Technical features Model : Turbomag 17-2/0-5 Product code : 311425 Power supply: LPG Performance Nominal thermal power: 29.0 kW Reduced thermal power: 8.6 kW Nominal heat input: 32.9 kW Smoke temperature after draft break with Pn C 204 Smoke temperature after draft break with Pr C 137 Mass flow rate of fumes with Pn g/s 12.9 Mass flow rate of fumes with Pr g/s 8.9 CO 2 content in fumes with Pn : 6.9% Microaccumulator capacity: 3.2 litres Domestic hot water direct withdrawal range Δ T = 35 C l/min 2.2 - 12 Minimum pressure required for ignition: 0.2 bar Maximum temperature that can be set for domestic hot water: 63° C Minimum settable domestic hot water temperature C : 38° C Class of merit according to the European standard EN 13203: *** Maximum operating overpressure: 10.0 bar G20 methane gas consumption: 3.45 m 3 /h G30 liquid gas consumption: 2.59 kg/h Gas pressure upstream of the methane appliance: 20 mbar Gas pressure upstream of the LPG appliance (Butane/Propane): 30/37 mbar Power supply V/Hz 230/50 Total max absorbed electric power: 108 W Hot water fittings R 1/2" Inch Cold water fittings R 1/2" Inch Natural gas fittings R 1/2" Inch Liquid gas connection 12x1 mm Combustion gas/comburent air discharge connection 60/100 mm IP X4D degree of protection CE certification 1312BO3978 Dimensions and weight Dimensions (HxWxD): 742x410x370 mm Empty weight: 27.2 kg Vaillant TurboMAG water heater Quietness, Flexibility and Absolute Quality Vaillant turboMAG gas water heaters are the result of careful studies and careful planning. Each water heater is constantly monitored right from the assembly stage to ensure maximum reliability, great performance and always guarantee maximum comfort and significant energy savings. TurboMAG 17 with micro accumulator Water heater with micro storage and electronic ignition without pilot flame. Equipped with the Comfortronic system, turboMAG guarantees a constant temperature water supply for both large and small tappings. Just two knobs and a digital display make setting the temperature and viewing the operating parameters really easy. The most efficient sanitary comfort choice without installation limits Comfort ● High hot water production (up to 17 l/min) ● Hot water without sudden changes in temperature ● Hot water without waiting times thanks to micro storage savings ● High modulation ● Great reduction of gas consumption thanks to the flame self-modulation system ● Small size Safety ● Reliability of every single component tested by the Vaillant LabTest Simplicity ● New Touch Screen interface ● Quick replacement of previous models ● Wall drain Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview GAS WATER HEATER CHAFFOTEAUX AVENIR PLUS SFT 16 EU LPG - COMPLETE WITH FUME EXHAUST KIT: AVENIR PLUS the gas water heater with 2 - Thermostatic Sealed Chamber Water Heaters guarantees total safety and maximum comfort for the user Technical specifications Product code: 3632173 Energy label specifications according to the European ErP directive Sanitary energy efficiency Class A Withdrawal profile: XL Description: Model: AVENIR PLUS SFT 16 EU Ignition: electronic flame ionization Type: gas instantaneous water heater with 2 - Sealed chamber water heaters Operating characteristics: Nominal heat input : 31 kW Nominal heat output: 28 kW LPG gas supply pressure: 28-30/37 mbar Consumption - LPG Gas Flow Rates/Hour: 2.4 m3/h Hydraulic characteristics: Minimum/maximum nominal pressure: 0.1/8.5 bar Minimum operating flow: 2 l/min Flow rate with salttermic(t 25C): 16 l/min electrical circuit: Maximum absorbed power: 49 kW Electrical protection type: IPX4D Power supply: LPG Main features Avenir Plus AVENIR PLUS the gas water heater with 2 thermostatic sealed chamber water heaters guarantees total safety and maximum comfort for the user. The innovative design and compact size simplify use, installation and maintenance. Sanitary comfort Thermostatic: High precision NTC probes to measure the temperature at the cold water inlet and at the hot water outlet. The temperature remains stable even in the presence of variations in the water flow rate. The solar kit with thermostatic valve allows you to connect Avenir Plus to solar systems An ecological solution to save energy. Temperature control via probe. Convenience of installation use Different powers to increase the hot water flow rate (11 and 16 l/min with !t 25, C). Pressure switch for fume control. Versatile: Works perfectly with low hydraulic pressures (0.1 bar). Compatible with solar systems for greater gas savings. 2 - Sealed chamber water heaters of maximum safety for unventilated spaces. Available in 11 and 16 liter versions, natural gas and butane gas. sanitary pressure switch. energy saving and environmentally friendly Final 25% gas consumption reduction thanks to electronic ignition and flame ionization. Additional savings in gas consumption by combining the water heater with our solar systems. All ready for Energy Labeling What is it about From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy-intensive sectors: construction For placing on the European market, the eco-design directive (ErP notcome ,© Energy Related Products ,î) imposes a minimum energy efficiency for heating devices for the production of hot water in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labeling of products with a capacity of less than 70 kW will give consumers simple, recognizable information which allows for comparisons on the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and kettles placed on the market from 26 September 2015. It's about me too YES, it affects everyone: professionals and end users The information indicated on the energy label will allow professionals to recommend the right product and individuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier responsibility The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label; technical product sheet; system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold together with other additional devices; technical sheet of the system with the parts relating to the products and the system already compiled. Dealer Responsibility First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible; all appliances and/systems are always accompanied by the obligatory technical data sheets; any type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and hot water production must be equipped with the new energy label which will report the energy class and main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL Depending on the type of appliance there are different labels. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also provided in cases where a series of combined appliances is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

