Ebara booster set with 2 horizontal multistage cast iron pumps and 304 stainless steel manifolds 2GPE COMPACT A12/1 ESPM 2001051102 WITHOUT TANK AND WITH SILENT MONTALIQUIDI ARRANGEMENT General characteristics Brand: Ebara Model of the supplied product: 2GPE COMPACT A12/1 ESPM Supplied product code: 2001051102 Description TYPICAL APPLICATIONS The base of the group is in galvanized steel and so are the manifolds. The delivery manifold is designed to accommodate 2 tanks a membrane of the vertical type; 2 pressure switches are mounted on it, the electrical panel and a pressure gauge. Each electric pump has in suction a shut-off valve and a non-return valve, with possibility of connection to an air feeder and is equipped with another isolating valve in delivery. TECHNICAL FEATURES The HERTZ TWIN control panel is an automatic control system and protection for two centrifugal electric pumps equipped with three-phase motors induction. The panel power supply can be three-phase or single phase. The HERTZ TWIN control panels include a pump control software and allow speed adjustment of the motor by means of an electronic frequency variator (Inverter) which powers the pump motor. As the rotation speed varies pump performance varies in terms of flow rate and head allowing its optimal use in all conditions while saving energy. ADVANTAGES • Energy savings as the controller modulates the pump a depending on the hydraulic energy demand of the plant with respect to a direct connection to the network • Better and faster regulation • Reduction of water hammering thanks to a start and stop gradual • Better comfort in heating, air conditioning and heating systems pressurization • Reduced starting current • Exchange at each restart of the powered pump • Speed ​​modulation on both pumps for one optimal adjustment The typical applications of the GPE series booster sets with i paintings are: • Water supply for distribution networks, condominiums, schools, hotels, hospitals, etc. • Water supply for industry in general • Irrigation of gardens, parks and sports fields Inverter-controlled units with two horizontal multistage pumps. PUMP CHARACTERISTICS FIELD OF USE • Maximum working pressure: 10 bar • Maximum liquid temperature: 40°C MATERIALS • Pump body and support in cast iron • External jacket in AISI 304 • Technopolymer impeller and diffuser • Shaft in AISI 416 TECHNICAL DATA • Self-ventilated 2-pole asynchronous motor • Class of insulation F • IP44 degree of protection • Single-phase voltage 230V ± 10% 50Hz, three-phase voltage 230/400V ± 10% 50Hz • Permanently inserted capacitor and protection thermo-amperometric sensor with built-in automatic reset for the single-phase motor • Protection by the user for the three-phase version Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

TECHNICAL DATA Operating range: from 0.5 to 36 m3 /h Pumped liquid: clean, free from solid or abrasive substances, non viscous, non aggressive, non crystallized and chemically neutral, close to the characteristics of water. Liquid temperature range: from 0°C to +40°C Maximum ambient temperature: +40°C Maximum working pressure: PN16 Special executions on request: contact the sales network Degree of protection: IP44 APPLICATIONS Booster sets particularly suitable for domestic use, small systems for civil or industrial use, irrigation systems, washing systems. They stand out for their absolute reliability, simplicity of operation and minimal maintenance. CONSTRUCTION CHARACTERISTICS - COMPONENTS HYDRAULIC PART KVC multistage centrifugal electric pumps. Galvanized sheet metal base complete with 4 anti-vibration rubber feet. Suction and delivery manifolds in AISI 304 steel. Ball valves with union on the suction and delivery of each pump. Suction check valves of each pump. 2 AISI 304 stainless steel caps for closing the manifolds. Radial pressure gauge with shut-off valve. 1 membrane tank 8 liters (optimizes the number of pump starts). ELECTRICAL PART 1 Active Driver Plus module on the delivery of each pump (see hints on Active Driver Plus at the beginning of the paragraph). 1 protection switchboard. MULTI INVERTER SYSTEM WITH ACTIVE DRIVER PLUS The inverter continuously regulates the rotation speed of an electric pump, so as to maintain a constant pressure as the flow rate varies. The other electric pumps, always at variable speed, are inserted in cascade after the first one has reached maximum speed and, by modulating, they compensate for the pressure fluctuations in the system. At each operating cycle, it is possible to set the restart switching to a different pump, so as to guarantee uniform use of all the electric pumps. It is also possible to set work times for each pump, with operation switching after the set time. The “SP” pressure can be adjusted by the user using two keys “+” and “-” placed on the AD (as a rule all the pumps are set to the same pressure value). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

