ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : NIMBUS POCKET M NET 150 Product code : 3301876 Sensys HD as standard Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A+++ Heating External air temperature -7°C - Water temperature 30/35°C Nonimal thermal power: 11.00 kW Absorbed electrical power: 3.55 kW COP: 3.10 External air temperature 7°C - Water temperature 30/35°C Thermal power: 15.00 kW Absorbed electrical power: 3.19 kW COP: 4.70 External air temperature 7°C - Water temperature 40/45°C Thermal power: 9.90 kW Absorbed electrical power: 2.48 kW COP : 4.00 Cooling External air temperature 35°C - Water temperature 7°/12°C Nonimal cooling capacity: 11.00 kW Absorbed electrical power: 3.75 kW EER: 2.93 External air temperature 35°C - Water temperature 18°/23°C Nonimal cooling capacity: 12.50 kW Absorbed electrical power: 2.66 kW EER: 4.70 Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Installation data Plumber's Pipe Diameter: 1" inch Male Dimensions and weight Dimensions (WxHxD): 1016x1506x374 mm Empty weight: 124.0 kg Ariston Nimbus Pocket M Net heat pump Heat pump for hot, cold and domestic hot water functions High efficiency packaged inverter heat pump capable of heating and cooling the environment. Thanks to optimal energy management, maximum performance efficiency is guaranteed at any outside temperature. POCKET I do not include the hydraulic module for a space-saving as much as possible. Optimized performance The innovative Energy Manager technology manages the entire hardware and software system, ensuring stable performance at any external temperature and the lowest noise level in its category Total efficiency High levels of efficiency across the entire range for both heating and cooling functions. Already prepared for energy labeling A+++ for heating Built-in connectivity The Ariston NET App allows you to control the heating, cooling and hot water functions directly from your smartphone and provides 24-hour assistance 360° control Through the interface of the integrated Sensys NET system it is possible to effectively control multiple zones, also integrating renewable solar energy, both thermal and photovoltaic, and auxiliary generators Quality 100% GUARANTEED BY ARISTON Every single component is developed with the aim of guaranteeing long-lasting performance and high efficiency, with the guarantee of the Ariston brand. 100% CHECKED AND TESTED Every single Ariston product is rigorously tested in terms of quality, efficiency and safety before being delivered, with superior results guaranteed by our commitment. 100% BUILT TO LAST Strong and super resistant materials, components and products developed to perform in extreme conditions to deliver high-level results with maximum durability Totally safe Designed with the most modern technology and built with selected materials, Ariston heat pumps are totally safe Advantages Inverter packaged heat pump R32 ecological gas COP up to 5.1 Quietness, up to 53 dB(A) Power range from 1.7 to 17.7 kW Sensys HD as standard Light Box electrical box that can also be installed outdoors Plug & Play solution Back up electrical resistance available as an accessory WI-FI connectivity as standard Remote management with the Ariston NET app Optional 24/7 teleassistance Photovoltaic function Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS   FREE FIRST START-UP Technical features Model : HYDRO UNIT M 012T Product code : 20191958 Optional REC10MH control Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating COP with water set at 35°C: 4.95 Heating COP with water set at 45°C: 3.70 Heating COP with water set at 55°C: 3.05 EER cooling with water set at 7°C: 3.95 EER cooling with water set at 18°C: 2.75 Performance   Heating Useful power in heating with water set at 35° C: 12.10 kW Useful power in heating with water set at 45° C: 12.30 kW Useful power in heating with water set at 55° C: 11.90 kW Cooling down Useful power in cooling with water set at 7 °C: 11.50 kW Useful power in cooling with water set at 18 °C: 12.0 kW Sound data Sound power : 65 dB(A) Sound pressure : 53 dB(A) Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Dimensions and weight Dimensions (LxHxP): 1385x945x526 mm Empty weight: 160.0 Kg Beretta HYDRO UNIT M Inverter Monoblock Air-Water Hydronic Heat Pumps These units are used for both heating and cooling applications as well as domestic hot water tanks. They can be combined with fan coil units, underfloor heating applications, low temperature high efficiency radiators, domestic hot water tanks and solar kits, all of which are field powered. A wired controller is supplied with the unit. The backup heater, available as an accessory, can increase the heating capacity in cold outside temperatures. The backup heater also serves as a backup in the event of a malfunction and as a freeze protection of the outdoor water pipes during the winter. Efficiency and sustainability The heat pumps of the HYDRO UNIT M series use R32 as the refrigerant gas, a gas with a lower Global Warming Potential than the traditional gases used. The design of a new sealed circuit for fluorinated gases, the use of R32, reduced load volumes, lower CO2 emissions and increased energy efficiency are the characteristics that differentiate HYDRO UNIT M and increase its sustainability environmental. Quietness The low noise level is guaranteed by the construction features used and can be further reduced thanks to the silent mode programming, available to the customer Antifreeze function The HYDRO UNIT M heat pump is foreseen for outdoor installation and equipped with the ANTIFREEZE function for the protection of the entire hydraulic circuit. This customer-programmable function activates automatically whenever the water temperature in the system drops below a pre-set value, ensuring the protection of the entire system Better performance The ten models available offer powers from 4 kW to 16 kW , with fast response to requests and reduced energy consumption which guarantee energy class A+++ up to 35°C and A++ up to 55°C HP KEYMARK Certified The design meets the requirements of the voluntary European HP KEYMARK certification Easy and flexible Installing HYDRO UNIT M is easy thanks to the hydronic kit that comes with the monobloc and which contains all the essential components. HYDRO UNIT M is flexible thanks to its ability to respond quickly to the real needs of the environments to be served Functional elements Beretta Hydro Unit M Inverter Control Board Maximizes power under critical load conditions and provides stability and efficiency at part loads AISI 316 steel plate heat exchanger : protected with closed cell anti-condensation insulation, it offers high heat exchange efficiency Control board Operating parameters constantly analyzes the ambient temperature and the water temperature to activate the different components and meet the demand Hydronic module Including low consumption circulator, expansion vessel, automatic vent valve and safety valve Electronic expansion valve Optimizes the flow of the refrigerant fluid in every situation Twin rotary compressor Inverter System design including DC twin rotary compressor, fan motor and pump ensures precise motor speed control for the right power needed to perfectly match actual load and save energy Fan Special design of the blade and its edge that allows optimizing the flow surface, improving efficiency and reducing fan noise Heat exchange coil With extended surface and aluminum fins Install more Hydro Unit M HYDRO UNIT M offers the possibility of connecting up to six units to each other for the heating, cooling and domestic hot water needs of small condominiums and light commercial contexts. Each of the units responds individually to the demands of the environment in which it is installed Easily manage the plant Advanced remote control This module, present in every HYDRO UNIT M installation, has a multilingual display and allows you to: Manage up to six units connected in cascade Activate the programmed functions such as the Antifreeze function and the Vacation function, for the serenity of