ATTENTION: The product is completely intact, but does not have the original packaging as it is damaged. Technical specifications Energy label specifications according to the European ErP directive Sanitary Energy Efficiency ACS: Class A Declared upload profile: XL Electricity consumption (kWh/year) and fuel (GJ/year) 8 - 18 Indoor noise levels (dB) 67 Characteristics of heating/DHW operation: Code: REU-VCM2837FFUD-LPG 2 - Forced flow sealed chamber water heaters Electronic ignition without pilot flame Can be combined with: solar panels/recirculation/accumulmax lt 1000 Fine series antifreeze -20C Installation: Internal - Villa - Apartment with multifunctional shower/whirlpool and professional installations Dimensions: mm 582x356x235 ; 20 Kgs Methane heat input Min/Max (kW) 2.8/53 Water flow t 25C Max (l/min) 28 Max operating temperature (C) 85 Minimum activation pressure (bar) 0.1 Nominal operating pressure Min/Max (bar) 2.5/10 Electric consumption normal / stand-by / antigel (W) 97 / 2 / 120 LPG version INFINITY The 17 litres/min Infinity 17i water heater is a domestic instantaneous water heater to be installed inside the home. It produces hot water only in response to a real request (only when the tap is opened). Unlike a kettle, it does not need to store large quantities of water at high temperatures. This allows for great savings in terms of energy costs and water consumption . No need to mix the water, which immediately comes out at the desired temperature. NEW The installer can select the "high altitude" setting to ensure maximum performance of the water heater even when installed in the high mountains, in rarefied air conditions NEW When the water heater and the utilities are distant and heat dispersions are generated, the installer can correct the temperature according to the degree of use (from +1°C to +3°C) by perfecting the temperature at the tap NEW A progressive alert signals any limescale deposits. This allows cleaning to be carried out before the level is such as to cause a malfunction. Instantaneous gas-fired domestic hot water producer for indoor installation. Equipped with a control panel on the dashboard for managing the temperature, the degree and self-diagnosis. Anti-corrosion enamelled galvanized steel casing. Like all Rinnai water heaters, the new Infinity control the temperature to the degree and optimize comfort in the name of energy savings Temperature refinement to degree at point of use When the water heater is far from the utilities and the pipes generate heat dispersion, it is possible to correct the temperature at the tap from +1°C to +3°C Are you a home user? Register your new water heater on rinnai.it in the appropriate section to extend the warranty of your water heater to 4 years free of charge* The warranty extension (valid only on spare parts) can be requested on domestic water heaters. Consult the technical manuals to find out the details of the initiative. AT OUR HOME WE ARE FREE TO BE OURSELVES Rinnai responds to the different needs of hot water. A product available in different sizes 14 or 17 litres/minute. A studio flat, an apartment, one or more people living together. Always, an appliance that takes up very little space and offers endless hot water, giving way to what matters most Characteristics Unlimited hot water without sudden changes in temperature Electronic ignition without pilot flame Temperature control to the degree via the series controller Flow regulator: constant temperature as the flow varies Integrated automatic reset as standard Progressive LC code that detects any limescale deposits Free warranty extension on rinnai.it Functions Can be combined with solar panels Can be combined with recirculation Can be combined with max storage tank lt 500 Max 3 additional remote controls High Altitude Function Ultrathin Standard antifreeze up to -15°C Perfect temperature despite dispersions** Eco friendly Product Guarantee: All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Ferroli SKY ECO 17F Low NOx gas water heater complete with LPG fume kit - NEW ERP Class (Class G - A) A XL load profile Nominal heat input Max kW 32.9 Thermal power Max / Min kW 29.6 / 11.47 Maximum working pressure 10 bar Maximum DHW production Δt 25°C / Δt 30°C l/min 17.0 / 14.2 Power supply V/Hz 230 / 50 Dimensions HxL 595x375 mm New Ferroli ECO range EFFECTIVE The ECO range has been designed according to the stringent efficiency parameters of the European ErP Directive. In practice, they are able to produce a lot of hot water at a low cost, respecting the environment and with minimal polluting emissions. They can also be integrated into a solar thermal system with extreme simplicity for maximum efficiency and comfort. EASY ECO water heaters are extremely simple to install and are interchangeable with previous series. Although very compact in size, they have been designed and built in such a way as to have easy access to the internal components for easy maintenance. BEAUTIFUL AND SMART The designers of the ECO project have created a «friendly» aesthetic that can be easily integrated with the most diverse furnishing styles. The knob or button