater Junkers Minimaxx powecontrol 14 liters WR-14 2B LPG Installation: Outdoor White color Material: Metal Length/Depth (cm): 35 Width (cm): 22 Height (cm): 65.5 Batteries Required: Yes Power (kW): 23.6 Prod hot water (l/min): 4 - 14 Combustion type: Open chamber Placement: Mural Fuel type: LPG Ideal for: Less than 150 m2 / 2 bathrooms Usage: Domestic hot water Minimaxx Maximum power in minimum space Do you need more comfort when using hot water? Is the space you have to place the water heater limited? Junkers has the solution… MINIMAXX POWERCONTROL , an ionisation water heater with compact dimensions which, thanks to the electronic-automatic ignition of the pilot flame via batteries, reduces consumption with a lower environmental impact. MINIMAXX POWERCONTROL , like all the water heaters in the Junkers range, can be integrated with thermal solar systems, with forced circulation and natural circulation. Technical features Integration with natural circulation solar thermal systems for the production of domestic hot water thanks to the new Solar Kit Possibility of satisfying all comfort needs thanks to the completeness of the range, made up of products with flow rates up to 17l/min Maximum operational safety thanks to the IPX4D electronic insulation degree Installation flexibility thanks to its small size: the 11 liter model is the smallest instantaneous gas water heater available on the market Versatility of application thanks to operation even in the presence of minimum water pressures (0.1 bar). Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION The product will be available on order and will be shipped in 10 working days! Technical features Internal Unit catalog code: ERWQ02AV3 Catalog code Outdoor Unit : EKHHP500A2V3 Energy efficiency Energy Efficiency Class: A+ Seasonal return : 123% Indoor unit Operation range Indoor Unit : 40° ~ 55° C Indoor temperature where the indoor unit is located: 2° ~ 35° C DHW characteristics Nominal Storage Volume : 485 L Maximum allowed storage water temperature: 85° C Static losses at 60° C : 1.6 kWh/24h Thermal dispersion coefficient: 1.67 W/K Potable Water Volume : 29 L Working pressure : 6 Bars Domestic hot water exchanger surface area: 6 m2 Auxiliary Electric Resistance: 2 kW Outdoor Unit Performance Thermal power at 7/55° C: 2.2 kW Outdoor Unit Air Flow Rate: 1806 m 3 /h External Unit Sound Power Level: 61 dB(A) Sound Pressure Level Outdoor Unit: 47 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R-410 Operation range Outdoor Unit : -15° ~ 35° C Installation data Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Maximum piping length: 20 m Maximum height difference Indoor Unit / Outdoor Unit: 15 m Maximum absorbed current: 6 A Dimensions and weight Internal Unit Dimensions (HxWxD): 1775x790x790 mm Indoor Unit Weight: 80 Kg External Unit Dimensions (HxWxD): 550x765x285 mm Weight of Outdoor Unit: 35 Kg Heat Pump Water Heater ECH 2 O The Daikin group, world leader in the air conditioning market, has combined its know-how in heat pump technology with heat storage technology. The combination of these two proven technologies has led to the creation of the ECH 2 O heat pump water heater, disrupting the existing hot water solutions on the market today. Composition of the set The Daikin heat pump water heater consists of 2 units: an external inverter-controlled condensing unit and a heat storage tank Comfort assured ECH 2 O heat pump water heater You can choose the 300 L or 500 L models according to your domestic hot water needs 4 adjustment modes are available to meet all consumption needs or habits > ECO mode The "Eco" mode is the cheapest solution by far. In this mode, only the heat pump works, with a significant reduction in energy consumption > AUTO mode Auto mode works in the same way as "Eco" mode. However, in case of need, the electrical resistance integrated in the system is enabled to come into operation to guarantee optimal comfort in all situations. In this mode, priority is given to thermodynamic operation to maximize the part played by the heat pump (priority to the heat pump). The "Auto" mode is ideal for a family. It is possible to program the times in which there are greater hot water needs for everyone's comfort > SILENT mode In silent mode, the heat pump outdoor unit operates at reduced power, therefore the generated sound level is lower. It is possible to choose the "Auto" program during the day and activate the "Silence" program for the night > BOOST mode If there is a need for a large quantity of hot water for a short time, the "Boost" mode can be activated. In this way, the heat pump and the auxiliary