the family REC10MH management module Designed for full-electric and hybrid applications, this module is installed inside the home and allows the user to easily manage the entire system. If the system is equipped with a Hybrid distribution system, REC10MH allows you to manage the multi-zone system to optimize the operation of the system. The module is equipped with a color display and a multilingual menu USB Each HYDRO UNIT M is equipped with a USB port to connect the USB flash memory to update the unit firmware Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : Magis Combo 6 V2 Product code : 3.030611 Energy efficiency Heating efficiency class at 35° C : A+++ Heating efficiency class at 55° C : A++ Sanitary energy efficiency class: A Load profile : XL Heating COP with water set at 35 °C: 4.92 Heating COP with water set at 45 °C: 3.58 Heating COP with water set at 55 °C: 2.65 EER cooling with water set at 7 °C : 3.26 EER cooling with water set at 18 °C : 4.42 Performance   Heating Useful power in heating with water set at 35° C: 6.00 kW Useful power in heating with water set at 45° C: 5.40 kW Useful power in heating with water set at 55° C: 4.80 kW Heating temperature range : 20° ~ 65° C Cooling down Useful power in cooling with water set at 7 °C: 4.70 kW Useful power in cooling with water set at 18 °C: 6.50 kW Cooling temperature range : 5 ~ 25°C Technical data of the indoor condensing unit Power absorbed by the heat generator circulator: 60 W Power absorbed by the heat pump circulator: 52 W Maximum nominal heat input in DHW: 28.1 kW Maximum nominal heat input in heating mode: 24.9 kW Minimum nominal heat input: 5.1 kW Maximum useful thermal power in DHW: 27.3 kW Maximum useful thermal power in heating: 24.0 kW Minimum useful thermal power: 4.8 kW Heating temperature range : 20° ~ 80° C NOX class : 6 Specific flow rate in continuous domestic hot water service (∆t 30 °C): 13.1 l/min System expansion vessel: 8.3 litres Hydronic circuit maximum operating pressure: 3 bar Water content : 2.8 litres Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operating range - Cooling: -10° ~ 46°C - Heating: -25° ~ 35° C - DHW : -25° ~ 43° C Installation data Liquid piping diameter : 6.35 mm (¼”) Gas pipe diameter : 15.88 mm (5⁄8") Dimensions and weight External unit dimensions (WxHxD): 940x998x384 mm Weight of the outdoor unit when empty: 46.5 Kg Internal unit dimensions (WxHxD): 440x787x400 mm Weight of the internal unit when empty: 55.8 Kg Heat pump Reversible split hybrid heat pump Immergas MAGIS COMBO V2 Heat and condensing pump: the intelligence and efficiency of the hybrid The stringent regulations on new homes and major renovations push towards advanced forms of air conditioning with a view to reducing consumption, environmental impact and harmful emissions . The range of IMMERGAS heat pumps is designed to provide great comfort by creating electric systems for heating, cooling and domestic hot water production MAGIS COMBO V2 is the " factory made " hybrid solution by Immergas, designed and assembled directly in the factory in Brescello di Reggio Emilia, which heats, cools and produces hot water. Consisting of an outdoor unit and an indoor condensing unit for the highest requirements, it is available in various powers, from 4 to 16 kW. MAGIS COMBO V2 instant version The series connection to the separate storage tank also makes it possible to integrate solar thermal for the production of hot water. The DHW inlet probe is optional. The instantaneous version represents the ideal solution for replacing old generators even on systems with temperatures up to 80 °C. The internal unit of the MAGIS COMBO V2 consists of a condensing generator and an integrated hydronic module for the exchange of energy between the cooling circuit and the water circuit of the system. While the outdoor unit is available in single-phase version for 4, 6 and 9 kW models with R32 refrigerant gas and in single-phase and three-phase 12, 14 and 16 kW version with R410A refrigerant gas. The range from 4 to 14 kW is in class A+++ . MAGIS COMBO V2 can be installed in confined spaces both recessed and indoors. Solutions for new homes MAGIS COMBO V2 expands the Immergas offer of "split" solutions, born with MAGIS PRO V2, which must be installed by qualified professionals with an F-GAS license for the refrigerant connections between the 2 units. It is ideal for obtaining very high energy classes in new residential buildings. Compact and built-in solution The generators are very well integrated to give advantages from an installation point of view and reduce overall dimensions. MAGIS COMBO PLUS V2, using the necessary accessories, can also be inserted inside the SOLAR CONTAINER COMBO recessed frame or combined with the new SUPER TRIO and SUPER TRIO TOP system both in the indoor frame and in an internal room in a dedicated technical cabinet. Less aesthetic impact The outdoor unit is smaller than a normal hydronic heat pump, allowing for flexibility of placement outside the home or on a balcony. Indoor unit New R32/water exchanger with 72 plates Stainless steel condensing module System expansion vessel 10 litres Flowmeter to enable the operation of the refrigerant circuit only in the presence of sufficient circulation in the system 7 m ac system circulator associated with the operation of the refrigerant circuit (which in the PLUS version can also manage the domestic hot water) 7 m ac system circulator associated with the operation of the internal condensing unit New electronics designed to directly manage 3 zones, one direct and two mixed Standard shut-off valves and ¾” filter Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS FREE FIRST START-UP Technical features Model : Magis M16 Product code : 3.032377 Built-in Wi-Fi Energy efficiency Energy class in heating at 35° C: A+++ Energy class in heating at 55° C: A++ Heating COP with water set at 35 °C: 4.50 Heating COP with water set at 45 °C: 3.50 Heating COP with water set at 55 °C: 2.85 EER cooling with water set at 7 °C : 2.50 EER cooling with water set at 18 °C: 3.61 Performance   Heating Useful power in heating with water set at 35° C: 15.90 kW Useful power in heating with water set at 45° C: 16.00 kW Useful power in heating with water set at 55° C: 16.00 kW Heating temperature range : 12° ~ 65° C Cooling down Useful power in cooling with water set at 7 °C: 14.00 kW Useful power in cooling with water set at 18 °C: 14.20 kW Cooling temperature range : 5 ~ 25°C Temperature range in DHW : 12 ~ 65°C Technical data Hydronic circuit maximum operating pressure: 3 bar Maximum absorbed power: 6200 W System expansion tank: 8 litres Rated Operating Current: 27A Electrical protection degree of the appliance: IP 24 Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operating range - Cooling: -5° ~ 43° C - Heating: -25° ~ 35° C - DHW : -25° ~ 43° C Installation data Delivery pipe diameter: 1 ¼” M Return pipe diameter: 1 ¼” M Dimensions and weight Dimensions (WxHxD): 1385x865x526 mm Weight : 129Kg Immergas MAGIS M heat pump Clean and safe energy for heating and cooling The stringent regulations on new homes and major renovations push towards advanced forms of air conditioning with a view to reducing consumption, environmental impact and harmful emissions . The range of IMMERGAS heat pumps is designed to provide great comfort by creating electric systems for heating, cooling and domestic hot water production MAGIS M Packaged hydronic air-water heat pump the new air/water hydronic packaged heat pump, hermetically sealed, characterized by ease of installation and the possibility of creating coils up to 180 kW New range The new range of MAGIS M hydronic heat pumps includes 13 versions. Powers from 4 kW to 30 kW are available. All models can operate independently or in combination with IMMERGAS condensing boilers with the help of the system manager. It is also possible to make batteries up to 180kW. The 4 to 12 kW versions can be combined with the MAGIS VICTRIX ErP and MAGIS HERCULES ErP hybrid systems. Simplified installation Pre-charged with low GWP R32 ecological refrigerant