Riello Design Wall 11 Fan Coil wall mounted fan coil complete with remote control 20186360 Total yield in cooling (a) kW 1.07 Water flow l/h 196 Output in heating with 45°C water inlet (b) kW 1.27 Water pressure drop (70°C ∆T 10) kPa 13.0 Battery water content 0.54 litres Maximum working pressure 10 bar EUROKONUS 3/4" inch hydraulic connections Maximum air flow (d) m3 /h 228 Air flow at medium speed (AUTO mode) m3/h 155 Supply voltage V/ph/Hz 230/1/50 Maximum electrical power absorbed W 17.6 Sound pressure at maximum air flow (d) dB(A) 39.7 Dimensions mm WxHxD 902x335x128 Design WALL DESIGN WALL is the new range of Riello wall-mounted fan coils for residential and small commercial applications. Thanks to the DC-Brushless motor, DESIGN WALL fan coils are able to work with a high modulation of the air flow, from 0 up to 100%, to maintain a comfortable temperature inside the room and guarantee maximum silence during operation. DESIGN WALL fan coils are characterized by an extremely slim aesthetic, with a depth of only 128 mm, for perfect integration within the premises. The air distribution takes place via motorized flaps, obtaining a uniform diffusion throughout the room. Available in two versions: with remote control included and TOUCH display on the machine or for combination with the TOP wall-mounted control panel accessory (Design Wall 11÷23P). All the functions of the fan coil are guaranteed. The range is available in 3 cooling power sizes from 1070 W up to 2310 W and in heating from 1270 W up to 2600 W, in the two versions with supplied remote control or in combination with the TOP wall-mounted control panel. Ultra slim aesthetics Depth of 128 mm also with 2-3 way valve on board Motorized flaps for comfortable air distribution Controls with Touch Display Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Riello Mini 17 LN Low NOx sealed chamber water heater complete with methane fume exhaust kit Typology: Forced Draft Sealed Chamber; Model: Mini 17 LN; Sanitary energy efficiency class: A; Sanitary load profile: L; Power supply:METHANE (G20/21); Daily gas consumption: 15,175 kW/h; Sanitary Energy Efficiency: 80.2%; Annual gas consumption: 11 GJ; Emissions of nitrogen oxides (Nox): 33 mg/kWh; Hot water production Δt=30°: 13.3 litres/min; Nominal heat input: 30.0 kW; Nominal thermal power: 27.90 kW; Min/max withdrawal range: 2.5/13 litres/min; Min/max pressure: 0.2/10.0 bar; DHW temperature selection range: 36-65°C ; Supply voltage: 230/50V/Hz; Electrical protection degree: IPX4D; Dimensions: (H×W×D) 640×400×240 mm;Weight: 21 kg; Water/gas connections: 1/2” – 3/4″ Ø; RIELLO MINI From RIELLO technological research comes MINI LN, the new line of low-emission instantaneous water heaters with sealed chamber, completely renewed in design, both aesthetic and functional, able to offer maximum sanitary comfort in compliance with recent European regulations to reduce NOx emissions. The new aesthetic, elegant and linear, and the compact dimensions, allow the integration of this product in any living environment. This feature represents the ideal solution for responding to any domestic hot water production need. Prepared for installation inside the home, the new water heaters can also be installed outside, in a partially protected place, with the addition of the antifreeze kit (available as an accessory) up to a temperature of -10° c. Latest generation burner with reduced NOx emissions The new RIELLO MINI LN line is able to satisfy the most demanding requirements in terms of low emissions which will come into force from September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or less than 56 mg /kWh. The innovative hyperstoichiometric type burner allows the flame to be fed by a greater air-gas mixture than that required for combustion, resulting in a very low flame temperature. This characteristic, combined with the cooling of the burner through the water in the water heater circuit, results in a significant lowering of the polluting values ​​of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by the legislation with flying colors international. The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. The technology and the advantages of the range Innovative hyperstoichiometric and cooled burner with low emissions Wide flame modulation which allows excellent stability of the domestic hot water delivery temperature, even with minimum withdrawals Electronic ignition and ionization flame control Wide flame modulation (1 : 3) which allows perfect stability of the domestic hot water delivery temperature, even with minimum withdrawals Brand new user