controls have been designed to be easy to use and immediately understood. All Ferroli gas water heaters are equipped with a user interface display. Sky ECO F Sealed chamber gas water heater, with modulating thermal power and electronic control of the. Combustion. LOW NOx fume emission and SUN EASY system for direct coupling to a solar thermal system SUN EASY Easy... Cheap... Brilliant The SKY ECO range has been designed to be easily integrated with thermal solar systems, with natural or forced circulation. The temperature of the water coming from the solar circuit is constantly monitored and the water heater burner is turned on only if it is not hot enough. To reach the desired temperature, SUN EASY allows considerable savings even during the coldest seasons, exploiting and integrating even the smallest solar contribution, otherwise lost. The heart of water heaters All ECO series water heaters comply with the very strict restrictions on the emission of fumes into the atmosphere, imposed by European regulations. The burners in the ECO range use a particular technology which consists in keeping the flame temperature very low, keeping the gas trains wet. This expedient makes it possible to go well below the limits imposed by the ErP directive which sets the NOx limit at the threshold of 56 mg/kWh. Copper exchanger Interface displays Continuous power modulation - Available for operation with Natural Gas, LPG and Propane Air (50% air - 50% G31 by means of a specific transformation to be requested from the authorized assistance center at the maximum total price of 30 euros + VAT) Solar installations Also outdoor installation in protected places Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Product data for energy consumption - according to requirements of EU regulations no. 811/2013 and 812/2013 to complete the directive 2010/30/EU CNG code: T4600 S 15-D 23 Water heating energy efficiency class A Declared load profile XL Forced draft sealed chamber Nominal heat output (Pn) [kW] 25.4 Nominal heat input (Qn) [kW] 27.5 Power setting/modulation range (Pn,min. - Pn,max.) [kW] 3.8-25.4 Max water flow with ΔT 25 °C [l/min] 15 Max water flow with ΔT 35 °C [l/min] 10 Efficiency at 100% rated power (on PCI) [%] 92 sound pressure max. [dB(A)] 66 Power supply [V(AC)] 230 Maximum absorbed power [W] 100 Degree of electrical protection [IP] IPX4D Weight (without packaging) [kg] 11 Dimensions (H x W x D) [mm] 568 x 300 x 170 Junkers Bosch water heaters With Junkers Bosch gas and heat pump water heaters you are assured of the best technology for the production of domestic hot water, always available and perfectly tailored to the user's needs: high quality, maximum efficiency and safety, ease of installation and control savings on bills. What to ask for more? Whatever your choice, choose quality. The wide range of Junkers Bosch gas and heat pump water heaters is able to meet the needs of your customers, to whom you can offer the most suitable solution for their home. Junkers Bosch gas water heaters are available in numerous models, to meet the most diverse needs: from the smallest ones, also suitable for being inserted in kitchen wall units, to those specifically designed for outdoor installation or for large buildings. Today it is possible to satisfy domestic hot water needs also through renewable energy sources: this allows not only economic savings, but also a contribution to environmental protection. Junkers Bosch heat pump water heaters are able to supply all the hot water needed in an efficient, convenient and sustainable way, obtaining energy from the external environment and using it to heat the water. Whatever your customers' requests, with Junkers Bosch you are sure to guarantee the best response. Environmentally friendly efficiency Choosing a gas water heater can also take advantage of renewable energy sources: all gas water heater models can be fully integrated, thanks to the Solar Kit accessory, in new or existing thermal solar systems, for exploit the inexhaustible energy of the sun for the production of domestic hot water. General characteristics THERM 4600 S Therm 4600 S is the extremely compact instantaneous gas water heater and thanks to its high efficiency it guarantees reduced consumption Advantages ▶ Comes with an easy and intuitive backlit LCD display ▶ It can be connected directly to solar thermal systems for the production of domestic hot water ▶ Guarantees reduced gas consumption thanks to the electronic temperature control ▶ Thanks to the OptiFlow patent, it automatically recognizes the lengths of the flue gas intake and exhaust system Characteristics ▶ Flame ionisation electronic ignition ▶ High efficiency and wide modulation range (1:7) ▶ Works even in case of very low water pressures ▶ Extremely compact dimensions ▶ Indoor installations The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, in order to be placed on the market, heating and hot water production systems will have to comply with the ErP (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of the appliances, favoring their comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating and domestic hot water production. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding less performing technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent concrete help for the consumer, allowing him to learn more about the characteristics of the system, acquire greater awareness of the energy savings allowed and make the best choice of what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the former is supplied by the manufacturer together with the product for heating and/or domestic hot water production appliances the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing the score attributed to each appliance to increase and increasing the energy class of the system: it is therefore the task of whoever makes/installs the system to supply the consumer the correct explanatory label. The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on home consumption, approximately 80% of which is due to heating and the production of hot water, and are already being incentivized at a tax level today. Junkers Bosch is already in line with the dictates of the ErP legislation, demonstrating the future orientation that has always distinguished the brand. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview GAS WATER HEATER JUNKERS THERM 6000i S mod. WTD12-2 COMPLETE WITH FUME KIT 12 LT BLACK CNG NEW Cod. 7 736 503 623. Technical specifications DHW energy efficiency class (ErP): A Model: WTD12-2 Declared loader profile: M Gas instantaneous water heater 2 - Forced draft sealed chamber water heaters Nominal heat output: 20.8 kW Nominal heat input: 22.5 kW Efficiency 100% of nominal flow rate (%) 91.5 Rendimental 30% of nominal flow rate (%) 94 Water flow rate supplied with DT 25 C: 12 l/min Minimum operating flow: 2.4 l/min Operating pressure min-max: 0.1-12 bar Dimensions (LxWxH): 623 x 300 x 195mm - 13kg METHANE power supply Main features THERM 6000i S You would say that a water heater The Therm 6000i S water heater stands out for its tempered glass front, available in both the black and white versions, the small size and the integrated digital display, simple and intuitive to use with a soft touch control. The Therm 6000i S water heater can also be controlled via its Bosch Water app using smart devices (smartphones and tablets) connected via Bluetooth,¸. Winner of the 2015 Red Dot awards The Red Dot Design Award is one of the largest and most important design awards, honoring the exceptional quality of the world's best design products since 1954. Red Dot award-winning products are always characterized by a high degree of innovation and superior quality. Features list One touch is enough to get hot water at the right time The first gas water heater with a refined modern design, equipped as standard with a technology that allows connectivity to smart devices in the home via Bluetooth connection. Exclusive design The Therm 6000i S water heater stands out for its innovative, refined and exclusive design: the front in tempered glass, which you can choose in both the black and white versions, the integrated digital display with soft touch control and the absolute small size sleepvit for this type of product. By choosing endTherm 6000i S you will be able to enrich your home with an unprecedented element of design furniture, also suitable for the most modern and elegant rooms. Intuitive use The digital display of Therm 6000i S immediately shows the hi-tech aspect of the water heater and is simple and intuitive to use. Through the display it is possible to manage the desired water temperature by clicking on the raise/lower arrows visible next to the current temperature value. Check via app The Therm 6000i S water heater can also be controlled via its Bosch Water app using smart devices (smartphones and tablets) connected via Bluetooth,¸. The app makes additional functions available, in addition to setting the water temperature, such as: logs of the last five consumptions to find out your water and gas costs, diagnostics in case of malfunctions and direct contact with our Heating Technical Assistance Service. Comfort and savings in respect of the environment Gradual temperature regulation allows you to save up to 60 liters of water and up to 35% of gas. These savings are favored by the Smart Hydraulics valve, which allows the selected temperature to be reached more quickly and increases its stability: no more showers with sudden changes in temperature between hot and cold! Gas combustion to produce hot water is optimized thanks to a patented algorithm, OptiFlow, which automatically calculates the combustion air flow based on the power absorbed by the fan and its rotation speed. This guarantees optimum efficiency of the appliance in all operating conditions, the reduction of the minimum power and the avoidance of the risk of condensation forming on the heat exchanger. Summary of technical characteristics Electronic ignition gas water heater available for butane/propane natural gas and in 12 and 15 litres/min versions Controlle temperature regulation grad by grad Efficiency optimized for savings of up to 1.5 liters of water each time the tap is opened final 35% of gas Motorized water valve and hydraulic bypass for the best possible temperature stability and maximum comfort Compatible with solar thermal systems Dimensions and weight (623 x 300 x 195 mm - 13 kg) The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, in order to be placed on the market, heating systems for the production of hot water must comply with the ErP (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of appliances, favoring comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating the production of domestic hot water. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding underperforming technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent a concrete help for the consumer, allowing him to better understand the characteristics of the system, acquire greater awareness of energy saving, allowing him to choose better what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the first is supplied by the manufacturer together with the product for heating/domestic hot water production appliances the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing for an increase in the score attributed to each appliance and increasing the energy class of the system: therefore, it is the task of those who make/install the system to provide the consumer with the correct explanatory label. The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on consumption in the home, approximately 80% of which is due to heating and the production of hot water, and are now tax-incentivized. Junkers Bosch is already in line with the dictates of the ErP legislation, demonstrating the orientamental futur that has always distinguished the brand. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