and hermetically sealed , the MAGIS M packaged hydronic heat pumps do not require an F-gas license for installation, thus simplifying connections and commissioning. Lower energy consumption and high silence The new MAGIS M heat pumps feature the highest A+++ energy classes on all models from 4 to 26 kW, guaranteeing very low electrical absorption and energy consumption . The "inverter" technology further reduces consumption by increasing the performance of the machines, especially in mid-season when the heat requirement is reduced. The single fan in the residential sizes, up to the 16 kW model, the Silent Mode function provide benefits in terms of noise reduction Stand Alone Applications MAGIS M can be applied in stand-alone systems thanks to the standard control panel which allows configuration and monitoring of correct machine operation, self-diagnosis, management of 2 system circuits and a DHW circuit, the anti-legionella function, management recirculation pump, solar thermal system, photovoltaic contact, control of any DHW or system integrative electric heaters, also acting as a room chronothermostat for a system area Applications with system manager The use of the System Manager with MAGIS M allows you to create more elaborate system configurations or with more than 2 zones, also implementing the functions. For example, it is possible to manage integrated systems with a boiler, control a solar thermal system with a specific boiler probe, install batteries for up to 4 devices with sequential operation of the machines Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS COMMISSIONING INCLUDED Heating Water 35/30°C Outdoor air 7°C Capacity : 14.5 / 15.5 kW COP 4.60 Cooling Water 18/23°C Outdoor air 35°C Capacity : 13.5 / 15.3 EER: 3.61 Energy efficiency Heating with medium delivery water temperature at 55°C energy class: A++ ηs : 135% SCOP - 3.47 Heating with medium delivery water temperature at 35°C SCOP - 4.72 ηs : 186% Energy class: A+++ Technical characteristics: Power Supply Voltage/Frequency/Phases V/Hz/n° 230/50/1 Water flow rate Water 35/30°C External air 7°C Nominal l/s 0.69 Expansion tank capacity l 4.8 Sound power Minimum / Nominal dB(A) 59/65 Sound pressure @1m Minimum / Nominal dB(A) 44/50 Operating field Water delivery temperature Heating / DHW Full electric Minimum / Maximum °C 25 / 65 Hybrid Minimum / Maximum °C 25 / 75 Cooling - Minimum / Maximum °C 5 / 25 Operating range (outdoor air) - Heating / DHW - Minimum / Maximum °C -25 / 43 -Cooling - Minimum / Maximum °C -5 / 43 Dimensions and weight Dimensions WxHxD mm 1.385x864x523 mm Net weight : 129 Kg R-32 EDGE EVO 2.0 Monoblock Air-Water Heat Pump - EXC Hybrid or full electric packaged heat pump , compact, efficient and extremely silent. Perfect for new systems or updating existing ones, with the possibility of managing up to 6 units in cascade and optimizing the energy produced by a thermodynamic or photovoltaic solar system. ✓ Space-saving: installed outdoors, requires no internal drive ✓ Designed for harsh climates: excellent performance at low temperatures and optional auxiliary heaters from 3 to 9 kW ✓ Simultaneous production of DHW and cooling / heating (Hybrid version) ✓ Modular: combine up to 6 units in cascade for powers up to 180 kW ✓ Advanced connectivity: management via dedicated MSmartHome App or via Modbus port with CONTROL4 NRG included as standard Thoughtless Edge EVO 2.0 - EXC in Hybrid version is the solution designed to update old generators without having to modify the system. The system is in fact extremely versatile and is able to adapt to what already exists: it simply replaces the generator that produces Heating and Domestic Hot Water, improving comfort and efficiency, but without much thought. ENERGY SAVING DHW solar integration (DHW tank - optional) Waterfall Smart Grid ready €-Switch COMFORT Hot Cold AC extension Silent MANAGEMENT AND CONNECTIVITY ON/OFF inputs Keymarks Clivet Eye monitoring Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS COMMISSIONING INCLUDED Heating Water 35/30°C Outdoor air 7°C Capacity : 4.20 / 5.33 6 kW COP 5.10 Cooling Water 18/23°C Outdoor air 35°C Capacity : 4.50 / 7.65 6 EER: 5.50 Energy efficiency Heating with medium delivery water temperature at 55°C SCOP : A++ ηs : 129% SCOP - 3.31 Heating with medium delivery water temperature at 35°C SCOP - 4.85 ηs : 191% Energy class: A+++ Technical features: Power Supply Voltage/Frequency/Phases V/Hz/n° 230/50/1 Water flow rate Water 35/30°C Outside air 7°C Nominal l/s 0.20 Expansion tank capacity l 4.8 Sound power Minimum / Nominal dB(A) 53 / 55 Sound pressure @1m Minimum / Nominal dB(A) 39 / 44 Operating field Water delivery temperature Heating / DHW Full electric Minimum / Maximum °C 25 / 65 Hybrid Minimum / Maximum °C 25 / 75 Cooling - Minimum / Maximum °C 5 / 25 Operating range (outdoor air) - Heating / DHW - Minimum / Maximum °C -25 / 43 -Cooling - Minimum / Maximum °C -5 / 43 Dimensions and weight Dimensions WxHxD mm 1.295x717x426 mm Net weight : 86 Kg R-32 EDGE EVO 2.0 Monoblock Air-Water Heat Pump - EXC Hybrid or full electric packaged heat pump , compact, efficient and extremely silent. Perfect for new systems or updating existing ones, with the possibility of managing up to 6 units in cascade and optimizing the energy produced by a thermodynamic or photovoltaic solar system. ✓ Space-saving: installed outdoors, requires no internal drive ✓ Designed for harsh climates: excellent performance at low temperatures and optional auxiliary heaters from 3 to 9 kW ✓ Simultaneous production of DHW and cooling / heating (Hybrid version) ✓ Modular: combine up to 6 units in cascade for powers up to 180 kW ✓ Advanced connectivity: management via dedicated MSmartHome App or via Modbus port with CONTROL4 NRG included as standard Thoughtless Edge EVO 2.0 - EXC in Hybrid version is the solution designed to update old generators without having to modify the system. The system is in fact extremely versatile and is able to adapt to what already exists: it simply replaces the generator that produces Heating and Domestic Hot Water, improving comfort and efficiency, but without much thought. ENERGY SAVING DHW solar integration (DHW tank - optional) Waterfall Smart Grid ready €-Switch COMFORT Hot Cold AC extension Silent MANAGEMENT AND CONNECTIVITY ON/OFF inputs Keymarks Clivet Eye monitoring Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

OFFER VALID UNTIL STOCKS LAST Technical features Model : AUDAX 18 Code 3.025563 Energy efficiency COP 4.40 EER 4.35 Energy efficiency class: A+ / A+ Performance Useful heating power: 17.14 kW Useful cooling power: 19.83 kW Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R410A Dimensions and weight Dimensions (HxWxD): 1579x1109x584 Weight : 199.0 Kg Immergas AUDAX inverter air-water heat pump The large range of Immergas heat pumps is designed to create integrated or hybrid systems that use renewable energies to offer great comfort, reduce consumption and harmful emissions, comply with the new standards. With the addition of photovoltaic panels, especially useful for heat pump only systems, even greater advantages are obtained. For this reason, all Immergas products are equipped with a photovoltaic contact and make the most of the sun's energy in heating and cooling (with split and monobloc versions) and in water heaters that only produce domestic hot water. AUDAX is the name of the air/water monobloc versions indicated for all system solutions: 4 are the single-phase versions, for homes, of 6, 8, 12 and 16, and 3 are the three-phase versions, for commercial environments and offices, of 16, 18 and 21 kW. Low consumption: thanks to inverter technology , electricity consumption decreases and performance remains high in favor of greater domestic comfort. Storage tank: in combination with a separate storage unit it can produce domestic hot water. Silent operation: low sound impact thanks to special technical solutions. Standard control panel: allows management of the heat pump from any room in the home. High seasonal yields: ideal for air conditioning environments both in