Ebara booster set with 2 horizontal multistage cast iron pumps and 304 stainless steel manifolds 2GPE COMPACT A12/1 ESPM 2001051102 WITHOUT TANK AND WITH SILENT MONTALIQUIDI ARRANGEMENT General characteristics Brand: Ebara Model of the supplied product: 2GPE COMPACT A12/1 ESPM Supplied product code: 2001051102 Description TYPICAL APPLICATIONS The base of the group is in galvanized steel and so are the manifolds. The delivery manifold is designed to accommodate 2 tanks a membrane of the vertical type; 2 pressure switches are mounted on it, the electrical panel and a pressure gauge. Each electric pump has in suction a shut-off valve and a non-return valve, with possibility of connection to an air feeder and is equipped with another isolating valve in delivery. TECHNICAL FEATURES The HERTZ TWIN control panel is an automatic control system and protection for two centrifugal electric pumps equipped with three-phase motors induction. The panel power supply can be three-phase or single phase. The HERTZ TWIN control panels include a pump control software and allow speed adjustment of the motor by means of an electronic frequency variator (Inverter) which powers the pump motor. As the rotation speed varies pump performance varies in terms of flow rate and head allowing its optimal use in all conditions while saving energy. ADVANTAGES • Energy savings as the controller modulates the pump a depending on the hydraulic energy demand of the plant with respect to a direct connection to the network • Better and faster regulation • Reduction of water hammering thanks to a start and stop gradual • Better comfort in heating, air conditioning and heating systems pressurization • Reduced starting current • Exchange at each restart of the powered pump • Speed ​​modulation on both pumps for one optimal adjustment The typical applications of the GPE series booster sets with i paintings are: • Water supply for distribution networks, condominiums, schools, hotels, hospitals, etc. • Water supply for industry in general • Irrigation of gardens, parks and sports fields Inverter-controlled units with two horizontal multistage pumps. PUMP CHARACTERISTICS FIELD OF USE • Maximum working pressure: 10 bar • Maximum liquid temperature: 40°C MATERIALS • Pump body and support in cast iron • External jacket in AISI 304 • Technopolymer impeller and diffuser • Shaft in AISI 416 TECHNICAL DATA • Self-ventilated 2-pole asynchronous motor • Class of insulation F • IP44 degree of protection • Single-phase voltage 230V ± 10% 50Hz, three-phase voltage 230/400V ± 10% 50Hz • Permanently inserted capacitor and protection thermo-amperometric sensor with built-in automatic reset for the single-phase motor • Protection by the user for the three-phase version Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product code : DIVER 150 T-NA Power supply : 3x400V~ 50Hz Power : 1 kW (1.5 HP) Diameter : 127mm Operating range: from 0.6 to 12 m3 /h with head up to 96 metres Pumped liquid: Clean, without solid or abrasive bodies, non-aggressive Maximum presence of sand in the water: 50gr/ m3 Liquid Temperature Range : from 0°C to +35°C Maximum immersion : 20 metres Delivery port diameter: 1" 1/4 Gas Power Tolerance : +6% / -10% Maximum number of starts: 20/h Motor Protection Degree: IP 68 Engine Protection Class : F Installation : In wells, tanks and cisterns, in vertical position Special Executions on Request: Other voltages and/or frequencies. Automatic version with float. Applications DIVER electric pumps are used in systems for lifting clear water from wells, first collection tanks or cisterns, Roman wells or streams and are suitable for the distribution of pressurized water in domestic systems, small agriculture, sprinkler irrigation of gardens and vegetable gardens. The pump, particularly silent, used inside wells or tanks avoids all the problems related to suction and deactivation Construction features of the pump Submersible monobloc multistage pump with the hydraulic part under the motor which is cooled by the pumped liquid. Impellers and diffusers in Noryl reinforced with glass fiber with wear-resistant wear ring in stainless steel. Outer jacket, stator jacket, upper head with sleeve and closing ring in AISI 304 steel. Encapsulated stator. Cast iron supports. Rotor shaft extension in AISI 304. Motor side lip seal and silicon carbide/silicon carbide mechanical seal on pump side Construction Characteristics of the Engine • Submersible two-pole asynchronous type built completely in stainless steel, dry and cooled from the outside by the pumped liquid. Stator encapsulated in AISI 304L • Squirrel cage rotor mounted on ball bearings, and oversized to guarantee silence, reliability and durability • On request, the single-phase version is supplied with the CONTROL BOX • Protection by the user for the three-phase version • Automatic version with float available • Version with support base and side suction (DRY) available on request Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

General characteristics Brand: Lowara Model: Scuba Code: SC207C_L27 EAN: 8016935004435 Main category of the electric pump: monobloc (Monobloc pumps are characterized by the suction placed at right angles to the delivery) Data sheet Nominal power expressed in horse power: 1 hp Nominal power expressed in kilowatts: 0.75 kW Absorbed volts: 230V Connection diameter: 1"1/4 Outer jacket composition: stainless steel Impeller composition: technopolymer Power cord length: 20 meters Cable type: h07

Read more less

.

