Technical Features Dimensions External Diameter: 16 mm Thickness: 1mm Roll Length: 50m Minimum Coating Thickness: 10 mm Burst Pressure : 28.05MPa Working Pressure : 7.01MPa Water content: 0.154 l/m SMISOL® Frio Fears neither the Heat nor the Cold It is the copper tube produced according to the EN 12735-1 standard (and ASTM B 68/M), and is pre-insulated in closed-cell expanded polyethylene of regular and uniformly distributed dimensions (UNI EN 14114). It is distributed in rolls, having the dimensions of the diameter of the tube in millimetres. The insulating sheath is produced in full compliance with the European Regulation EEC/EU 2037/2000 which requires the use of expanded insulating sheaths without the use of CFCs and HCFCs, gases harmful to health and the environment. The thickness of the sheath is also sized in such a way as to satisfy the multiple needs of this application sector. In consideration of the particular specificity of the field of use, special attention is paid to the external protective polyethylene film aimed at preventing the formation of condensation on the external wall of the product. Internal Surface The internal surface of the copper tube is shiny, clean and dry , fundamental characteristics of a product normally available on the market for industrial use. This peculiarity allows to obtain an integrated system with the terminal elements of the plant. The particular internal cleanliness of SMISOL® Frio is safeguarded by closing the ends of each roll with caps, directly during the production phase. External Protection Closed-cell expanded polyethylene coating with an average value of the water vapour diffusion resistance factor “µ” greater than 15000. The insulating sheath is produced in full compliance with the European Regulation EEC/EU 2037/2000 which requires the use of expanded insulating sheaths without the use of CFCs and HCFCs, gases harmful to health and the environment and has a fire behaviour of class BL-s1-d0 according to EN 13501-1. Coating Features Thermal conductivity: λ ≤0.040 W/m°C. Average value of the water vapour diffusion resistance factor “µ” greater than 15000. Average coating density: 33 kg/m3. Free from ammonia residues. Excellent resistance to external chemical agents. Non-flammable class BL-s1-d0 according to EN 13501-1 Free from CFCs and HCFCs (Reg. EEC/EU 2037/2000) Design Guidelines To avoid possible condensation phenomena on the pipe, it is necessary to check the environmental conditions in which the product is installed: relative humidity of the environment, temperature of the environment and of the fluid inside the pipe. In this regard, it is recommended to check using the Psychrometric chart Fields of Use Refrigeration. Transport of heat transfer fluids for multifunctional systems Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

3 LAYER TUBE. RESISTANT TO LOW AND TEMPERATURES. ACOUSTICLY OPTIMIZED. RESISTANT TO ULTRAVIOLET RAYS. RESISTANT TO AGGRESSIVE SUBSTANCES. PRE-ASSEMBLED EPDM SEALS.

Read more less

Technical Features Dimensions External Diameter: 14 mm Thickness: 1mm Roll Length: 50m Minimum Coating Thickness: 1.5mm Burst Pressure : 29.87MPa Working Pressure : 7.47MPa Water content: 0.11 l/m Foma Plast Coated Pipes for Sanitary Uses The PLAST coated copper tube is produced using the most modern wire drawing technologies; the in-line control on 100% of the production and the constant verification of the dimensional characteristics guarantee maximum safety. This quality guarantee allows us to supply the copper tube in accordance with the specifications requested by the customer, according to various standardized regulations and, if requested, according to the European regulation CE EN 1057. The same care and attention are used in the choice of materials and in the production processes of the coating, guaranteeing maximum protection from attacks exerted by the materials used for the construction. We also remember that copper is a metal whose chemical-physical characteristics are essential for energy saving and is also used in green building. Characteristics of Copper Tube Alloy: Copper Cu-DHP 99.90 min. Dimensions and tolerances: as specifically requested by the customer according to various standardized regulations or, if required, according to the European regulation CE EN 1057. Carbon residue: < 0.20 mg / dm² Physical state: Annealed (R 220 according to EN 1057) Excellent corrosion resistance Made according to the requirements of Presidential Decree no. 1095/68 Usage Water and sanitary systems Compressed air systems Gas systems above ground Coating Features PVC stellar coating PVC coating with a special "star" sheath Color: IVORY Coating thickness: approx. 1.5 mm. Fire resistance: self-extinguishing Marking: laser every meter Odorless and non-toxic Excellent plasticity and resistance to abrasion Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase

Read more less

Technical Features Dimensions External Diameter: 10 mm Thickness: 1.0mm Roll Length: 50m Minimum Coating Thickness: 6 mm Burst Pressure : 44.88MPa Working Pressure : 11.22MPa Water content: 0.050 l/m SMISOL®One Versatile and professional It is the copper tube produced according to the EN 1057 standard, pre-insulated during production with expanded polyethylene with a closed cell structure of regular and uniformly distributed dimensions. The insulating sheath is also protected externally by a special polyethylene film. Insulated according to Law 10/91 and related implementing decree (DPR412/93), for the distribution of the heat transfer fluid inside heated environments . The insulating sheath is produced in full compliance with the European Regulation EEC/EU 2037/2000 which requires the use of expanded insulating sheaths without the use of CFCs and HCFCs, gases harmful to health and the environment. The production process ensures the absolute adhesion of the insulating sheath to the external wall of the copper tube, so as to avoid the formation of cavities that negatively affect the thermal insulation capacity. The production process of the tube, coated directly in line, guarantees the absolute malleability of the product and ease of installation. Furthermore, to protect the end consumer, in compliance with EU Regulation 305/2011 for construction products (CPR), the EN1057-compliant copper tubes produced by SCT are marked with the CE mark . A further guarantee of compliance with current legislation is given by obtaining the UNI-IGQ Quality mark Internal Protection It has proven bacteriostatic properties , which make it the ideal material for water-sanitary networks, in order to prevent bacterial proliferation such as Legionellosis. SMISOL® One complies with DM174/04 (GU 166 of 17/07/04) which defines the conditions to which materials in contact with drinking water must respond. It is subjected, during the production phase, to a patented passivation and stabilization treatment of the internal wall which makes it absolutely reliable in compliance with the drinkability parameters set by the European legislation on transported drinking water (European Directive 98/83 and DL 31/01). It has a carbon residue C <0.06 mg/dm2, much lower than that set by the EN 1057 standard, which establishes a carbon content C ≤0.20 mg/dm2 External Protection The insulating sheath is made of closed-cell expanded PE compliant with Reg. EEC/EU 2037/2000 (without the use of CFC and HCFC) with an external film in green polyethylene and corrugated on the surface. The coating has a fire behaviour of class BL-s1-d0 according to EN 13501-1 Coating Features Thermal conductivity: λ ≤0.040 W/m°C. Average coating density: 30 kg/m3 Min. coating thickness: 6 mm (9 mm for diameter 22 x 1 mm) continuously monitored with laser gauge. Free from ammonia residues. Excellent resistance to external chemical agents Non-flammable class BL-s1-d0 according to EN 13501-1 Free from CFCs and HCFCs (Reg. EEC/EU 2037/2000) Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

THREADED FITTING IN MALLEABLE CAST IRON WITH WHITE CORE IDEAL FOR THE TRANSPORT OF ALL TYPES OF FLUIDS AND GASES

Read more less

TIGHTEN FITTING FOR MULTILAYER

Read more less

THREADED FITTING IN MALLEABLE CAST IRON WITH WHITE CORE IDEAL FOR THE TRANSPORT OF ALL TYPES OF FLUIDS AND GASES.

Read more less

3 LAYER TUBE. RESISTANT TO LOW AND TEMPERATURES. ACOUSTICLY OPTIMIZED. RESISTANT TO ULTRAVIOLET RAYS. RESISTANT TO AGGRESSIVE SUBSTANCES. PRE-ASSEMBLED EPDM SEALS.

Read more less

General characteristics Brand: REMS EAN: 4039976127967 Part number: 572111R220 Data sheet Press Fittings: Ø 10 – 108 (110) mm Ø ⅜ – 4" Pushing force: 32kN Universal motor: 230V, 50–60Hz, 450W Gear characteristic: Maintenance free Slip clutch: Yes Drive system with trapezoidal: Yes Overload Protection: Yes Safety Pressure Switch: Yes Item placed in sturdy metal box: Yes Description Pressing tongs/pressing rings for all common systems Complete assortment of REMS pressing tongs/pressing rings for all common pressfitting systems (pages 182 – 212). Sturdy pressing tongs/pressing rings made of tough, specially hardened steel. The press contours of REMS pressing rings/pressing tongs are system-specific and match the press contours of the corresponding pressfitting systems. This results in safe and system-compliant pressing. Construction Compact, robust, suitable for construction site use. Small size, slender shape, drive unit only 4.7 kg. Can be used anywhere, freehand, overhead, in tight corners. Secure seating of the pressing tongs/ intermediate collet thanks to automatic clamping. Also for pressing tongs/pressing rings from other brands. Pressing procedure with impulse control For work safety, operation and reliability. With the complete closure of the pressing tongs, the perfect joint is complete. The pressing tong remains closed until the direction of travel is reversed. Visual inspection of the statutory pressing (pressing tongs fully closed) is therefore perfectly possible. drive Enormous pushing and pressing force for extremely fast and perfect pressing. Thrust force 32 kN. Powerful electromechanical drive with 450 W universal motor, maintenance-free gearbox with safety slip clutch and trapezoidal drive system. Overload protection. Electronic safety switch by pressure.

Read more less

THANKS TO ITS FLEXIBILITY, IT ALLOWS TO AROUND ANY OBSTACLES (GUTTERS, BEAMS, ETC.) AND TO SOLVE ALL THE MOST COMPLICATED INSTALLATION SITUATIONS. MINIMUM LENGTH 200 MM/MAX 700 MM

Read more less

General characteristics Brand: GF EAN: 8435049303713 Code: PO924ZC Diameter: 4'' Data sheet Connection Types: Male/Female Product Material: White Heart Malleable Iron Coating: Galvanized Materials transportable by this product: all types of fluids and gases

Read more less

Technical features Dimensions External Diameter: 12 mm Thickness : 0.8mm Roll length : 50m Minimum Coating Thickness: 6 mm Burst Pressure: 29.92 MPa Working Pressure : 7.48 MPa Water Content: 0.0849 l/m SMISOL® 8 Versatile and professional SCT, with the expansion of its production range to 0.8 mm thickness , aims to offer the market a product with the best possible quality/price ratio; ensuring ease of installation and technical performance, as well as total compliance with current standards. SMISOL®8 contains a copper tube with a special internal passivation treatment, which perfectly complies with the EN 1057 standard and is CE marked as required by EU Regulation 305/2011 . Even the new dimensional range of SMISOL ® 8 has the UNI-IGQ Quality mark , which guarantees its compliance with current legislation. Offering SCT pipes with the UNI-IGQ brand means providing your customers with a further added value given by the certainty of an independent and recognized quality brand Field of Use Hot and cold drinking water Heating Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less