winter heating (maximum temperature 60 °C) and in summer cooling (in combination with fan coils or radiant panels combined with dehumidifier). Formula Comfort HYBRID: makes use of the most complete maintenance program which allows the conventional guarantee to be extended to 5 years which, in collaboration with the Immergas Authorized Assistance Centre, can be activated during the initial check. Eco-friendly technology: uses the outside air as a source of renewable energy. Renewable energies: combinable with hybrid and integrated systems for systems of great domestic comfort , it satisfies the new regulatory requirements. Versatile: it can work individually, in combination with integrated systems with boiler or in series for solutions in centralized systems. Positioning: Approved for outdoor, open-air operation. IPX4 electrical protection. Simple user interface The control panel, supplied as standard, in addition to displaying the operating diagnostics, also acts as a weekly thermostat for heating/cooling management with room temperature/humidity sensor function in stand-alone applications. Easy to connect, two BUS-type cables are sufficient which allow the exchange of information and two cables for the power supply to be connected to the AUDAX and, therefore, it does not require power batteries. The control panel allows you to: Program comfort/economy room temperature Set time slots and climatic curve in both heating and cooling View heat pump error codes Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS OPTIONAL STARTER TO BE PURCHASED SEPARATELY! Technical features Model : i-BX-N013T Article code : 401478 Command on board included Cooling down External air temperature 35°C - Water temperature 7°C Cooling capacity: 12.8 kW Absorbed electrical power: 4.54 kW EER: 2.82 ESEER: 4.49 Values ​​referred to the EN14511 standard External air temperature 35°C - Water temperature 7°C Cooling capacity: 12.8 kW EER: 2.84 ESEER: 4.58 Class : C Heating External air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 14.7 kW Absorbed electrical power: 4.55 kW COP: 3.23 Values ​​referred to the EN14511 standard External air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 14.7 kW COP: 3.24 Class : A Energy efficiency in cooling SEER : 4.65 Efficiency ηs : 183 % Energy efficiency in low temperature heating PDesign : 10.9 kW SCOP : 3.99 Efficiency ηs : 157 % Seasonal efficiency class: A++ Energy efficiency in medium temperature heating PDesign : 11.42 kW SCOP: 3.01 Efficiency ηs : 117 % Seasonal efficiency class : A+ Performance Cooling down Exchanger water flow rate: 0.61 m 3 /h Available pump head: 53 kPa Sound power level : 70 dB(A) Sound pressure : 55 dB(A) Heating Exchanger water flow rate: 0.71 m 3 /h Available pump head: 47.1 kPa Sound power level : 70 dB(A) Sound pressure : 55 dB(A) Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R-410 Operating limits Heating External air temperature : -20°C ~ 45°C Introduced water temperature : 24°C~ 60°C Cooling down External air temperature : -10°C ~ 46°C Introduced water temperature : -8°C ~ 20°C Dimensions and weight Dimensions (LxWxH): 900x420x1390 mm Empty weight: 135.0 kg Climaveneta reversible heat pumps from 4.2 to 35.1 kW Perfect comfort and maximum efficiency Outdoor unit capable of heating, cooling and domestic hot water production with hermetic rotary compressors driven by variable speed motors in single circuit configuration using R410A refrigerant, air side exchange coil with copper pipes and aluminum fins, water side heat exchanger with brazed plates. The unit is equipped with an electronic expansion valve and built-in hydronic module as standard. Flexible and reliable machine that adapts to the most diverse load conditions thanks to the accurate thermoregulation combined with the use of inverter technology. The accurate design and the use of innovative variable speed motors (inverters) ensure a high level of energy efficiency both at full and partial load. The heat pump for every need System efficiency The unit is designed with a system approach: all components are regulated synergistically according to proprietary logics to maximize unit efficiency. High efficiency at partial loads High seasonal efficiency values, thanks to the modulation of the compressor with DC inverter technology which guarantees the exact energy in correspondence with the real needs of the building. High efficiency which translates into reduced energy consumption throughout the unit's working period. Comfort applications Residential buildings Business premises Infrastructure for entertainment Executive offices Hotels and Resorts Health facilities Centralized systems that can be created with cascade systems ErP Ready i-BX-N thanks to the inverter technology complies with the ErP directive, exceeding the minimum requirements for seasonal energy efficiency in heating, SCOP, both for low temperature and medium temperature applications Silent operation : Noise emissions are reduced thanks to the modulation of the frequency of the compressor and the speed of the fan Reduced consumption : The dynamic control of the water delivery temperature according to the outside air temperature greatly increases the comfort and energy efficiency of the system Domestic hot water : The production of domestic hot water is guaranteed all year round. The controller manages hot water production via a 3-way valve to be installed outside the unit Ease of installation : The i-BX-N heat pumps are of the "packaged" monobloc type which are particularly simple to install. The hydraulic components are all contained inside the unit and the connection pipes are of the hydraulic type, therefore it is not necessary to carry out the typical procedures of direct expansion air conditioning systems Intelligent management of your system Nadisystem guarantees centralized regulation of the system, ensuring: Easy communication between the different components Simplified installation Reduced number of checks Integration between different sources Nadisystem integrates different energy sources based on the availability, yields and costs of their use, always preferring renewable sources. The auxiliary sources are activated to meet the building's needs at low outside temperatures by integrating the thermal power of the heat pump System customization Nadisystem has various special functions that allow you to customize the system for every need. The controller is able to regulate two zones in both heating and cooling and with different flow temperatures, making the i-BX-N heat pump compatible with different types of system with different water temperature levels. Cascade management of units If the heat requirements are high, it is possible to connect up to 4 units of the same power, optional configuration. The cascade configuration is managed in master/slave mode, with the master unit managing the information and transmitting it to the slave units. Structure Structure consisting of a base and self-supporting panels in hot-dip galvanized steel, painted with RAL 7035 polyester powders. Solidity and robustness Maximum accessibility for service and maintenance operations Fans Axial fans with stepless speed regulation that improve the air distribution obtaining low consumption and minimizing the sound level Drums Condenser with copper tubes and aluminum fins Standard coil protection grids up to size 015 Control Keyboard with LCD display and electronic adjustment via menu NADI Compact Functional keys Graphic display and icons allow quick and easy consultation and intervention on the unit by means of a multi-level menu NADISYSTEM control Setting of the water set point with fixed or dynamic value with Climatic Curve. Antifreeze protection according to water temperature and outside air temperature. Domestic hot water production. 