Sealed chamber water heaters: safety and optimal performance for your bathroom. Compact design, energy efficiency and gas leak protection. Choose from our selection of sealed chamber water heaters to ensure reliable and safe hot water!
Sealed chamber water heaters
RINNAI Rinnai Gas Water Heater Model Infinity 14i Code Reu-A1420ffu-Lpg LPG Complete With Smoke Exhaust Kit
Technical features Code : REU-A1420FFU-LPG Type of Installation : Internal Device typology : C Energy class: A Load profile : L Performance Thermal Capacity (kW) min 4.1 / Max 27.2 Hydraulic flow rate (l/min) min 2 l/min MAX 14 l/min (20 l/min ∆T=15°C) Max temperature that can be set (°C) 65 Minimum activation pressure (bar) 0.1 Nominal operating pressure (bar) min 1 Max 8.30 Max number of additional controls that can be installed 3 Electricity consumption (W) Normal 55 W Stand-by 1.5 W Antifreeze 116 W Predisposition for connection with recirculation yes Arrangement for integration with solar yes Fittings and flue Ø 60/100 coax flue, max discharge distance 5m+3 bends, divisible Ø 80/80. Male outlet. See the 'accessories' section Water Inlet: ½” Water Outlet: ½” Gas ½” Standard antifreeze, down to -15°C LPG supply Dimensions Dimensions ( LxWxH ) : 373 x 173 x 541 mm Weight : 14.5Kg INFINITY The 17 litres/min Infinity 17i water heater is a domestic instantaneous water heater to be installed inside the home. It produces hot water only in response to a real request (only when the tap is opened). Unlike a kettle, it does not need to store large quantities of water at high temperatures. This allows for great savings in terms of energy costs and water consumption . No need to mix the water, which immediately comes out at the desired temperature. NEW The installer can select the "high altitude" setting to ensure maximum performance of the water heater even when installed in the high mountains, in rarefied air conditions NEW When the water heater and the utilities are distant and heat dispersions are generated, the installer can correct the temperature according to the degree of use (from +1°C to +3°C) by perfecting the temperature at the tap NEW A progressive alert signals any limescale deposits. This allows cleaning to be carried out before the level is such as to cause a malfunction. Instantaneous gas-fired domestic hot water producer for indoor installation. Equipped with a control panel on the dashboard for managing the temperature, the degree and self-diagnosis. Anti-corrosion enamelled galvanized steel casing. Like all Rinnai water heaters, the new Infinity control the temperature to the degree and optimize comfort in the name of energy savings Temperature refinement to degree at point of use When the water heater is far from the utilities and the pipes generate heat dispersion, it is possible to correct the temperature at the tap from +1°C to +3°C Are you a home user? Register your new water heater on rinnai.it in the appropriate section to extend the warranty of your water heater to 4 years free of charge* The warranty extension (valid only on spare parts) can be requested on domestic water heaters. Consult the technical manuals to find out the details of the initiative. AT OUR HOME WE ARE FREE TO BE OURSELVES Rinnai responds to the different needs of hot water. A product available in different sizes 14 or 17 litres/minute. A studio flat, an apartment, one or more people living together. Always, an appliance that takes up very little space and offers endless hot water, giving way to what matters most Characteristics Unlimited hot water without sudden changes in temperature Electronic ignition without pilot flame Temperature control to the degree via the series controller Flow regulator: constant temperature as the flow varies Integrated automatic reset as standard Progressive LC code that detects any limescale deposits Free warranty extension on rinnai.it Functions Can be combined with solar panels Can be combined with recirculation Can be combined with max storage tank lt 500 Max 3 additional remote controls High Altitude Function Ultrathin Standard antifreeze up to -15°C Perfect temperature despite dispersions** Eco friendly Product Guarantee: All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.
