ATTENTION THE PRODUCT IS NEW AND 100% WORKING, BUT IT HAS DENT ON THE SIDE AND FRONT, A PLASTIC CRACK ON THE KNOBS AND THE EXTERNAL PART SLIGHTLY DEFORMED (SEE PHOTO NEXT TO THE MAIN IMAGE) Open Chamber Gas Water Heater Hermann Saunier Duval OPALIA C 14 Low NOx LPG Electronic Ignition - NEW Model Opalia C14 14/1 Lix P ErP technical data Efficiency class A XL load profile Dimensions WxHxD : 380 x 640 x 225 mm Performance Rated power min/max kW 11.6/24.2 Continuous Flow DeltaT=25K 14.0 DHW temperature min-max 35/60 Sound power 63dB NOx class 6 OPALIA C Low NOx The gas water heaters in the Opalia C range are compact, easy to use and reliable. The Opalia C model is available in the 11 or 14 liter open chamber versions, all equipped with electronic battery ignition with safety lockout in the event of flame failure. A new burner makes it possible to reduce NOx emissions to a minimum and reach Class 6, as required by the ErP directive. Modern design and compact size - water heaters can be easily installed. Maximum safety: the safety thermostat intervenes in the event of overheating of the domestic hot water; the ionisation flame control blocks the gas supply in the event of a burner flame failure; the smoke anti-reflux safety device blocks the water heater in the event of risk of smoke emission into the environment. Low NOx emissions (class 6) Compact size Prestigious design Simplicity of management Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

ATTENTION THE PRODUCT IS NEW AND 100% WORKING, BUT IT HAS CLEAR DENT ON THE FRONT AND THE PACKAGING IS WORN (SEE PHOTO NEXT TO THE MAIN IMAGE) Electric water heater Ferroli Calypso Smart SVE 120 Liters Vertical - 2 Years Warranty Technical features Model : Calypso Smart 120 SVE Code : E500B7KA Tank capacity: 120 litres Electric Power: 1500 W Load profile : L ERP class : C Heating time (20+55°C) : 3h - 39 minutes Warranty : 2 Years Dimensions and weight : Height : 1130mm Diameter : 438mm Weight : 35KG Calypso Smart Medium Liter Electric Water Heaters Electric storage water heaters with very high efficiency, vertical and horizontal development with capacities from 50 to 150 litres. Endowed of : Electronic control of the '' SMART '' type able to optimize consumption according to the user's needs Control panel with luminous LEDs for reading the operating temperatures and operating status and convenient buttons for managing the water heater Magnesium anode to protect the tank 5-bolt flange to ensure sturdiness and facilitate periodic maintenance Safety valve set at 8 bar Supplied with three-pole electric cable without plug Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE PRODUCT IS NEW AND 100% WORKING, BUT HAS FRONT DENT AND WORN PACKAGING (SEE PHOTO NEXT TO THE MAIN IMAGE) Electric water heater Ferroli Calypso Smart SVE 120 Liters Vertical - 2 Years Warranty Technical features Model : Calypso Smart 120 SVE Code : E500B7KA Tank capacity: 120 litres Electric Power: 1500 W Load profile : L ERP class : C Heating time (20+55°C) : 3h - 39 minutes Warranty : 2 Years Dimensions and weight : Height : 1130mm Diameter : 438mm Weight : 35KG Calypso Smart Medium Liter Electric Water Heaters Electric storage water heaters with very high efficiency, vertical and horizontal development with capacities from 50 to 150 litres. Endowed of : Electronic control of the '' SMART '' type able to optimize consumption according to the user's needs Control panel with luminous LEDs for reading the operating temperatures and operating status and convenient buttons for managing the water heater Magnesium anode to protect the tank 5-bolt flange to ensure sturdiness and facilitate periodic maintenance Safety valve set at 8 bar Supplied with three-pole electric cable without plug Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE PRODUCT IS NEW AND 100% WORKING, BUT IT HAS DENT ON THE FRONT AND SIDE (SEE PHOTO NEXT TO THE MAIN IMAGE) Riello Mini 17 LN Low NOx sealed chamber water heater complete with methane fume exhaust kit Typology: Forced Draft Sealed Chamber; Model: Mini 17 LN; Sanitary energy efficiency class: A; Sanitary load profile: L; Power supply:METHANE (G20/21); Daily gas consumption: 15,175 kW/h; Sanitary Energy Efficiency: 80.2%; Annual gas consumption: 11 GJ; Emissions of nitrogen oxides (Nox): 33 mg/kWh; Hot water production Δt=30°: 13.3 litres/min; Nominal heat input: 30.0 kW; Nominal thermal power: 27.90 kW; Min/max withdrawal range: 2.5/13 litres/min; Min/max pressure: 0.2/10.0 bar; DHW temperature selection range: 36-65°C ; Supply voltage: 230/50V/Hz; Electrical protection degree: IPX4D; Dimensions: (H×W×D) 640×400×240 mm;Weight: 21 kg; Water/gas connections: 1/2” – 3/4″ Ø; RIELLO MINI From RIELLO technological research comes MINI LN, the new line of