interface with backlit display with icons and 4 keys, to easily navigate the menu and make adjustments Abundant domestic hot water production: 11, 13 or 17 litres/min Even more compact dimensions and simple installation Mounting template and power cable supplied. Instantaneous sealed chamber water heater with methane and LPG versions Many new functions in a linear and modern design new RIELLO Mini LN are characterized by the new electronics which, combined with the modern and linear design, results in a new control panel, simple and intuitive, with many additional and innovative functions. Through a large backlit digital display (40x60 mm) and 4 command keys, the user can manage all the functions of the water heater and navigate easily in the menu. The icon language of the display makes both the general setting of the appliance and the setting of the special functions particularly intuitive, as well as immediately displaying the diagnostics of any anomalies. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview RIELLO ACQUAFUN 14 LPG WATER HEATER: Open Chamber water heater specifically dedicated to the production of hot water only. Technical specifications Product code: 20019747 Energy label specifications according to the European ErP directive Sanitary energy efficiency: Class A Load profile: profileL Characteristics of heating/DHW operation: Useful power - firebox: 23.7 - 27.2 kW Efficiency at max power: 87.1% Open room, natural draught Min/normal/max pressure bar 0.2/2/10 Camppreliev selector max 40C: 6.7£13.6 l/min Domestic hot water production: 14 l/min Dimensions (hxlxp) mm 650 x 363 x 245 ; 12.6 kgs Power supply: LPG Features list WATERFUN Methane gas LPG Open Room Automatic battery start Acquafun Open Chamber water heater for quick and easy installation without electrical connections thanks to battery power supply. It is available in two models: 11 and 14 litres. Characteristics: Automatic ignition by battery (1.5 Volt). Get rid of tension problems. The continuous flame modulation allows the selected temperature to be kept constant as the pressure and water flow vary, optimizing the combination with mechanical and thermostatic mixers. Economizer device to reduce gas consumption. Supplied battery (1.5 Volt €«¦ size C €«¦ half torch). No mains connection required. The economizer chokes the maximum power by 50% to adapt it to the various installations. Thanks to its particularly compact dimensions, it can be installed in homes with particularly limited spaces. ErP: Energy related Products The new European regulations for heat generators ErP is the acronym of "Energy related Products" and the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through a eco-design ("eco-design"). The field of action of this European Directive is extremely broad since up to now it has affected products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 they will also apply to heating products for the production of domestic hot water. Also from the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitory period between the publication of the regulations and their activation throughout the territory of the European Community is necessary to allow the full transposition of the contents by companies and market players. The energy labeling of products for heating domestic hot water production The regulations issued require that all products intended for heating and the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an energy label that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the introduction of the product from the factories to the market. All the products previously introduced, for example present near distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G. A new mod to guide the consumer The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product, to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as products with 4 - Heat Pump Water Heaters, as well as those on air conditioners, the efficiency data reported for the average climatic range. In addition to the product energy labels, European regulations have also provided for the creation of a system label in the case of creating a plant in which various appliances, components and controls operate. This labelling, thanks to the combinations of the data of the various elements used in the plant, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/operates the system (sellers-installers); this faculty was also granted to builders. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Riello Design Wall 11P Fan Coil fan coil for combination with TOP Optional wall control panel accessory 20186364 1.65 kW Total yield in cooling (a) kW 1.65 Water flow l/h 279 Output in heating with 45°C water inlet (b) kW 1.80 Water pressure drop (70°C ∆T 10) kPa 4.7 Battery water content 0.74 litres Maximum working pressure 10 bar EUROKONUS 3/4" inch hydraulic connections Maximum air flow (d) m3 /h 331 Air flow at medium speed (AUTO mode) m3/h 229 Supply voltage V/ph/Hz 230/1/50 Maximum electrical power absorbed W 229 Sound pressure at maximum air flow (d) dB(A) 42.4 Dimensions mm WxHxD 1102x335x128 Design WALL DESIGN WALL is the new range of Riello wall-mounted fan coils for residential and small commercial applications. Thanks to the DC-Brushless motor, DESIGN WALL fan coils are able to work with a high modulation of the air flow, from 0 up to 100%, to maintain a comfortable temperature inside the room and guarantee maximum silence during operation. DESIGN WALL fan coils are characterized by an extremely slim aesthetic, with a depth of only 128 mm, for perfect integration within the premises. The air distribution takes place via motorized flaps, obtaining a uniform diffusion throughout the room. Available in two versions: with remote control included and TOUCH display on the machine or for combination with the TOP wall-mounted control panel accessory (Design Wall 11÷23P). All the functions of the fan coil are guaranteed. The range is available in 3 cooling power sizes from 1070 W up to 2310 W and in heating from 1270 W up to 2600 W, in the two versions with supplied remote control or in combination with the TOP wall-mounted control panel. Ultra slim aesthetics Depth of 128 mm also with 2-3 way valve on board Motorized flaps for comfortable air distribution Controls with Touch Display Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Total cooling capacity (a) kW 2.31 Water flow rate l/h 402 Heating output with 45°C water inlet (b) kW 2.60 Water pressure drop (70°C ∆T 10) kPa 4.8 Battery water content 0.93 litres Maximum operating pressure bar 10 EUROKONUS 3/4" inch hydraulic connections Maximum air flow (d) m3 /h 228 Air flow at medium speed (AUTO mode) m3/h 283 Supply voltage V/ph/Hz 230/1/50 Maximum electrical power absorbed W 26.5 Sound pressure at maximum air flow (d) dB(A) 42.6 Dimensions mm WxHxD 1302x335x128 WALL Design DESIGN WALL is the new range of Riello wall-mounted fan coils for residential and small commercial applications. Thanks to the DC-Brushless motor, DESIGN WALL fan coils are able to work with a high modulation of the air flow, from 0 to 100%, to maintain a comfortable temperature inside the room and ensure maximum silence during operation. DESIGN WALL fan coils are characterised by an extremely thin aesthetic, with a depth of only 128 mm, for perfect integration inside the rooms. The air is distributed via motorised fins, obtaining uniform diffusion throughout the room. Available in two versions: with remote control included and TOUCH display on board the machine or for combination with the TOP wall control panel accessory (Design Wall 11÷23P). All the functions of the fan coil are guaranteed. The range is available in 3 power sizes in cooling from 1070 W up to 2310 W and in heating from 1270 W up to 2600 W, in two versions with remote control supplied or combined with the TOP wall control panel. Ultra thin aesthetics Depth of 128 mm even with 2-3 way valve on board Motorized flaps for comfortable air distribution Touch Display Controls Product Warranty : The warranty on this item is 24 months from the date of purchase.

Read more less

NB THE BOILER IS BORN WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE Riello Open Chamber boiler mod. START 28 KI LN Low NOx LPG - NEW ErP 20151435 Product code: 20151435 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: Thermal input: 31.90 kW Thermal power (80-60°C): 28.87 kW Reduced heat input: 14.00 kW Reduced thermal power (80-60°C): 12.36 kW Thermal input: 31.90 kW Reduced heat input: 9.00 kW Reduced thermal power: 7.95 kW Minimum operating pressure: 0.25-0.45 bar Quantity of hot water with Δt 25°C: 16.6 l/min Minimum domestic water flow rate: 2 l/min DHW temperature selection range: 37-60°C Flow regulator: 10 l/min NOx class: 6 Dimensions HxWxD 450x332x740 mm; Weight: 30 Kg Standard natural gas operation with possibility of conversion to LPG (G31), this modification is the responsibility of the installer or the technical assistance service START 24 KI LN (LOW NOx) Start LN is characterized by a modern design despite its essentiality and is ideal for heating and the production of domestic hot water in small and medium-sized domestic users. Start LN is available