The product is available on order Technical features Indoor unit catalog code : PLA-M35EA Outdoor unit catalog number : SUZ-M35VA Panel: PLP-6EA Power: 12000 btu Optional Wi-Fi card : MAC-567IF-E Optional commands Remote control : PAR-SE9FA-E Infrared Receiver : PAR-SL100A-E Wired Command : PAC-YT52CRA-K Deluxe Wired Control : PAR-40MAA White Prism Remote Control : PAR-CT01MAA-SB Black Prism Remote Control : PAR-CT01MAA-PB Energy efficiency SEER : 7.4 SCOP : 4.7 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A++ Annual Energy Consumption in Cooling : 170 kWh/a Annual Energy Consumption in Heating: 774 kWh/a Performance Cooling Capacity: 3.6 kW Heating Capacity: 4.1 kW Cooling absorption: 0.90 kW Heating absorption: 0.97 kW Treated Air Indoor Unit : 11~16 m 3 /min Sound Power Level Indoor Unit : 51 dB(A) External Unit Sound Power Level: 59 dB(A) Sound Pressure Level Indoor Unit : 26~31 dB(A) Sound Pressure Level Outdoor Unit: 48 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operating range - Cooling: -10° ~ 46°C - Heating: -10° ~ 24°C Installation data Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Maximum piping length: 20 m Maximum height difference Indoor Unit / Outdoor Unit: 12 m Dimensions and weight Internal Unit Dimensions (HxWxD): 258x840x840 mm Indoor Unit Weight: 19 Kg Grid dimensions (HxWxD): 40x950x950 mm Grid weight: 5 Kg External Unit Dimensions (HxWxD): 550x800x285 mm Weight of Outdoor Unit: 35 Kg Mitsubishi Electric P Series 4 Way Cassette Units range of new units designed for the creation of a more comfortable environment, which guarantees maximum satisfaction for users. Horizontal stream The new indoor unit is equipped with the "horizontal flow" function which allows to obtain a jet of air that touches the ceiling (Coanda effect), thus increasing the sensation of comfort perceived by the occupants Condensate drain pump included The PLA series units are not only easy to install but also The provision of a drain pump with a head of 550 mm facilitates the drainage of condensate water even in critical conditions 3D i-see sensor The new 4-way recessed ceiling box is equipped with the exclusive “3D I-see Sensor”, a 360° rotating sensor with a data acquisition interval of 3 minutes. It is not only able to detect the temperature , but also the presence , position and number of people in the room Thanks to it, it is therefore possible to manage regulation logics based on the presence of occupants in the air-conditioned environment, with considerable energy savings. Energy saving Thanks to the Energy Saving mode, 3D I-see allows you to modulate the air conditioning power based on the number of people present in the room: when the crowding index corresponds to 30% of the total, the system is able to self-regulate allowing you to save conditioning energy equivalent to about 1°C. When the crowding index tends to 0%, the system switches off automatically, avoiding energy waste. The 3D I-see sensor also features the Seasonal airflow function which allows the maintenance of the set-point temperature by changing the operating mode from air conditioning to ventilation and guaranteeing further savings Comfort By activating the direct/indirect function, the user will be able to decide whether or not to direct the air flow towards the areas where the presence of people is detected. Thanks to the Seasonal airflow mode, the system is able to maintain an excellent level of comfort, avoiding cold drafts in cooling and counteracting the problem of stratification typical of heating mode Energy Save Degree of Crowding The temperature is controlled based on the number of people in the room detected by the 3d-i see sensor. If the degree of crowding is around 30%, a power of 1°C less is supplied Energy Save Empty Room When the room is empty for more than 60 minutes, the power output is reduced by 2°C When no presence is detected for more than 120 minutes, the outdoor machine turns off automatically MELCloud, the Wi-Fi control MELCloud is the new Wi-Fi control for your Mitsubishi Electric system. Taking advantage of the support of the cloud, the "Cloud", to transmit and receive information and the optional dedicated MAC-567IF-E Wi-Fi interface, you can easily control your system wherever you are via PC, tablet or smartphone ; all you need is an internet connection. The MELCloud service was created to have maximum compatibility with PCs, tablets and smartphones thanks to dedicated apps or via a web browser. One word is enough for you! MELCloud is compatible with Google Home. Saying «Hey Google!», or «Ok Google!» you have full control of the climate system. MELCloud is compatible with Amazon Alexa. A word will be enough to freely manage your air conditioning units Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Indoor units 1) Model: Indoor Unit Catalog Code : 1x MSZ-AP20VGK Power : 7000 Btu Cooling Capacity : 2.0 kW Heating Capacity : 2.5 kW Treated Air : 3,5 ~ 7,3 m 3 /min Sound Power Level : 60 dB(A) Sound pressure level : 21~42 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (HxWxD): 250x760x178 mm Indoor Unit Weight: 8.2 kg Integrated Wi-Fi 2) Model: Indoor Unit Catalog Code: 1x MFZ-KT35VG Power : 12000 Btu Cooling Capacity : 3.5 kW Heating Capacity : 4.3 kW Treated Air : 3,5 ~ 9,7 m 3 /min Sound Power Level : 54 dB(A) Sound pressure level : 19 ~ 44 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (HxWxD): 600x750x215 mm Indoor Unit Weight: 14.5 kg Wi-Fi Optional ( MAC Code-567IF-E ) Outdoor Unit Model: Catalog code Outdoor Unit : MXZ-2F42VF2/3 Max indoor units: up to 2 indoor units Energy efficiency: SEER: 8.69 SCOP: 4.6 Energy Efficiency Class in Cooling : A+++ Heating Energy Efficiency Class: A++ Annual energy consumption in Cooling : 169 kWh/a Annual energy consumption in Heating : 974 kWh/a Performance: Cooling Capacity: 4.2 kW Heating Capacity: 4.5 kW Cooling absorption: 0.98 kW Heating absorption: 0.88 kW Sound power level : 59 dB(A) Sound pressure level : 44~50 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Guaranteed temperature range: - Cooling: -10° ~ 46°C - Heating: -15° ~ 24° C Installation Data: Pipe diameter Liquid : 6.35 mm (1/4") x2 Gas pipe diameter : 9.52 mm (3/8") x2 Maximum piping length: 30 m Maximum height difference Indoor Unit / Outdoor Unit: 15 m Dimensions: External Unit Dimensions (HxWxD): 550x800x285 mm Weight of Outdoor Unit: 37.0 Kg Compact design and size The MSZ-AP units are characterized by ultra-compact dimensions , with only 2 dimensional levels for 6 different powers Integrated MELCloud The new MSZ-AP (in the VGK version) offers the user experience of MELCloud integrated into the machine. Ready to be configured and used, it allows the user to remotely manage all the air conditioner functions thanks to the Wi-Fi controller. Efficiency Thanks to careful planning and the introduction of R32 refrigerant , the efficiency of the new MSZ-AP units has significantly increased, reaching class A+++ in cooling (sizes 25 and 35) and A++ in heating across the entire lineup. Air distribution Thanks to the presence of the motorized louver, it is possible to direct the air flow to achieve maximum comfort in the room in any operating mode (sizes 25-50). Furthermore, the horizontal flow eliminates annoying drafts towards the occupants. New backlit remote The backlit remote control allows easy viewing even at night Silent operation For sizes 25/35 the sound emission of the indoor unit is only 19dB when operating at minimum speed, guaranteeing maximum acoustic comfort inside the room Night Mode By activating the Night Mode function from the remote control, it is possible to set the air conditioner for night-time operation: LED dimming Deactivation of "beep" sound 3dB reduction of outdoor unit sound emission. Advanced filtration Thanks to the air purifying filter in the internal unit, the new MSZ-AP model guarantees the removal of dust