€775,00 - €790,00
-
Junkers Bosch Junkers Hydrocompact Indoor 18 Lt Gas Water Heater Model Wtd 18 Am And LPG Complete With Smoke Kit
Overview GAS WATER HEATER JUNKERS HYDROCOMPACT INDOOR WTD 18 AM E (18 LT) LPG 2 - Forced draft sealed chamber water heaters COMPLETE WITH FUME EXHAUST KIT: Junkers Hydrocompact Indoor is the smallest instantaneous gas water heater available on the market. IN THE ABSENCE OF THE PRODUCT, THE NEW LPG THERM 4600 S 18 MODEL WILL BE SUPPLIED Technical specifications DHW energy efficiency class (ErP): A Catalog code: WTD 18 AM E Declared upload profile: XL Gas instantaneous water heater 2 - Forced draft sealed chamber water heaters Flame ionisation electronic ignition Nominal heat output: 31.6 kW Nominal heat input: 34 kW Efficiency at 100% of rated power: 92% Efficiency at 30% of rated power: 94% Water flow delivered with DT 25 C: 18 l/min Minimum operating flow: 2.2 l/min Maximum working pressure: 12 bar Minimum operating temperature with antifreeze kit: -25 C (accessory) Remote control: accessory Display: LCD multifunction degree of protection: IPX4D Dimensions (LxWxH): mm 175x364x568 Version: LPG Features list Hydrocompact Indoor: Compact gas instantaneous water heaters for indoor use You have little space available but you don't want to give up on quality and comfort as always It's natHYDROCOMPACTINDOOR, the new compact water heater in the Junkers range: all the usual comfort in very little space! The most compact ever HYDROCOMPACT INDOOR is the smallest indoor water heater available on the market. All Junkers quality and high technology are enclosed in just 17 cm depth (12 and 15 l/min models)! Easily placed inside a wall unit in your kitchen (in compliance with current regulations), the new HYDROCOMPACT INDOOR represents the best solution for those with space problems: thanks to its extremely compact dimensions, in fact, it is able to satisfy any need for space and installation. The simplicity of great technology Thanks to the new patented Junkers Optiflow technology, HYDROCOMPACTINDOOR is able to automatically recognize the lengths of the suction and flue gas system. This intelligent system helps to increase the efficiency of the product, improving its performance and reducing consumption. The large display integrated in the appliance also allows you to manage and program the operation with extreme simplicity, and to set the water temperature just as easily, according to the different comfort requirements. Furthermore, for the most demanding customers, it is possible to view all the information present on the integrated display as well as on the remote control (accessory). Thanks to the new patented OptiFlow technology, HYDROCOMPACTINDOOR is able to automatically calculate the combustion air flow, based on the power absorbed by the fan and the rotation speed of the fan itself. This guarantees: an optimal performance of the appliance in all operating conditions the reduction of the minimum power without the risk of condensation forming on the heat exchanger greatly reduced levels of CO2 emissions Furthermore, the automatic adaptation of the fan speed to the installation conditions (length of the intake/exhaust ducts and any obstructions) ensures simpler and faster installation. Small consumption, great performance With HYDROCOMPACTINDOOR, consumption optimization is guaranteed! Thanks to the high efficiency and the wide modulation range (1:7) the water heater is able to adapt the consumption of gas required to heat the water to the real demand for sanitary water withdrawal, thereby guaranteeing all the sanitary comfort you desire and maximum savings. Furthermore, HYDROCOMPACTINDOOR can be directly connected to thermal solar systems for the production of domestic hot water: all the energy of the sun for maximum comfort and minimum consumption! Characteristics: Extremely compact dimensions: the smallest instantaneous gas water heater available on the market Automatic recognition of the lengths of the suction/flue gas system thanks to the patented OptiFlow technology Efficiency final 94% Directly connectable to thermal solar systems for the production of domestic hot water, by means of a special TWM 20 mixing valve Easy and intuitive management, thanks to the large LCD display for adjusting the temperature and viewing information relating to the operation of the appliance Possibility of satisfying all comfort needs thanks to the completeness of the range, made up of 12, 15 and 18 l/min appliances High sanitary comfort reduction of gas consumption thanks to the electronic temperature control (stability, ¤ 1C) Reduction of consumption thanks to the wide modulation intervals (1:7) Possibility of managing the water heater remotely thanks to the accessory control Elegant design The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, heating systems for the production of hot water, in order to be placed on the market, will have to comply with the ErP regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of appliances, favoring comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating the production of domestic hot water. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding less performing technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent a concrete help for the consumer, allowing him to better understand the characteristics of the system, acquire greater awareness of energy saving, allowing him to choose better what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the first is supplied by the manufacturer together with the product for heating/domestic hot water production appliances the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing for an increase in the score attributed to each appliance and increasing the energy class of the system: therefore, it is the task of those who make/install the system to provide the consumer with the correct explanatory label. The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on consumption in the home, approximately 80% of which is due to heating and the production of hot water, and are now tax-incentivized. Junkers Bosch is already in line with the dictates of the ErP legislation, demonstrating the orientamental futur that has always distinguished the brand. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.