in power ratings of 24 and 28 kW with low NOx emissions <56 mg/kWh. Characteristics: Double exchanger: domestic hot water production with plate exchanger for greater resistance to the formation of limescale CTR system for more rapid achievement of the desired comfort and a reduction in consumption and temperature changes in the heating bodies 8 liter expansion vessel Low consumption circulator (IEE≤0.20) Antifreeze function which protects the heating and DHW circuits down to 0°C Standard thermoregulation on the boiler board in combination with the external probe (optional) Can be interfaced with the Remote Control Panel Hydraulic connections available as an accessory kit Standard natural gas operation with possibility of conversion to LPG (G31), this modification is the responsibility of the installer or the technical assistance service Electrical protection degree IP X5D Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Riello START AQUA CONDENS 25 BIS condensing boiler with 45 lt boiler complete with Methane - ErP fume exhaust kit Technical data Heating Nominal heat input kW 20.00 Nominal thermal power (80°/60°) kW 19.50 Sanitary technical data Nominal heat input kW 25.00 Nominal thermal power (*) kW 25.00 Profit return 30% (47th return) % 102.2 99.8 Characteristics Electrical protection degree IP X5D Maximum absorbed electrical power W 110 Electric power supply Volt -Hz 230/50 Expansion vessel l 8 Quantity of hot water at ∆t 25°C l/min 14.3 Dimensions WxDxH mm 600x450x1005 mm; 66 kgs START WATER CONDENS Start Aqua Condens is a wall mounted boiler with a 45 liter stainless steel boiler. The Riello heat exchanger made entirely of aluminum guarantees efficiency and durability, high head and reduction of polluting emissions. It is available with 25 kW power. “Range Rated” certification which allows the nominal power of the boiler to be adapted to the effective thermal requirements of the system. Three-speed circulator - Standard thermoregulation on the board in combination with the external probe (optional) Assembly template, hydraulic fittings, power supply cable supplied Standard natural gas operation with possibility of conversion to LPG (G31) (accessory), this modification is the responsibility of the installer or the technical assistance service Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: AcquaFun2 LN 11 Product code : 20149827 Methane gas Energy efficiency Sanitary energy efficiency class: A Sanitary load profile : M Sanitary energy efficiency (ηwh) : 77.2% Daily gas consumption : 8.084 kW/h Annual gas consumption : 6 GJ Emissions of nitrogen oxides: 46 mg/kWh Characteristics Typology : Open chamber Draft Natural draft Ignition : 2 x 1.5V batteries Flame control : By ionization Flame modulation : Continue Hot water production Δt=30° : 9.3 litres/min Nominal heat input : 21.0 ~ 22.0 kW Rated heat output: 18.33~19.43kW Performance Water Withdrawal range with selector at minimum : from 2.5 to 5.5 litres/min Withdrawal range with selector at maximum : from 2.5 to 11 litres/min Water temperature rise with selector at minimum : 50°C Water temperature rise with selector at maximum : 25°C Minimum ~ normal ~ maximum pressure : 0.2 ~ 2.0 ~ 10.0 bar Water connections: 12.70 mm 1/2” Ø DHW temperature selection range: 35° ~ 60° C Performance Gases Nominal supply pressure G20,G30,G31 : 20/28 ~ 30/37 mbar Gas connections: 12.70 mm 1/2” Ø Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Electrical protection degree : IPX4D Dimensions and weight Dimensions (HxWxD): 675x350x230 mm Net weight : 12.0 Kg Riello ACQUAFUN 2 LN water heater The new Low NOx open chamber water heater Riello presents Acquafun 2 LN, the new instantaneous open chamber water heater, fully signed by Riello both in terms of design and manufacturing. Product that is part of the new offer of low NOx emission products able to offer maximum sanitary comfort in compliance with the recent European regulations for the reduction of NOx emissions. The new range is available in two sizes, 11 and 14 litres, available in both CNG and LPG versions, with dedicated codes. Acquafun 2 LN, completely renewed in the aesthetic and planning design, is ideal for installation in any living context, characteristics which, together with the simplicity of maintenance and performance for the end user, distinguish Acquafun 2 as an ideal solution for the production of domestic hot water for residential use. Latest generation burner with reduced Nox emissions The innovative water-cooled hyperstoichiometric type burner allows a significant reduction in the polluting values ​​of carbon monoxide and