4 Management of external auxiliary sources. Two zones with different water temperature distribution Digital input for night function (Night mode). Remote connectivity to BMS systems via serial card (accessory). Cascade system management If the heat requirements are high, it is possible to connect up to 4 units of the same power in cascade Managed in master-slave mode, with the master unit in charge of processing the information and then transmitting it to the slave units High degree of partialisation of the supplied power, without reducing performance, and precise sizing of the system Possibility of dedicating just one or all the units to the production of domestic hot water. Integrated hydronic unit All plumbing components for installation are already included with no increase in unit size. EC pump, brushless motor with electronic switching to guarantee low consumption and high system efficiency Flow switch, to protect the exchanger for low water flow rates Safety valve. Expansion vessel. Air vent valve. Mesh filter, unassembled but supplied with the unit Evaporator Brazed plate heat exchanger in AISI 316 steel, externally lined with anti-condensation mat in closed cell neoprene (CFC and HCFC-free). Thermostatic electric resistance to protect against the formation of ice inside. Low pressure drops and optimized heat exchange Refrigerant circuit Standard electronic expansion valve Optimized coolant flow Precise and effective temperature control Fast regulation and high efficiency Compressor Mitsubishi Electric compressors, synonymous with quality, reliability and performance at partial loads. Compressor installed on rubber anti-vibration supports and acoustically isolated by special sound-absorbing material. Special antifreeze function Dedicated algorithms avoid the formation of ice inside by managing the operation Of the electrical resistance on the plate heat exchanger. Of the pump according to the outside air temperature. Of the flow switch in case of no flow The unit is also set up to operate, with brine mixtures, down to an exchanger outlet temperature of -8°C. Accessories Remote keyboard Wired room terminal with backlit display, complete with temperature and humidity probe Cascade unit management kit Domestic hot water tank probe and inertial tank probe Copper-Aluminium type batteries with epoxy painting Copper-Copper type batteries Hydraulic separator Domestic hot water storage Antifreeze electric heater on base and for auxiliary condensate drain pan RS485 serial card for ModBus protocol Rubber base anti-vibration mounts Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS OPTIONAL STARTER TO BE PURCHASED SEPARATELY! Technical features Model : i-BX-N013M Article code : 401476 Command on board included Cooling down External air temperature 35°C - Water temperature 7°C Cooling power: 12.4 kW Absorbed electrical power: 4.54 kW EER: 2.73 ESEER: 4.24 Values ​​referred to the EN14511 standard External air temperature 35°C - Water temperature 7°C Cooling power: 12.4 kW EER: 2.75 ESEER: 4.37 Class : C Heating External air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 14.3 kW Absorbed electrical power: 4.53 kW COP: 3.16 Values ​​referred to the EN14511 standard External air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 14.3 kW COP: 3.19 Class : B Energy efficiency in cooling SEER : 4.33 Efficiency ηs : 170 % Energy efficiency in low temperature heating PDesign : 10.4 kW SCOP: 3.81 Efficiency ηs : 149 % Seasonal efficiency class : A+ Energy efficiency in medium temperature heating PDesign : 10.61 kW SCOP: 2.93 Efficiency ηs : 114 % Seasonal efficiency class : A+ Performance Cooling down Exchanger water flow rate: 0.59 m 3 /h Available pump head: 56.6 kPa Sound power level : 70 dB(A) Sound pressure : 55 dB(A) Heating Exchanger water flow rate: 0.69 m 3 /h Available pump head: 51.1 kPa Sound power level : 70 dB(A) Sound pressure : 55 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R-410 Operating limits Heating External air temperature : -20°C ~ 45°C Introduced water temperature : 24°C~ 60°C Cooling down External air temperature : -10°C ~ 46°C Introduced water temperature : -8°C ~ 20°C Dimensions and weight Dimensions (LxWxH): 900x420x1390 mm Empty weight: 135.0 kg Climaveneta reversible heat pumps from 4.2 to 35.1 kW Perfect comfort and maximum efficiency Outdoor unit capable of heating, cooling and domestic hot water production with hermetic rotary compressors driven by variable speed motors in single circuit configuration using R410A refrigerant, air side exchange coil with copper pipes and aluminum fins, water side heat exchanger with brazed plates. The unit is equipped with an electronic expansion valve and built-in hydronic module as standard. Flexible and reliable machine that adapts to the most diverse load conditions thanks to the accurate thermoregulation combined with the use of inverter technology. The accurate design and the use of innovative variable speed motors (inverters) ensure a high level of energy efficiency both at full and partial load. The heat pump for every need System efficiency The unit is designed with a system approach: all components are regulated synergistically according to proprietary logics to maximize unit efficiency. High efficiency at partial loads High seasonal efficiency values, thanks to the modulation of the compressor with DC inverter technology which guarantees the exact energy in correspondence with the real needs of the building. High efficiency which translates into reduced energy consumption throughout the unit's working period. Comfort applications Residential buildings Business premises Infrastructure for entertainment Executive offices Hotels and Resorts Health facilities Centralized systems that can be created with cascade systems ErP Ready i-BX-N thanks to the inverter technology complies with the ErP directive, exceeding the minimum requirements for seasonal energy efficiency in heating, SCOP, both for low temperature and medium temperature applications Silent operation : Noise emissions are reduced thanks to the modulation of the frequency of the compressor and the speed of the fan Reduced consumption : The dynamic control of the water delivery temperature according to the outside air temperature greatly increases the comfort and energy efficiency of the system Domestic hot water : The production of domestic hot water is guaranteed all year round. The controller manages hot water production via a 3-way valve to be installed outside the unit Ease of installation : The i-BX-N heat pumps are of the "packaged" monobloc type which are particularly simple to install. The hydraulic components are all contained inside the unit and the connection pipes are of the hydraulic type, therefore it is not necessary to carry out the typical procedures of direct expansion air conditioning systems Intelligent management of your system Nadisystem guarantees centralized regulation of the system, ensuring: Easy communication between the different components Simplified installation Reduced number of checks Integration between different sources Nadisystem integrates different energy sources based on the availability, yields and costs of their use, always preferring renewable sources. The auxiliary sources are activated to meet the building's needs at low outside temperatures by integrating the thermal power of the heat pump System customization Nadisystem has various special functions that allow you to customize the system for every need. The controller is able to regulate two zones in both heating and cooling and with different flow temperatures, making the i-BX-N heat pump compatible with different types of system with different water temperature levels. Cascade management of units If the heat requirements are high, it is possible to connect up to 4 units of the same power, optional configuration. The cascade configuration is managed in master/slave mode, with the master unit managing the information and transmitting it to the slave units. Structure Structure consisting of a base and self-supporting panels in hot-dip galvanized steel, painted with RAL 7035 polyester powders. Solidity and robustness Maximum accessibility for service and maintenance operations Fans Axial fans with stepless speed regulation that improve the air distribution obtaining low consumption and minimizing the sound level Drums Condenser with copper tubes and aluminum fins Standard coil protection grids up to size 015 Control Keyboard with LCD display and electronic adjustment via menu NADI Compact Functional keys Graphic display and icons allow quick and easy consultation and intervention on the unit by means of a multi-level menu NADISYSTEM control Setting of the water set point with fixed or dynamic value with Climatic Curve. Antifreeze protection according to water temperature and outside air temperature. Domestic hot water production. 