Technical features Product data for energy consumption - according to requirements of EU regulations no. 811/2013 and 812/2013 to complete the directive 2010/30/EU CNG code: T4600 S 15-D 23 Water heating energy efficiency class A Declared load profile XL Forced draft sealed chamber Nominal heat output (Pn) [kW] 25.4 Nominal heat input (Qn) [kW] 27.5 Power setting/modulation range (Pn,min. - Pn,max.) [kW] 3.8-25.4 Max water flow with ΔT 25 °C [l/min] 15 Max water flow with ΔT 35 °C [l/min] 10 Efficiency at 100% rated power (on PCI) [%] 92 sound pressure max. [dB(A)] 66 Power supply [V(AC)] 230 Maximum absorbed power [W] 100 Degree of electrical protection [IP] IPX4D Weight (without packaging) [kg] 11 Dimensions (H x W x D) [mm] 568 x 300 x 170 Junkers Bosch water heaters With Junkers Bosch gas and heat pump water heaters you are assured of the best technology for the production of domestic hot water, always available and perfectly tailored to the user's needs: high quality, maximum efficiency and safety, ease of installation and control savings on bills. What to ask for more? Whatever your choice, choose quality. The wide range of Junkers Bosch gas and heat pump water heaters is able to meet the needs of your customers, to whom you can offer the most suitable solution for their home. Junkers Bosch gas water heaters are available in numerous models, to meet the most diverse needs: from the smallest ones, also suitable for being inserted in kitchen wall units, to those specifically designed for outdoor installation or for large buildings. Today it is possible to satisfy domestic hot water needs also through renewable energy sources: this allows not only economic savings, but also a contribution to environmental protection. Junkers Bosch heat pump water heaters are able to supply all the hot water needed in an efficient, convenient and sustainable way, obtaining energy from the external environment and using it to heat the water. Whatever your customers' requests, with Junkers Bosch you are sure to guarantee the best response. Environmentally friendly efficiency Choosing a gas water heater can also take advantage of renewable energy sources: all gas water heater models can be fully integrated, thanks to the Solar Kit accessory, in new or existing thermal solar systems, for exploit the inexhaustible energy of the sun for the production of domestic hot water. General characteristics THERM 4600 S Therm 4600 S is the extremely compact instantaneous gas water heater and thanks to its high efficiency it guarantees reduced consumption Advantages ▶ Comes with an easy and intuitive backlit LCD display ▶ It can be connected directly to solar thermal systems for the production of domestic hot water ▶ Guarantees reduced gas consumption thanks to the electronic temperature control ▶ Thanks to the OptiFlow patent, it automatically recognizes the lengths of the flue gas intake and exhaust system Characteristics ▶ Flame ionisation electronic ignition ▶ High efficiency and wide modulation range (1:7) ▶ Works even in case of very low water pressures ▶ Extremely compact dimensions ▶ Indoor installations The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, in order to be placed on the market, heating and hot water production systems will have to comply with the ErP (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of the appliances, favoring their comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating and domestic hot water production. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding less performing technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent concrete help for the consumer, allowing him to learn more about the characteristics of the system, acquire greater awareness of the energy savings allowed and make the best choice of what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the former is supplied by the manufacturer together with the product for heating and/or domestic hot water production appliances the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing the score attributed to each appliance to increase and increasing the energy class of the system: it is therefore the task of whoever makes/installs the system to supply the consumer the correct explanatory label. The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on home consumption, approximately 80% of which is due to heating and the production of hot water, and are already being incentivized at a tax level today. Junkers Bosch is already in line with the dictates of the ErP legislation, demonstrating the future orientation that has always distinguished the brand. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Open chamber water heater Junkers Minimaxx powecontrol 14 liters WR-14 2B LPG Installation: Outdoor White color Material: Metal Length/Depth (cm): 35 Width (cm): 22 Height (cm): 65.5 Batteries Required: Yes Power (kW): 23.6 Prod hot water (l/min): 4 - 14 Combustion type: Open chamber Placement: Mural Fuel type: LPG Ideal for: Less than 150 m2 / 2 bathrooms Usage: Domestic hot water Minimaxx Maximum power in minimum space Do you need more comfort when using hot water? Is the space you have to place the water heater limited? Junkers has the solution… MINIMAXX POWERCONTROL , an ionisation water heater with compact dimensions which, thanks to the electronic-automatic ignition of the pilot flame via batteries, reduces consumption with a lower environmental impact. MINIMAXX POWERCONTROL , like all the water heaters in the Junkers range, can be integrated with thermal solar systems, with forced circulation and natural circulation. Technical features Integration with natural circulation solar thermal systems for the production of domestic hot water thanks to the new Solar Kit Possibility of satisfying all comfort needs thanks to the completeness of the range, made up of products with flow rates up to 17l/min Maximum operational safety thanks to the IPX4D electronic insulation degree Installation flexibility thanks to its small size: the 11 liter model is the smallest instantaneous gas water heater available on the market Versatility of application thanks to operation even in the presence of minimum water pressures (0.1 bar). Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

JUNKERS HYDROCOMPACT OUTDOOR 18 LT mod. WTD 18 AM EO LPG IN THE ABSENCE OF THE PRODUCT, THE NEW MODEL THERM 5600 SO 18 LPG WILL BE SUPPLIED Energy efficiency Flame ionisation electronic ignition Forced draft sealed chamber Nominal heat output: 25.4 kW Nominal heat input: 27.5 kW Efficiency at 100% of rated power: 92% Efficiency at 30% of rated power: 94% Characteristics flow rate of water supplied with DT 25 °C: 15 l/min Maximum working pressure: 12 bar Minimum operating temperature with antifreeze kit: -25°C (standard) Remote control: Standard Display: LCD multifunction (in remote control) Degree of protection: IPX5D Dimensions Dimensions (LxWxH): mm 170x300x568 Hydrocompact Outdoor: Compact gas instantaneous water heaters for indoor use Finally out! HYDROCOMPACTOUTDOOR the new water heater in the Junkers range specially designed for outdoors: easy to install, simple to program. Outside with tranquillity HYDROCOMPACTOUTDOOR the new water heater designed for outdoors which expands the range of Junkers solutions for the production of domestic hot water. Thanks to the standard anti-freeze device and the IPX5D electrical protection degree, which represents one of the highest protection indexes against the infiltration of water and dust, HYDROCOMPACTOUTDOOR is resistant to the cold (up to -25 C) and bad weather, without any further precautions. Simple to install and operate Replacing your appliance with the new HYDROCOMPACT OUTDOOR has never been so simple! The new Junkers water heater, in fact, does not require any suction or flue gas system. The absence of suction and discharge pipes translates into minimal masonry work and extremely reduced installation times: in a single word, greater savings! HYDROCOMPACTOUTDOOR can be easily managed from inside the home, in an easy and intuitive way, thanks to the large display of the remote control. With a simple click it is possible to program the water heater to modify the hot water temperature at any time, to always have the maximum desired sanitary comfort. Small consumption, great performance HYDROCOMPACTOUTDOOR is presented on the market with a 1 liter plus: the completeness of the range, made up of 12, 15 and 18 l/min appliances, makes it possible to satisfy all comfort needs, from the smallest to the most complex. Furthermore, thanks to the high efficiency at the wide modulation range (1:7) the water heater is able to adapt the consumption of gas necessary to heat the water to the real demand for sanitary water withdrawal, thus guaranteeing all the sanitary comfort you desire and maximum savings. Furthermore, HYDROCOMPACTOUTDOOR can be directly connected to thermal solar systems for the production of domestic hot water. Characteristics: Instantaneous water heaters, 2 - Forced draft sealed chamber water heaters, with electronic temperature control (stability, ¤ 1C) For outdoor installations It does not require aspiration/flue gas systems Resistant to bad weather thanks to the anti-gel device (up to -25 C) and the IPX5D electrical protection degree Efficiency final 94% Directly connectable to thermal solar systems for the production of domestic hot water, by means of a special TWM 20 mixing valve Management from inside the home, easy and intuitive, thanks to the remote control with large LCD display for temperature regulation and viewing of information relating to appliance operation Flexibility of installation thanks to the compact dimensions. Furthermore, installing the remote control is very easy: it is not necessary to open the product because the electrical connection cable is positioned outside the water heater. Possibility of satisfying all comfort needs thanks to the completeness of the range, made up of 12, 15 and 18 l/min appliances High sanitary comfort reduction of gas consumption thanks to electronic temperature control (stability, ¤ 1C) Reduction of consumption thanks to the wide modulation intervals (1:7) Elegant design Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

