icon Ferroli | CaldaieMurali

Ferroli

Ferroli

Discover our exclusive collection of Ferroli boilers, air conditioners and water heaters. Choose comfort and efficiency with our quality products. Reach maximum domestic comfort with Ferroli. Explore our collection today.

497 products


  • immagine-1-ferroli-cronotermostato-ferroli-settimanale-riscaldamento-wifi-ios-e-android-batterie-stilo-programmazione-digitale-013010xa-connect-ean-8028693885232

    Ferroli Ferroli Weekly Chronothermostat Heating Wifi - Ios And Android Stylus Batteries Digital Programming 013010xa Connect

    Ferroli Weekly Chronothermostat Heating Wifi - IOS and Android Stylus Batteries Digital Programming 013010XA Connect Remote control for home comfort management also from Smartphone. Connection to the home WiFi network for internet access via the supplied RF/WiFi receiver. CONNECT APP available for boiler on/off and domestic heating/DHW comfort management remotely via Smartphone (iOS and Android) Through the APP it is possible to remotely control the boilers in «advanced» mode via the OpenTherm connection and in «basic» mode via the ON/OFF connection. Modulating regulation of the flow temperature with room climatic compensation, for boilers connected via OpenTherm ("evolved"). Modulating flow temperature regulation with climatic compensation via external temperature (detected from the internet or from an optional external probe), for boilers connected via OpenTherm ("advanced") It improves the average seasonal efficiency in space heating by +4% if combined with boilers via the OpenTherm connection. Room regulation with functioning as an ON/OFF chronothermostat, for boilers connected via on/off ("base") Weekly time programming in 30 minute intervals (via APP CONNECT). Reading of the external temperature from the internet (via APP CONNECT) or from an optional external probe (if present) Alarm display and possibility of boiler release (also via APP CONNECT) Operating modes: Off, Holiday, Automatic, Manual. Three modifiable temperature levels: Comfort, Economy, Antifreeze Battery status indicator (also from APP CONNECT) Material supplied: 2 1.5V AAA TYPE batteries, table stand, 230 Vac power supply, boiler connection USB cable, set of screws for wall fastening, user manual. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

    €150,00

  • immagine-1-ferroli-cronotermostato-ferroli-romeo-a-filo-con-programmazione-settimanale

    Ferroli Ferroli Romeo A Filo Chronothermostat With Weekly Programming

    Model Ferroli Romeo A Filo Chronothermostat With Weekly Programming Characteristics With Romeo you can: Adjust the heating and DHW temperatures Know the operating status of the boiler View the temperatures inside and outside the house Restart the boiler in case of temporary lockout Program the daily or weekly environmental comfort Activate/deactivate the heating function via the telephone General characteristics ROMEO Weekly modulating remote control, having the following characteristics: weekly programming, max 6 periods per day; heating and domestic hot water flow temperature settings; visualization of external temperature and possibility of working with sliding temperature via external probe (optional); modulation of the flow temperature according to the room temperature; ignition - shutdown - reset of the boiler; telephone contact input. Both models with wired connection and with Wireless radio transmitter are available. The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings.

    €86,00

  • Caldaia A Gas Ferroli Bluehelix K 50 32 Kw A Condensazione Gpl Completa Di Kit Scarico Fumi - New Erp - CaldaieMurali

    Ferroli Ferroli Bluehelix K 50 32 Kw LPG Condensing Gas Boiler Complete With Fume Exhaust Kit - New Erp