€547,00
-
Sime Sime Mini 12 Bf Gas Water Heater Sealed Chamber Complete With Coaxial Fume Exhaust Kit Cod. 8112630 Methane
Gas water heater Sime Mini 12 BF sealed chamber complete with smoke exhaust kit cod. 8112630 Mini BF ErP 12 Nominal thermal power kW 21.0 Nominal heat input kW 24.0 Sanitary flow rate ∆t 25°C l/min 12 DHW energy efficiency class A ACS size M Maximum/minimum water pressure 7/0.2 bar Electric power absorbed W 33 IP degree of protection IPX4 Gas supply 1/2” Sanitary water inlet 1/2” Sanitary water outlet 1/2” CNG power supply Dimensions HxWxD 570x345x150 mm Sime Mini BF The Mini BF ErP water heater stands out for its modern line and its particularly small dimensions, especially in depth, which make it adaptable to any available space. It can be installed outdoors, in a partially protected place with a minimum design temperature of 0°C, it is equipped with automatic electronic ignition and flame modulation according to the water flow rate and can easily reach a correct and constant temperature, even with network pressure variations. Mini BF ErP can receive pre-heated water from a solar system with a temperature between 35° and 65°C. Depending on the selected setpoint and the inlet water temperature, the power is modulated to obtain maximum comfort, avoiding unnecessary switching on. CAN BE INSTALLED INDOOR OR OUTDOOR (In a partially protected place) INTERFACE WITH MULTIFUNCTION LED DISPLAY Prepared for solar thermal Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€378,00
-
Riello Riello Mini 17 Ln Low Nox Airtight Chamber Water Heater Complete With Methane Fume Exhaust Kit
Riello Mini 17 LN Low NOx sealed chamber water heater complete with methane fume exhaust kit Typology: Forced Draft Sealed Chamber; Model: Mini 17 LN; Sanitary energy efficiency class: A; Sanitary load profile: L; Power supply:METHANE (G20/21); Daily gas consumption: 15,175 kW/h; Sanitary Energy Efficiency: 80.2%; Annual gas consumption: 11 GJ; Emissions of nitrogen oxides (Nox): 33 mg/kWh; Hot water production Δt=30°: 13.3 litres/min; Nominal heat input: 30.0 kW; Nominal thermal power: 27.90 kW; Min/max withdrawal range: 2.5/13 litres/min; Min/max pressure: 0.2/10.0 bar; DHW temperature selection range: 36-65°C ; Supply voltage: 230/50V/Hz; Electrical protection degree: IPX4D; Dimensions: (H×W×D) 640×400×240 mm;Weight: 21 kg; Water/gas connections: 1/2” – 3/4″ Ø; RIELLO MINI From RIELLO technological research comes MINI LN, the new line of low-emission instantaneous water heaters with sealed chamber, completely renewed in design, both aesthetic and functional, able to offer maximum sanitary comfort in compliance with recent European regulations to reduce NOx emissions. The new aesthetic, elegant and linear, and the compact dimensions, allow the integration of this product in any living environment. This feature represents the ideal solution for responding to any domestic hot water production need. Prepared for installation inside the home, the new water heaters can also be installed outside, in a partially protected place, with the addition of the antifreeze kit (available as an accessory) up to a temperature of -10° c. Latest generation burner with reduced NOx emissions The new RIELLO MINI LN line is able to satisfy the most demanding requirements in terms of low emissions which will come into force from September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or less than 56 mg /kWh. The innovative hyperstoichiometric type burner allows the flame to be fed by a greater air-gas mixture than that required for combustion, resulting in a very low flame temperature. This characteristic, combined with the cooling of the burner through the water in the water heater circuit, results in a significant lowering of the polluting values of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by the legislation with flying colors international. The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. The technology and the advantages of the range Innovative hyperstoichiometric and cooled burner with low emissions Wide flame modulation which allows excellent stability of the domestic hot water delivery temperature, even with minimum withdrawals Electronic ignition and ionization flame control Wide flame modulation (1 : 3) which allows perfect stability of the domestic hot water delivery temperature, even with minimum withdrawals Brand new user interface with backlit display with icons and 4 keys, to easily navigate the menu and make adjustments Abundant domestic hot water production: 11, 13 or 17 litres/min Even more compact dimensions and simple installation Mounting template and power cable supplied. Instantaneous sealed chamber water heater with methane and LPG versions Many new functions in a linear and modern design new RIELLO Mini LN are characterized by the new electronics which, combined with the modern and linear design, results in a new control panel, simple and intuitive, with many additional and innovative functions. Through a large backlit digital display (40x60 mm) and 4 command keys, the user can manage all the functions of the water heater and navigate easily in the menu. The icon language of the display makes both the general setting of the appliance and the setting of the special functions particularly intuitive, as well as immediately displaying the diagnostics of any anomalies. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€560,00
-
RINNAI Rinnai Infinity 32i Gas Water Heater Internal Methane Complete With Smoke Exhaust Kit