4 Management of external auxiliary sources. Two zones with different water temperature distribution Digital input for night function (Night mode). Remote connectivity to BMS systems via serial card (accessory). Cascade system management If the heat requirements are high, it is possible to connect up to 4 units of the same power in cascade Managed in master-slave mode, with the master unit in charge of processing the information and then transmitting it to the slave units High degree of partialisation of the supplied power, without reducing performance, and precise sizing of the system Possibility of dedicating just one or all the units to the production of domestic hot water. Integrated hydronic unit All plumbing components for installation are already included with no increase in unit size. EC pump, brushless motor with electronic switching to guarantee low consumption and high system efficiency Flow switch, to protect the exchanger for low water flow rates Safety valve. Expansion tank. Air vent valve. Mesh filter, unassembled but supplied with the unit Evaporator Brazed plate heat exchanger in AISI 316 steel, externally lined with anti-condensation mat in closed cell neoprene (CFC and HCFC-free). Thermostatic electric resistance to protect against the formation of ice inside. Low pressure drops and optimized heat exchange Refrigerant circuit Standard electronic expansion valve Optimized coolant flow Precise and effective temperature control Fast regulation and high efficiency Compressor Mitsubishi Electric compressors, synonymous with quality, reliability and performance at partial loads. Compressor installed on rubber anti-vibration supports and acoustically isolated by special sound-absorbing material. Special antifreeze function Dedicated algorithms avoid the formation of ice inside by managing the operation Of the electrical resistance on the plate heat exchanger. Of the pump according to the outside air temperature. Of the flow switch in case of no flow The unit is also set up to operate, with brine mixtures, down to an exchanger outlet temperature of -8°C. Accessories Remote keyboard Wired room terminal with backlit display, complete with temperature and humidity probe Cascade unit management kit Domestic hot water tank probe and inertial tank probe Copper-Aluminium type batteries with epoxy painting Copper-Copper type batteries Hydraulic separator Domestic hot water storage Antifreeze electric heater on base and for auxiliary condensate drain pan RS485 serial card for ModBus protocol Rubber base anti-vibration mounts Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS OPTIONAL STARTER TO BE PURCHASED SEPARATELY! Technical features Model : i-BX-N008M Article number : 401474 Command on board included Cooling down External air temperature 35°C - Water temperature 7°C Cooling power: 7.5 kW Absorbed electrical power: 2.72 kW EER: 2.76 ESEER: 4.45 Values ​​referred to the EN14511 standard External air temperature 35°C - Water temperature 7°C Cooling power: 5.9 kW EER: 2.81 ESEER: 4.83 Class : C Heating External air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 8.51 kW Absorbed electrical power: 2.65 kW COP: 3.21 Values ​​referred to the EN14511 standard External air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 8.5 kW COP: 3.26 Class : A Energy efficiency in cooling SEER: 4.71 Efficiency ηs : 185 % Energy efficiency in low temperature heating PDesign : 6.02 kW SCOP : 4.15 Efficiency ηs : 163 % Seasonal efficiency class: A++ Energy efficiency in medium temperature heating PDesign : 7.02 kW SCOP: 3.23 Efficiency ηs : 126 % Seasonal efficiency class: A++ Performance Cooling down Exchanger water flow rate: 0.36 m 3 /h Available pump head: 66.5 kPa Sound power level : 66 dB(A) Sound pressure : 51 dB(A) Heating Exchanger water flow rate: 0.41 m 3 /h Available pump head: 57.9 kPa Sound power level : 66 dB(A) Sound pressure : 51 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R-410 Operating limits Heating External air temperature : -20°C ~ 45°C Introduced water temperature : 24°C~ 60°C Cooling down External air temperature : -10°C ~ 46°C Introduced water temperature : -8°C ~ 20°C Dimensions and weight Dimensions (LxWxH): 900x420x1240 mm Empty weight: 100.0 Kg Climaveneta reversible heat pumps from 4.2 to 35.1 kW Perfect comfort and maximum efficiency Outdoor unit capable of heating, cooling and domestic hot water production with hermetic rotary compressors driven by variable speed motors in single circuit configuration using R410A refrigerant, air side exchange coil with copper pipes and aluminum fins, water side heat exchanger with brazed plates. The unit is equipped with an electronic expansion valve and built-in hydronic module as standard. Flexible and reliable machine that adapts to the most diverse load conditions thanks to the accurate thermoregulation combined with the use of inverter technology. The accurate design and the use of innovative variable speed motors (inverters) ensure a high level of energy efficiency both at full and partial load. The heat pump for every need System efficiency The unit is designed with a system approach: all components are regulated synergistically according to proprietary logics to maximize unit efficiency. High efficiency at partial loads High seasonal efficiency values, thanks to the modulation of the compressor with DC inverter technology which guarantees the exact energy in correspondence with the real needs of the building. High efficiency which translates into reduced energy consumption throughout the unit's working period. Comfort applications Residential buildings Business premises Infrastructure for entertainment Executive offices Hotels and Resorts Health facilities Centralized systems that can be created with cascade systems ErP Ready i-BX-N thanks to the inverter technology complies with the ErP directive, exceeding the minimum requirements for seasonal energy efficiency in heating, SCOP, both for low temperature and medium temperature applications Silent operation : Noise emissions are reduced thanks to the modulation of the frequency of the compressor and the speed of the fan Reduced consumption : The dynamic control of the water delivery temperature according to the outside air temperature greatly increases the comfort and energy efficiency of the system Domestic hot water : The production of domestic hot water is guaranteed all year round. The controller manages hot water production via a 3-way valve to be installed outside the unit Ease of installation : The i-BX-N heat pumps are of the "packaged" monobloc type which are particularly simple to install. The hydraulic components are all contained inside the unit and the connection pipes are of the hydraulic type, therefore it is not necessary to carry out the typical procedures of direct expansion air conditioning systems Intelligent management of your system Nadisystem guarantees centralized regulation of the system, ensuring: Easy communication between the different components Simplified installation Reduced number of checks Integration between different sources Nadisystem integrates different energy sources based on the availability, yields and costs of their use, always preferring renewable sources. The auxiliary sources are activated to meet the building's needs at low outside temperatures by integrating the thermal power of the heat pump System customization Nadisystem has various special functions that allow you to customize the system for every need. The controller is able to regulate two zones in both heating and