TECHNICAL DATA Operating range: from 0.5 to 36 m3 /h Pumped liquid: clean, free from solid or abrasive substances, non viscous, non aggressive, non crystallized and chemically neutral, close to the characteristics of water. Liquid temperature range: from 0°C to +40°C Maximum ambient temperature: +40°C Maximum working pressure: PN16 Special executions on request: contact the sales network Degree of protection: IP44 APPLICATIONS Booster sets particularly suitable for domestic use, small systems for civil or industrial use, irrigation systems, washing systems. They stand out for their absolute reliability, simplicity of operation and minimal maintenance. CONSTRUCTION CHARACTERISTICS - COMPONENTS HYDRAULIC PART KVC multistage centrifugal electric pumps. Galvanized sheet metal base complete with 4 anti-vibration rubber feet. Suction and delivery manifolds in AISI 304 steel. Ball valves with union on the suction and delivery of each pump. Suction check valves of each pump. 2 AISI 304 stainless steel caps for closing the manifolds. Radial pressure gauge with shut-off valve. 1 membrane tank 8 liters (optimizes the number of pump starts). ELECTRICAL PART 1 Active Driver Plus module on the delivery of each pump (see hints on Active Driver Plus at the beginning of the paragraph). 1 protection switchboard. MULTI INVERTER SYSTEM WITH ACTIVE DRIVER PLUS The inverter continuously regulates the rotation speed of an electric pump, so as to maintain a constant pressure as the flow rate varies. The other electric pumps, always at variable speed, are inserted in cascade after the first one has reached maximum speed and, by modulating, they compensate for the pressure fluctuations in the system. At each operating cycle, it is possible to set the restart switch to a different pump, so as to ensure uniform use of all the electric pumps. It is also possible to set work times for each pump, with operation switching after the set time. The “SP” pressure can be adjusted by the user using two keys “+” and “-” placed on the AD (as a rule all the pumps are set to the same pressure value). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ebara booster set with 2 horizontal double impeller pumps with cast iron hydraulics and 304 stainless steel manifolds 2GP CDA 200 M 2001150000B WITHOUT TANK AND WITH MONTALIQUIDI ARRANGEMENT General characteristics Brand: Ebara Supplied product model: 2GP CDA 200M Supplied product code: 2001150000B Data sheet Maximum flow rate, m3/h: 13.2 Maximum pumping height: 64m Maximum working pressure: 6.4 bar Maximum liquid temperature: 45°C Suction diameter: G2 Outlet diameter: G1½ Electrical connection: 230V, single phase Motor power: 1.5 + 1.5 kW Motor type: 2 poles Description Protection and control panel with CE mark: • Very low voltage auxiliary circuit • Switching on and off of the engines by means of two pressure switches • It is possible to connect to floats, or minimum pressure switch, to avoid operation under water shortage conditions aspiration • There is a device that swaps the starting order of the pumps at every request • Diet: - single-phase 230V, 50Hz - three-phase 400V, 50Hz • Direct starting • Power circuit protection fuses • Auxiliary circuit protection fuses • IP 55 degree of protection • Main disconnect switch with door lock • Automatic switches - 0 - man. for each pump • Thermal protection reset • Indicator LEDs: - network presence - engine running - level alarm (if the optional float is installed) - motor protection (only for the three-phase version) • Alarm output setup Units with two horizontal double impeller pumps with cast iron hydraulics. TYPICAL APPLICATIONS The typical applications of the 2GP series booster sets are: • Water supply for distribution networks inherent in the sector of the building service • Water supply for industry in general • Irrigation of gardens, parks and sports fields GROUP EQUIPMENT • Two AGA series pumps with 2-pole asynchronous motor self-ventilated, efficiency class IE2 for three-phase motors starting from 0.75 kW • Switchgear: the system is equipped as standard with a control panel pump alternation control • Operation of the pumps regulated by pressure switches • Wetted parts are corrosion resistant • Base in galvanized steel • Manifolds in galvanized steel and on request AISI 304, AISI 316. I collectors are sized according to the total flow rate of the group pressurization • Shut-off valve on the suction and discharge sides of each pump • Check valve on the suction side of each pump • Pressure gauge, delivery side • Prearranged for delivery side hydroaccumulator vessel connection • Prepared for connecting external air feeders • Prepared for connection of a device against lack of water Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ebara booster set with 2 horizontal multistage pumps with cast iron body and 304 stainless steel manifolds 2GP COMPACT A/12 M 2001050300B WITHOUT TANK AND WITH SILENT MONTALIQUIDI ARRANGEMENT General characteristics Brand: Ebara Model of the supplied product: 2GP COMPACT A/12 M Supplied product code: 2001050300B Data sheet Maximum flow rate, m3/h: 9.6 Maximum pumping height: 