Overview GAS WATER HEATER RINNAI INFINITY 32I INTERNAL METHANE Cod. REU-VRM3237FFU-NG, 2 - Sealed chamber water heaters WITH FORCED DRAFT, COMPLETE WITH FUME EXHAUST KIT - ErP Energy class A. Technical specifications Energy label specifications according to the European ErP directive Sanitary Energy Efficiency ACS: Class A Declared upload profile: XL Electricity consumption (kWh/year) and fuel (GJ/year) 10 - 18 Noise levels indoors (dB) 63 Characteristics of heating/DHW operation: Code: REU-VRM3237FFU-NG 2 - Forced flow sealed chamber water heaters Electronic ignition without pilot flame Can be combined with: solar panels/recirculation/accumulmax lt 1000 Fine series antifreeze -20C Installation: Internal - Villa - Apartment with multifunctional shower/whirlpool and professional installations Dimensions: 600x470x220 (150 mm flue center distance); 25kg Methane heat input Min/Max (kW) 5/62 Water flow rate t 25C Min/Max (l/min) 2,4/32 (37 l/min with T=20C) Max operating temperature (C) 85 Minimum activation pressure (bar) 0.1 Nominal operating pressure Min/Max (bar) 2/10 Electric consumption normal / stand-by / antigel (W) 99 / 2 / 100 METHANE version Main features RINNAI GAS WATER HEATER: INFINITY saves infinite comforts Rinnai Infinity is the line of instantaneous GAS* water heaters, with forced flow or otherwise, for professional domestic use, indoors and outdoors, capable of guaranteeing: Unlimited hot water without sudden changes in temperature Gradual temperature selection via the standard remote control energy saving Simplicity of design and installation Compact size Superior performance and absolute security Furthermore, the external range, thanks to its unique characteristics, ensures total protection from: Wind (up to 90 km/h) Water coming from any direction (even horizontally, with IPX5D protection factor) Corrosion and rust, with the enamelled steel-zinc cape Frost, thanks to the standard antifreeze on all appliances (including indoors) The SERIES remote control allows the user to select the desired water temperature with precision to the degree, directly from the point of use (when the tap is opened). RESULT: no need to mix for maximum COMFORT and absolute PROTECTION from the risk of burns. energy savings: Rinnai Infinity eliminates any useless waste and ensures real savings: The gas operation guarantees considerably lower costs than the electric one. Respecting a traditional boiler, subject to heat loss and energy consumption to constantly heat the water, Infinity produces it instantly at the moment of the real request and exactly at the desired temperature. The advanced technology of the continuously modulating gas valve, which regulates combustion with the utmost precision, guarantees a more efficient and cleaner regime, with a consequent reduction in consumption and polluting emissions. The detection of the inlet water temperature also allows Infinity to work in perfect synergy with solar systems, heating cookers, other heat generators, modulating, solquandserve and solquantserve, to reach the set temperature Professional Range: Hot water in large quantities is no longer a problem The professional range includes two different flow rates, 26 and 32 l/min, available both in the version for internal and external installation. The extreme versatility of Infinity makes it adaptable to any type of installation; with a few simple evaluations it will be possible to choose whether to mount the single elements, of different capacities, to create cascade systems (up to 5 devices controlled by an electronic card) capable of delivering up to 160 l/min, without the need to have even a 5 - Storage water heaters. Thanks to the detection of the water inlet temperature, Infinity can also be effectively installed in systems with recirculation in combination with solar panels, guaranteeing maximum integration without waste. Infinity is also able to meet those users who need a very high thermal power: in this case, the equipment could be used as a thermal generator on an accumulator, exploiting the large thermal power associated with its small size. INFINITY 32e Infinity 32 external is an instantaneous domestic hot water producer for external installation with electronic temperature management and water flow control. Anti-corrosion enamelled stainless steel casing and electronic controls as standard with temperature management and self-diagnosis function. Max operating temperature equal to 85 C Antifreeze Standard antifreeze system (also on indoor appliances) up to -20C. Status monitor Control panel The Infinity 32s feature a front panel statpost monitor, which displays operating temperature and fault codes. Up to 4 remote controls can be connected to the appliance (of which add to the dashboard for the internal model) offering the following options: temperature control directly from the room of use self-diagnosis additional functions with "de luxe" controls for kitchen bathrooms Cascade connections In addition to the previous management and control systems for cascade appliances, the new Infinity 32 is equipped with a connector for connection to a Building Management System (REU-OPU) which allows error signals to be remoted. ERP extension Rinnai's commitment to a sustainable future. For this reason, all our products are "ERP Ready" or in line with the European classification legislation in force since 26 September 2015. ErP, acronym of Energy related Products (products connected to the use of energy), identifies Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-design. The Directive establishes very precise reference points for the manufacture of environmentally friendly products and defines the mandatory minimum requirements of energy and environmental performance for energy-consuming instruments. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central focuses: -increase the energy efficiency of energy-consuming machines by 20% - reduce carbon dioxide (CO2) emissions into the atmosphere by 20% -reach a percentage of renewable energy on final consumption of 20% From 26 September 2015, appliances for winter air conditioning and the production of domestic hot water are accompanied by an energy label. ELD directive: all clear on the label The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The ELD Labeling Directive (2010/30/EC) in fact provides that each item subject to the ErP Directive is equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power. Rinnai actively participates in these adjustments, happy to give its contribution to an eco-sustainable world Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.