and bad odours. Furthermore, for sizes 25-50, it is possible to provide the optional silver ion air purifying filter, which captures bacteria, pollen and other allergens. Energy monitoring The new MSZ-AP model supports the energy consumption monitoring function thanks to the Cloud MELCloud remote control system. Efficiency Thanks to careful planning and the introduction of R32 refrigerant, the efficiency of the new multi-split outdoor units is significantly increased, reaching class A+++ in cooling (sizes 2F42,2F53,3F54) and A++ (sizes 2F42,2F53,3F54) in heating. Connectivity The extraordinary connectivity available with the new external units allows to satisfy every need. The MXZ-F unit demonstrates all-round versatility , being connectable to most of the indoor unit range of the Residential and Commercial Line, whether they are wall mounted, ceiling cassette or ducted. Quietness The new MXZ-F multisplit outdoor units reach a new level of operating silence, reducing the sound emission by up to 4dB compared to the previous model in cooling mode and up to 3dB in heating mode. R32: reduced environmental impact Thanks to the use of R32 refrigerant and a reduced pre-charge of the units compared to the previous model, the MXZ-F units introduce a significantly lower quantity of equivalent tons of CO2 into the environment. Automatic noise reduction mode By setting this function, it is possible to automatically decrease the noise level of the external unit as the internal loads to be satisfied decrease, such as for example during night cooling. Auto-correct links It is enough to press a button (MXZ-3E/F to MXZ-6D) or activate only one indoor unit (MXZ-2E/F) to ensure the correct connection between indoor and outdoor units. In the event of a connection error, the system will automatically correct it Mitsubishi Electric MSZ-KT Simple and elegant design The floor standing units have a design characterized by simple lines and flat surfaces that give elegance and modernity to the aesthetics and allow them to be combined perfectly with any type of furniture. High heating capacity The MFZ-KT model has a high capacity in heating mode compared to traditional air conditioners, which makes it suitable for winter and mid-season use. Multi-flow vane The delivery vent is characterized by the presence of three different deflectors, each with a profile specifically designed to optimize the distribution of the outgoing air, maximizing comfort in both cooling and heating. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Indoor units:                                                                        1) Model: Indoor unit catalog number : MSZ-AP25VG x 2 Power (BTU/h) 9000 Indoor Unit HxWxD (mm) : 299 x 798 x 219 ; 10.5kg Wi-Fi catalog number: Mac-567IF-E Outdoor Unit: Model: Outdoor unit catalog code : MXZ2F42VF Energy efficiency: SEER/SCOP (W/W): 8.54/4.62 Energy Efficiency Class (cooling) : A+++ Energy Efficiency Class (heating): A++ Performance: Nominal cooling capacity (kW): 4.2 Nominal heating capacity (kW): 4.5 Power absorbed in cooling (kW): 0.97 Absorbed power in heating (kW): 1.022 Min-max outdoor unit sound pressure (dB-A): 44/49 Nominal sound power dB(A): 59 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant gas : R-32 Guaranteed operating range: Cooling °C: -10 ~ +46 Heating °C: -15 ~ +24 Dimensions: HxWxD (mm) : 550X800X285 General characteristics MSZ-AP series R32 ecological refrigerant Elegant and compact design Horizontal air throw High seasonal energy efficiency for the whole range Optional silver ion air purifying filter Motorized deflector for lateral flow Minimum sound level Weekly timer Multi-split compatible Compatible with WiFi Receiver - MELCloud Innovation and compact design The MSZ-AP units are characterized by their ultra-compact dimensions with only 2 dimensional levels for 6 different powers. Unparalleled versatility and enviable silence MXZ-F units are connectable to most of Mitsubishi Electric's Residential and Commercial line. The silence is even more efficient than previous models. Efficiency Thanks to careful planning and the introduction of R32 refrigerant, the efficiency of the new multi-split outdoor units has significantly increased, reaching class A+++ in cooling (sizes 2F42,2F53,3F54,3F68,4F72) and A++ (sizes 2F42,2F53 ,3F54) in heating . Connectivity The extraordinary connectivity available with the new external units allows to satisfy every need. The MXZ-F unit demonstrates all-round versatility , being connectable to most of the indoor unit range of the Residential and Commercial Line, be they wall mounted, ceiling cassette or ducted units. Quietness The new MXZ-F multisplit outdoor units reach a new level of operating silence, reducing the sound emission by up to 4dB compared to the previous model in cooling mode and up to 3dB in heating mode. By setting this function, it is possible to automatically decrease the noise level of the external unit as the internal loads to be satisfied decrease, such as for example during night cooling. Energy monitoring The new MXZ-F model supports the energy consumption monitoring function thanks to the MELCloud remote control system. Auto-correct links It is enough to press a button (MXZ-3E/F to MXZ-6D) or activate only one indoor unit (MXZ-2E/F) to ensure the correct connection between indoor and outdoor units. In the event of a connection error, the system will automatically correct it. Indoor unit combination table Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Indoor units: 1) Model: Indoor unit catalog code : MSZ-AP20VF Power (BTU/h) 7000 Indoor Unit HxWxD (mm) : 250 x 760 x 178 ; 8.2kg Wi-Fi catalog number: Mac-567IF-E 2) Model: Indoor unit catalog code : MSZ-AP50VG Power (BTU/h) 18000 Indoor Unit HxWxD (mm) : 299 x 798 x 219 ; 10.5kg Wi-Fi catalog number: Mac-567IF-E Outdoor Unit: Model: Outdoor unit catalog number : MXZ-2F53VF Energy efficiency: SEER/SCOP (W/W): 8.53/4.1 Energy Efficiency Class (cooling) : A+++ Energy Efficiency Class (heating): A++ Performance: Nominal cooling capacity (kW): 5.2 Nominal heating capacity (kW): 6.4 Power absorbed in cooling (kW): 1.358 Absorbed power in heating (kW): 1.56 Min-max outdoor unit sound pressure (dB-A): 46/51 Nominal sound power dB(A): 62 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant gas : R-32 Guaranteed operating range: Cooling °C: -10 ~ +46 Heating °C: -15 ~ +24 Dimensions: HxWxD (mm) : 550X800X285; KG 37; General characteristics MSZ-AP series R32 ecological refrigerant Elegant and compact design Horizontal air throw High seasonal energy efficiency for the whole range Optional silver ion air purifying filter Motorized deflector for lateral flow Minimum sound level Weekly timer Multi-split compatible Compatible with WiFi Receiver - MELCloud Innovation and compact design The MSZ-AP units are characterized by their ultra-compact dimensions with only 2 dimensional levels for 6 different powers. Unparalleled versatility and enviable silence MXZ-F units are connectable to most of Mitsubishi Electric's Residential and Commercial line. The silence is even more efficient than previous models. Efficiency Thanks to careful planning and the introduction of R32 refrigerant, the efficiency of the new multi-split outdoor units has significantly increased, reaching class A+++ in cooling (sizes 2F42,2F53,3F54,3F68,4F72) and A++ (sizes 2F42,2F53 ,3F54) in heating . Connectivity The extraordinary connectivity available with the new external units allows to satisfy every need. The MXZ-F unit demonstrates all-round versatility , being connectable to most of the indoor unit range of the Residential and Commercial Line, be they wall mounted, ceiling cassette or ducted units. Quietness The new MXZ-F multisplit outdoor units reach a new level of operating silence, reducing the sound emission by up to 4dB compared to the previous model in cooling mode and up to 3dB