cooling and with different flow temperatures, making the i-BX-N heat pump compatible with different types of system with different water temperature levels. Cascade management of units If the heat requirements are high, it is possible to connect up to 4 units of the same power, optional configuration. The cascade configuration is managed in master/slave mode, with the master unit managing the information and transmitting it to the slave units. Structure Structure consisting of a base and self-supporting panels in hot-dip galvanized steel, painted with RAL 7035 polyester powders. Solidity and robustness Maximum accessibility for service and maintenance operations Fans Axial fans with stepless speed regulation that improve the air distribution obtaining low consumption and minimizing the sound level Drums Condenser with copper tubes and aluminum fins Standard coil protection grids up to size 015 Control Keyboard with LCD display and electronic adjustment via menu NADI Compact Functional keys Graphic display and icons allow quick and easy consultation and intervention on the unit by means of a multi-level menu NADISYSTEM control Setting of the water set point with fixed or dynamic value with Climatic Curve. Antifreeze protection according to water temperature and outside air temperature. Domestic hot water production. 4 Management of external auxiliary sources. Two zones with different water temperature distribution Digital input for night function (Night mode). Remote connectivity to BMS systems via serial card (accessory). Cascade system management If the heat requirements are high, it is possible to connect up to 4 units of the same power in cascade Managed in master-slave mode, with the master unit in charge of processing the information and then transmitting it to the slave units High degree of partialisation of the supplied power, without reducing performance, and precise sizing of the system Possibility of dedicating just one or all the units to the production of domestic hot water. Integrated hydronic group All plumbing components for installation are already included with no increase in unit size. EC pump, brushless motor with electronic switching to guarantee low consumption and high system efficiency Flow switch, to protect the exchanger for low water flow rates Safety valve. Expansion vessel. Air vent valve. Mesh filter, unassembled but supplied with the unit Evaporator Brazed plate heat exchanger in AISI 316 steel, externally lined with anti-condensation mat in closed cell neoprene (CFC and HCFC-free). Thermostatic electric resistance to protect against the formation of ice inside. Low pressure drops and optimized heat exchange Refrigerant circuit Standard electronic expansion valve Optimized coolant flow Precise and effective temperature control Fast regulation and high efficiency Compressor Mitsubishi Electric compressors, synonymous with quality, reliability and performance at partial loads. Compressor installed on rubber anti-vibration supports and acoustically isolated by special sound-absorbing material. Special antifreeze function Dedicated algorithms avoid the formation of ice inside by managing the operation Of the electrical resistance on the plate heat exchanger. Of the pump according to the outside air temperature. Of the flow switch in case of no flow The unit is also set up to operate, with brine mixtures, down to an exchanger outlet temperature of -8°C. Accessories Remote keyboard Wired room terminal with backlit display, complete with temperature and humidity probe Cascade unit management kit Domestic hot water tank probe and inertial tank probe Copper-Aluminium type batteries with epoxy painting Copper-Copper type batteries Hydraulic separator Domestic hot water storage Antifreeze electric heater on base and for auxiliary condensate drain pan RS485 serial card for ModBus protocol Rubber base anti-vibration mounts Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS OPTIONAL START UP! Technical features Model : AU162FYCRA(HW) Commercial code: 25023016Z Surface : Up to 180 m2 Standard YR-E27 command Standard Y-filter Heating LWT 35°C ~ OAT 7°C Output power: 16.00 kW Absorbed power: 3.86 kW COP: 4.15 Heating LWT 55°C ~ OAT 7°C Output power: 14.01 kW Absorbed power: 5.63 kW COP: 2.49 Energy efficiency Heating with medium delivery water temperature at 35°C SCOP : 4.00 ηs : 157% Energy class: A++ Heating with medium delivery water temperature at 55°C SCOP: 3.09 ηs : 121% Energy class: A+ Cooling LWT 7°C ~ OAT 35°C Output power: 14.50 kW Absorbed power: 4.92 kW EER: 2.95 Cooling LWT 18°C ​​~ OAT 35°C Output power: 16.00 kW Absorbed power: 3.64 kW EER: 4.40 Performance Water flow rate: 45.8 l/min Minimum system water content: 80 litres Sound power : 68 dB(A) Internal water pump model : Grundfos External temperature operating limits Heating : -20°C ~ 35°C Cooling : 10°C ~ 46°C Delivery water temperature range Heating : 25°C ~ 55°C Cooling : 5°C ~ 20°C Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Installation data Inlet / outlet liquid pipes diameter: 1" F Dimensions and weight Net dimensions (LxPxH): 950x370x1500 mm Net weight : 145.0 Kg Gross dimensions (LxDxH): 1010x480x1638 mm Gross weight : 157.0 kg R-32 Haier Super Acqua Monoblock Air-Water Heat Pump Super Acqua is the new Haier monobloc air/water heat pump , reversible, high efficiency , with DC inverter compressors, DC Brushless fans, and DC inverter circulator. The Haier Super Acqua packaged heat pump has been designed for residential and commercial applications and is designed for: Winter heating Summer cooling Domestic hot water production All the advantages of a heat pump system In a period of energy price increases like the one we are experiencing, the presence of a heat pump system in the home can help a lot in terms of savings. The heat pump works on the basis of a heat exchange process between environments with different temperatures: the machine obtains energy from the air or from the subsoil or from the water and returns it to the internal environment through the heat exchanger. The energy produced by a heat pump can be used to heat or cool rooms but also to produce hot water. Heat pumps are considered a cost-effective choice because they can produce up to 5 kWh of thermal energy with 1 kWh of electricity, so you get more energy than you use. In addition to the indisputable economic advantages, linked to greater energy efficiency, a heat pump system requires less maintenance, since fuel oil or gas is not burned inside. Finally, from the point of view of environmental impact, the heat pump can certainly be said to be more sustainable because it does not produce CO ₂ emissions caused by the combustion of fossil raw materials. The advantages of heat pumps are therefore various and are even more evident in Haier's Super Water air heat pumps, monobloc and split , which guarantee maximum comfort Maximum comfort with the Super Acqua heat pump The Haier Super Acqua heat pump ensures maximum comfort thanks to: - Fast and comfortable heating - Standard YR-E27 / YR-E27A remote control , which allows optimal management of energy flows, as well as easy control of the various operating parameters of the machine - Minimum sound level with "Quiet" operating mode - Domestic hot water (DHW) regulation and "Turbo" mode to reach the water temperature set point in the shortest possible time - Predefined time programs with switching on and/or switching off differentiated for working days and weekends Haier Super Acqua heat pump installation: quick and easy! The Haier Super Acqua packaged heat pump , with the integrated heat exchanger , does not require the connection of gas pipes. The integrated hydraulic circuit is equipped with a high efficiency inverter circulator. Also included as standard: • Expansion valve • Differential flow switch • Safety valve to guarantee the stability of the hydronic system • 4-way valve for reversing the refrigeration cycle The compact dimensions facilitate installation even in small spaces . Safety first On the safety side, in addition to the water overpressure valve