€2.102,00
-
Junkers Bosch Junkers Bosch Gas Water Heater Model Therm 4600 S 12 Liters Methane Complete With Smoke Kit
nb: discontinued product. the new therm 5600 model is shipped Technical characteristics Product data for energy consumption - according to requirements of EU regulations no. 811/2013 and 812/2013 to complete the directive 2010/30/EU CNG code: T4600 S 12-D 23 LPG code: T4600 S 12-D 31 Water heating energy efficiency class A Declared load profile M Forced draft sealed chamber Nominal heat output (Pn) [kW] 20.8 Nominal heat input (Qn) [kW] 22.5 Power setting/modulation range (Pn,min. - Pn,max.) [kW] 2.9-20.8 Max water flow with ΔT 25 °C [l/min] 12 Max water flow with ΔT 35 °C [l/min] 9 Efficiency at 100% rated power (on PCI) [%] 92 sound pressure max. [dB(A)] 67 Power supply [V(AC)] 230 Maximum absorbed power [W] 100 Degree of electrical protection [IP] IPX4D Weight (without packaging) [kg] 10 Dimensions (H x W x D) [mm] 568 x 300 x 170 Junkers Bosch water heaters With Junkers Bosch gas and heat pump water heaters you are assured of the best technology for the production of domestic hot water, always available and perfectly tailored to the user's needs: high quality, maximum efficiency and safety, ease of installation and control savings on bills. What to ask for more? Whatever your choice, choose quality. The wide range of Junkers Bosch gas and heat pump water heaters is able to meet the needs of your customers, to whom you can offer the most suitable solution for their home. Junkers Bosch gas water heaters are available in numerous models, to meet the most diverse needs: from the smallest ones, also suitable for being inserted in kitchen wall units, to those specifically designed for outdoor installation or for large buildings. Today it is possible to satisfy domestic hot water needs also through renewable energy sources: this allows not only economic savings, but also a contribution to environmental protection. Junkers Bosch heat pump water heaters are able to supply all the hot water needed in an efficient, convenient and sustainable way, obtaining energy from the external environment and using it to heat the water. Whatever your customers' requests, with Junkers Bosch you are sure to guarantee the best response. Environmentally friendly efficiency Choosing a gas water heater can also take advantage of renewable energy sources: all gas water heater models can be fully integrated, thanks to the Solar Kit accessory, in new or existing thermal solar systems, for exploit the inexhaustible energy of the sun for the production of domestic hot water. General characteristics THERM 4600 S Therm 4600 S is the extremely compact instantaneous gas water heater and thanks to its high efficiency it guarantees reduced consumption Advantages ▶ Comes with an easy and intuitive backlit LCD display ▶ It can be connected directly to solar thermal systems for the production of domestic hot water ▶ Guarantees reduced gas consumption thanks to the electronic temperature control ▶ Thanks to the OptiFlow patent, it automatically recognizes the lengths of the flue gas intake and exhaust system Characteristics ▶ Flame ionisation electronic ignition ▶ High efficiency and wide modulation range (1:7) ▶ Works even in case of very low water pressures ▶ Extremely compact dimensions ▶ Indoor installations The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, in order to be placed on the market, heating and hot water production systems will have to comply with the ErP (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of the appliances, favoring their comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating and domestic hot water production. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding less performing technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent concrete help for the consumer, allowing him to learn more about the characteristics of the system, acquire greater awareness of the energy savings allowed and make the best choice of what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the former is supplied by the manufacturer together with the product for heating and/or domestic hot water production appliances the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing the score attributed to each appliance to increase and increasing the energy class of the system: it is therefore the task of whoever makes/installs the system to supply the consumer the correct explanatory label. The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on home consumption, approximately 80% of which is due to heating and the production of hot water, and are already being incentivized at a tax level today. Junkers Bosch is already in line with the dictates of the ErP legislation, demonstrating the future orientation that has always distinguished the brand. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€496,00 - €509,00
-
Ferroli Ferroli Sky Eco 11f Low Nox Gas Water Heater Complete With Methane Fume Kit - New
Ferroli SKY ECO 11F Low NOx gas water heater complete with methane fume kit - NEW ERP Class (Class G - A) A XL load profile Nominal heat input Max kW 21.7 Thermal power Max / Min kW 19.5 / 5.5 Maximum working pressure 10 bar Maximum DHW production Δt 25°C / Δt 30°C l/min 11.2 / 9.3 Power supply V/Hz 230 / 50; 14 Kgs New Ferroli ECO range EFFECTIVE The ECO range has been designed according to the stringent efficiency parameters of the European ErP Directive. In practice, they are able to produce a lot of hot water at a low cost, respecting the environment and with minimal polluting emissions. They can also be integrated into a solar thermal system with extreme simplicity for maximum efficiency and comfort. EASY ECO water heaters are extremely simple to install and are interchangeable with previous series. Although very compact in size, they have been designed and built in such a way as to have easy access to the internal components for easy maintenance. BEAUTIFUL AND