ATTENTION THE BOILER IS SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA ASSISTANCE SERVICE IN ADVANCE Overview JUNKERS CERAPUR BALCONY ZWB 28-1 EB CONDENSING BOILER for outdoor use COMPLETE WITH FUME KIT - NEW ErP 2016: Wall mounted condensing outdoor boiler with DHW production, combinable with solar thermal systems for DHW using Solar Kit.. Technical specifications Heating and DHW energy efficiency class (ErP): A/A For heating and domestic hot waterÿ Loaded profiles declared XL Nominal heat input (heating): 24.6 kW Nominal thermal power (sanitary): 28 kW Nominal heat input (sanitary): 28.6 kW Thermal efficiency at nominal power 40/30°C: 104.3% Efficiency thermal useful at 30% nominal load 40/30°C: 109.2% Continuous sanitary production: 13.4 l/min Sanitary temperature range that can be set: 40/60°C NOx class: 5 Absorbed electric power: 230 W Degrees of protection: IP X5D Dimensions (D x W x H):ÿ285 x 535 x 775ÿmm; 54kg Version:ÿLPGÿ Main features CERAPUR BALCONY Wall-mounted condensing boiler for outdoor use with DHW production, which can be combined with solar thermal systems for DHW using the Solar Kit. Small and compact,ÿCERAPURÿBALCONY has been designed to solve space problems and resist bad weather, while ensuring maximum comfort in the production of heat and domestic hot water. Advantages: Wall-mounted condensing boilers for outdoor use with DHW production, which can be combined with solar thermal systems for DHW using the Solar Kit. Certifications achieved of tipC13, C33, C63, C83, B33. Suitable for use with 60 mm drains. Class 5 emissions required by UNI EN 297, UNI EN 483 and UNI EN 15502 standards. External installation. We will remotely control the digital room chronothermostat with the following functions: two fixed heating programs P1 and P2; a programmable P3 heating program with 22 available time slots; setting of the operating temperatures both in heating and in DHW; display of boiler operating status and any anomalies; in combination with the external probe (accessory) the functioning as a climatic control unit is activated which automatically regulates the delivery temperature according to the external temperature. Automatic antifreeze function up to an external temperature of -15°C, on both the sanitary and heating sides. Fully automatic filling function for the heating circuit. Continuous power modulation (DHW heating). Primary heat exchanger in patented high efficiency aluminosilica alloy. Domestic hot plate heat exchanger for condensing also in DHW. 6 liter heating expansion tanks. Circulator in Energy Class A. The ErP legislation and the new energy labels The future of heating systems Starting fromÿ26 September 2015ÿthe heating systems and for the production of hot water, in order to be placed on the market, will have to comply with theÿErPÿ (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiencyÿ of appliances, favoring comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating and the production of domestic hot water. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding underperforming technologies from the market. The energy labelÿwill be supplied by the manufacturer with the appliance and will represent a concrete help for the consumer, allowing him to better understand the characteristics of the system, acquire greater awareness of energy saving, allow him to choose better what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the former is supplied by the manufacturer together with the product for heating and/or domestic hot water production appliances the second for systems composed of several elements.ÿ In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing for an increase in the score attributed to each appliance and increasing the energy class of the system: therefore, the task of whoever builds/installs the system is to provide the consumer with the correct explanatory label . The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on consumption in the home, approximately 80% of which is due to heating and the production of hot water, and are currently incentivized at the tax level. Junkers Boschÿ already in line with the dictates of the ErP legislation, represent a future that has always distinguished the brand. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Overview JUNKERS CERAPUR BALCONY ZWB 28-1 EB CONDENSING BOILER for outdoor use COMPLETE WITH FUME KIT - NEW ErP 2016: Wall mounted condensing outdoor boiler with DHW production, combinable with solar thermal systems for DHW using Solar Kit.. Technical specifications Heating and DHW energy efficiency class (ErP): A/A For heating and domestic hot waterÿ Loaded profiles declared XL Nominal heat input (heating): 24.6 kW Nominal thermal power (sanitary): 28 kW Nominal heat input (sanitary): 28.6 kW Thermal efficiency at nominal power 40/30°C: 104.3% Efficiency thermal useful at 30% nominal load 40/30°C: 109.2% Continuous sanitary production: 13.4 l/min Sanitary temperature range that can be set: 40/60°C NOx class: 5 Absorbed electric power: 230 W Degrees of protection: IP X5D Dimensions (D x W x H):ÿ285 x 535 x 775ÿmm; 54kg Version:ÿMETHANEÿ Main