electric resistance will work simultaneously to reach the set temperature for the hot water as quickly as possible. The mode is directly accessible from the accumulation by pressing the "Boost" button. Integrated user interface The interface allows you to quickly program the ECH2 O water heater in a simple and intuitive way according to the habits of the family Energy saving This new heat pump water heater, by coupling Daikin's heat pump technology with heat storage technology, allows for significant energy savings. The units can be simply combined with solar thermal, but also interconnected with the photovoltaic system and even married with an additional auxiliary energy source Energy savings The combination of the 2 technologies, heat pump and storage, allows for significant savings: > The heat pump technology makes it possible to obtain a seasonal efficiency of 123% > The instantaneous production of hot water, together with the absence of additional energy for the water disinfection cycle , produces other gains in terms of energy consumption The new Daikin water heater therefore consumes up to 3 times less than a traditional electric water heater Optimized hot water production The thermal storage is made up of 2 layers of polypropylene between which polyurethane foam is injected to ensure perfect insulation of the water heater. In the accumulator, a corrugated stainless steel exchanger with a capacity of approximately 29 L is arranged along the entire length of the accumulator to ensure perfect stratification and maximize efficiency in water production Possible solar connection for more savings! It is possible to connect the accumulation to Solaris DB (Drain-Back) self-emptying solar panels placed on the roof of the house. Connection is simple as the ECH 2 O water heater is equipped with factory-fitted solar outlets. The advantages of the Solaris DB self-emptying solution: > Excellent heat exchange > Simplicity of installation and ease of use. Alternatively, the 500 L storage tank can be associated with Solaris P pressurized solar panels Instant production of domestic hot water Unlike traditional storage tanks, the hot water used is not stored in the storage tank, but heated instantly as it flows into the tank The open vessel storage tank is filled, during installation, with a water called "technical water": this water "stores" the energy and returns it later to heat domestic hot water. The cold mains water enters a specific corrugated exchanger and is heated according to the principle of instantaneous production The advantages of the tank: > Stainless steel ring tank exchanger which prevents the formation of limescale deposits > Plate heat exchanger, anode, expansion vessel and expansion system are not required The pluses of Daikin technology : The tank is insulated with two layers of polypropylene between which polyurethane foam (5.6 cm) is injected. This technology does not require any specific anti-corrosion protection. In the event of overflow, the water is evacuated from a discharge outlet located on the top of the tank. Polypropylene is also a guarantee of long life and robustness (shock resistance) Quality and Hygiene of Sanitary Water The absence of water storage strongly affects the quality of the sanitary water produced, which is pure. This completely eliminates any risk of legionella Modularity and flexibility The 500 liter unit has great flexibility thanks to the provision of an additional exchanger, to which it is possible to connect a pressurized solar system or an auxiliary generator, even pre-existing. Flexibility and modularity make the unit suitable for both residential and commercial solutions Ease of installation and maintenance The combination of the heat pump with the storage tank and the absence of equipment such as the expansion tank make the installation of this system much easier. The compactness also allows installation in small spaces. > Compact Product Small footprint on the ground, equivalent to that of a domestic refrigerator > Simple to fill and empty! The product has been designed to be easy to install, start up and maintain > Reduced maintenance and accessible components The absence of domestic hot water storage makes it possible to considerably reduce the maintenance of the appliance > Accessibility of tank connections The main connections of the accumulation tank (refrigerator connection and hydraulic connection) are all arranged at the top, and therefore easily accessible > Pipe length Refrigerant connections: minimum 1.5 m, maximum 20 m. Maximum height difference: 15 m Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less