low-emission instantaneous water heaters with sealed chamber, completely renewed in design, both aesthetic and functional, able to offer maximum sanitary comfort in compliance with recent European regulations to reduce NOx emissions. The new aesthetic, elegant and linear, and the compact dimensions, allow the integration of this product in any living environment. This feature represents the ideal solution for responding to any domestic hot water production need. Prepared for installation inside the home, the new water heaters can also be installed outside, in a partially protected place, with the addition of the antifreeze kit (available as an accessory) up to a temperature of -10° c. Latest generation burner with reduced NOx emissions The new RIELLO MINI LN line is able to satisfy the most demanding requirements in terms of low emissions which will come into force from September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or less than 56 mg /kWh. The innovative hyperstoichiometric type burner allows the flame to be fed by a greater air-gas mixture than that required for combustion, resulting in a very low flame temperature. This characteristic, combined with the cooling of the burner through the water in the water heater circuit, results in a significant lowering of the polluting values ​​of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by the legislation with flying colors international. The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. The technology and the advantages of the range Innovative hyperstoichiometric and cooled burner with low emissions Wide flame modulation which allows excellent stability of the domestic hot water delivery temperature, even with minimum withdrawals Electronic ignition and ionization flame control Wide flame modulation (1 : 3) which allows perfect stability of the domestic hot water delivery temperature, even with minimum withdrawals Brand new user interface with backlit display with icons and 4 keys, to easily navigate the menu and make adjustments Abundant domestic hot water production: 11, 13 or 17 litres/min Even more compact dimensions and simple installation Mounting template and power cable supplied. Instantaneous sealed chamber water heater with methane and LPG versions Many new functions in a linear and modern design new RIELLO Mini LN are characterized by the new electronics which, combined with the modern and linear design, results in a new control panel, simple and intuitive, with many additional and innovative functions. Through a large backlit digital display (40x60 mm) and 4 command keys, the user can manage all the functions of the water heater and navigate easily in the menu. The icon language of the display makes both the general setting of the appliance and the setting of the special functions particularly intuitive, as well as immediately displaying the diagnostics of any anomalies. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE PRODUCT IS NEW AND 100% WORKING, BUT IT HAS A FRONT DENT (SEE PHOTO NEXT TO THE MAIN IMAGE) Lydos Plus 80 V/5 EU electric storage water heater Capacity 80 litres Power 1.2 kW Voltage 230V Max working temperature 80 °C Max working pressure 8 bar Net weight 16kg IPX3 protection Dimensions (height x diameter) 736X470 mm Energy class B M pick profile Lydos Plus Wall mounted electric storage water heater. The smart water heater for perfect temperature regulation. SHOWER READY The innovative structure of the internal components allows you to control the tank independently and flexibly. Up to 16% more available water.* *Maximum estimated savings depending on the model: comparison made on the basis of the V40 at maximum temperature between two Ariston products with and without WaterPlus technology. TITANSHIELD TECHNOLOGY The exclusive TitanShield technology guarantees a long life of the water heater and keeps its performance always at the top. Corrosion protection thanks to the natural properties of titanium and the action of the large magnesium anode. ECO EVO FUNCTION It allows you to save up to 14% on bills. CHARACTERISTICS Soft Touch display for reading and adjusting the temperature WaterPlus* technology: up to 16% more available water Titanium enamel Magnesium anode

Read more less