THIS ITEM WILL BE REPLACED WITH NEXT EVO X 16 LT. COD. 3632433 Technical features Product code: 3632165 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: XL profile Characteristics of heating/DHW operation: Category II 2H3P Nominal thermal power kW 28 Minimum thermal power kW 5.4 Modulation range 6 - 31.0 Nominal heat input kW 31 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow l/min > 2.0 Flow rate (ΔT 25°C) l/min 16.0 Flow rate with temperature difference (Δt) 25 °C l/min 8.5 Supply voltage (Freq. 50 HZ) V 230 Maximum absorbed power W 49 Protection type IPX4D Power supply: METHANE General characteristics Next Evo EU The sealed chamber instantaneous water heater Ariston launches Next Evo , the new instantaneous gas water heater for the production of domestic hot water. Characterized by an exclusive design, reduced dimensions and new functions, Next Evo is even more efficient and easy to use. The innovative electronic control of Next Evo allows you to adjust, via an intuitive LCD display, the ideal temperature for the user and to keep it constant even when the required water flow varies, thanks to the two NTC probes which measure the temperature of the both incoming and outgoing water. The central position of the smoke outlet and the extremely reduced depth (only 17.5 cm) make it extremely flexible and easy to install. Maximum energy saving is ensured by the possible integration of Next Evo with natural and forced circulation thermal solar systems: the solar kit with thermostatic valve has been designed precisely to facilitate its implementation. A new, innovative way of conceiving solar integration: versatile, practical and easy to install Characteristics: Ultra compact: only 17.5 cm deep Thermostatic: modulating temperature control via NTC probes allowing high standards in terms of energy saving and comfort Flame ionisation electronic ignition with gas savings of up to 25% compared to older generations Operation with water pressure 0.1 bar Operation even with minimum water flow rates > 2 l/min Can be integrated with solar thermal systems Presence of the smoke pressure switch Presence of the water flow switch IPX4D electrical protection Ecodesign Directive After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling? Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹. How to read energy labels There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview GAS WATER HEATER RINNAI CONTINUUM 11i INTERNAL METHANE. 2 - FORCED DRAFT Sealed Chamber Water Heaters, COMPLETE WITH FUME EXHAUST KIT - ErP Energy class A Technical specifications Energy label specifications according to the European ErP directive Sanitary Energy Efficiency ACS: Class A Declared loader profile: M Characteristics of heating/DHW operation: Code: REU-1110FFU-NG Gas instantaneous water heater 2 - Forced flow sealed chamber water heaters Ignition: Electronic flame ionization, direct Installation: Indoor / outdoor protected Dimensions: mm 675 hx 370 wx 138 d; 16 Kgs Selectable temperatures on the control panel: C 35,37-48,50,55,60 Thermal inputs (min/max): 6.1 / 21.6 kW Hydraulic flow rate (min/max): 2.4 / 11 l/min Nominal water pressure (Pw): bar 0.7 - 10.0 (recommended 2.0 min) Electric consumption: Watts 50 normal / 8 stand-by Noise level: db(A) 46 Protection factor: IPx4 METHANE version Main features RINNAI GAS WATER HEATER: CONTINUUM Continuum the basic line of Rinnai. The code REU-1110FFU Continuum is the indoor water heater for domestic use which combines the smallest dimensions with high-performance technology for the instantaneous production of domestic hot water. Pleasant in design and designed to guarantee absolute safety, thanks to the 2 - Sealed Chamber Water Heaters, Continuum, ideal for the production of DHW in private homes. Equipped with display (not removable) for temperature management and self-diagnosis. Anti-corrosion enamelled stainless steel casing. Unlimited hot water without sudden changes in temperature Electronic ignition without pilot flame Temperature control to the degree Free testing, carried out by an authorized Rinnai technical assistance centre Shape memory alloy: the membrane inside the water group changes shape according to the temperature, determining the water flow in transit and the outlet temperature Characteristics: DESIGN Continuum comes with an essential and elegant design. It is super-slim, and thanks to its only 14cm thickness it can be installed even in the tightest spaces. The elongated front panel, ideal for hiding the hydraulic fittings and allowing for visible installation, is combined with a backlit digital control panel, which guarantees functionality and ease of use SAVING Thanks to the electronic ignition, which eliminates the pilot flame, and to the possibility of setting the desired temperature electronically, it is possible to obtain up to 25% savings on gas consumption. Fan and internal gas valve are in continuous modulation: determining how much fuel (air) and how much fuel (gas) must be used to obtain optimal combustion, which is the necessary condition to avoid waste and reduce polluting emissions. SAFETY Rinnai always pays great attention to safety: Continuum an appliance 2 - Sealed chamber water heaters. This means that it has no interchange with the environment in which it is installed. It draws air from the outside and expels the burnt fumes through a fan always in an outside environment (and thus avoids the risk of carbon monoxide poisoning). The electronic temperature control ensures that the appliance switches off if the outlet water temperature exceeds the one selected on the control panel by even just 3 degrees: this protects weak users from the risk of burns. The pre and post ventilation procedure, which cleans the combustion chamber and cools it at each ignition and shutdown cycle, preserves the life of the appliance