    FERROLI BLUEHELIX K 50 32 Kw LPG CONDENSING GAS BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP Technical features Product code: 20133714 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Heating/sanitary performance DHW nominal heat input kW 25.00 Sanitary nominal thermal power kW 26.25 Nominal heat input Heating kW 20.00 Nominal thermal power Heating (80°/60°) kW 19.48 Useful efficiency Pn max - Pn min (80°/60°): 97.4 - 97.1% Useful efficiency 30% Pn max (30th return): 108% Overall electric power (max heating/DHW power): 87/97 W Supply voltage V-Hz 230-50 IP X5D degree of protection Warm-up exercise Maximum pressure: 3 bars Minimum pressure for standard operation: 0.25-0.45 bar Heating H2O temperature selection range: 20/45 ÷ 40/80 °C Pump: maximum head available for the system: 390 mbar at a flow rate of 1,000 l/h Membrane expansion tank: 10 lt Sanitary exercise Max-min pressure: 0.15/8bar Quantity of hot water: - with Δt 25°C l/min 15.1 - with Δt 30° C l/min 12.5 - with Δt 35° C l/min 10.8 Minimum domestic water flow rate l/min 2 Sanitary H2O temperature selection range °C 37-60 Dimensions Dimensions (hxwxd) mm 740 x 470 x 275 ; 35 kgs NOx class: 6 Power supply: CNG/LPG Dedicated codes are no longer necessary in the case of LPG because the new Family is able to automatically adapt its operation to the type of fuel General characteristics New Family: the best ever: The new Family is the Riello solution for the most demanding user. The primary exchanger, entirely made of stainless steel, guarantees maximum efficiency and reliability over time and the new optimized sanitary exchanger ensures exceptional comfort and the best class of merit (class A). The new Family is available with powers of 25, 30 and 35 kW, in instantaneous combined and heating only versions. ACC self-adaptive electronic combustion control Range Rated Approval Possibility of integration in hybrid systems via integrated ModBus protocol New panel with color display and intelligent system filling function 10 liter expansion tank High head, low consumption modulating circulator Modulation ratio 1:8 Standard flue gas flange with dedicated flue system Clapet valve and SRD device as standard Standard thermoregulation in combination with the external probe, available as an accessory Possibility of recessed installation (model 25 KIS) and outdoors in partially protected places (IPX5D) Assembly template, hydraulic fittings, power supply cable and hole plug for interface remote control supplied Kit for REC10 remote control in supplied room Plumbing fittings with shut-off system taps, gas tap and cold water supplied Ease of installation and wide choice of accessories New primary exchanger in stainless steel Riello has always designed its products with care and dedication. Continuous improvement leads today to the evolution of the Family condensing range, starting from its primary element: the exchanger. The new Family exchanger is made of stainless steel, with a smooth tube with a large section to guarantee the best efficiency and cleanliness over time. Access remains from the front, to facilitate maintenance operations. FAMILY IS AVAILABLE IN 3 POWER LEVELS, IN COMBINED (KIS) AND HEATING ONLY (IS) VERSIONS FAMILY 25 - KIS AND IS VERSION FAMILY 30 - KIS VERSION FAMILY 35 - KIS AND IS VERSION Dedicated codes are no longer necessary in the case of LPG because the new Family is able to automatically adapt its operation to the type of fuel. The characteristics of Family and its compact dimensions make it the ideal solution for both indoor and recessed installation (25 kW model) or outdoors in a partially protected place. Control panel and functions Even clearer, more intuitive and easier to use, it integrates elegantly into the aesthetics of the machine. The large backlit display, the raised keys and the interface enriched with explanatory texts and icons help the user and the installer in navigation. Through the panel it is possible to view the operating status, carry out the programming and access the regulation of the boiler and system. The RiCLOUD intelligent remote control allows you to manage the comfort of your home in a simple and intuitive way, even when you are away from home. Through the dedicated app it is in fact possible to check the status of the heating system, but also to program the boiler's switching on and off, temperature and operating times directly from your smartphone or tablet. It is possible to manage up to 8 different zones, each controlled by its own RiCLOUD. RiCLOUD can also be installed in total wireless mode using a radio frequency receiver, available as an accessory, thus avoiding any electrical or masonry intervention. Intelligent system loading Through the panel it is possible to independently carry out the filling of the system, if the pressure drops below the minimum reference value. Information display In addition to the date and time, the display shows the basic information relating to boiler operation: the water delivery temperature and the system pressure. Via an icon on the display, the boiler also warns of the need to carry out scheduled maintenance. Programming Programming boiler operation according to your needs is easy and intuitive. From the panel it is possible to carry out the hourly and daily programming for each zone of the system. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    €1.731,00

  • Caldaia Ferroli Bluehelix Sublime 34c A Condensazione Cod. 0tsb7awa Completa Di Kit Scarico Fumi Iot Connect Con Comando Remoto E Sonda Esterna Metano O Gpl - Novita' - CaldaieMurali

    Ferroli Ferroli Bluehelix Sublime 34c Condensing Boiler Cod. 0tsb7awa Complete With Iot Connect Fume Exhaust Kit With Remote Control And Methane Or LPG External Probe - New