features CERAPUR BALCONY Wall-mounted condensing boiler for outdoor use with DHW production, which can be combined with solar thermal systems for DHW using the Solar Kit. Small and compact,ÿCERAPURÿBALCONY has been designed to solve space problems and resist bad weather, while ensuring maximum comfort in the production of heat and domestic hot water. Advantages: Wall-mounted condensing boilers for outdoor use with DHW production, which can be combined with solar thermal systems for DHW using the Solar Kit. Certifications achieved of tipC13, C33, C63, C83, B33. Suitable for use with 60 mm drains. Class 5 emissions required by UNI EN 297, UNI EN 483 and UNI EN 15502 standards. External installation. We will remotely control the digital room chronothermostat with the following functions: two fixed heating programs P1 and P2; a programmable P3 heating program with 22 available time slots; setting of the operating temperatures both in heating and in DHW; display of boiler operating status and any anomalies; in combination with the external probe (accessory) the functioning as a climatic control unit is activated which automatically regulates the delivery temperature according to the external temperature. Automatic antifreeze function up to an external temperature of -15°C, on both the sanitary and heating sides. Fully automatic filling function for the heating circuit. Continuous power modulation (DHW heating). Primary heat exchanger in patented high efficiency aluminosilica alloy. Domestic hot plate heat exchanger for condensing also in DHW. 6 liter heating expansion tanks. Circulator in Energy Class A. The ErP legislation and the new energy labels The future of heating systems Starting fromÿ26 September 2015ÿthe heating systems and for the production of hot water, in order to be placed on the market, will have to comply with theÿErPÿ (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiencyÿ of appliances, favoring comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating and the production of domestic hot water. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding underperforming technologies from the market. The energy labelÿwill be supplied by the manufacturer with the appliance and will represent a concrete help for the consumer, allowing him to better understand the characteristics of the system, acquire greater awareness of energy saving, allow him to choose better what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the former is supplied by the manufacturer together with the product for heating and/or domestic hot water production appliances the second for systems composed of several elements.ÿ In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing for an increase in the score attributed to each appliance and increasing the energy class of the system: therefore, the task of whoever builds/installs the system is to provide the consumer with the correct explanatory label . The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on consumption in the home, approximately 80% of which is due to heating and the production of hot water, and are currently incentivized at the tax level. Junkers Boschÿ already in line with the dictates of the ErP legislation, represent a future that has always distinguished the brand. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

BOX NOT INCLUDED IN THE PRICE JUNKERS BOSCH CERAPUR CONDENSING BOILER BUILT-IN CONDENSING ZWB 28-1 EI 24 kW INCLUDING SMOKE KIT - NEW ErP ErP energy class (Heating and ACS) For heating and domestic hot water production Nominal heat output in domestic hot water kW 28 Nominal heat output (heating) 40/30 °C: 25.7 kW Nominal heat output (heating) 80/60 °C: 24.0 kW Minimum heat output (domestic hot water): 7.4 kW Sanitary flow rate ΔT = 30 K: 13.4 l/min NOx class: 5 Voltage v(AC): 230 Frequency HZ: 50 Electrical power consumption: 230 W IP Protection Grade: X5D Dimensions: 243 x 533 x 775; 47 Kg As standard: Controllable from home - Manage the boiler directly from inside the home, using the TF 25 remote control , supplied as standard Junkers Bosch With the strategic plan 20/20/20, Europe has the objective of producing 20% ​​less CO2, using 20% ​​more renewable energy and consuming 20% ​​less primary energy. All this by 2020. To achieve these objectives, the EU has issued the ErP (energy related products) Directive which specifies the minimum eco-design requirements for energy-using equipment, including energy efficiency. The heating world will also be affected by this revolutionary change. In fact, from 2015, the energy efficiency of boilers will be based on new performance indices that will take seasonal performance into account. Among the most significant changes in the new methodology for measuring seasonal efficiency are the introduction of different nominal temperatures, operation even at partial loads and in standby mode. The new methodology will make it possible to evaluate the performance of a boiler in real conditions, based on the efficiency level calculated over the course of an entire year. CerapurIncasso CERAPUR INCASSO is designed for concealed installations and encloses maximum