SMART The designers of the ECO project have created a «friendly» aesthetic that can be easily integrated with the most diverse furnishing styles. The knob or button controls have been designed to be easy to use and immediately understood. All Ferroli gas water heaters are equipped with a user interface display. Sky ECO F Sealed chamber gas water heater, with modulating thermal power and electronic control of the. Combustion. LOW NOx fume emission and SUN EASY system for direct coupling to a solar thermal system SUN EASY Easy... Cheap... Brilliant The SKY ECO range has been designed to be easily integrated with thermal solar systems, with natural or forced circulation. The temperature of the water coming from the solar circuit is constantly monitored and the water heater burner is turned on only if it is not hot enough. To reach the desired temperature, SUN EASY allows considerable savings even during the coldest seasons, exploiting and integrating even the smallest solar contribution, otherwise lost. The heart of water heaters All ECO series water heaters comply with the very strict restrictions on the emission of fumes into the atmosphere, imposed by European regulations. The burners in the ECO range use a particular technology which consists in keeping the flame temperature very low, keeping the gas trains wet. This expedient makes it possible to go well below the limits imposed by the ErP directive which sets the NOx limit at the threshold of 56 mg/kWh. Copper exchanger Interface displays Continuous power modulation Methane / LPG / Propane air Solar systems Also outdoor installation in protected places Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€372,00
-
Ferroli Ferroli Sky 11f LPG Gas Water Heater Complete With Fume Exhaust Kit
Overview GAS WATER HEATER FERROLI SKY 11F LPG, 2 - Forced draft sealed chamber water heaters, COMPLETE WITH FUME EXHAUST KIT. Technical specifications nominal heat input: 21.7 kW useful power: 19.2 kW hot water production: 11 l/min dimensions: 59.5 x 29.5 x 19.5 cm LPG version Main features SKY Strengths: Compact geometry heat exchanger made entirely of copper, consisting of a battery of five tubes connected in series, externally finned, external surface with anti-corrosion coating obtained with wet, toxic alumina lacquer ECS (Evolved Combustion System): Electronic control of combustion to guarantee optimal operation as the thermal load varies in the characteristics of the flue Prepared to work in conjunction with solar panel systems Place of installation: also for outdoors partially protected up to -5C as standard, up to -15C with the aid of the optional antifreeze heater kit Modulating thermal flow Advantages of SKY: High yields obtained thanks to high technology combined with maximum constructive rationality Compact size and lightweight Arrangement of the internal organs in such a way that everything is easily accessible from the front, so as to ensure the widest possible intervention agility by the Assistance Center Wide range of water temperature regulation Also certified for propane air operation (50% air - 50% G31 by means of a specific transformation to be requested from the authorized assistance center (max total price of 30 eur + VAT). Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.
€365,00
-
Ariston Ariston S/Sga Bf X Vt 100 Low Nox Methane Or LPG Sealed Chamber Water Heater Complete With Coaxial Smoke Exhaust Kit Code 3211161
ATTENTION The boiler will be supplied with methane with the nozzle kit included for the LPG transformation. Contact the local authorized assistance center in advance for the conversion to LPG. NB THE PRODUCT IS MADE TO ORDER Technical features Model : S/SGA BF X VT 100 Code : 3211161 Power supply: methane Energy class: B Pickup profile: M Technical data Capacity: 100L Thermal power: 4 kW Useful power: 3.68 kW Heating time (ΔT= 45°C): 54 min. Continuous water at 40°C: 70 l/h Water in the first hour at 40°C: 251 l Natural gas consumption G20: 0.42 m3/h Max working pressure: 8 bar Dimensions and weight Net weight: 52kg Legend A: 1125mm B: 640mm D: 395mm D: 847mm Ariston S/SGA BF X VT water heater Low NOx: Complies with 09/26/2018 Operation without electrical connections Piezo ignition system Enamelled water heater Magnesium anode Operation even at minimum water pressures Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€932,00
-
RINNAI Rinnai Gas Water Heater Model Continuum 11i Methane Complete With Smoke Exhaust Kit
Overview GAS WATER HEATER RINNAI CONTINUUM 11i INTERNAL METHANE. 2 - FORCED DRAFT Sealed Chamber Water Heaters, COMPLETE WITH FUME EXHAUST KIT - ErP Energy class A Technical specifications Energy label specifications according to the European ErP directive Sanitary Energy Efficiency ACS: Class A Declared loader profile: M Characteristics of heating/DHW operation: Code: REU-1110FFU-NG Gas instantaneous water heater 2 - Forced flow sealed chamber water heaters Ignition: Electronic flame ionization, direct Installation: Indoor / outdoor protected Dimensions: mm 675 hx 370 wx 138 d; 16 Kgs Selectable temperatures on the control panel: C 35,37-48,50,55,60 Thermal inputs (min/max): 6.1 / 21.6 kW Hydraulic flow rate (min/max): 2.4 / 11 l/min Nominal water pressure (Pw): bar 0.7 - 10.0 (recommended 2.0 min) Electric consumption: Watts 50 normal / 8 stand-by Noise level: db(A) 46 Protection factor: IPx4 METHANE version Main features RINNAI GAS WATER HEATER: CONTINUUM Continuum the basic line of Rinnai. The code REU-1110FFU Continuum is the indoor water heater for domestic use which combines the smallest dimensions with high-performance technology for the instantaneous production of domestic hot water. Pleasant in design and designed to guarantee absolute safety, thanks to the 2 - Sealed Chamber Water Heaters, Continuum, ideal for the production of DHW in private homes. Equipped with display (not removable) for temperature management and self-diagnosis. Anti-corrosion enamelled stainless steel casing. Unlimited