in heating mode. By setting this function, it is possible to automatically decrease the noise level of the external unit as the internal loads to be satisfied decrease, such as for example during night cooling. Energy monitoring The new MXZ-F model supports the energy consumption monitoring function thanks to the MELCloud remote control system. Auto-correct links It is enough to press a button (MXZ-3E/F to MXZ-6D) or activate only one indoor unit (MXZ-2E/F) to ensure the correct connection between indoor and outdoor units. In the event of a connection error, the system will automatically correct it. Indoor unit combination table Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IF THE ITEM IS NOT IMMEDIATELY AVAILABLE IT WILL BE POSSIBLE TO ORDER IT IN 10 WORKING DAYS. First ignition excluded hydronic module ERST20DVM2D SMALL SIZE Reversible version Power supply (V,Hz, Ø) : 220~240/50/1 System water content of the module: 3.50 litres Water flow rate : 5.00 ~ 36.90 l/min System expansion vessel: 12 DHW tank volume: 200 litres Dimensions (HxWxD): 1600x595x680 mm Weight : 104Kg Outdoor Unit SUZ-SWM40VA Power supply (V,Hz, Ø) : 220~240/50/1 Liquid Pipe Diameters: 6.35 mm (1/4") Gas pipe diameters: 12.70 mm (1/2") Pipe length : 5~30 m Maximum height difference: 30 m Heating : -20°C/ + 24°C DHW : -20°C/ + 35°C Cooling : 10°C/ + 46°C R-32 refrigerant gas Dimensions (HxWxD): 880x840x330 mm Heating Air 7° / Water 35° Delta 5°C Nom. / Max kW 4.00/7.10 Max water temperature °C 60 Low water temperature 35°C (medium season)1 SCOP Rank A+++ Medium Water temperature 55°C (medium season) SCOP 3.29 Rank A++ Cooling Air 35° / Water 18° Delta 5°C 5.60/7.00 Power consumption Nom. / Max kW 1.12/1.53 Ecodan system The Ecodan - split system consists of a traditional direct expansion outdoor unit (Power Inverter or Zubadan type) and a hydronic module to be installed indoors, capable of producing cold and hot water for heating or sanitary use. The module is equipped with a control unit FTC4 Hydrotank split The Hydrotank is the indoor hydronic module for floor installation equipped with a 170, 200 or 300 liter storage tank for domestic hot water. A wide range of indoor units The internal hydronic modules of the Ecodan® - Split line offer a wide range of choices: "Hydrotank" the simplicity and practicality of the "all-in-one", incorporating a 170, 200, 300 liter boiler for the production of domestic hot water. The "Split" systems can be connected to an external unit of the "Zubadan" series to favor performance at low temperatures or of the "Ecodan®" series characterized by the largest extension of the range. Hydrotank and reversible Hydrotank The hydrotank is the hydronic module of the Ecodan® line equipped with a 170, 200 or 300 liter storage tank for domestic hot water. The Hydrotank is also available in both the "hot only" version and the reversible version with which it is also possible to produce chilled water for summer air conditioning. Both versions are particularly compact and contain all the main components of the primary hydraulic system. Attention has been paid to the smallest details: Simple, modern and elegant design; Small dimensions that allow installation even in small niches, closets, etc. Easy maintenance, all the main components can be reached simply by removing the front panel. Ease of handling thanks to the lower handle. Ease of transport even in small vans thanks to the compact dimensions and the possibility of laying it down even in a horizontal position. FTC6 control system The Ecodan® - Split systems are equipped with the new FTC6 control unit. The backlit control, which can be removed from the unit body and installed remotely, is equipped with a large display with graphic icons; from it all the operating parameters are adjusted in a simple and intuitive way, the functions are set (weekly timer, "holiday" mode, domestic hot water filling, etc.), diagnostics and consumption monitoring are accessed. Thanks to the wireless control (optional) it is possible to measure the room temperature remotely and transmit it to the body of the unit, as well as modify the main operating parameters. It is not necessary to fix it so as to make it portable in different rooms. Integrated condensate collection tray for reversible models Inside the reversible Hydrotank units there is space for the condensate collection tray. The unit is equipped with a drain piping to the rear. Exclusive “Scale trap” filter Thanks to the combination of the plate exchanger and the exclusive «Scale trap» filter, the performance of the DHW cycle remains unchanged over time. In traditional systems there is the risk that the calcium, as it precipitates, deposits inside the exchanger, reducing its exchange surface. The Hydrotank is equipped with the exclusive «Scale trap» filter which homogeneously captures the precipitated calcium before it has the possibility to settle in the exchanger. In this way the heat exchange remains unchanged, guaranteeing high performance for the production of domestic hot water SG Ready: integration with photovoltaic systems The new Ecodan® hydronic modules support the SG ready function. Acronym of Smart Grid Ready, the function allows you to maximize the self-consumption of electricity from a photovoltaic system and is implemented with 2 additional inputs. Ecodan® R32 outdoor units The new Ecodan® R32 SUZ-SWM outdoor units with capacities of 4.00, 6.00, 8.00 kW combined with the new D-Generation indoor units are the efficient and high-performance solution for heating, cooling and for the production of domestic hot water. Low GWP R32 refrigerant ; Extended operating range up to -20°C ; Efficiency class A+++ in heating and A+ for the production of domestic hot water; Delivery water temperature up to 60°C . High performance in heating The new Ecodan® R32 units are able to adapt to all system solutions and maintain high performance with outdoor temperatures down to -20°C. Seasonal energy efficiency A+++ and SCOP up to 4.62 at low temperatures. R32: a low environmental impact refrigerant The R32 refrigerant gas complies with the European directives on the reduction of the greenhouse effect, presenting a lower GWP than R410A and not damaging the ozone layer. Exclusive AA Chassis The search for a product that prides itself on its silent operation led to a complete redesign of the unit's chassis. The AA units are lower than previous generation bifan units of equal power and have a discreet and sophisticated design. To reduce fan noise, the new AA chassis outdoor units use a larger diameter fan further away from the coil Extended operating range Operating range in heating extended up to -20°C. The new outdoor units are also suitable for harsher climates. The new layout of the refrigerant circuit limits the risk of resonances and vibrations. The new compressor is installed on rubber supports and is efficiently acoustically isolated by a dedicated structure. The new design of the fan guarantees less acoustic impact. All these technological improvements guarantee a reduction of -10dB (A) in operating noise. Small size The new AA Chassis outdoor units guarantee a smaller footprint thanks to the reduced height dimensions compared to the previous model. High performance The new compressor of the AA outdoor units, more compact and powerful, allows to reach high SCOP values ​​without sacrificing power. The whole series brilliantly exceeds the seasonal energy efficiency class A++ as defined by the European directive ErP Lot 1 New base design The base of the AA outdoor units has been redesigned to optimize and facilitate condensate drainage. The improvement of the defrost logics and the layout of the coil, combined with the new condensate drainage base, make it possible to avoid the formation of ice which could limit the comfort of use. Inverter technology Heat pumps normally reduce their heating capacity when the outside air temperature drops, just as the building's heat demand increases. The inverter technology manages to compensate for the lower thermal yield at low temperatures, by increasing the rotation speed of the compressor . Conversely, when the external air temperature increases, the inverter modulates the frequency, adapting the power supplied to the required heat requirement and drastically reducing electricity consumption . Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Split systems HIDROTANK Mitsubishi Electric Heating, Cooling, Sanitary use The Ecodan® - Split system consists of a traditional direct expansion outdoor unit and a hydronic module to be installed indoors, capable of producing hot water for heating/cooling and sanitary use. The module is equipped with a control unit FTC6. A wide range of indoor units The internal hydronic modules of the Ecodan® - Split line offer a wide range of choices: • “Hydrobox” guarantees great flexibility of use and installation versatility. It is possible to associate it with a boiler for domestic hot water; there are various models including the reversible ones with which it is also possible to produce chilled water for summer air conditioning • "Hydrotank" the simplicity and practicality of the "all-in-one", incorporating a 170, 200, 300 liter boiler for the production of domestic hot water. An external unit of the "Zubadan" series can be connected to the "Split" systems to favor performance at low temperatures or of the "Ecodan®" series characterized by the largest extension of the range Domestic hot water production Efficiently produced domestic hot water; outlet temperature up to 60°C and energy class A++ Suitable for all system solutions Able to adapt to all system solutions and maintain high performance with external temperatures down to -20°C. Seasonal energy efficiency A+++ and SCOP up to 4.62 at low temperatures Hydrobox and reversible Hydrobox The Hydrobox is the Ecodan® indoor hydronic module for suspended installation, which contains all the main components of the hydraulic system. The heat exchanger, the hydraulic circulator, an expansion vessel, a supplementary electrical resistance and the safety components can be found in a very small space. Attention has been paid to the smallest details: • simple, modern and elegant design • the small size allows installation in kitchens, closets, small technical rooms, cellars, etc.. • the main components are located in the front part of the unit to facilitate service operations The Hydrobox is available in two versions : • Hydrobox usable for heating and domestic hot water production (optional) • Reversible hydrobox which adds the possibility of providing cooling to the functions of the hydrobox Hydrotank and reversible Hydrotank The Hydrotank is the indoor hydronic module for floor installation of the Ecodan® line equipped with a 170, 200 or 300 liter storage tank for domestic hot water. The Hydrotank is also available in both the "hot only" version and the reversible version with which it is also possible to produce chilled water for summer air conditioning. Both versions are particularly compact and contain all the main components of the primary hydraulic system. Attention has been paid to the smallest details: • Simple, modern and elegant design • Small dimensions that allow installation even in small niches, closets, etc.. • Easy maintenance, all the main components can be reached by simply removing the front panel • Ease of handling thanks to the lower handle • Ease of transport even in small vans thanks to the compact dimensions and the possibility of laying it down even in a horizontal position For the 300 liter models, the system side expansion tank is not included. It is necessary to obtain it from a third party and provide an outdoor space for its installation Integrated condensate collection tray for reversible models Inside the reversible Hydrotank units there is space for the condensate collection tray. The unit is equipped with a drain piping to the rear Exclusive “Scale trap” filter Thanks to the combination of the plate exchanger and the exclusive «Scale trap» filter, the performance of the DHW cycle remains unchanged over time. In traditional systems there is the risk that the calcium, as it precipitates, deposits inside the exchanger, reducing its exchange surface. The Hydrotank is equipped with the exclusive «Scale trap» filter which homogeneously captures the precipitated calcium before it has the possibility to settle in the exchanger. In this way the heat exchange remains unchanged, guaranteeing high performance for the production of domestic hot water High performance Energy class A+ for domestic hot water ACS production is optimised. Thanks to the energy saving function it is possible to reach the highest efficiency class (A+) in compliance with EU Regulation 813/2013 Improved performance thanks to the second THW5A thermistor Optimization of the DHW heating cycles and better use of the hot water in the storage tank thanks to the addition of the second THW5A thermistor, selectable from the remote control New 2-zone kit • Complete kit with all the components for the service of two thermal zones, one at high direct temperature and one mixed at low temperature • 3 selectable speeds of the circulation pump • Compact size and ease of installation: a small box that can be installed on the Hydrotank or hung on the wall for connection to the Hydrobox FTC6 control system The Ecodan® - Split systems are equipped with the new FTC6 control unit. The backlit control, which can be removed from the unit body and installed remotely, is equipped with a large display with graphic icons; from it all the operating parameters are adjusted in a simple and intuitive way, the functions are set (weekly timer, "holiday" mode, domestic hot water filling, etc.), diagnostics and consumption monitoring are accessed. Thanks to the wireless control (optional) it is possible to measure the room temperature remotely and transmit it to the body of the unit, as well as modify the main operating parameters. It is not necessary to fix it so as to make it portable in different rooms Guided start-up procedure Thanks to the guided configuration it is possible to set the main operating parameters of Ecodan directly from the command during start-up Minimum system water content: less than 1 liter per kW For each specific outdoor unit it is necessary to guarantee a minimum volume of system water, which for Ecodan® and Zubadan split units, for installations in areas with not too harsh climates, is less than 1 liter per kW of unit power external. This means that, in many cases, it will not be necessary to provide a buffer volume to satisfy the minimum required volume Continuous monitoring of operating parameters The main operating parameters can be viewed directly on the control and are collected every 5 minutes and kept in the memory for 120 minutes Ecodan® R32 outdoor units High performance in heating The new Ecodan® R32 units are able to adapt to all system solutions and maintain high performance with outdoor temperatures down to -20°C. Seasonal energy efficiency A+++ and SCOP up to 4.62 at low temperatures Extended operating range Operating range in heating extended up to -20°C. The new outdoor units are also suitable for the harshest climates Low noise Compared to the R410A version, Ecodan® R32 boasts very low noise levels, which ensure applicability even in the most sensitive contexts Flow temperature up to 60°C Thanks to the water delivery temperature up to 60°C, Ecodan® R32 adapts to any system configuration, both for underfloor heating and for radiators Outdoor units for every need Mitsubishi Electric presents the new series of Ecodan® R32 split outdoor units in sizes 4, 6, 8 kW which are added to the Ecodan® and Zubadan R410A models, dedicated to residential hydronic heating systems