JUNKERS HYDROCOMPACT OUTDOOR 18 LT mod. WTD 18 AM EO CNG IN THE ABSENCE OF THE PRODUCT, THE NEW METHANE THERM 5600 SO 18 MODEL WILL BE SUPPLIED Technical features DHW energy efficiency class (ErP) Catalog code: WTD 18 AM E Declared load profile: XL Instant gas water heater Forced draft sealed chamber Flame ionisation electronic ignition Nominal heat output: 31.6 kW Nominal heat input: 34 kW Efficiency at 100% of rated power: 92% Efficiency at 30% of rated power: 94% Flow rate of water supplied with DT 25 °C: 18 l/min Minimum operating flow: 2.2 l/min Maximum working pressure: 12 bar Minimum operating temperature with antifreeze kit: -25 °C (accessory) Remote control: accessory Display: LCD multifunction Degree of protection: IPX4D Dimensions (LxWxH): mm 175x364x568 Version: CNG General characteristics Hydrocompact Indoor: Compact gas instantaneous water heaters for indoor use Do you have little space available but don't want to give up the usual quality and comfort? HYDROCOMPACTINDOOR was born, the new compact water heater in the Junkers range: all the usual comfort in very little space! The most compact ever HYDROCOMPACT INDOOR is the smallest indoor water heater available on the market. All Junkers quality and high technology are enclosed in just 17 cm depth (12 and 15 l/min models)! Easily placed inside a wall unit of your kitchen (in compliance with current regulations), the new HYDROCOMPACT INDOOR represents the best solution for those with space problems: thanks to its extremely compact dimensions, in fact, it is able to satisfy any need of space and installation. The simplicity of great technology Thanks to the new Junkers patented Optiflow technology, HYDROCOMPACTINDOOR is able to automatically recognize the lengths of the flue gas intake and exhaust system. This intelligent system helps to increase the efficiency of the product, improving its performance and reducing consumption. The large display integrated in the appliance also makes it possible to manage and program its operation with extreme simplicity and to set the water temperature just as easily, according to the different comfort needs. Furthermore, for the more <span">demanding customers, it is possible to view all the information present on the integrated display also on the remote control (accessory). Thanks to the new patented OptiFlow technology, HYDROCOMPACTINDOOR is able to automatically calculate the combustion air flow, based on the power absorbed by the fan and the rotation speed of the fan itself. This guarantees: optimum efficiency of the appliance in all operating conditions the reduction of the minimum power without the risk of condensation forming on the heat exchanger very low levels of CO2 emissions Furthermore, the automatic adaptation of the fan speed to the installation conditions (length of the <span">intake/exhaust ducts and any obstructions) ensures simpler and faster installation. Small consumption, great performance With HYDROCOMPACTINDOOR, optimization of consumption is guaranteed! Thanks to the high efficiency and the wide modulation range (1:7) the water heater is able to adapt the gas consumption necessary to heat the water to the actual DHW withdrawal request, thus guaranteeing all the desired DHW comfort and the maximum savings. Furthermore, HYDROCOMPACTINDOOR can be directly connected to solar thermal systems for the production of domestic hot water: all the energy of the sun for maximum comfort and minimum consumption! Characteristics: Extremely compact dimensions: it is the smallest instantaneous gas water heater available on the market for indoor use <span">Automatic recognition of the lengths of the flue gas intake/exhaust system thanks to the patented OptiFlow technology Efficiency up to 94% Directly connectable to thermal solar systems for the production of domestic hot water, by means of a special TWM 20 mixing valve Easy and intuitive management, thanks to the large LCD display for adjusting the temperature and viewing information relating to the operation of the appliance Possibility of satisfying all comfort needs thanks to the completeness of the range, made up of 12, 15 and 18 l/min devices High sanitary comfort and reduction of gas consumption thanks to the electronic temperature control (stability ± 1°C) Reduction of consumption thanks to the wide modulation range (1:7) <span">Ability to remotely manage the water heater thanks to the accessory control <span">Elegant design Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Heating energy class: A DHW energy class (domestic hot water): A (ErP) Nominal heat output: 23 kW Nominal heat input: 24.6 kW Sanitary nominal thermal power: 28 kW Useful thermal efficiency at nominal power 40/30 °C: 101% Useful thermal efficiency at 30% nominal load 40/30 °C: 109% Continuous sanitary production: 14.1 l/min Sanitary temperature range that can be set: 40/60°C Forced draft sealed chamber Declared load profile XL NOx class: 5 Degree of protection: IP X4D Methane gas General characteristics The new Beretta CerepurHM has an easy-to-use LCD display