Read more less

.

Read more less

Ebara submersible electric pump for emptying waste water and stainless steel body RIGHT/A 75 MA 1771030021A Data sheet Brand: Ebara Code: 1771030021A Model: RIGHT/A 75 MA Data sheet Description Applications: handling of loaded liquids containing solid and/or filamentary substances in suspension; emptying of seepage water; handling of waste water (sanitary services); emptying of cesspools and discharge into sewers. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ebara submersible electric pump for emptying sewage and stainless steel body DW/AM 100 A 1589051221A Data sheet Brand: Ebara Code: 1589051221A Model: DW/AM 100A Data sheet DW: SINGLE-CHANNEL IMPELLER DW VOX: VORTEX IMPELLER Description Applications: evacuation of civil and industrial waste water; draining of wells or excavations; drainage of sub-level areas; general handling of loaded liquids also with solid and filamentary substances in suspension; emptying of seepage water; handling of sewage waste water (sanitary services); emptying of cesspools. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ebara booster set with 2 horizontal double impeller pumps with cast iron hydraulics and 304 stainless steel manifolds 2GP CDA 200 T 2001150004M WITHOUT TANK AND WITH MONTALIQUIDI ARRANGEMENT General characteristics Brand: Ebara Model of the supplied product: 2GP CDA 200 T Supplied product code: 2001150004M Data sheet Maximum flow rate, m3/h: 13.2 Maximum pumping height: 62m Maximum working pressure: 6.2 bar Maximum liquid temperature: 45°C Suction diameter: G2 Outlet diameter: G1½ Electrical connection: 400V, three-phase Motor power: 1.5 + 1.5 kW Motor type: 2 poles Description Protection and control panel with CE mark: • Very low voltage auxiliary circuit • Switching on and off of the engines by means of two pressure switches • It is possible to connect to floats, or minimum pressure switch, to avoid operation under water shortage conditions aspiration • There is a device that swaps the starting order of the pumps at every request • Diet: - single-phase 230V, 50Hz - three-phase 400V, 50Hz • Direct starting • Power circuit protection fuses • Auxiliary circuit protection fuses • IP 55 degree of protection • Main disconnect switch with door lock • Automatic switches - 0 - man. for each pump • Thermal protection reset • Indicator LEDs: - network presence - engine running - level alarm (if the optional float is installed) - motor protection (only for the three-phase version) • Alarm output setup Units with two horizontal double impeller pumps with cast iron hydraulics. TYPICAL APPLICATIONS The typical applications of the 2GP series booster sets are: • Water supply for distribution networks inherent in the sector of the building service • Water supply for industry in general • Irrigation of gardens, parks and sports fields GROUP EQUIPMENT • Two AGA series pumps with 2-pole asynchronous motor self-ventilated, efficiency class IE2 for three-phase motors starting from 0.75 kW • Switchgear: the system is equipped as standard with a control panel pump alternation control • Operation of the pumps regulated by pressure switches • Wetted parts are corrosion resistant • Base in galvanized steel • Manifolds in galvanized steel and on request AISI 304, AISI 316. I collectors are sized according to the total flow rate of the group pressurization • Shut-off valve on the suction and discharge sides of each pump • Check valve on the suction side of each pump • Pressure gauge, delivery side • Prearranged for delivery side hydroaccumulator vessel connection • Prepared for connecting external air feeders • Prepared for connection of a device against lack of water Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ebara booster set with 2 horizontal multistage pumps with cast iron body and 304 stainless steel manifolds 2GP COMPACT A/15 T 2001050201M WITHOUT TANK AND WITH SILENT MONTALIQUIDI ARRANGEMENT General characteristics Brand: Ebara Model of the product supplied: 2GP COMPACT A/15 T Supplied product code: 2001050201M Data sheet Maximum flow rate, m3/h: 9.6 Maximum pumping height: 86 m Maximum working pressure: 8.6 bar Maximum liquid temperature: 40°C Suction diameter: G1½ Outlet diameter: G1½ Electrical connection: 400V, three-phase Engine power: 1.1 + 1.1 kW Motor type: 2 poles Description Protection and control panel with CE mark • Very low voltage auxiliary circuit • Starting and stopping of the engines are controlled by two pressure switches • It is possible to connect to