hot water without sudden changes in temperature Electronic ignition without pilot flame Temperature control to the degree Free testing, carried out by an authorized Rinnai technical assistance centre Shape memory alloy: the membrane inside the water group changes shape according to the temperature, determining the water flow in transit and the outlet temperature Characteristics: DESIGN Continuum comes with an essential and elegant design. It is super-slim, and thanks to its only 14cm thickness it can be installed even in the tightest spaces. The elongated front panel, ideal for hiding the hydraulic fittings and allowing for visible installation, is combined with a backlit digital control panel, which guarantees functionality and ease of use SAVING Thanks to the electronic ignition, which eliminates the pilot flame, and to the possibility of setting the desired temperature electronically, it is possible to obtain up to 25% savings on gas consumption. Fan and internal gas valve are in continuous modulation: determining how much fuel (air) and how much fuel (gas) must be used to obtain optimal combustion, which is the necessary condition to avoid waste and reduce polluting emissions. SAFETY Rinnai always pays great attention to safety: Continuum an appliance 2 - Sealed chamber water heaters. This means that it has no interchange with the environment in which it is installed. It draws air from the outside and expels the burnt fumes through a fan always in an outside environment (and thus avoids the risk of carbon monoxide poisoning). The electronic temperature control ensures that the appliance switches off if the outlet water temperature exceeds the one selected on the control panel by even just 3 degrees: this protects weak users from the risk of burns. The pre and post ventilation procedure, which cleans the combustion chamber and cools it at each ignition and shutdown cycle, preserves the life of the appliance and optimizes the combustion values. DESIGN AND FUNCTIONALITY Rinnai Continuum is distinguished by a clean and minimal line. The command on the machine, simple and intuitive, allows you to consult the water heater stat displayed on the practical digital display. The temperature is regulated by means of increase and decrease buttons, thus overcoming the approximation of the knobs, typical of a now obsolete technology. It is possible to select up to 16 different temperatures, starting from 35C, up to 60C. COMPACT AND SILENT Rinnai Continuum can be installed not only in the boiler room, but also in the living spaces of the house, such as bathrooms and kitchens, thanks to its compact size and low noise level (lower than the sound level of a normal conversation). ROBUST AND RELIABLE Rinnai Continuum is built with excellent quality materials and components, which make it a reliable and durable product. The external panels in enamelled-corrosion steel, the copper exchanger (for better heat conduction and greater hygiene), the probes are immersion (to know the temperature of the water supplied with precision to the degree). SHAPE MEMORY ALLOY the technology literally changes shape, the membrane inside the water unit changes shape according to the temperature, determining the flow of water in transit by controlling the outlet temperature. In this way it is possible to guarantee superior sanitary comfort and stability in the supply of hot water. TECHNIQUE AND RELIABILITY Rinnai Continuum equipped with fan and modulating gas valve to guarantee the correct air/gas inside the combustion chamber and therefore greater efficiency and lower polluting emissions. Rinnai Continuum is extremely versatile and, starting from 0.7 bar, it can also be installed where there are low hydraulic pressures. Thanks to the fan's electronic control, the appliance is able to detect the presence of obstructions and impediments to the correct expulsion of the combustion products and signal it, guaranteeing the safety of the rooms in which it is installed. INSTALLATION Rinnai Continuum is available both for use with natural gas and LPG (liquid gas) and can be installed both indoors and outdoors, albeit partially protected in temperate climates.* Continuum can be easily installed thanks to the special brackets with central fork. A single screw in the wall allows you to hang the fixture easily and proceed at a later time to set up the final fixing brackets, without having to simultaneously support the weight of the fixture itself. The coaxial flue is 60/100 cm and can reach a maximum length of 2.2 linear metres. ErP Ready Rinnai's commitment to a sustainable future. For this reason, all our products are "ERP Ready" or in line with the European classification legislation in force since 26 September 2015. ErP, acronym of Energy related Products (products connected to the use of energy), identifies Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-design. The Directive establishes very precise reference points for the manufacture of environmentally friendly products and defines the mandatory minimum requirements of energy and environmental performance for energy-consuming instruments. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central focuses: -increase the energy efficiency of energy-consuming machines by 20% - reduce carbon dioxide (CO2) emissions into the atmosphere by 20% -reach a percentage of renewable energy on final consumption of 20% From 26 September 2015, appliances for winter air conditioning and the production of domestic hot water are accompanied by an energy label. ELD directive: all clear on the label The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The ELD Labeling Directive (2010/30/EC) in fact provides that each item subject to the ErP Directive is equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power. Rinnai actively participates in these adjustments, happy to give its contribution to an eco-sustainable world Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.