The AA Chassis outdoor units are available in sizes 80 and 112 Zubadan and in sizes 75 and 100 Ecodan®. The configuration of the AA-chassis units guarantees very high performance, unprecedented silence and a refined design Unparalleled silence The search for a product that prides itself on its silent operation led to a complete redesign of the unit's chassis. AA units are lower than previous generation twin fan units of equal power and have a discreet and sophisticated design • To reduce fan noise, the new AA chassis outdoor units use a larger diameter fan further away from the coil • The new refrigerant circuit layout limits the risk of resonances and vibrations • The new compressor is installed on rubber mounts and is efficiently acoustically isolated by a dedicated structure. All of these technological improvements ensure a -10dB(A) reduction in operating noise New base design The base of the AA outdoor units has been redesigned to optimize and facilitate condensate drainage. The improvement of the defrost logics and the coil layout, combined with the new condensate drainage base, make it possible to avoid the formation of ice which could limit the comfort of use High performance The new compressor of the AA outdoor units, more compact and powerful, allows to reach high SCOP values ​​without sacrificing power. The whole series brilliantly exceeds the seasonal energy efficiency class A++ as defined by the European directive ErP Lot 1 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: IF THE ITEM IS NOT IMMEDIATELY AVAILABLE IT WILL BE POSSIBLE TO ORDER IT IN 10 WORKING DAYS. First ignition excluded Mitsubishi Electric Split Hydrotank Air Water Heat Pump Reversible ERST17D-VM2D storage 170 l outdoor unit ECODAN E SUZ-SWM40VA 5,6 kW R-32 hydronic module ERST17DVM2D SMALL SIZE Power supply Tens./Freq./Phases V/Hz/n° 230/50/1 Reversible version Dimensions HxWxD mm 1400x595x680 System water content of the module 3.40 litres Min/max water flow rate l/min 5.00/25.80 System expansion vessel 12 litres DHW boiler Volume liters 170 Water/plate water exchanger Outdoor Unit SUZ-SWM40VA Voltage/Freq./Phases V/Hz/N° 230/50/1 Dimensions HxWxD mm 880x840x330 Liquid diameters mm(in) 6.35 (1/4) Gas diameters mm(in) 12.7 (1/2) Max length (min) m 30 (5) Max height difference 30 m Min/max heating -20°C/ + 24°C DHW min/max -20°C/ + 35°C Cooling min/max 10°C/ + 46°C R-32 refrigerant gas Heating Air 7° / Water 35° Delta 5°C Nom. / Max kW 4.00/7.10 Max water temperature °C 60 Low water temperature 35°C (medium season)1 SCOP Rank A+++ Medium Water temperature 55°C (medium season) SCOP 3.29 Rank A++ Cooling Air 35° / Water 18° Delta 5°C 5.60/7.00 Power consumption Nom. / Max kW 1.12/1.53 Ecodan system The Ecodan - split system consists of a traditional direct expansion outdoor unit (Power Inverter or Zubadan type) and a hydronic module to be installed indoors, capable of producing cold and hot water for heating or sanitary use. The module is equipped with a control unit FTC4 Hydrotank split The Hydrotank is the indoor hydronic module for floor installation equipped with a 170, 200 or 300 liter storage tank for domestic hot water. A wide range of indoor units The internal hydronic modules of the Ecodan® - Split line offer a wide range of choices: "Hydrotank" the simplicity and practicality of the "all-in-one", incorporating a 170, 200, 300 liter boiler for the production of domestic hot water. The "Split" systems can be connected to an external unit of the "Zubadan" series to favor performance at low temperatures or of the "Ecodan®" series characterized by the largest extension of the range. Hydrotank and reversible Hydrotank The hydrotank is the hydronic module of the Ecodan® line equipped with a 170, 200 or 300 liter storage tank for domestic hot water. The Hydrotank is also available in both the "hot only" version and the reversible version with which it is also possible to produce chilled water for summer air conditioning. Both versions are particularly compact and contain all the main components of the primary hydraulic system. Attention has been paid to the smallest details: Simple, modern and elegant design; Small dimensions that allow installation even in small niches, closets, etc. Easy maintenance, all the main components can be reached simply by removing the front panel. Ease of handling thanks to the lower handle. Ease of transport even in small vans thanks to the compact dimensions and the possibility of laying it down even in a horizontal position. FTC6 control system The Ecodan® - Split systems are equipped with the new FTC6 control unit. The backlit control, which can be removed from the unit body and installed remotely, is equipped with a large display with graphic icons; from it all the operating parameters are adjusted in a simple and intuitive way, the functions are set (weekly timer, "holiday" mode, domestic hot water filling, etc.), diagnostics and consumption monitoring are accessed. Thanks to the wireless control (optional) it is possible to measure the room temperature remotely and transmit it to the body of the unit, as well as modify the main operating parameters. It is not necessary to fix it so as to make it portable in different rooms. Integrated condensate collection tray for reversible models Inside the reversible Hydrotank units there is space for the condensate collection tray. The unit is equipped with a drain piping to the rear. Exclusive “Scale trap” filter Thanks to the combination of the plate exchanger and the exclusive «Scale trap» filter, the performance of the DHW cycle remains unchanged over time. In traditional systems there is the risk that the calcium, as it precipitates, deposits inside the exchanger, reducing its exchange surface. The Hydrotank is equipped with the exclusive «Scale trap» filter which homogeneously captures the precipitated calcium before it has the possibility to settle in the exchanger. In this way the heat exchange remains unchanged, guaranteeing high performance for the production of domestic hot water SG Ready: integration with photovoltaic systems The new Ecodan® hydronic modules support the SG ready function. Acronym of Smart Grid Ready, the function allows you to maximize the self-consumption of electricity from a photovoltaic system and is implemented with 2 additional inputs. Ecodan® R32 outdoor units The new Ecodan® R32 SUZ-SWM outdoor units with capacities of 4.00, 6.00, 8.00 kW combined with the new D-Generation indoor units are the efficient and high-performance solution for heating, cooling and for the production of domestic hot water. Low GWP R32 refrigerant ; Extended operating range up to -20°C ; Efficiency class A+++ in heating and A+ for the production of domestic hot water; Delivery water temperature up to 60°C . High performance in heating The new Ecodan® R32 units are able to adapt to all system solutions and maintain high performance with outdoor temperatures down to -20°C. Seasonal energy efficiency A+++ and SCOP up to 4.62 at low temperatures. R32: a low environmental impact refrigerant The R32 refrigerant gas complies with the European directives on the reduction of the greenhouse effect, presenting a lower GWP than R410A and not damaging the ozone layer. Exclusive AA Chassis The search for a product that prides itself on its silent operation led to a complete redesign of the unit's chassis. The AA units are lower than previous generation bifan units of equal power and have a discreet and sophisticated design. To reduce fan noise, the new AA chassis outdoor units use a larger diameter fan further away from the coil Extended operating range Operating range in heating extended up to -20°C. The new outdoor units are also suitable for harsher climates. The new layout of the refrigerant circuit limits the risk of resonances and vibrations. The new compressor is installed on rubber supports and is efficiently