floats, or minimum pressure switch, for avoid operation under water shortage conditions aspiration • There is a device that swaps the starting order of the pumps at every request • Diet: - single-phase 230V, 50Hz - three-phase 400V, 50Hz • Direct starting • Power circuit protection fuses • Auxiliary circuit protection fuses • IP 55 degree of protection • Main disconnect switch with door lock • Automatic switches - 0 - man. for each pump • Thermal protection reset • Indicator LEDs: - network presence - engine running - level alarm (if the optional float is installed) - motor protection (only for the three-phase version) • Alarm output setup Groups with two horizontal multistage pumps. Units with two horizontal double impeller pumps with stainless steel hydraulics. TYPICAL APPLICATIONS The typical applications of the 2GP series booster sets are: • Water supply for distribution networks inherent in the sector of the building service • Water supply for industry in general • Irrigation of gardens, parks and sports fields GROUP EQUIPMENT • Two pumps of the COMPACT series with 2-pole asynchronous motor self-ventilated, efficiency class IE2 for three-phase motors starting from 0.6 kW • Switchgear: the system is equipped as standard with a control panel pump alternation control • Operation of the pumps regulated by pressure switches • Wetted parts are corrosion resistant • Base in galvanized steel • Manifolds in galvanized steel and on request AISI 304, AISI 316. I collectors are sized according to the total flow rate of the group pressurization • Shut-off valve on the suction and discharge sides of each pump • Check valve on the suction side of each pump • Pressure gauge, delivery side • Prearranged for delivery side hydroaccumulator vessel connection • Prepared for connecting external air feeders • Prepared for connection of a device against lack of water Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ebara double impeller centrifugal electric pump with single-phase cast iron body CDA 100 M 1210100000 General characteristics Brand: Ebara Model: CDA 100M Code: 1210100000 Data sheet Maximum flow rate, m3/h: 5.4 Maximum pumping height: 42m Maximum working pressure: 4.2 bar Maximum liquid temperature: 40°C Suction diameter: G1 Outlet diameter: G1 Electrical connection: 230V, single phase Motor power: 0.75kW Hydraulic seal: Standard (Ceramic/Carbon/NBR) Pump material: Cast iron Motor type: 2 poles Description APPLICATIONS • Pressurization of domestic systems • Small irrigation • Handling of non-aggressive liquids for civil and industrial use • Washing plants • Vehicle washing TECHNICAL FEATURES • Available with brass impeller (CDA 0.75 M GO, CDA 1.00 M/T GO) • They can be inserted in machinery for industrial use PUMP TECHNICAL DATA • Maximum working pressure: 6 bar for CDA 0.75 - 1.00, 10 bars for the rest of the range • Maximum liquid temperature: 40°C for CDA 0.75 - 1.00, 90°C for the rest of the range • Suction connection: G1 for CDA 0.75 - 1.00, G1¼ for CDA 1.50 - 2.00 - 3.00, G1½ for CDA 4.00 - 5.50 • Delivery connection: G1 for CDA 0.75 - 1.00 - 1.50 - 2.00 - 3.00, G1¼ for CDA 4.00 - 5.50 ENGINE TECHNICAL DATA • IE3 high energy efficiency motors for powers from 0.75kW • Self-ventilated 2-pole asynchronous motor • Class of insulation F • IP44 degree of protection • Single-phase voltage 230V ± 10% 50Hz, three-phase voltage 230/400V ± 10% 50Hz • Permanently inserted capacitor and protection built-in thermo-amperometric sensor with automatic reset for the motor single phase • Protection by the user for the three-phase version MATERIALS • Pump body in cast iron • Mechanical seal in Ceramic/Carbon/NBR • Impeller in PPE+PS reinforced with glass fibers for CDA 0.75 - 1.00, in brass for the rest of the range • Shaft in AISI 303 for CDA 0.75 - 1.00 - 1.50 - 2.00 - 3.00, in AISI 304 for CDA 4.00 - 5.50 • Support in aluminum for CDA 0.75 - 1.00, in cast iron for the rest of the range • Seal holder disc in AISI 304 for CDA 0.75 - 1.00, in integrated cast iron on the engine mount for the rest of the range Description Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

SUITABLE FOR THE TRANSFER OF FILTERED LIQUIDS FOR: AGRICULTURE, WINE, BOATING, GARDENING. THE LIQUIDS TO BE TRANSFERRED MUST BE NEUTRAL AND CLEAN, OR CONTAIN A PERCENTAGE OF SOLIDS (0.2-0.5% MAX) HAVING HARDNESS AND GRANULOMETRY CHARACTERISTICS SUCH AS NOT TO WEAR THE INTERNAL SHIFT SURFACES OF THE PUMP. IN EXTREME CASES A NARROW MESH FILTER FITTED TO THE TUBE MAY BE USEFUL

Read more less

.

Read more less