that can also be programmed comfortably from your smartphone by downloading the JunkersHome App from any system. It works through the 1.8 mod, giving comfort with low consumption. Delivered for outdoor installation, in a fairly protected place, in compliance with current legislation. Functions: Can be combined with solar thermal systems for DHW using the Solar Kit; Can be combined with solar thermal systems for heating and DHW integration; Suitable with Ø 60 mm drains. SolarInside-ControlUnit: solar optimization on/off; Modulating premix fan and burner; High efficiency primary heat exchanger, in aluminum and silicon alloy; Sanitary heat exchanger to condense also in DHW with increased plates; Heating side expansion vessel of 12 litres; Heating side filling cock; Can be combined with CR 100 or CW thermoregulators Modulating digital thermoregulator, with soft touch display that can be installed on the wall, with an elegant and refined design, managed by a smart and functional app; Dimensions (WxLxH): 350 x 440 x 840mm; 43kg

Read more less

ATTENTION ! The boiler will be supplied with methane, for the conversion to LPG and propane air, contact the area Thermotechnical Assistance. Technical features Model : Cerapur Modul Solar ZBS 30/210-3 SOE Product code : 7738100533 Installation : Indoor / outdoor Positioning : Standing / on the ground Power supply: methane Energy efficiency Heating energy efficiency class: A Water heating energy efficiency class: A Declared load profile : XL Seasonal space heating energy efficiency : 92% Performance Nominal heat input : 6.5 ~ 30 .0 kW Nominal heat output 40°/30° : 7.1 ~ 30.6 kW Rated heat output: 6.4~29.4kW Specific flow rate (∆T = 30 K) : 26.2 l/min Boiler capacity: 204 litres Useful efficiency 40°/30° : 103 ~ 109 % Useful efficiency 80°/60° : 98,5 % Heating expansion vessel capacity: 12 litres DHW expansion vessel capacity: 8 litres Solar expansion vessel capacity: 16 litres Fan residual head : 80 Pa NOx class : 6 Electrical protection degree : X4D Dimensions and weight Dimensions (LxWxH): 600x600x1860 mm Weight : 171Kg Floor-standing condensing boiler with integrated Cerapur Modul Solar stratified solar tank Compact solar system The solar system is really very compact, in fact, in about 0.4 m², there are all the components necessary for the construction of a solar thermal system for the production of domestic hot water (DHW). Collectors are excluded. Maximum sanitary comfort The boiler has been awarded, by the European Standard EN13203-1/2, the "3-star sanitary comfort", i.e. the maximum score obtainable by appliances for the production of domestic hot water. Robust and reliable boiler Robustness and reliability of the boiler are a guarantee, thanks to the primary exchangers made with a resistant Al-Si aluminum alloy. Guaranteed energy savings Savings in energy consumption are guaranteed up to an extra 10%, thanks to the intelligent stratification function of the 204-litre storage tank, with integrated exchanger. Characteristics Primary exchanger made with Al-Si aluminum alloy Compact solar system: in about 0.4 m² all the components necessary for the construction of a solar thermal system for DHW production, collectors excluded 3-star sanitary comfort: the maximum obtainable according to EN13203-1/2 thanks to the 200-litre stratified boiler Savings in energy consumption up to an extra 10% thanks to the intelligent management of the 200-litre stratified storage tank (with integrated solar exchanger) Connectivity via MB LAN2 module as an accessory Can be installed in any context thanks to the possibility of using fume exhaust systems with a diameter of up to 60 mm External installation, in a partially protected place, in compliance with current legislation Methane version convertible to LPG and Propane Air by means of the appropriate regulation, contact the Thermotechnical Assistance Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Heating energy class: A DHW energy class (domestic hot water): A (ErP) Nominal heat output: 23 kW Nominal heat input: 24.6 kW Sanitary nominal thermal power: 28 kW Useful thermal efficiency at nominal power 40/30 °C: 101% Useful thermal efficiency at 30% nominal load 40/30 °C: 109% Continuous sanitary production: 14.1 l/min Sanitary temperature range that can be set: 40/60°C Forced draft sealed chamber Declared load profile XL NOx class: 5 Degree of protection: IP X4D Gas: LPG General characteristics The new Beretta CerepurHM has an easy-to-use LCD display that can also be programmed comfortably from your smartphone by downloading the JunkersHome App from any system. It works through the 1.8 mod, giving comfort with low consumption. Delivered for outdoor installation, in a fairly protected place, in compliance with current legislation. Functions: Can be combined with solar thermal systems for DHW using the Solar Kit; Can be combined with solar thermal systems for heating and DHW integration; Suitable with Ø 60 mm drains. SolarInside-ControlUnit: solar optimization on/off; Modulating premix fan and burner; High efficiency primary heat exchanger, in aluminum and silicon alloy; Sanitary heat exchanger to condense also in DHW with increased plates; Heating side expansion vessel of 12 litres; Heating side filling tap; Can be combined with CR 100 or CW thermoregulators Modulating digital thermoregulator, with soft touch display that can be installed on the wall, with an elegant and refined design, managed by a smart and functional app; Dimensions (WxLxH): 350 x 440 x 840mm; 43kg