€490,00
-
Ariston Ariston Gas Water Heater Model Next Evo Sft 16 Eu Methane Complete With Smoke Exhaust Kit
THIS ITEM WILL BE REPLACED WITH NEXT EVO X 16 LT. COD. 3632433 Technical features Product code: 3632165 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: XL profile Characteristics of heating/DHW operation: Category II 2H3P Nominal thermal power kW 28 Minimum thermal power kW 5.4 Modulation range 6 - 31.0 Nominal heat input kW 31 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow l/min > 2.0 Flow rate (ΔT 25°C) l/min 16.0 Flow rate with temperature difference (Δt) 25 °C l/min 8.5 Supply voltage (Freq. 50 HZ) V 230 Maximum absorbed power W 49 Protection type IPX4D Power supply: METHANE General characteristics Next Evo EU The sealed chamber instantaneous water heater Ariston launches Next Evo , the new instantaneous gas water heater for the production of domestic hot water. Characterized by an exclusive design, reduced dimensions and new functions, Next Evo is even more efficient and easy to use. The innovative electronic control of Next Evo allows you to adjust, via an intuitive LCD display, the ideal temperature for the user and to keep it constant even when the required water flow varies, thanks to the two NTC probes which measure the temperature of the both incoming and outgoing water. The central position of the smoke outlet and the extremely reduced depth (only 17.5 cm) make it extremely flexible and easy to install. Maximum energy saving is ensured by the possible integration of Next Evo with natural and forced circulation thermal solar systems: the solar kit with thermostatic valve has been designed precisely to facilitate its implementation. A new, innovative way of conceiving solar integration: versatile, practical and easy to install Characteristics: Ultra compact: only 17.5 cm deep Thermostatic: modulating temperature control via NTC probes allowing high standards in terms of energy saving and comfort Flame ionisation electronic ignition with gas savings of up to 25% compared to older generations Operation with water pressure 0.1 bar Operation even with minimum water flow rates > 2 l/min Can be integrated with solar thermal systems Presence of the smoke pressure switch Presence of the water flow switch IPX4D electrical protection Ecodesign Directive After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling? Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹. How to read energy labels There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€487,00
-
Junkers Bosch Gas Water Heater Therm 5700 S 17 Liters T5700s 17 Low Nox Complete With Methane Fume Exhaust Kit 7736504994
Gas water heater Therm 5700 S 17 liters t5700s 17 low NOx complete with methane fume exhaust kit 7736504994 Product data Symbol Unit 7736504994 Declared load profile XL Water heating energy efficiency class A Water heating energy efficiency ηwh % 83 Annual electricity consumption AEC kWh 25 Annual fuel consumption AFC GJ 18 Thermostat setting (factory setting) Tset °C 60 Sound power level within LWA dB 63 Daily electricity consumption (average climatic conditions) Qelec kWh 0.112 Daily fuel consumption Qfuel kWh 23,909 Nitrous oxide emissions (for gas and fuel oil only) NOx mg/kWh 26 Dimensions 575 x 365 x 170 mm Therm 5700 S Instantaneous gas water heater with touch display and electronic temperature control Intuitive setting thanks to the touch display Constant temperature hot water for maximum comfort Reduced gas consumption, thanks to the electronic control of the temperature of the water supplied Management with dedicated App, via accessory module Maximum comfort The Therm 5700 S water heater allows you to enjoy maximum comfort thanks to the constant supply of hot water: the temperature monitoring probe guarantees constant water production and without sudden changes in temperature Temperature control To be as efficient as possible, this water heater constantly monitors the temperature and flow rate of the water that is supplied by it, ensuring maximum comfort Intuitive setup Bosch products are designed to be intuitive and easy to use. The settings of the Therm 5700 S water heater are also very simple thanks to the touch display. Furthermore, using a special accessory, it can be controlled remotely via the Bosch Water App Low NOx emissions The water heater is designed to minimize polluting emissions Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€706,00
You have seen 96 out of 142 products