acoustically isolated by a dedicated structure. The new design of the fan guarantees less acoustic impact. All these technological improvements guarantee a reduction of -10dB (A) in operating noise. Small size The new AA Chassis outdoor units guarantee a smaller footprint thanks to the reduced height dimensions compared to the previous model. High performance The new compressor of the AA outdoor units, more compact and powerful, allows to reach high SCOP values ​​without sacrificing power. The whole series brilliantly exceeds the seasonal energy efficiency class A++ as defined by the European directive ErP Lot 1 New base design The base of the AA outdoor units has been redesigned to optimize and facilitate condensate drainage. The improvement of the defrost logics and the layout of the coil, combined with the new condensate drainage base, make it possible to avoid the formation of ice which could limit the comfort of use. Inverter technology Heat pumps normally reduce their heating capacity when the outside air temperature drops, just as the building's heat demand increases. The inverter technology manages to compensate for the lower thermal yield at low temperatures, by increasing the rotation speed of the compressor . Conversely, when the external air temperature increases, the inverter modulates the frequency, adapting the power supplied to the required heat requirement and drastically reducing electricity consumption . Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: IF THE ITEM IS NOT IMMEDIATELY AVAILABLE IT WILL BE POSSIBLE TO ORDER IT IN 10 WORKING DAYS. First ignition excluded hydronic module ERSD-VM2D SMALL SIZE Power supply Tens./Freq./Phases V/Hz/n° 230/50/1 Reversible version Dimensions HxWxD mm 800 x 530 x 360 System water content of the module 5.2 litres Min/max water flow rate l/min 5.00/36.90 Tens./Freq./Phases V/Hz/n° 230/50/1 System expansion vessel 10 litres Mpa 0.3 safety valve Outdoor Unit SUZ-SWM60VA Voltage/Freq./Phases V/Hz/N° 230/50/1 Dimensions HxWxD mm 880x840x330 Liquid diameters mm(in) 6.35 (1/4) Gas diameters mm(in) 12.7 (1/2) Max length (min) m 30 (5) Max height difference 30 m Min/max heating -20°C/ + 24°C DHW min/max -20°C/ + 35°C Cooling min/max 10°C/ + 46°C R-32 refrigerant gas Heating Air 7° / Water 35° Delta 5°C Capacity Nom. / Max kW 6.00/8.70 Max water temperature °C 60 Low water temperature 35°C (medium season)1 SCOP 4.67 Rank A+++ Medium Water temperature 55°C (medium season) SCOP 3.32 Rank A++ Cooling Air 35° / Water 18° Delta 5°C 6.00/8.30 Power consumption Nom. / Max kW 1.23/2.00 Ecodan system The Ecodan - split system consists of a traditional direct expansion outdoor unit (Power Inverter or Zubadan type) and a hydronic module to be installed indoors, capable of producing cold and hot water for heating or sanitary use. The module is equipped with a control unit FTC4 Split hydroboxes The Hydrobox is the indoor hydronic module for suspended installation , all the main components of the hydraulic system are enclosed in a very small space. A wide range of indoor units The internal hydronic modules of the Ecodan® - Split line offer a wide range of choices: “Hydrobox” guarantees great flexibility of use and versatility of installation. It is possible to associate it with a boiler for domestic hot water; there are various models including the reversible ones with which it is also possible to produce chilled water for summer air conditioning. "Hydrotank" the simplicity and practicality of the "all-in-one", incorporating a 170, 200, 300 liter boiler for the production of domestic hot water. "Split" systems can be connected to an external unit of the " Zubadan” to favor performance at low temperatures or the “Ecodan®” series characterized by the largest extension of the range. The Hydrobox is the Ecodan® indoor hydronic module for wall-hung installation. All the main components of the hydraulic system are enclosed inside it (heat exchanger, hydraulic circulator, expansion vessel, integrative electrical resistance and safety components). Hydrobox has been designed with the utmost care to: Design, simple and elegant; Compact dimensions, for indoor installations; Components located in the front to facilitate maintenance; Hydrobox is developed in two versions: For heating and domestic hot water; Reversible, which in addition to the functions of the classic Hydrobox also allows you to use cooling. FTC6 control system The Ecodan® - Split systems are equipped with the new FTC6 control unit. The backlit control, which can be removed from the unit body and installed remotely, is equipped with a large display with graphic icons; from it all the operating parameters are adjusted in a simple and intuitive way, the functions are set (weekly timer, "holiday" mode, domestic hot water filling, etc.), diagnostics and consumption monitoring are accessed. Thanks to the wireless control (optional) it is possible to measure the room temperature remotely and transmit it to the body of the unit, as well as modify the main operating parameters. It is not necessary to fix it so as to make it portable in different rooms. Ecodan® R32 outdoor units The new Ecodan® R32 SUZ-SWM outdoor units with capacities of 4.00, 6.00, 8.00 kW combined with the new D-Generation indoor units are the efficient and high-performance solution for heating, cooling and for the production of domestic hot water. Low GWP R32 refrigerant ; Extended operating range up to -20°C ; Efficiency class A+++ in heating and A+ for the production of domestic hot water; Delivery water temperature up to 60°C . High performance in heating The new Ecodan® R32 units are able to adapt to all system solutions and maintain high performance with outdoor temperatures down to -20°C. Seasonal energy efficiency A+++ and SCOP up to 4.62 at low temperatures. R32: a low environmental impact refrigerant The R32 refrigerant gas complies with the European directives on the reduction of the greenhouse effect, presenting a lower GWP than R410A and not damaging the ozone layer. Exclusive AA Chassis The search for a product that prides itself on its silent operation led to a complete redesign of the unit's chassis. The AA units are lower than previous generation bifan units of equal power and have a discreet and sophisticated design. To reduce fan noise, the new AA chassis outdoor units use a larger diameter fan further away from the coil Extended operating range Operating range in heating extended up to -20°C. The new outdoor units are also suitable for harsher climates. The new layout of the refrigerant circuit limits the risk of resonances and vibrations. The new compressor is installed on rubber supports and is efficiently acoustically isolated by a dedicated structure. The new design of the fan guarantees less acoustic impact. All these technological improvements guarantee a reduction of -10dB (A) in operating noise. Small size The new AA Chassis outdoor units guarantee a smaller footprint thanks to the reduced height dimensions compared to the previous model. High performance The new compressor of the AA outdoor units, more compact and powerful, allows to reach high SCOP values ​​without sacrificing power. The whole series brilliantly exceeds the seasonal energy efficiency class A++ as defined by the European directive ErP Lot 1 New base design The base of the AA outdoor units has been redesigned to optimize and facilitate condensate drainage. The improvement of the defrost logics and the layout of the coil, combined with the new condensate drainage base, make it possible to avoid the formation of ice which could limit the comfort of use. Inverter technology Heat pumps normally reduce their heating capacity when the outside air temperature drops, just as the building's heat demand increases. The inverter technology manages to compensate for the lower thermal yield at low temperatures, by increasing the rotation speed of the compressor . Conversely, when the external air temperature increases, the inverter modulates the frequency, adapting the power supplied to the required heat requirement and drastically reducing electricity consumption . Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product code : ERSC-VM2D Size : Medium Version : reversible Performance Minimum Water Flow Rate: 5.00 l/min Maximum Water Flow Rate: 36.9 l/min Speed ​​number : 5 System water content of the module: 6.1 litres Sound power : 40 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 / R410 Installation data Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 12.70 mm (1/2") Dimensions and weight Dimensions (HxWxD): 800x530x360 mm Weight : 48Kg A wide range for every need The Hydrobox is the indoor hydronic module for wall-hung installation, which contains all the main components of the hydraulic system. The heat exchanger, the hydraulic circulator, an expansion vessel, a supplementary electrical resistance and the safety components can be found in a very small space. The hydronic modules can be connected to an outdoor unit from the Ecodan® series characterized by a wide range extension or from the Zubadan series to favor performance at low temperatures. Hydrobox offers great flexibility of use and versatility of installation, it is also possible to associate it with a boiler for domestic hot water Attention has been paid to the smallest details: The simple, modern and elegant design The small size allows installation in kitchens, closets, small technical rooms, cellars, etc... The main components are located in the front of the unit to facilitate service operations Hydrobox and reversible Hydrobox The Hydrobox is available in two versions, a reversible Hydrobox which also adds the possibility of providing cooling and a hot-only Hydrobox which can be used for heating and the production of domestic hot water (optional) FTC6 control system The module is equipped with the new FTC6 control unit. The backlit control, which can be removed from the unit body and installed remotely, is equipped with a large display with graphic icons; from it all the operating parameters are adjusted in a simple and intuitive way, the functions are set (weekly timer, "holiday" mode, domestic hot water filling, etc.), diagnostics and consumption monitoring are accessed. Thanks to the wireless control (optional) it is possible to measure the room temperature remotely and transmit it to the body of the unit, as well as modify the main operating parameters. It is not necessary to fix it so as to make it portable in different rooms. SG Ready: integration with photovoltaic systems Hydronic modules support SG ready function. Acronym of Smart Grid Ready, the function allows you to maximize the self-consumption of electricity from a photovoltaic system and is implemented with 2 additional inputs. MELCloud, the Wi-Fi control Control for Ecodan systems, main functions: On / Off Mode (Auto/Heat/Cool) Control 2 Zones DHW forcing Programmable weekly timer Reports Room temperature detection and setting Weather information of the installation location Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: The product will be supplied without a command, to purchase it, select it in the drop-down menu! Technical features Model: LGH-25RVX-E Electrical data: Power supply (V/Phase/Hz): 220-240 / SINGLE PHASE / 50 Specific energy consumption class1 (SEC): A (-41.1) ErP1 data: - Max air flow rate (m3 /h): 215 Maximum sound power dB(A): 42 Performance: Fan speed: SP4 SP3 SP2 SP1 Current intensity(A): 0.48 0.28-0.29 0.16 0.10-0.11 Absorbed power(W): 62-63 33-35 16-17 8-9 Treated air volume (m3 /h): 250 188 125 63 External static pressure(Pa): 85 48 21 5 Sensible Heat Exchange Efficiency(%): 79.0 80.0 82.0 86.0 Enthalpy exchange efficiency(Cool/Heat)(%): 68.0/69.5 70.0/72.0 74.5/76.0 83.0/83.0 Sound pressure level dB(A): 27-27.5 22-23 20 17 Guaranteed operating range: T. ext(°C): -10 ~ +40 RH ext max(%): 80 T. int max(°C): 40 RH int max(%): 80 Dimensions: Number and diameter of channels: 4 x 150 mm Weight: 23Kg Dimensions (HxWxD): 289 x 735 x 780 mm General characteristics LOSSNAY – Heat recovery fans Air quality is one of the main parameters for comfort. Poor air quality in the office or in one's own home has been shown to have a heavy impact on productivity, the feeling of tiredness and the healthiness of the environment. This occurs due to the increase in the concentration of CO 2 in an environment without the correct renewal of air. To live comfortably , each person needs 400l of fresh air every hour . Ensuring correct and effective ventilation in residential and commercial buildings is necessary to ensure a healthy and comfortable environment for the occupants . Oxygen density and disturbances due to its lack The importance of proper moisture management. Bacteria and viruses find perfect conditions for their proliferation in dry environments . Their survival rate plummets in conditions of relative humidity above 50%. However, environments that are too humid are the ideal condition for the multiplication of molds and mites >. Humidity control is therefore important in order to guarantee the perfect relative humidity level for a healthy environment. Field of activity of microorganisms as a function of humidity Construction simplicity As shown in the figure, the Lossnay heat exchanger consists of a structure in special treated paper which allows the flows to cross by exchanging thermal energy between them. Thanks to the dividers that separate the intake channels from the exhaust ones, the incoming fresh air is never mixed with the outgoing one. Principle of operation The Lossnay exchanger achieves an effective total heat exchange – temperature (sensible heat) and humidity (latent heat) – using specially treated paper dividers permeable to humidity which allow the expulsion of stale air outside and the introduction of fresh air inside without the slightest mixing between the two. Comfortable air exchange regardless of heat or cold Summer - The difference between the air introduced and that already present inside is 1.7°C. The air introduced is brought to the conditions of the cooled (and dehumidified) air inside. Winter - Recovery of 4 kg/h of humidity. The air introduced is brought to the conditions of the warm (and humidified) air inside. Low noise The precise control of the flow of treated air makes it possible to significantly reduce the sound pressure of LOSSNAY up to 18 dB(A). All LGH-RVX and LGH-RVXT guarantee acoustic comfort that is also ideal for residential applications, libraries, offices, etc. Dedicated remote control PZ-61 DR-E The new wired controller dedicated to the LGHRVX and LGH-RVXT heat recovery units is renewed. Management of a group of up to 15 units Easy and intuitive. Backlit LCD screen Internal weekly timer Custom ventilation mapping for mode switching (Auto/recovery/bypass) Night purge function for summer night ventilation. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical Features Model:VL-100EU5-E Electrical Data: Power supply (V/Phase/Hz): 220-240 / SINGLE PHASE / 50 Specific energy consumption class1 (SEC): B (-28.8) ErP1 data: -Max air flow (m3 /h): 100 Max sound power dB(A): 52 Performance: Fan speed: High Low Current intensity (A): - - Power consumption (W): 31 15 Treated air volume (m3 /h): 105 60 External static pressure (Pa): - - Sensible heat exchange efficiency (%): 73 80 Sound pressure level dB(A): 37 25 Dimensions: Weight: 7.5 Kg Dimensions (HxWxD): 265 x 620 x 200 mm General Features Wall mounted heat recovery unit Internal wall unit for the supply of fresh air and the expulsion of stale air, complete with filtering system and Lossnay total heat recovery unit. -Treating the outside air to introduce it into the rooms allows you to renew the air and restore the correct amount of oxygen, control pollutants and contribute to the control of the temperature and humidity levels of the environment. A result that is obtained with the mechanical heat recovery ventilator. In new homes where the thermal insulation is highly efficient and there is therefore no natural air exchange, the use of controlled mechanical ventilation systems becomes essential. Lossnay VL-100EU5-E is ideal for residential environments with surfaces up to 80m2 and offers maximum comfort thanks to the adjustable deflector, optimal air distribution and maximum silence with just 25dB. The presence of a high-efficiency filter in class G3 allows you to eliminate fine dust by purifying the air and restoring a healthy environment. The high heat exchange efficiency reaches up to 80%. Thanks to the aesthetic refinement given by the elegant glossy white flat panel, modern and essential and the compact dimensions to ensure minimum bulk, the recuperator fits perfectly into any domestic environment. Installation is simple and intuitive: two 85 mm diameter holes are enough and no invasive interventions or false ceilings are required. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: IF THE ITEM IS NOT IMMEDIATELY AVAILABLE, IT WILL BE POSSIBLE TO ORDER IT WITHIN 10 WORKING DAYS. First ignition excluded Mitsubishi Electric Hydrobox S Reversible Air-Water Heat Pump ERSD-VM2D 5 kW with ECODAN E SUZ-SWM40VA external unit Hydronic module ERSD-VM2D SMALL SIZE Power supply Voltage/Freq./Phases V/Hz/n° 230/50/1 Reversible Version Dimensions HxWxD mm 800 x 530 x 360 Water content of the module system liters 5.2 Water flow min/max l/min 5.00/36.90 Voltage/Freq./Phases V/Hz/n° 230/50/1 Expansion vessel system 10 litres Safety valve Mpa 0.3 External Unit SUZ-SWM40VA Voltage/Freq./Phases V/Hz/N° 230/50/1 Dimensions HxWxD mm 880x840x330 Liquid diameter mm(in) 6.35 (1/4) Gas diameters mm(in) 12.7 (1/2) Max length (min) m 30 (5) Max difference in altitude 30 m Heating min/max -20°C/ + 24°C ACS min/max -20°C/ + 35°C Cooling min/max 10°C/ + 46°C R-32 refrigerant gas Heating Air 7° / Water 35° Delta 5°C Nominal / Max Capacity kW 4,00/7,10 Max water temperature °C 60 Low Water Temperature 35°C (Mid Season)1 SCOP Rank A+++ Average Water Temperature 55°C (average season) SCOP 3.29 Rank A++ Cooling Air 35° / Water 18° Delta 5°C 5.60/7.00 Power consumption Nom. / Max kW 1,12/1,53 Ecodan System The Ecodan - split system is composed of a traditional external direct expansion unit (Power Inverter or Zubadan type) and a hydronic module to be installed inside, capable of producing cold and hot water for heating or sanitary use. The module is equipped with an FTC4 control unit Hydrobox split The Hydrobox is the indoor hydronic module for wall-mounted installation , in a very small space all the main components of the hydraulic system are enclosed. A wide range of indoor units The internal hydronic modules of the Ecodan® - Split line offer a wide range of choices: “Hydrobox” guarantees great flexibility of use and versatility of installation. It can be associated with a boiler for domestic hot water; there are various models including reversible ones with which it is also possible to produce chilled water for summer air conditioning. "Hydrotank" the simplicity and practicality of the "all-in-one", incorporating a 170, 200, 300 litre boiler for the production of domestic hot water. To the "Split" systems it is possible to connect an external unit of the "Zubadan" series to favour low temperature performance or of the "Ecodan®" series characterised by the widest range extension. The Hydrobox is the indoor hydronic module for wall-mounted installation by Ecodan®. All the main components of the hydraulic system are enclosed inside (heat exchanger, hydraulic circulator, expansion vessel, integrative electrical resistance and safety components). Hydrobox has been designed with the utmost care to: Design, simple and elegant; Compact size, for indoor installations; Components located on the front to facilitate maintenance; Hydrobox is developed in two versions: For heating and domestic hot water; Reversible, which in addition to the functions of the classic Hydrobox also allows you to enjoy cooling. FTC6 Control System The Ecodan® - Split systems are equipped with the new FTC6 control unit. The backlit control, removable from the unit body and installable in a remote location, is equipped with a large display with graphic icons; from it, all the operating parameters can be adjusted in a simple and intuitive way, the functions are set (weekly timer, “holiday” mode, domestic water loading, etc.), diagnostics and consumption monitoring are accessed. Thanks to the wireless control (optional) it is possible to remotely detect the room temperature and transmit it to the unit body, as well as modify the main operating parameters. No fixing is required so it can be transported to different rooms. Ecodan® R32 outdoor units The new Ecodan® R32 SUZ-SWM outdoor units with capacities of 4.00, 6.00, 8.00 kW combined with the new D-Generation indoor units are the efficient and high-performance solution for heating, cooling and the production of domestic hot water. Low GWP R32 refrigerant ; Extended operating range down to -20°C ; Efficiency class A+++ in heating and A+ for the production of domestic hot water; Water flow temperature up to 60°C . High performance in heating The new Ecodan® R32 units are able to adapt to all system solutions and maintain high performance with external temperatures down to -20°C. Seasonal energy efficiency A+++ and SCOP up to 4.62 at low temperatures. R32: a refrigerant with low environmental impact The R32 refrigerant gas complies with European directives on the reduction of the greenhouse effect, having a lower GWP than R410A and not damaging the ozone layer. Exclusive AA Chassis The search for a product that prides itself on silent operation led to a complete redesign of the unit's chassis. The AA units are lower than the previous generation twin-fan units of the same power and have a discreet, sophisticated design. To reduce fan noise, the new external AA chassis units use a larger diameter fan further away from the battery. Extended operating range Extended heating operating range down to -20°C. The new outdoor units are also suitable for the coldest climates. The new layout of the refrigerant circuit limits the risk of resonances and vibrations. The new compressor is installed on rubber supports and is efficiently acoustically insulated by a dedicated structure. The new fan design guarantees less acoustic impact. All these technological improvements guarantee a reduction of -10dB(A) in operating noise. Small size The new AA Chassis external units guarantee a smaller footprint thanks to their reduced height compared to the previous model. High Performance The new compressor of the AA outdoor units, more compact and powerful, allows to reach high SCOP values ​​without sacrificing power. The entire series brilliantly exceeds the seasonal energy efficiency class A++ as defined by the European directive ErP Lotto 1 New base design The base of the AA outdoor units has been redesigned to optimize and facilitate condensation drainage. The improvement of the defrost logic and the layout of the battery, combined with the new condensation drainage base, allow to avoid ice formation that could limit the comfort of use. Inverter technology Heat pumps typically reduce their heating capacity when the outside air temperature drops, just when the building's heat demand increases. Inverter technology can compensate for the lower heat output at low temperatures by increasing the compressor's rotation speed . Conversely, when the outside air temperature increases, the inverter modulates the frequency, adjusting the power supplied to the required heat demand and drastically reducing electricity consumption . Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less