Read more less

Technical features Heating and DHW energy efficiency class: Class A Nominal heat output: 34.0 kW Nominal heat input: 34.8 kW Sanitary nominal thermal power: 34.8 kW Sanitary flow rate ΔT = 30 K / Specific flow rate sec. EN 625: 16.7 / 15.3 l/min Sanitary temperature range that can be set: 40-60 °C NOx class: 5 Degree of protection: IP X4D Characteristics With expansion vessel, 3-way valve and circulator. Suitable for use with Ø 60 mm drains. Bosch Heatronic 3®, BUS system. Compatible with solar thermal systems for DHW. Patented active and passive solar optimization algorithm SolarInside-ControlUnit Possibility of electrically connecting an additional circulator. Continuous power modulation (DHW and heating). Modulating circulator. Heating side expansion vessel 12 liters (ZWBR and ZSBR). Patented high efficiency primary heat exchanger in aluminum and silicon alloy. Heating side filling cock. Dimensions Dimensions (HxWxD): 850x440x850 mm Weight: 50Kg

Read more less

Overview GAS WATER HEATER JUNKERS HYDROCOMPACT OUTDOOR WTD 12 AM EO (12 LT) METHANE 2 - FORCED DRAFT Sealed Chamber Water Heaters: Junkers Hydrocompact Outdoor, the new compact, quick and easy outdoor water heater. IN THE ABSENCE OF THE PRODUCT, THE NEW METHANE THERM 5 600 SO 12 MODEL WILL BE SUPPLIED Technical specifications DHW energy efficiency class (ErP): A Catalog code: WTD 12 AM EO Profile of charge declared: M Gas instantaneous water heater for outdoor installation Flame ionisation electronic ignition 2 - Forced draft sealed chamber water heaters Nominal heat output: 20.8 kW Nominal heat input: 22.5 kW Efficiency at 100% of rated power: 92% Efficiency at 30% of rated power: 94% Water flow rate supplied with DT 25 C: 12 l/min Maximum working pressure: 12 bar Minimum operating temperature with antifreeze kit: -25C (standard) Remote control: Standard Display: LCD multifunction (in remote control) degree of protection: IPX5D Dimensions (LxWxH): mm 170x300x568 Version: CNG Features list Hydrocompact Outdoor: Compact gas instantaneous water heaters for indoor use Finally out! HYDROCOMPACTOUTDOOR the new water heater in the Junkers range specially designed for outdoors: easy to install, simple to program. Outside with tranquillity HYDROCOMPACTOUTDOOR the new water heater designed for outdoors which expands the range of Junkers solutions for the production of domestic hot water. Thanks to the standard anti-freeze device and the IPX5D electrical protection degree, which represents one of the highest protection indexes against the infiltration of water and dust, HYDROCOMPACTOUTDOOR is resistant to the cold (up to -25 C) and bad weather, without any further precautions. Simple to install and operate Replacing your appliance with the new HYDROCOMPACT OUTDOOR has never been so simple! The new Junkers water heater, in fact, does not require any suction or flue gas system. The absence of suction and discharge pipes translates into minimal masonry work and extremely reduced installation times: in a single word, greater savings! HYDROCOMPACTOUTDOOR can be easily managed from inside the home, in an easy and intuitive way, thanks to the large display of the remote control. With a simple click it is possible to program the water heater to modify the hot water temperature at any time, to always have the maximum desired sanitary comfort. Small consumption, great performance HYDROCOMPACTOUTDOOR is presented on the market with a 1 liter plus: the completeness of the range, made up of 12, 15 and 18 l/min appliances, makes it possible to satisfy all comfort needs, from the smallest to the most complex. Furthermore, thanks to the high efficiency at the wide modulation range (1:7) the water heater is able to adapt the consumption of gas necessary to heat the water to the real demand for sanitary water withdrawal, thus guaranteeing all the sanitary comfort you desire and maximum savings. Furthermore, HYDROCOMPACTOUTDOOR can be directly connected to thermal solar systems for the production of domestic hot water. Characteristics: Instantaneous water heaters, 2 - Forced draft sealed chamber water heaters, with electronic temperature control (stability, ¤ 1C) For outdoor installations It does not require aspiration/flue gas systems Resistant to bad weather thanks to the anti-gel device (up to -25 C) and the IPX5D electrical protection degree Efficiency final 94% Directly connectable to thermal solar systems for the production of domestic hot water, by means of a special TWM 20 mixing valve Management from inside the home, easy and intuitive, thanks to the remote control with large LCD display for temperature regulation and viewing of information relating to