Magnetic Dirt Separator Under Boiler Rbm Mag-Net Compact Series 3892 3/4"

Compact Magnetic Dirt Remover Under Boiler RBM MAG-NET series 3892 3/4"

CONSTRUCTION FEATURES

• Cartridge holder body: Polyamide PA66 + 30% FV
• Filter cartridge: AISI 304
• Hydraulic seals: EPDM PEROX

Magnets:

• B (Tmax) / B (Tamb)* < 1% (where Tmax = 130°C, Tamb = 21°C)
• Tested according to IEC 60404-5 & ASTM A977 standards
• neodymium
• REN35 B= 11000/12000 Gauss

Attacks:

• System return: M 3/4'' Flat seat
• Boiler inlet: 3/4” swivel nut Flat seat
• UNI EN ISO 228

TECHNICAL FEATURES

• Compatible fluid: Water, water + glycol
• max pressure exercise: 3 Bars
• Working temperature: 0÷80°C
• Standard filter filtration degree: 800 µm

RBM mag-net

• Supercompact
• Interception system included
• High efficiency
• Eliminate impurities
• Fights corrosion
• Extends the life of the boiler
• It guarantees the efficiency of the system

DESCRIPTION OF THE OPERATING PRINCIPLE

Through its effective and constant action, the magnetic filter collects all the impurities present in the system, preventing them from circulating inside it, thus avoiding wear and damage to the rest of the system components, in particular circulators and heat exchangers. heat. Mag-net exerts a continuous protective action on the boiler

USE

It is recommended to install Mag-net on the return circuit, at the boiler inlet, to protect it from all the impurities present in the system, especially during the start-up phase. Thanks to its compact size, it can be used under the boiler, in systems for domestic use, where installation spaces are very limited and therefore a traditional dirt separator would not fit.

FILTRATION DEGREE

Mag-net removes magnetic and non-magnetic particles that can cause damage to the installation during the first day of operation. The continuous passage of the fluid through the filter during normal operation of the system in which it is installed gradually leads to the complete removal of dirt.

FILTRATION PRINCIPLE:

Through a fixed path, the fluid is forced to pass through the mesh of the filter cartridge (800 µm) and enter the filtration chamber.
In this filtration chamber through the simultaneous action of:

- filter cartridge (direct mechanical filtration)
- magnet
- design choices regarding the filtration chamber section the water full of debris undergoes a filtration treatment.

First of all, the sudden change in section (the filtration chamber has a larger diameter than the duct), slows down the motion of the fluid and consequently the entrainment speed of the particles suspended in it.

Larger particles are stopped directly by the mechanical filter. The magnet, placed inside a cylinder positioned in the center of the
filtration chamber, attracts all impurities with magnetic characteristics.

Incoming stream
Filter cartridge
Magnet
Filtration chamber
Outgoing stream

In this way all the magnetic (ferrous residues) and non-magnetic (algae, mud, sand, etc.) contaminants present in the system are retained in the filtration chamber. The standard stainless steel cartridge has been designed not to exert excessive resistance to the passage of the fluid (low pressure drops) and acts by direct mechanical filtration without affecting the operation of the heating/cooling system.

Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

• peso: 5.0 kg
• marca: RBM extension
• modello: 3892.05.50