NB; IN CASE OF LACK OF PRODUCT THE THERM 5600 MODEL WILL BE SHIPPED SO JUNKERS BOSCH GAS WATER HEATER MODEL THERM 4600 SO 15 LITERS METHANE Product data for energy consumption - according to requirements of EU regulations no. 811/2013 and 812/2013 to complete the directive 2010/30/EU CNG code: T4600 SO 15-23 LPG code: T4600 SO 15-31 Water heating energy efficiency class A Declared load profile XL External installation Remote control standard standard Forced draught sealed chamber Nominal heat output (Pn) [kW] 25.4 Nominal heat input (Qn) [kW] 27.5 Power setting/modulation range (Pn,min. - Pn,max.) [kW] 3.8-25.4 Flow rate of water supplied with ΔT 25 °C [l/min] 15 Flow rate of water supplied with ΔT 35 °C [l/min] 10 Efficiency at 100% of rated power [%] 92 sound pressure max. [dB(A)] 73 Power supply [V(AC)] 230 Maximum absorbed power [W] 228 Degree of electrical protection [IP] IPX5D Weight (without packaging) [kg] 11 Dimensions (H x W x D) [mm] 568 x 300 x 170 THERM 4600 SO THERM 4600 SO is the outdoor water heater with extremely compact dimensions. It satisfies any space and installation requirement, does not require fume extraction/exhaust systems, is resistant to cold and bad weather thanks to the antifreeze device (up to -25 °C). Furthermore, it is installed outside but can be easily managed from inside the home, in an easy and intuitive way, thanks to the large remote control display (standard). Advantages ▶ It is installed outdoors and does not require fume extraction and exhaust systems ▶ Resists the cold and bad weather thanks to the standard antifreeze device ▶ It is supplied with the remote control with display for managing the operating temperature, easy and intuitive ▶ It can be connected directly to solar thermal systems for the production of domestic hot water Characteristics ▶ Instant gas water heater with sealed chamber and forced draught for outdoor use, available in the 12, 15 and 18 l/min versions; methane and LPG ▶ Flame ionisation electronic ignition ▶ High efficiency and wide modulation range (1:7) ▶ Works even in case of very low water pressures ▶ Extremely compact dimensions Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Shape Eco 100V/5 Product code: 3605178 Capacity : 100 litres Installation : Vertical Performance Power: 1,500 kW Voltage: 230V Heating time (ΔT=45°C): 3.40 Maximum temperature : 80°C Heat loss at 65°C : 0.85 kWh/24h Maximum working pressure: 8 bar Protection: IPX4 Dimensions and weight Dimensions (HxWxD): 927x476x489 mm Net weight: 27.0kg Electric storage water heater SHAPE ECO Ariston quality forever at your home Every single component is developed with the aim of guaranteeing long-lasting performance and high efficiency, with the guarantee of the Ariston brand. Every single Ariston product is rigorously tested in terms of quality, efficiency and safety before being delivered, with superior results guaranteed by our commitment. Strong and super resistant materials, components and products developed to work in extreme conditions to deliver high-level results with maximum durability. Totally safe Designed with the most modern technology and built with selected materials, Ariston water heaters are totally safe Characteristics • Exclusive design • Precise and customizable temperature regulation • Easy and immediate reset • Large size polyurethane insulation • Safety valve tested at 8 bar • Titanium enamelled boiler tested at 16 bar • 5 bolt flange Product Guarantee : All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB; IN CASE OF LACK OF PRODUCT THE THERM 5600 MODEL WILL BE SHIPPED SO JUNKERS BOSCH GAS WATER HEATER MODEL THERM 4600 SO 15 LITERS LPG Product data for energy consumption - according to requirements of EU regulations no. 811/2013 and 812/2013 to complete the directive 2010/30/EU CNG code: T4600 SO 15-23 LPG code: T4600 SO 15-31 Water heating energy efficiency class A Declared load profile XL External installation Remote control standard standard Forced draught sealed chamber Nominal heat output (Pn) [kW] 25.4 Nominal heat input (Qn) [kW] 27.5 Power setting/modulation range (Pn,min. - Pn,max.) [kW] 3.8-25.4 Flow rate of water supplied with ΔT 25 °C [l/min] 15 Flow rate of water supplied with ΔT 35 °C [l/min] 10 Efficiency at 100% of rated power [%] 92 sound pressure max. [dB(A)] 73 Power supply [V(AC)] 230 Maximum absorbed power [W] 228 Degree of electrical protection [IP] IPX5D Weight (without packaging) [kg] 11 Dimensions (H x W x D) [mm] 568 x 300 x 170 THERM 4600 SO THERM 4600 SO is the outdoor water heater with extremely compact dimensions. It satisfies any space and installation requirement, does not require fume extraction/exhaust systems, is resistant to cold and bad weather thanks to the antifreeze device (up to -25 °C). Furthermore, it is installed outside but can be easily managed from inside the home, in an easy and intuitive way, thanks to the large remote control display (standard). Advantages ▶ It is installed outdoors and does not require fume extraction and exhaust systems ▶ Resists the cold and bad weather thanks to the standard antifreeze device ▶ It is supplied with the remote control with display for managing the operating temperature, easy and intuitive ▶ It can be connected directly to solar thermal systems for the production of domestic hot water Characteristics ▶ Instant gas water heater with sealed chamber and forced draught for outdoor use, available in the 12, 15 and 18 l/min versions; methane and LPG ▶ Flame ionisation electronic ignition ▶ High efficiency and wide modulation range (1:7) ▶ Works even in case of very low water pressures ▶ Extremely compact dimensions Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