appliance operation Flexibility of installation thanks to the compact dimensions. Furthermore, installing the remote control is very easy: it is not necessary to open the product because the electrical connection cable is positioned outside the water heater. Possibility of satisfying all comfort needs thanks to the completeness of the range, made up of 12, 15 and 18 l/min appliances High sanitary comfort reduction of gas consumption thanks to electronic temperature control (stability, ¤ 1C) Reduction of consumption thanks to the wide modulation intervals (1:7) Elegant design The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, heating systems for the production of hot water, in order to be placed on the market, will have to comply with the ErP regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of appliances, favoring comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating the production of domestic hot water. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding less performing technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent a concrete help for the consumer, allowing him to better understand the characteristics of the system, acquire greater awareness of energy saving, allowing him to choose better what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the first is supplied by the manufacturer together with the product for heating/domestic hot water production appliances the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing for an increase in the score attributed to each appliance and increasing the energy class of the system: therefore, it is the task of those who make/install the system to provide the consumer with the correct explanatory label. The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on consumption in the home, approximately 80% of which is due to heating and the production of hot water, and are now tax-incentivized. Junkers Bosch is already in line with the dictates of the ErP legislation, demonstrating the orientamental futur that has always distinguished the brand. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Overview GAS WATER HEATER JUNKERS HYDROCOMPACT INDOOR WTD 15 AM E (15 LT) METHANE 2 - Forced draft sealed chamber water heaters COMPLETE WITH FUME EXHAUST KIT: Junkers Hydrocompact Indoor is the smallest instantaneous gas water heater for indoor available on the market. IN THE ABSENCE OF THE PRODUCT, THE NEW METHANE THERM 4600 S 15 MODEL WILL BE SUPPLIED Technical specifications DHW energy efficiency class (ErP): A Catalog code: WTD 15 AM E Upload profile: XL Gas instantaneous water heater 2 - Forced draft sealed chamber water heaters Flame ionisation electronic ignition Nominal heat output: 25.4 kW Nominal heat input: 27.5 kW Efficiency at 100% of rated power: 92% Efficiency at 30% of rated power: 94% Water flow rate supplied with DT 25 C: 15 l/min Minimum operating flow: 2 l/min Maximum working pressure: 12 bar Minimum operating temperature with antifreeze kit: -25 C (accessory) Remote control: accessory Display: LCD multifunction degree of protection: IPX4D Dimensions (LxWxH): mm 170x300x568 Version: CNG Features list Hydrocompact Indoor: Compact gas instantaneous water heaters for indoor use You have little space available but you don't want to give up on quality and comfort as always It's natHYDROCOMPACTINDOOR, the new compact water heater in the Junkers range: all the usual comfort in very little space! The most compact ever HYDROCOMPACT INDOOR is the smallest indoor water heater available on the market. All Junkers quality and high technology are enclosed in just 17 cm depth (12 and 15 l/min models)! Easily placed inside a wall unit in your kitchen (in compliance with current regulations), the new HYDROCOMPACT INDOOR represents the best solution for those with space problems: thanks to its extremely compact dimensions, in fact, it is able to satisfy any need for space and installation. The simplicity of great technology Thanks to the new patented Junkers Optiflow technology, HYDROCOMPACTINDOOR is able to automatically recognize the lengths of the suction and flue gas system. This intelligent system helps to increase the efficiency of the product, improving its performance and reducing consumption. The large display integrated in the appliance also allows you to manage and program the operation with extreme simplicity, and to set the water temperature just as easily, according to the different comfort requirements. Furthermore, for the most demanding customers, it is possible to view all the information present on the integrated display as well as on the remote control (accessory). Thanks to the new patented OptiFlow technology, HYDROCOMPACTINDOOR is able to automatically calculate the combustion air flow, based on the power absorbed by the fan and the rotation speed of the fan itself. This guarantees: an optimal performance of the appliance in all operating conditions the reduction of the minimum power without the risk of condensation forming on the heat exchanger greatly reduced levels of CO2 emissions Furthermore, the automatic adaptation of the fan