convenience in just 250 mm of depth. Ideal for solving space problems, it does not alter the aesthetic beauty of homes. CERAPUR INCASSO in fact integrates perfectly into the facade thanks also to the possibility of painting the "shell" the same color as the wall. Boiler for concealed installations - Space saving inside the home and no aesthetic impact on the outside thanks to the installation in a niche in the wall Controllable from inside the home - Management of the boiler directly from inside the home, using the TF 25 remote control, supplied as standard Robust and reliable - Robustness and reliability of the boiler are guaranteed thanks to the construction of the primary exchanger in aluminium alloy Electrical insulation - The boiler has an electrical insulation rating of IPX5D Characteristics: Outdoor condensing wall-mounted boilers with DHW production that can be combined with solar thermal systems for DHW using Solar Kit. Certifications obtained of type C13, C33, C63, C83, B33. Suitable for use with Ø 60 mm drains. Emissions in class 5 as foreseen by the UNI EN 297, UNI EN 483 and UNI EN 15502 standards. External installation indicated in a specific niche, dedicated to the built-in shell (acc. 978). Automatic antifreeze function up to an external temperature of -15 °C, both on the domestic hot water and heating sides. Fully automatic filling function for the heating circuit. Continuous power modulation (sanitary and heating). Patented high efficiency aluminum-silicon alloy primary heat exchanger. Larger plate heat exchanger for domestic hot water condensation. 6 litre heating side expansion vessel. Circulator in Energy Class A. Accessories Built-in Box for Boilers: CALD_0021210 Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA ASSISTANCE SERVICE IN ADVANCE JUNKERS BOSCH CERAPUR BUILT-IN CONDENSING BOILER ZWB 28-1 EI 24 kW INCLUDING FUME KIT - NEW ErP ErP energy class (Heating and DHW) For heating and domestic hot water production DHW nominal heat input kW 28 Nominal heat output (heating) 40/30 °C: 25.7 kW Nominal heat output (heating) 80/60 °C: 24.0 kW Minimum heat input (sanitary): 7.4 kW Sanitary flow rate ΔT = 30 K: 13.4 l/min NOx class: 5 Voltage v(AC): 230 HZ frequency: 50 Absorbed electric power: 230 W IP Protection Degree: X5D Dimensions: 243 x 533 x 775; 47 kgs Standard: Controllable from home - Management of the boiler directly from inside the home, using the TF 25 remote control , supplied as standard Junkers Bosch With the strategic plan 20/20/20, Europe has the objective of producing 20% ​​less CO2, using 20% ​​more renewable energy and consuming 20% ​​less primary energy. All this by 2020. To achieve these objectives, the EU has issued the ErP Directive (energy related products) which specifies the minimum eco-design requirements for equipment that uses energy, including energy efficiency. The world of heating will also be affected by this revolutionary change. In fact, from 2015 the energy efficiency of boilers will be based on new performance indexes that will take into account seasonal performance. Among the most significant changes to the new methodology for measuring seasonal efficiency are the introduction of different nominal temperatures, operation also at partial loads and in standby mode. The new methodology will make it possible to evaluate the performance of a boiler in real conditions, based on the level of efficiency calculated over an entire year. CerapurRecessed CERAPUR INCASSO is designed for concealed installations and encloses maximum comfort in just 250 mm of depth. Ideal for solving space problems, it does not alter the aesthetic beauty of homes. In fact, CERAPUR INCASSO integrates perfectly into the façade thanks also to the possibility of painting the "shell" with the same color as the wall. Boiler for concealed installations - Space saving inside the home and no aesthetic impact on the outside thanks to the installation in the niche in the wall Controllable from inside the house - Management of the boiler directly from inside the house, using the TF 25 remote control, supplied as standard Robust and reliable - Robustness and reliability of the boiler are guaranteed thanks to the aluminum alloy construction of the primary exchanger Electrical insulation - The boiler has an IPX5D degree of electrical insulation Characteristics: Wall-mounted condensing boilers for outdoor use with DHW production that can be combined with solar thermal systems for DHW using the Solar Kit. C13, C33, C63, C83, B33 type certifications obtained. Suitable for use with Ø 60 mm drains. Class 5 emissions required by UNI EN 297, UNI EN 483 and UNI EN 15502 standards. External installation indicated in a special niche, dedicated to the built-in Guscio (acc. 978). Automatic antifreeze function up to an external temperature of -15 °C, both on the DHW and heating sides. Fully automatic filling function for the heating circuit. Continuous power modulation (DHW and heating). Patented high efficiency silicon-aluminum alloy primary heat exchanger. Oversized sanitary plate heat exchanger for condensing also in DHW. Heating side expansion vessel of 6 litres. Circulator in Energy Class A. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION, THE BOILER CAN BE ADJUSTED FOR LPG OPERATION. CONTACT YOUR LOCAL AUTHORISED SERVICE CENTRE Technical features Model : Condens GC7000iW 28 BC Product code : 7736901597 Color : Black Power supply: Methane/LPG Energy efficiency Energy efficiency class in ACS: A Energy efficiency class in heating: A Load profile: XL Performance Nominal thermal power: 24.0 kW Nominal heat output: 24.6 kW Nominal thermal power for domestic hot water: 28.0 Kw Seasonal space heating energy efficiency: 93.0 ηs % Seasonal DHW energy efficiency: 83.0 ηs % Sound power level: 50 dB(A) Class : NOx 6 Dimensions and weight Dimensions (DxWxH): 350x440x840 mm Weight: 43.0 Kg CONDENS 7000i W Design and innovation love at first sight. Ask for the best, she will give it to you. Aesthetics, innovation and savings. The new Condens 7000i W gas condensing wall-mounted boiler has a refined and exclusive design, with a white or black titanium tempered glass casing, and a heart full of technological innovations. Simple to use, it guarantees high savings and reduced consumption. Condens 7000i W is available in several versions to meet all your heating and hot water needs: heating-only version with 14 and 24 kW power, and combined version to also produce domestic hot water with 24, 28 and 35 kW power. Designed to offer you excellence Whether you want to modernise your heating system or you are looking for a boiler for your new home, the advantages of Condens 7000i W are a guarantee: by choosing this boiler you ensure only the best from every point of view. Consumption only according to your needs Condens 7000i W automatically adjusts power and consumption to your actual needs for domestic comfort and hot water, reducing waste. Furthermore, the condensation technique allows you to exploit the heat of the exhaust gases, increasing the efficiency of the boiler. Control your system via the dedicated App Condens 7000i W is perfectly compatible, in the case of single-zone heating systems, with the Bosch CT100 digital thermostat. This refined and elegant thermostat allows you to adjust the heating based on your presence at home and allows you, thanks to the Bosch Control app, to control your boiler wherever you are and at any time. For you only the best The quality is Bosch Thanks to the use of top-quality components, such as the aluminum-silicon alloy heat exchanger designed, patented, built and guaranteed by Bosch, the long-term reliability of this boiler is a certainty you can always count on. Black or white A question of style Choosing it is a real pleasure Condens 7000i W is the perfect choice for those seeking beauty and innovation. The refined and attractive design, with a titanium tempered glass casing with rounded corners, available in white or black, is ideal for adapting to all domestic environments, even the most modern and sophisticated. This innovative material gives numerous advantages to your boiler: it is robust, unbreakable, easy to clean and does not show signs of aging. Thanks to its elegant and refined look, the boiler transforms into a real piece of furniture. Unique on the outside, perfect on the inside Innovative technology... not just aesthetics! Condens 7000i W is designed to simplify installation and maintenance operations to the utmost by specialized technical personnel. Once opened, Condens 7000i W will never cease to amaze you. Quick and easy installation Condens 7000i W includes a pre-installation plate as an accessory to facilitate assembly; it is also compatible with the connections of previous Junkers Bosch wall-mounted boiler models, so you can use existing hydraulic and gas connections and save time. Quick and easy maintenance The internal design of the Condens 7000i W allows easy access to all components, which are clearly recognisable at first glance. The industrial design of this boiler means that it is assembled in a modular and orderly manner, ensuring speed and precision in maintenance operations. 360-degree reliability Bosch carefully selects all components, focusing on quality. The electronics are developed by Bosch; the heart of the boiler, the aluminum-silicon alloy exchanger, is also developed, produced, certified and guaranteed directly by Bosch. The aluminum-silicon alloy resists temperature fluctuations, giving the exchanger qualities of lightness, strength, efficiency and silence. Adapts to every need The wide continuous modulation of the power of Condens 7000i W, with a range of up to 1:8, will satisfy all comfort and consumption needs. The wide modulation is allowed by the Venturi tube, an innovation that makes the boiler highly efficient. Furthermore, the choice between LPG and methane is simplified to minimize setting operations. Intuitive and fast programming The Condens 7000i W display, circular and backlit, allows for fast and intuitive programming thanks to the easily understandable menu. In addition, the integrated climate control further simplifies the commissioning of the boiler. Product Warranty : The warranty on this item is 24 months from the date of purchase.