nitrogen produced by combustion, in compliance with the demanding requirements of EU Regulation 814/2013 which requires emissions equal to or lower than 56 mg/kWh The high heat output , together with the wide flame modulation, up to 45% of the nominal output, complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort . Simple and intuitive command interface Simple and intuitive backlit display with visualization of water temperature in °C, flame presence and battery charge level Three command buttons allow you to manage all the water heater functions Ease of use for the user due to the keys with symbols dedicated to the single user functions Immediate availability of hot water The innovative electronic gas valve combined with the pressure regulator allows the immediate delivery of the power in delivery, thanks to a controlled management of the flowmeter and the NTC temperature probe. The new electronics allow simplified maintenance and high-level performance. 1. NTC temperature probe 2. Limit thermostat with reset from display 3. Exchanger 4. Cooled burner 5. Electronic gas valve with pressure regulator 6. Flow restrictor 7. Flowmeter 8. Temperature regulator EAF Cold water inlet UAC Hot water outlet The new Acquafun2 LN range is characterized by the rapid achievement of the desired hot water temperature, offering optimal comfort. Product guarantee: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Riello Design Inverter 11 b Fan Coil Fan Coil with brushless motor and on-board control panel Tangential fan coil with Brushless Inverter motor Vertical or horizontal installation (accessory) Dimensions HxWxD mm 580x760x130 Code 20116254 General characteristics Cooling capacity 7°C-12°C 1095 Thermal output 50°CW (2) 1415 Thermal efficiency 70°C-60°CW (3) 2420 Maximum air flow m3 /h (4) 197 Sound pressure dBA 42.2-24.2 Inverter design The INVERTER DESIGNS are Riello fan coils with DC Brushless Inverter motors. This technological solution allows for continuous variation from 0 to 100% of the air flow rate and consequently of the heating and cooling capacity. The INVERTER DESIGNS heat and cool any environment very quickly, it is possible to choose between two dedicated mappings: PERFORMANCE for commercial environments, which require high efficiency and great efficiency, and COMFORT to always maintain maximum silence in residential environments. Thanks to the use of DC Brushless motors, the DESIGN INVERTERS save up to 50% of electricity compared to fan coils with traditional motors (ON/OFF type). Like the whole HELIOTERM family, the DESIGN INVERTER range is characterized by an extremely slim aesthetic with a depth of only 13 cm. The range is available in 5 models in two colors (white and metallic grey), with cooling powers from 830 W up to 4560 W and hot powers from 1090 W up to 4860 W. The wide range of accessories and controls with a touch DISPLAY , support a wide range of applications. All versions can be installed vertically or horizontally (using a dedicated accessory), with connections on the left. The structure is made of galvanized sheet metal with sides in ABS in the white version, in silver sheet metal, the front delivery grille is in aluminium. - Ultra Slim aesthetics - Depth of 13cm - Two colors available - Units that can be installed both vertically and horizontally - Easy to install with connections on the left - Ease of disassembly and cleaning of the filters - Commands with Display Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: Indoor unit catalog code: AMW 25 PLUS White color Technology: ErP INVERTER Energy efficiency: Cooling efficiency SEER: 8.5 SCOP coefficient of performance: 4.6 Energy Efficiency Class (cooling): A+++ Energy Efficiency Class (heating): A++ Annual energy consumption (Pdesign +2°) Kwh/annum 107 Annual energy consumption (Pdesign -10°) Kwh/annum 761 Performance: Capacity at nominal air flow kW 2.60 Nominal absorbed power cooling: 0.60 kW Capacity at nominal air flow kW 3.60 Heating nominal absorbed power: 0.84 kW Indoor Unit Sound Pressure (Supermin/Min/Nom/Max) (db(A)): 20/25/30/35 Max Indoor Unit Sound Power (db(A)): 54 External Unit Sound Power (db(A)): 59 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant gas : R-32 Refrigerant Piping Liquid / Gas Line: mm(inch) Φ6.35/Φ9.52(1/4"/3/8") Dimensions and weight: Indoor Unit (HxWxD): 280x855x200 mm; 10 Kgs External Unit (HxWxD): 597x864x290 mm; 27 kgs General characteristics AIR MONO PLUS R-32 The AARIA MONO PLUS air conditioners, with wall installation, were born as a proposal for medium and small-sized residential environments, to allow proposals with