speed to the installation conditions (length of the intake/exhaust ducts and any obstructions) ensures simpler and faster installation. Small consumption, great performance With HYDROCOMPACTINDOOR, consumption optimization is guaranteed! Thanks to the high efficiency and the wide modulation range (1:7) the water heater is able to adapt the consumption of gas required to heat the water to the real demand for sanitary water withdrawal, thereby guaranteeing all the sanitary comfort you desire and maximum savings. Furthermore, HYDROCOMPACTINDOOR can be directly connected to thermal solar systems for the production of domestic hot water: all the energy of the sun for maximum comfort and minimum consumption! Characteristics: Extremely compact dimensions: the smallest instantaneous gas water heater available on the market Automatic recognition of the lengths of the suction/flue gas system thanks to the patented OptiFlow technology Efficiency final 94% Directly connectable to thermal solar systems for the production of domestic hot water, by means of a special TWM 20 mixing valve Easy and intuitive management, thanks to the large LCD display for adjusting the temperature and viewing information relating to the operation of the appliance Possibility of satisfying all comfort needs thanks to the completeness of the range, made up of 12, 15 and 18 l/min appliances High sanitary comfort reduction of gas consumption thanks to the electronic temperature control (stability, ¤ 1C) Reduction of consumption thanks to the wide modulation intervals (1:7) Possibility of managing the water heater remotely thanks to the accessory control Elegant design The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, heating systems for the production of hot water, in order to be placed on the market, will have to comply with the ErP regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of appliances, favoring comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating the production of domestic hot water. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding less performing technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent a concrete help for the consumer, allowing him to better understand the characteristics of the system, acquire greater awareness of energy saving, allowing him to choose better what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the first is supplied by the manufacturer together with the product for heating/domestic hot water production appliances the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing for an increase in the score attributed to each appliance and increasing the energy class of the system: therefore, it is the task of those who make/install the system to provide the consumer with the correct explanatory label. The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on consumption in the home, approximately 80% of which is due to heating and the production of hot water, and are now tax-incentivized. Junkers Bosch is already in line with the dictates of the ErP legislation, demonstrating the orientamental futur that has always distinguished the brand. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

NB; IN CASE OF LACK OF PRODUCT THE THERM 5600 MODEL WILL BE SHIPPED SO Technical features Product data for energy consumption - according to requirements of EU regulations no. 811/2013 and 812/2013 to complete the directive 2010/30/EU Catalog code: 7736504152 LPG code: T4600 SO 18-31 Water heating energy efficiency class A Declared load profile: XL External installation Room Open to Natural Draft Nominal heat output (Pn) [kW] 31.6 Nominal heat input (Qn) [kW] 34 Power setting/modulation range (Pn,min. - Pn,max.) [kW] 4.8-31.6 Flow rate of water supplied with ΔT 25 °C [l/min] 18 Flow rate of water supplied with ΔT 35 °C [l/min] 13 Efficiency at 100% of rated power [%] 92 sound pressure max. [dB(A)] 77 Power supply [V(AC)] 230 Maximum absorbed power [W] 228 Degree of electrical protection [IP] IPX5D Weight (without packaging) [kg] 12 Dimensions (H x W x D) [mm] 568 x 365 x 175 Junkers Bosch water heaters With Junkers Bosch gas and heat pump water heaters you are assured of the best technology for the production of domestic hot water, always available and perfectly tailored to the user's needs: high quality, maximum efficiency and safety, ease of installation and control savings on bills. What to ask for more? Whatever your choice, choose quality. The wide range of Junkers Bosch gas and heat pump water heaters is able to meet the needs of your customers, to whom you can offer the most suitable solution for their home. Junkers Bosch gas water heaters are available in numerous models, to meet the most diverse needs: from the smallest ones, also suitable for being inserted in kitchen wall units, to those specifically designed for outdoor installation or for large buildings. Today it is possible to satisfy domestic hot water needs also through renewable energy sources: this allows not only economic savings, but also a contribution to environmental protection. Junkers Bosch heat pump water heaters are able