Read more less

Overview GAS BOILER JUNKERS BOSCH mod. CONDENS 7000i GC7000iW 28 kW METHANE CONDENSING + FLUE KIT - WHITE - ErP Technical specifications For heating and domestic hot water production Heat and DHW energy efficiency class (ErP) Seasonal space heating energy efficiency ns % 93 Useful efficiency (Hi - 50/30 °C) % 100 Modulation range 1:8 Nox class 6 Net weight) kg 43 Dimensions (L x W x H) mm 350x440x840 SMOKE EXHAUST KIT INCLUDED IN THE PRICE! By Regional Resolution, only boilers with the NOx 6 characteristic can be installed in the Lombardy and Piedmont regions Main features CONDENS 7000i W Design and innovation love at first sight. Ask her for the best, she will give it to you. Aesthetics, innovation and savings. The new Condens 7000i W wall-hung gas condensing boiler has a refined and exclusive design, with a black or white titanium tempered glass shell, and a heart full of technological innovations. Simple to use, it guarantees you high savings and low consumption. Condens 7000i W is available in several versions to satisfy all your heating and hot water needs: heating only version (with power of 14 and 24 kW) and combined version to also produce domestic hot water (with power of 24, 28 and 35 kW). Designed to offer you excellence Whether you want to modernize your heating system or you are looking for a boiler for your new home, the advantages of Condens 7000i W are a guarantee: by choosing this boiler you can ensure only the best under every point of view. Consumption only according to your needs Condens 7000i W automatically adjusts power and consumption to your real domestic comfort and hot water needs, reducing waste. Furthermore, the condensing technique makes it possible to exploit the heat of the exhaust gases, increasing the efficiency of the boiler. Control your system via the dedicated App Condens 7000i W is perfectly compatible, in the case of single-zone heating systems, with the Bosch CT100 digital thermostat. This refined and elegant thermostat allows you to adjust the heating based on your presence in the house and allows you, thanks to the Bosch Control app*, to control your boiler wherever you are and at any time. Only the best for you: quality is Bosch Thanks to the use of top quality components, such as the aluminum-silicon alloy heat exchanger designed, patented, built and guaranteed by Bosch, the reliability of this boiler over time is a certainty you can always count on. White or Black: a question of style Choosing it is a real pleasure Condens 7000i W is the optimal choice for those looking for beauty and innovation. The refined and captivating design, with titanium tempered glass casing with rounded corners, available in the white or black version, is ideal for adapting to all domestic environments, even the most modern and sophisticated. This innovative material gives your boiler many advantages: it is robust, unbreakable, easy to clean and does not show signs of ageing. Thanks to the elegant and refined look, the boiler is transformed into a real piece of furniture. Condens 7000i W is designed to simplify installation and maintenance operations by specialized technical personnel as much as possible. Once opened, Condens 7000i W will never cease to amaze you. Quick and easy installation Condens 7000i W includes the pre-installation plate as an accessory to facilitate assembly; it is also compatible with the connections of the previous models of Junkers Bosch wall boilers, so as to be able to use the existing water and gas connections and save time. Quick and easy maintenance The internal design of the Condens 7000i W allows easy access to all components, which are clearly recognizable at first glance. The industrial design of this boiler means that it is assembled in a modular and orderly manner, guaranteeing speed and precision in maintenance operations. All-round reliability Bosch carefully selects all components, focusing on quality. The electronics are developed by Bosch; the heart of the boiler, the aluminum-silicon alloy exchanger, is also developed, produced, certified and guaranteed directly by Bosch. The aluminum-silicon alloy resists temperature swings, giving the exchanger qualities of lightness, sturdiness, efficiency and silence. It adapts to every need The wide continuous modulation of the power of Condens 7000i W, with a range up to 1:8, will make it possible to satisfy all comfort and consumption needs. The wide modulation is allowed by the Venturi tube, an innovation that makes the boiler highly efficient. Furthermore, the choice between LPG and methane is simplified to minimize setting operations. Intuitive and fast programming The circular and backlit display of Condens 7000i W allows fast and intuitive programming thanks to the easily understandable menu. Furthermore, the integrated climatic thermoregulation further simplifies the commissioning of the boiler. The ErP legislation and the new energy labels The future of heating systems Starting from 26 September 2015, in order to be placed on the market, heating and hot water production systems will have to comply with the ErP (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiency of the appliances, favoring their comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating and domestic hot water production. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding less performing technologies from the market. The energy label will be supplied by the manufacturer with the appliance and will represent a concrete help for the consumer, allowing him to learn more about the characteristics of the system, acquire greater awareness of the energy savings allowed and make the best choice of what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: o the former is supplied by the manufacturer together with the product for heating and/or domestic hot water production appliances or the second for systems composed of several elements. In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing the score attributed to each appliance to increase and increasing the energy class of the system: it is therefore the task of whoever makes/installs the system to supply the consumer the correct explanatory label. The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on home consumption, approximately 80% of which is due to heating and the production of hot water, and are already being incentivized at a tax level today. Junkers Bosch is already in line with the dictates of the ErP legislation, demonstrating the future orientation that has always distinguished the brand. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less