74 m Maximum working pressure: 7.4 bar Maximum liquid temperature: 40°C Suction diameter: G1½ Outlet diameter: G1½ Electrical connection: 230V, single phase Motor power: 0.88 + 0.88 kW Motor type: 2 poles Description Protection and control panel with CE mark • Very low voltage auxiliary circuit • Starting and stopping of the engines are controlled by two pressure switches • It is possible to connect to floats, or minimum pressure switch, for avoid operation under water shortage conditions aspiration • There is a device that swaps the starting order of the pumps at every request • Diet: - single-phase 230V, 50Hz - three-phase 400V, 50Hz • Direct starting • Power circuit protection fuses • Auxiliary circuit protection fuses • IP 55 degree of protection • Main disconnect switch with door lock • Automatic switches - 0 - man. for each pump • Thermal protection reset • Indicator LEDs: - network presence - engine running - level alarm (if the optional float is installed) - motor protection (only for the three-phase version) • Alarm output setup Groups with two horizontal multistage pumps. Units with two horizontal double impeller pumps with stainless steel hydraulics. TYPICAL APPLICATIONS The typical applications of the 2GP series booster sets are: • Water supply for distribution networks inherent in the sector of the building service • Water supply for industry in general • Irrigation of gardens, parks and sports fields GROUP EQUIPMENT • Two pumps of the COMPACT series with 2-pole asynchronous motor self-ventilated, efficiency class IE2 for three-phase motors starting from 0.6 kW • Switchgear: the system is equipped as standard with a control panel pump alternation control • Operation of the pumps regulated by pressure switches • Wetted parts are corrosion resistant • Base in galvanized steel • Manifolds in galvanized steel and on request AISI 304, AISI 316. I collectors are sized according to the total flow rate of the group pressurization • Shut-off valve on the suction and discharge sides of each pump • Check valve on the suction side of each pump • Pressure gauge, delivery side • Prearranged for delivery side hydroaccumulator vessel connection • Prepared for connecting external air feeders • Prepared for connection of a device against lack of water Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ebara booster set with 2 horizontal multistage pumps with cast iron body and 304 stainless steel manifolds 2GP COMPACT A/10 M 2001050400B WITHOUT TANK AND WITH SILENT MONTALIQUIDI ARRANGEMENT General characteristics Brand: Ebara Model of the supplied product: 2GP COMPACT A/10 M Supplied product code: 2001050400B Data sheet Maximum flow rate, m3/h: 9.6 Maximum pumping height: 62m Maximum working pressure: 6.2 bar Maximum liquid temperature: 40°C Suction diameter: G1½ Outlet diameter: G1½ Electrical connection: 230V, single phase Motor power: 0.75 + 0.75 kW Motor type: 2 poles Description Protection and control panel with CE mark • Very low voltage auxiliary circuit • Starting and stopping of the engines are controlled by two pressure switches • It is possible to connect to floats, or minimum pressure switch, for avoid operation under water shortage conditions aspiration • There is a device that swaps the starting order of the pumps at every request • Diet: - single-phase 230V, 50Hz - three-phase 400V, 50Hz • Direct starting • Power circuit protection fuses • Auxiliary circuit protection fuses • IP 55 degree of protection • Main disconnect switch with door lock • Automatic switches - 0 - man. for each pump • Thermal protection reset • Indicator LEDs: - network presence - engine running - level alarm (if the optional float is installed) - motor protection (only for the three-phase version) • Alarm output setup Groups with two horizontal multistage pumps. Units with two horizontal double impeller pumps with stainless steel hydraulics. TYPICAL APPLICATIONS The typical applications of the 2GP series booster sets are: • Water supply for distribution networks inherent in the sector of the building service • Water supply for industry in general • Irrigation of gardens, parks and sports fields GROUP EQUIPMENT • Two pumps of the COMPACT series with 2-pole asynchronous motor self-ventilated, efficiency class IE2 for three-phase motors starting from 0.6 kW • Control unit: the system is equipped as standard with a control panel pump alternation control • Operation of the pumps regulated by pressure switches • Wetted parts are corrosion resistant • Base in galvanized steel • Manifolds in galvanized steel and on request AISI 304, AISI 316. I collectors are sized according to the total flow rate of the group pressurization • Shut-off valve on the suction and discharge sides of each pump • Check valve on the suction side of each pump • Pressure gauge, delivery side • Prearranged for delivery side hydroaccumulator vessel connection • Prepared for connecting external air feeders • Prepared for connection of a device against lack of water Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less