high energy efficiency and a modern design. The unit with low environmental impact R32 refrigerant reaches energy efficiency classes A+++/A++. Outdoor unit equipped with TWIN ROTARY inverter compressor, to ensure maximum comfort during operation and indoor unit, with 4 fan speeds. AARIA MONO PLUS offers three power levels from 2.5 kW to 5.0 kW. The offer is completed by an infrared remote control supplied, through which it is possible to manage all the functions of the unit. Functions Indoor unit equipped with concealed LED DISPLAY SMART mode for automatic operation SLEEP function for maximum night comfort QUIET function for ultra silent operation ANTIFREEZE function to start the unit when the internal temperature drops below 10°C AUTORESTART function in case of power failure Outdoor unit complete with connection covers. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Riello Inverter Air Conditioner 4 Way Cassette AMK 50 P 18000 btu A++ Model: Product code: AMK 50 P Cooling Energy Efficiency: Capacity at nominal airflow 5.00 SEER kW/kW 6.10 Energy class A++ Annual energy consumption kWh/annum 264 Heating energy efficiency Capacity at nominal air flow 5.50 SCOP kW/kW 3.80 Energy class A Annual energy consumption kWh/annum 1425 Performance: Superminimum sound pressure (1) dB(A) 32 Average sound pressure 37 Dimensions and weight: Indoor Unit WxDxH mm 260x570x570; 18.5kg Panel dimensions WxDxH mm 700x700x60; 2.8kg Outdoor Unit HxLxW1xP mm 614x820x893x338; 37KG AMK console The AARIA MONO PLUS - AMK P air conditioners, with cassette installation , were born as a proposal for medium and small-sized environments, to allow proposals with high energy efficiency and a functional design. AARIA MONO PLUS AMK offers two power levels of 3.5 kW and 5.0 kW. The centrifugal fan of the indoor unit has three speeds which allow to reach high levels of silence at the super minimum speed. The unit is ultra compact with a depth of 260mm with a cover panel of 700x700mm. The outdoor unit has a high efficiency rotary compressor which minimizes vibrations and is characterized by perfect soundproofing insulation. SOFT operations for ultra silent operation DEHUMIDIFYING operation AUTORESTART function in case of power failure POWER mode for quickly reaching the temperature Outdoor unit complete with connection covers Standard infrared remote control All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Riello Air Conditioner Inverter Series Aaria Start 9000 Btu AMW25ST R-32 class A++ Wi-Fi Optional Technical features Model: Indoor unit catalog code: AMW 25 ST Technology: ErP INVERTER Power btu/h 9000 Energy efficiency: Cooling efficiency SEER: 6.2 SCOP coefficient of performance: 4.0 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating): A+ Annual energy consumption (Pdesign +2°) Kwh/annum 147 Annual energy consumption (Pdesign -10°) Kwh/annum 373 Performance: Nominal cooling air flow capacity: 2.6 kW Nominal absorbed power cooling: 0.8 kW Nominal heating air flow capacity: 3.4 kW Heating nominal absorbed power: 0.91 kW Indoor unit sound level (Supermin/Min/Nom/Max) (db(A)): 20/28/32/35 External Unit Sound Power (db(A)): 60/61 Indoor unit air flow max (m3/h): 500 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant gas : R-32 Refrigerant Piping Liquid / Gas Line: mm(inch) Φ6.35/Φ9.52(1/4"/3/8") Dimensions and weight: Indoor Unit (HxLxP): 280x820x195 mm; 8.8 kg Outdoor Unit (HxLxP): 540x780x245 mm; 27 kgs General characteristics AIR SMART R-32 The AARIA START air conditioners, for wall installation, are the Riello proposal for medium and small-sized residential environments. The unit with R32 refrigerant with low environmental impact achieves energy efficiency values ​​equal to class A++/A+, thanks to the Inverter technology. The AARIA START range is divided into four models from 2.6 kW up to 7.0 kW in cooling. The 4-speed wall-mounted indoor unit fan allows you to reach high levels of silence, up to 20 dB(A), at super minimum speed. The outdoor unit has a high efficiency rotary compressor with soundproofing insulation. By means of the infrared remote control supplied, it is possible to manage all the functions of the unit. AARIA START air conditioners can be equipped with an optional Wi-Fi kit, for complete remote management via the dedicated RiCLOUD AC APP. Functions SMART mode for automatic operation SLEEP function for maximum night comfort QUIET function for ultra silent operation AUTORESTART function in case of power failure Outdoor unit complete with connection covers Infrared remote control supplied Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less