and optimizes the combustion values. DESIGN AND FUNCTIONALITY Rinnai Continuum is distinguished by a clean and minimal line. The command on the machine, simple and intuitive, allows you to consult the water heater stat displayed on the practical digital display. The temperature is regulated by means of increase and decrease buttons, thus overcoming the approximation of the knobs, typical of a now obsolete technology. It is possible to select up to 16 different temperatures, starting from 35C, up to 60C. COMPACT AND SILENT Rinnai Continuum can be installed not only in the boiler room, but also in the living spaces of the house, such as bathrooms and kitchens, thanks to its compact size and low noise level (lower than the sound level of a normal conversation). ROBUST AND RELIABLE Rinnai Continuum is built with excellent quality materials and components, which make it a reliable and durable product. The external panels in enamelled-corrosion steel, the copper exchanger (for better heat conduction and greater hygiene), the probes are immersion (to know the temperature of the water supplied with precision to the degree). SHAPE MEMORY ALLOY the technology literally changes shape, the membrane inside the water unit changes shape according to the temperature, determining the flow of water in transit by controlling the outlet temperature. In this way it is possible to guarantee superior sanitary comfort and stability in the supply of hot water. TECHNIQUE AND RELIABILITY Rinnai Continuum equipped with fan and modulating gas valve to guarantee the correct air/gas inside the combustion chamber and therefore greater efficiency and lower polluting emissions. Rinnai Continuum is extremely versatile and, starting from 0.7 bar, it can also be installed where there are low hydraulic pressures. Thanks to the fan's electronic control, the appliance is able to detect the presence of obstructions and impediments to the correct expulsion of the combustion products and signal it, guaranteeing the safety of the rooms in which it is installed. INSTALLATION Rinnai Continuum is available both for use with natural gas and LPG (liquid gas) and can be installed both indoors and outdoors, albeit partially protected in temperate climates.* Continuum can be easily installed thanks to the special brackets with central fork. A single screw in the wall allows you to hang the fixture easily and proceed at a later time to set up the final fixing brackets, without having to simultaneously support the weight of the fixture itself. The coaxial flue is 60/100 cm and can reach a maximum length of 2.2 linear metres. ErP Ready Rinnai's commitment to a sustainable future. For this reason, all our products are "ERP Ready" or in line with the European classification legislation in force since 26 September 2015. ErP, acronym of Energy related Products (products connected to the use of energy), identifies Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-design. The Directive establishes very precise reference points for the manufacture of environmentally friendly products and defines the mandatory minimum requirements of energy and environmental performance for energy-consuming instruments. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central focuses: -increase the energy efficiency of energy-consuming machines by 20% - reduce carbon dioxide (CO2) emissions into the atmosphere by 20% -reach a percentage of renewable energy on final consumption of 20% From 26 September 2015, appliances for winter air conditioning and the production of domestic hot water are accompanied by an energy label. ELD directive: all clear on the label The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The ELD Labeling Directive (2010/30/EC) in fact provides that each item subject to the ErP Directive is equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power. Rinnai actively participates in these adjustments, happy to give its contribution to an eco-sustainable world Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

ATTENTION The boiler will be supplied with methane with the nozzle kit included for the LPG transformation. Contact the local authorized assistance center in advance for the conversion to LPG. NB THE PRODUCT IS MADE TO ORDER Technical features Model : S/SGA BF X VT 100 Code : 3211161 Power supply: methane Energy class: B Pickup profile: M Technical data Capacity: 100L Thermal power: 4 kW Useful power: 3.68 kW Heating time (ΔT= 45°C): 54 min. Continuous water at 40°C: 70 l/h Water in the first hour at 40°C: 251 l Natural gas consumption G20: 0.42 m3/h Max working pressure: 8 bar Dimensions and weight Net weight: 52kg Legend A: 1125mm B: 640mm D: 395mm D: 847mm Ariston S/SGA BF X VT water heater Low NOx: Complies with 09/26/2018 Operation without electrical connections Piezo ignition system Enamelled water heater Magnesium anode Operation even at minimum water pressures Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview GAS WATER HEATER FERROLI SKY 11F LPG, 2 - Forced draft sealed chamber water heaters, COMPLETE WITH FUME EXHAUST KIT. Technical specifications nominal heat input: 21.7 kW useful power: 19.2 kW hot water production: 11 l/min dimensions: 59.5 x 29.5 x 19.5 cm LPG version Main features SKY Strengths: Compact geometry heat exchanger made entirely of copper, consisting of a battery of five tubes connected in series, externally finned, external surface with anti-corrosion coating obtained with wet, toxic alumina lacquer ECS (Evolved Combustion System): Electronic control of combustion to guarantee optimal operation as the thermal load varies in the characteristics of the flue Prepared to work in conjunction with solar panel systems Place of installation: also for outdoors partially protected up to -5C as standard, up to -15C with the aid of the optional antifreeze heater kit Modulating thermal flow Advantages of SKY: High yields obtained thanks to high technology combined with maximum constructive rationality Compact size and lightweight Arrangement of the internal organs in such a way that everything is easily accessible from the front, so as to ensure the widest possible intervention agility by the Assistance Center Wide range of water temperature regulation Also certified for propane air operation (50% air - 50% G31 by means of a specific transformation to be requested from the authorized assistance center (max total price of 30 eur + VAT). Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