to supply all the hot water needed in an efficient, convenient and sustainable way, obtaining energy from the external environment and using it to heat the water. Whatever your customers' requests, with Junkers Bosch you are sure to guarantee the best response. Environmentally friendly efficiency Choosing a gas water heater can also take advantage of renewable energy sources: all gas water heater models can be fully integrated, thanks to the Solar Kit accessory, in new or existing thermal solar systems, for exploit the inexhaustible energy of the sun for the production of domestic hot water. General characteristics THERM 4600 SO THERM 4600 SO is the outdoor water heater with extremely compact dimensions. It satisfies any space and installation requirement, does not require fume extraction/exhaust systems, is resistant to cold and bad weather thanks to the antifreeze device (up to -25 °C). Furthermore, it is installed outside but can be easily managed from inside the home, in an easy and intuitive way, thanks to the large remote control display (standard). Advantages ▶ It is installed outdoors and does not require fume extraction and exhaust systems ▶ Resists the cold and bad weather thanks to the standard antifreeze device ▶ It is supplied with the remote control with display for managing the operating temperature, easy and intuitive ▶ It can be connected directly to solar thermal systems for the production of domestic hot water Characteristics ▶ Instant gas water heater with sealed chamber and forced draught for outdoor use, available in the 12, 15 and 18 l/min versions; methane and LPG ▶ Flame ionisation electronic ignition ▶ High efficiency and wide modulation range (1:7) ▶ Works even in case of very low water pressures ▶ Extremely compact dimensions The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, in order to be placed on the market, heating and hot water production systems will have to comply with the ErP (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of the appliances, favoring their comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating and domestic hot water production. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding less performing technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent concrete help for the consumer, allowing him to learn more about the characteristics of the system, acquire greater awareness of the energy savings allowed and make the best choice of what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the former is supplied by the manufacturer together with the product for heating and/or domestic hot water production appliances the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing the score attributed to each appliance to increase and increasing the energy class of the system: it is therefore the task of whoever makes/installs the system to supply the consumer the correct explanatory label. The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on home consumption, approximately 80% of which is due to heating and the production of hot water, and are already being incentivized at a tax level today. Junkers Bosch is already in line with the dictates of the ErP legislation, demonstrating the future orientation that has always distinguished the brand. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Gas water heater Therm 5700 S 17 liters t5700s 17 low NOx complete with methane fume exhaust kit 7736504994 Product data Symbol Unit 7736504994 Declared load profile XL Water heating energy efficiency class A Water heating energy efficiency ?wh % 83 Annual electricity consumption AEC kWh 25 Annual fuel consumption AFC GJ 18 Thermostat setting (factory setting) Tset °C 60 Sound power level within LWA dB 63 Daily electricity consumption (average climatic conditions) Qelec kWh 0.112 Daily fuel consumption Qfuel kWh 23,909 Nitrous oxide emissions (for gas and fuel oil only) NOx mg/kWh 26 Dimensions 575 x 365 x 170 mm Therm 5700 S Instantaneous gas water heater with touch display and electronic temperature control Intuitive setting thanks to the touch display Constant temperature hot water for maximum comfort Reduced gas consumption, thanks to the electronic control of the temperature of the water supplied Management with dedicated App, via accessory module Maximum comfort The Therm 5700 S water heater allows you to enjoy maximum comfort thanks to the constant supply of hot water: the temperature monitoring probe guarantees constant water production and without sudden changes in temperature Temperature control To be as efficient as possible, this water heater constantly monitors the temperature and flow rate of the water that is supplied by it, ensuring maximum comfort Intuitive setup Bosch products are designed to be intuitive and easy to use. The settings of the Therm 5700 S water heater are also very simple thanks to the touch display. Furthermore, using a special accessory, it can be controlled remotely via the Bosch Water App Low NOx emissions The water heater is designed to minimize polluting emissions Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less