THIS ITEM WILL BE REPLACED WITH THE NEW MODEL NEXT EVO X 16 LT. COD. PRODUCT 3632433 Technical features Product code: 3632165 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: XL profile Characteristics of heating/DHW operation: Category II 2H3P Nominal thermal power kW 28 Minimum thermal power kW 5.4 Modulation range 6 - 31.0 Nominal heat input kW 31 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow l/min > 2.0 Flow rate (ΔT 25°C) l/min 16.0 Flow rate with temperature difference (Δt) 25 °C l/min 8.5 Supply voltage (Freq. 50 HZ) V 230 Maximum absorbed power W 49 Protection type IPX4D Power supply: LPG General characteristics Next Evo EU The sealed chamber instantaneous water heater Ariston launches Next Evo , the new instantaneous gas water heater for the production of domestic hot water. Characterized by an exclusive design, reduced dimensions and new functions, Next Evo is even more efficient and easy to use. The innovative electronic control of Next Evo allows you to adjust, via an intuitive LCD display, the ideal temperature for the user and to keep it constant even when the required water flow varies, thanks to the two NTC probes which measure the temperature of the both incoming and outgoing water. The central position of the smoke outlet and the extremely reduced depth (only 17.5 cm) make it extremely flexible and easy to install. Maximum energy saving is ensured by the possible integration of Next Evo with natural and forced circulation thermal solar systems: the solar kit with thermostatic valve has been designed precisely to facilitate its implementation. A new, innovative way of conceiving solar integration: versatile, practical and easy to install Characteristics: Ultra compact: only 17.5 cm deep Thermostatic: modulating temperature control via NTC probes allowing high standards in terms of energy saving and comfort Flame ionisation electronic ignition with gas savings of up to 25% compared to older generations Operation with water pressure 0.1 bar Operation even with minimum water flow rates > 2 l/min Can be integrated with solar thermal systems Presence of the smoke pressure switch Presence of the water flow switch IPX4D electrical protection Ecodesign Directive After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling? Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹. How to read energy labels There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features ErP energy class: Class A Nominal heat output: 21.3 kW DHW direct withdrawal range ΔT = 25°C: 2.5 - 11 l/min Forced draft sealed chamber Ignition: electronic Compact dimensions (HxDxL): 600x183x385 mm Power supply: METHANE General characteristics turboMAG plus Extremely compact dimensions Wide modulation range Perfect dispensing temperature stability Design and intuitive touch screen Energy efficiency class up to A depending on the model. Domestic hot water Instantaneous forced draft water heaters, with electronic ignition with wide modulation range and extremely compact dimensions: among the smallest on the market The turboMAG plus water heaters guarantee plenty of hot water immediately, always at a constant temperature and maximum operational safety. Precisely safety is the added value of this range of water heaters. The Vaillant research and development team, which has been focused on ensuring leadership in the sector for over 140 years, has developed turboMAG plus with the target of safety: in fact, 26 control to ensure maximum user reliability. The new turboMAG plus are water heaters equipped with a three-stage combustion system which broaden the modulation range ensuring perfect temperature stability during hot water delivery. A new exchanger raises the performance of the water heater which, in the 11 – 14 – 16 liters per minute versions, offers a flexible choice for every user. turboMAG plus allows 360° installation flexibility: inside apartments and also outside, resisting temperatures down to -15°C (thanks to the antifreeze accessory) and rain (IPX5D approval). A solar kit as an accessory also allows you to pre-heat the incoming water, further reducing gas consumption. turboMAG plus (hot water production) is the new version of forced draught water heaters with DHW flow rates of: 11, 14 and 16 litres/minute running on Natural Gas and LPG. Quality Continuous