nb: discontinued product. the new therm 5600 model is shipped Technical characteristics Product data for energy consumption - according to requirements of EU regulations no. 811/2013 and 812/2013 to complete the directive 2010/30/EU CNG code: T4600 S 12-D 23 LPG code: T4600 S 12-D 31 Water heating energy efficiency class A Declared load profile M Forced draft sealed chamber Nominal heat output (Pn) [kW] 20.8 Nominal heat input (Qn) [kW] 22.5 Power setting/modulation range (Pn,min. - Pn,max.) [kW] 2.9-20.8 Max water flow with ΔT 25 °C [l/min] 12 Max water flow with ΔT 35 °C [l/min] 9 Efficiency at 100% rated power (on PCI) [%] 92 sound pressure max. [dB(A)] 67 Power supply [V(AC)] 230 Maximum absorbed power [W] 100 Degree of electrical protection [IP] IPX4D Weight (without packaging) [kg] 10 Dimensions (H x W x D) [mm] 568 x 300 x 170 Junkers Bosch water heaters With Junkers Bosch gas and heat pump water heaters you are assured of the best technology for the production of domestic hot water, always available and perfectly tailored to the user's needs: high quality, maximum efficiency and safety, ease of installation and control savings on bills. What to ask for more? Whatever your choice, choose quality. The wide range of Junkers Bosch gas and heat pump water heaters is able to meet the needs of your customers, to whom you can offer the most suitable solution for their home. Junkers Bosch gas water heaters are available in numerous models, to meet the most diverse needs: from the smallest ones, also suitable for being inserted in kitchen wall units, to those specifically designed for outdoor installation or for large buildings. Today it is possible to satisfy domestic hot water needs also through renewable energy sources: this allows not only economic savings, but also a contribution to environmental protection. Junkers Bosch heat pump water heaters are able to supply all the hot water needed in an efficient, convenient and sustainable way, obtaining energy from the external environment and using it to heat the water. Whatever your customers' requests, with Junkers Bosch you are sure to guarantee the best response. Environmentally friendly efficiency Choosing a gas water heater can also take advantage of renewable energy sources: all gas water heater models can be fully integrated, thanks to the Solar Kit accessory, in new or existing thermal solar systems, for exploit the inexhaustible energy of the sun for the production of domestic hot water. General characteristics THERM 4600 S Therm 4600 S is the extremely compact instantaneous gas water heater and thanks to its high efficiency it guarantees reduced consumption Advantages ▶ Comes with an easy and intuitive backlit LCD display ▶ It can be connected directly to solar thermal systems for the production of domestic hot water ▶ Guarantees reduced gas consumption thanks to the electronic temperature control ▶ Thanks to the OptiFlow patent, it automatically recognizes the lengths of the flue gas intake and exhaust system Characteristics ▶ Flame ionisation electronic ignition ▶ High efficiency and wide modulation range (1:7) ▶ Works even in case of very low water pressures ▶ Extremely compact dimensions ▶ Indoor installations The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, in order to be placed on the market, heating and hot water production systems will have to comply with the ErP (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of the appliances, favoring their comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating and domestic hot water production. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding less performing technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent concrete help for the consumer, allowing him to learn more about the characteristics of the system, acquire greater awareness of the energy savings allowed and make the best choice of what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the former is supplied by the manufacturer together with the product for heating and/or domestic hot water production appliances the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing the score attributed to each appliance to increase and increasing the energy class of the system: it is therefore the task of whoever makes/installs the system to supply the consumer the correct explanatory label. The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on home consumption, approximately 80% of which is due to heating and the production of hot water, and are already being incentivized at a tax level today. Junkers Bosch is already in line with the dictates of the ErP legislation, demonstrating the future orientation that has always distinguished the brand. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview GAS WATER HEATER RINNAI INFINITY 32I INTERNAL METHANE Cod. REU-VRM3237FFU-NG, 2 - Sealed chamber water heaters WITH FORCED DRAFT, COMPLETE WITH FUME EXHAUST KIT - ErP Energy class A. Technical specifications Energy label specifications according to the European ErP directive Sanitary Energy Efficiency ACS: Class A Declared upload profile: XL Electricity consumption (kWh/year) and fuel (GJ/year) 10 - 18 Noise levels indoors (dB) 63 Characteristics of heating/DHW operation: Code: REU-VRM3237FFU-NG 2 - Forced flow sealed chamber water heaters Electronic ignition without pilot flame Can be combined with: solar panels/recirculation/accumulmax lt 1000 Fine series antifreeze -20C Installation: Internal - Villa - Apartment with multifunctional shower/whirlpool and professional installations Dimensions: 600x470x220 (150 mm flue center distance); 25kg Methane heat input Min/Max (kW) 5/62 Water flow rate t 25C Min/Max (l/min) 2,4/32 (37 l/min with T=20C) Max operating temperature (C) 85 Minimum activation pressure (bar) 0.1 Nominal operating pressure Min/Max (bar) 2/10 Electric consumption normal / stand-by / antigel (W) 99 / 2 / 100 METHANE version Main features RINNAI GAS WATER HEATER: INFINITY saves infinite comforts Rinnai Infinity is the line of instantaneous GAS* water heaters, with forced flow or otherwise, for professional domestic use, indoors and outdoors, capable of guaranteeing: Unlimited hot water without sudden changes in temperature Gradual temperature selection via the standard remote control energy saving Simplicity of design and installation Compact size Superior performance and absolute security Furthermore, the external range, thanks to its unique characteristics, ensures total protection from: Wind (up to 90 km/h) Water coming from any direction (even horizontally, with IPX5D protection factor) Corrosion and rust, with the enamelled steel-zinc cape Frost, thanks to the standard antifreeze on all appliances (including indoors) The SERIES remote control allows the user to select the desired water temperature with precision to the degree, directly from the point of use (when the tap is opened). RESULT: no need to mix for maximum COMFORT and absolute PROTECTION from the risk of burns. energy savings: Rinnai Infinity eliminates any useless waste and ensures real savings: The gas operation guarantees considerably lower costs than the electric one. Respecting a traditional boiler, subject to heat loss and energy consumption to constantly heat the water, Infinity produces it instantly at the moment of the real request and exactly at the desired temperature. The advanced technology of the continuously modulating gas valve, which regulates combustion with the utmost precision, guarantees a more efficient and cleaner regime, with a consequent reduction in consumption and polluting emissions. The detection of the inlet water temperature also allows Infinity to work in perfect synergy with solar systems, heating cookers, other heat generators, modulating, solquandserve and solquantserve, to reach the set temperature Professional Range: Hot water in large quantities is no longer a problem The professional range includes two different flow rates, 26 and 32 l/min, available both in the version for internal and external installation. The extreme versatility of Infinity makes it adaptable to any type of installation; with a few simple evaluations it will be possible to choose whether to mount the single elements, of different capacities, to create cascade systems (up to 5 devices controlled by an electronic card) capable of delivering up to 160 l/min, without the need to have even a 5 - Storage water heaters. Thanks to the detection of the water inlet temperature, Infinity can also be effectively installed in systems with recirculation in combination with solar panels, guaranteeing maximum integration without waste. Infinity is also able to meet those users who need a very high thermal power: in this case, the equipment could be used as a thermal generator on an accumulator, exploiting the large thermal power associated with its small size. INFINITY 32e Infinity 32 external is an instantaneous domestic hot water producer for external installation with electronic temperature management and water flow control. Anti-corrosion enamelled stainless steel casing and electronic controls as standard with temperature management and self-diagnosis function. Max operating temperature equal to 85 C Antifreeze Standard antifreeze system (also on indoor appliances) up to -20C. Status monitor Control panel The Infinity 32s feature a front panel statpost monitor, which displays operating temperature and fault codes. Up to 4 remote controls can be connected to the appliance (of which add to the dashboard for the internal model) offering the following options: temperature control directly from the room of use self-diagnosis additional functions with "de luxe" controls for kitchen bathrooms Cascade connections In addition to the previous management and control systems for cascade appliances, the new Infinity 32 is equipped with a connector for connection to a Building Management System (REU-OPU) which allows error signals to be remoted. ERP extension Rinnai's commitment to a sustainable future. For this reason, all our products are "ERP Ready" or in line with the European classification legislation in force since 26 September 2015. ErP, acronym of Energy related Products (products connected to the use of energy), identifies Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-design. The Directive establishes very precise reference points for the manufacture of environmentally friendly products and defines the mandatory minimum requirements of energy and environmental performance for energy-consuming instruments. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central focuses: -increase the energy efficiency of energy-consuming machines by 20% - reduce carbon dioxide (CO2) emissions into the atmosphere by 20% -reach a percentage of renewable energy on final consumption of 20% From 26 September 2015, appliances for winter air conditioning and the production of domestic hot water are accompanied by an energy label. ELD directive: all clear on the label The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The ELD Labeling Directive (2010/30/EC) in fact provides that each item subject to the ErP Directive is equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power. Rinnai actively participates in these adjustments, happy to give its contribution to an eco-sustainable world Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less