installed inside , there are also pressure sensors and pressure switches on the gas side . Furthermore, the flow switch (or differential pressure switch) and the continuous control of the inlet-outlet water temperatures guarantee that the unit always works with the correct flow rate, avoiding malfunctions or, worse, damage to components. There is also a dedicated " antifreeze " logic: if the external temperature and water conditions require it, the internal pump will be activated and, if necessary, also the compressor, to bring the water back to temperatures far from freezing Top performance in all seasons The guaranteed heating performance down to -20°C outside temperature make the Super Acqua heat pump suitable for installation in any climatic zone, even in those with the most severe conditions. The supplied temperature sensors ensure that, in case of temperatures below 0°C, the compressor and the pump are constantly in operation to avoid possible freezing. The 5 kW heat pump size guarantees its performance down to -25°C outside temperature Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS   FREE FIRST START-UP Technical features Model : OMNIA S 3.2 16T Product code : 0XHUGSWA Command included Optional accessories CONNECT CRP remote control Performance   Heating Useful power in heating with water set at 35° C: 15.9 kW Useful power in heating with water set at 45° C: 16.0 kW Useful power in heating with water set at 55°C: 16.0 kW Absorbed power with water set at 35° C: 3.53 kW Absorbed power with water set at 45° C: 4.57 kW Absorbed power with water set at 55° C: 5.61 kW Water flow rate with water set at 35° C : 2735 l/h Water flow with water set at 45° C : 2752 /h Water flow rate with water set at 55° C : 1720 l/h Cooling down Useful power in cooling with water set at 7 °C: 14.0 kW Useful power in cooling with water set at 18 °C: 13.6 kW Absorbed power with water set at 7° C: 5.60 kW Absorbed power with water set at 18° C: 3.77 kW Water flow rate with water set at 7° C : 2408 l/h Water flow rate with water set at 18° C : 2563 l/h External unit technical data Compressor type : Twin Rotary DC Number of compressors : 1 Number of cooling circuits: 1 Type of fans : DC axial Number of fans : 1 Sound power level in heating : 56 ~ 69 dB(A) Sound power level in cooling : 56 ~ 69 dB(A) Liquid pipe diameter : 9.52 mm (3/8") Gas pipe diameter: 15.88 (5/8") Maximum piping length: 30 m Maximum pipe height difference: 20 m Indoor unit technical data Exchanger type : Brazed stainless steel plates Expansion vessel volume: 10 litres Water safety valve setting: 3 bar Minimum system water content: 40 litres System piping diameter: 1" gas F DHW piping diameter: 3/4" gas F Liquid pipe diameter : 9.52 mm (3/8") Gas pipe diameter: 15.88 (5/8") Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Dimensions and weight External unit dimensions (WxHxD): 1118x865x523 mm Outdoor unit weight: 112.0 Kg Internal unit dimensions (WxHxD): 595x1860x700 mm 5 years without worries Ferroli OMNIA ST 3.2 Air-water reversible heat pumps for split installation, with integrated DHW storage Efficiency marries comfort for integrated storage OMNIA ST 3.2 is the evolution of OMNIA S 3.2 and is part of the new range of Full Inverter R32 split heat pumps by Ferroli. When we speak of "split" we mean that the refrigerant circuit is divided between the two units, the external and the internal one. The outdoor unit contains the heart of the refrigerant circuit, from the compressor to the fan with the air side exchanger, which is connected to the refrigerant gas pipes towards the indoor unit. The indoor unit, on the other hand, contains the heart of the generator's hydraulic circuit with all the main pre-installed components, such as the high-efficiency circulator and the expansion tank, to safely allow quick and practical installation. The OMNIA ST 3.2 differ from the OMNIA S 3.2 in having integrated a storage tank for domestic hot water directly into the internal unit. This accumulation is 190L for sizes from 4 to 10, while it is 240L for uppers, from 12 to 16T. But that's not all, OMNIA ST 3.2 can be customized according to your needs, with an 18L inertial kit, kit for solar integration on the storage tank or with a kit for managing 2 different zones, classic direct and mixed, in case where we need 2 different temperatures on the terminals in the house Thanks to its wide operating range , among the widest on the market, OMNIA ST 3.2 works down to -25°C outside and produces hot water up to 65°C in nominal conditions. The new Full Inverter concept by Ferroli uses DC inverter modulations on the 3 main energy-intensive components of the machine, i.e. compressor, fan and pump. This makes it possible to modulate the power supplied by finely tracking the thermal load and allowing the user very high efficiencies and important energy savings . Furthermore, Ferroli's Full Inverter concept allows for the inrush currents to be reduced, avoiding sudden changes to the grid and guaranteeing a longer useful life for the components. With sound levels among the lowest on the market , OMNIA ST 3.2 is able to satisfy all system requirements, but can easily be integrated with a Ferroli boiler. The indoor unit, the heart of hydraulic distribution If the outdoor unit contains the heart of the refrigerant circuit, the indoor unit contains the heart of the water circuit. OMNIA ST 3.2 is much more than an exchanger with a pump. The hydronic module includes all the main components of the system and can be customized according to the user's needs. Stainless steel plate heat exchanger, pressure gauge and sensors, expansion tank, safety valve, automatic vent and brushless DC circulator are just some of the components you will find inside The control system The user interface has been equipped with capsense technology with 2.8” graphic display, which allows the user to interact with the product easily and extremely simply Modbus protocol It can be interfaced to BMS/BACS automation and management systems Heating and cooling Full Inverter modulation finely follows the desired setpoints, with the possibility of setting heating and cooling climatic curves, further optimizing consumption for the user Domestic hot water production When the DHW temperature probe calls the machine, it automatically switches to the domestic hot water tank with dedicated DHW set point. 3-way diverter valve supplied as standard Smart Grid input from photovoltaic and grid Digital Smart Grid inputs for the management of an input from the photovoltaic system and from the electricity grid. These allow you to optimize consumption and bill costs DHW tank electrical resistance The DHW electrical integration serves as integration, anti-legionella or reserve source in the event of an anomaly Fast DHW Priority to DHW production to bring the storage tank to the set point in the shortest possible time Anti-legionella function Allows you to set anti-legionella weekly cycles Silent mode Reduces the frequency of the compressor and the speed of the fan, so as to significantly reduce noise. Programmable on time slots ON/OFF From external contact. Activation and deactivation via an external contact, for example from a zone thermostat Hot / cold From external contacts. Summer/winter switching signal from outside, for example from the zone thermostat ECO function Dedicated setpoint for " Eco " operation. Settable with daily time band Anti-freeze protection Heat pump operation with circulator ON and possible electric booster The brand new Connect CRP and Connect CRP Zone The on-board interface communicates easily with the new Connect CRP intelligent systems, which can manage up to 8 thermostats divided into 2 zones, one direct and one mixed . Connect CRP is the brand new remote controller accessible via APP , available for both iOS and Android . The Connect CRP Zone, on the other hand, is a zone thermostat that communicates via RF with the Connect CRP. It can be placed in a classic 502 box, or left stand-alone on its practical table feet Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less