development since 1874: Vaillant has been accredited for its superior quality Careful selection of components that meet the highest requirements and guarantee perfect functionality Modern Design: The well-designed casing with high-quality appearance that fits perfectly into your home Total safety: 26 safety functions guarantee the functioning of the appliance Water heater interface with touch screen (IMD): Display with maximum water protection IPX5D protection : Tested with water jets up to a maximum of 12.5 l/min from all directions Flexible and efficient Exchanger with high efficiency: Water heating with minimum gas consumption and lower bill consumption Burner with high modulation : Precise regulation of the thermal power in relation to the DHW request Reduced noise thanks to fan modulation : between 2,400 and 4,800 rpm Various DHW production profiles (bath or shower): - Bath filling mode: monitoring of the filling volume - Normal: temperature setting 38-60 °C Simplified replacement: Same flue position and wall bracket, Reduced installation times High comfort 11, 14 & 16 liters of DHW production High modulation 1:4 Maximum temperature stability in DHW supply : Avoid unwanted temperature variations 3 level combustion : High modulation range 25-100% How to be ready for the new EU legislation Ecodesign Directive (ErP) 2015 What will happen from 26 September 2015? From this date it will no longer be possible to produce traditional forced draft boilers. Instead, it will be possible to continue producing condensing boilers and traditional open chamber boilers equipped with high-efficiency pumps and compliant with the new ErP requirements such as emission, noise and efficiency levels. In particular, the installation of traditional open chamber boilers will only be possible to replace old boilers installed in multi-family buildings which discharge the fumes into branched collective flues (CCR). Products placed on the market before 09/26/2015 that do not comply with the requirements of the new directive, such as traditional forced draft boilers and boilers not equipped with a high efficiency pump, can still be purchased, sold and installed. ErP and ELD: what do they mean and how are they different? ErP : The EU has issued new obligations for Energy Using Products (ErP). The new directive, known as the Ecodesign directive, prescribes minimum efficiency requirements and emission limits for appliances that produce heating and domestic hot water. The Ecodesign directive is aimed at two categories of products relevant to installers and resellers in the sector: - Category 1 includes space heating appliances; in particular: electrical, gas and diesel appliances such as boilers, heat pumps and cogenerators. - Category 2 Includes appliances for the production of domestic hot water: electric, gas, diesel such as water heaters, heat pumps for DHW, solar systems up to 400 kW and boilers up to 2000 litres. ELD: in addition to the ErP directive, the EU has also introduced mandatory energy labeling for the same type of appliances up to 70 kW and boilers up to 500 litres. The energy labeling directive is called ELD and requires that new products and systems for heating and the production of domestic hot water are labeled with an indication of their energy efficiency class. By combining the products and components, for example by adding a temperature control unit, the energy classification of the system can be increased, which will be calculated by the installer and indicated on the package label. When and how will the new rules apply? On 26 September 2015 the new rules will come into effect. Until then, neither manufacturers, retailers or installers have to comply with the new Ecodesign or labeling provisions. Once the new rules come into effect, manufacturers will only be able to manufacture products that comply with the new Ecodesign requirements, and will be required to supply an energy label with the products What do the new rules mean for the end customer? Unlike household appliances, energy labels on heating and domestic hot water products and systems can only offer a first orientation and will not necessarily provide the best solution for a certain type of installation, nor will they give indications on the assumed cost of energy when obtains a high energy classification. For example, it is not said that a heat pump which presumably will have a higher efficiency class than a condensing boiler can then actually be used in a given type of building. This is why the advice of a competent technician is still necessary to understand the label and select the best product or system that best meets the needs of your building. Product Guarantee   All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less