    Ferroli Bluehelix Sublime 34C condensing boiler cod. 0TSB7AWA complete with IOt connect fume exhaust kit with remote control and methane or LPG external probe - New Heating ERP class A+ Sanitary ERP Class A Load profile XXL Heating max / min heat input (Hs) kW 30.6 / 2.9 Max / min heat output heating (80/60°C) kW 30 / 2.8 Max / min heat output heating (50/30°C) kW 32.5 / 3.1 Max / min DHW heat input (Hi) kW 34.7 / 2.9 Max / min DHW thermal power kW 34.0 / 2.8 Efficiency 30% (Hi) % 109.5 Max / min heating pressure bar 3 / 0.8 Sanitary flow rate ∆t 25°C l/min 19.5 Dimensions HxWxD 700x420x320 BLUEHELIX extension The most beautiful boiler ever BLUEHELIX SUBLIME, the most beautiful wall boiler ever with an exclusive design (Patented) has finally arrived on the market. Its exclusive lines radically innovate the aesthetic concept proposed so far, through the use of crystal and the revolutionary use of curved shapes. A multicolored ambient LED, set in a central position, allows you to perceive the status and operating modes of the boiler, even on a chromatic level. The large 7'' color full touch screen display integrated in the front surface of black tempered glass allows the user to interact with the product in a totally smart way. Supplied with a rich series of accessories such as: smart remote control manageable from iOS and Android apps, plumbing connection kit complete with taps and cover, external temperature probe, router with integrated mobile network connectivity. Conceived to fully satisfy the requests of a "robust " product from every point of view: primary heat exchanger with high passages, secondary sanitary exchanger enhanced with 20 plates, high head circulator, new control electronics with integrated connectivity on the VODAFONE mobile network BUSINESS that does not require a home wifi network. All elements designed to ensure maximum efficiency and reliability over time. INNOVATION Developing sustainable and low environmental impact solutions capable of combating global warming is now a reality! BLUEHELIX SUBLIME is already capable of autonomously self-regulating (plug-in) and functioning correctly in total safety with mixtures of natural gas enriched with hydrogen already foreseen for distribution in Europe (*). BLUEHELIX SUBLIME is not only beautiful but achieves one of the highest energy efficiency of the room heating in the boiler category: ηs 94% and when combined with the remote timer control and the external probe (supplied as standard) it reaches the energy class system grade A+ (scale from G to A+++). TOP SILENCE: ONLY 45 dB* The particularly careful design of BLUEHELIX SUBLIME has made it possible to achieve significant values ​​in terms of silence and acoustic comfort , so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. Even the boiler on/off transients have been optimized as a function of acoustic comfort, so that the customer will no longer have the hassle of understanding whether the boiler is on or off from its noise as with older generations of boilers. THE CONNECTION REVOLUTION! BLUEHELIX SUBLIME is the first connected boiler that uses IoT technology integrated into the mobile network powered by Vodafone Business. (*) Finally an intelligent boiler capable of communicating with the user both via the App, with smartphone devices, but also via text messages or voice messages (Patent Pending) to all other telephone devices, without the need for a home wifi network! More than easy, easy! Thanks to the self-configured "mobile" gateway that does not require any user intervention. THE BOILER CONTROL It has never been so SMART to interact with a boiler. The innovative control and management electronics of BLUEHELIX SUBLIME is at the top levels of the category. The large 7'' full touch screen color graphic display allows real-time viewing of operating information thanks to simple and intuitive graphic screens. With a simple touch it is possible to set the temperature set points for heating and domestic hot water. Thanks to the contextual help, BLUEHELIX SUBLIME directly informs the user of the possible causes of the anomaly while providing the qualified technician with indications on possible solutions to be undertaken. If necessary, thanks to the standard integrated Vodafone Business IoT connectivity, it is possible to directly request the intervention of the authorized technical assistance centre. Even the system pressure is no longer a problem because thanks to the semi-automatic system electroloading function, a simple ''touch'' is enough and the boiler automatically restores the adequate pressure without requiring manual intervention by the user RICH EQUIPMENT OF ACCESSORIES Wired remote control for home comfort management also from Smartphone Available APP for boiler on/off and domestic heating/DHW comfort management remotely via Smartphone (iOS and Android) Maximization of room comfort with modulating regulation of the delivery temperature using the Room Climatic Compensation (CCA) and External Climatic Compensation (CCE) functions It improves the average seasonal efficiency in space heating by +4%. Weekly time programming in 30 minute intervals via app Alarm display also via app Operating modes: Off, Holiday, Automatic, Manual Three modifiable temperature levels: Comfort, Economy, Antifreeze MANAGEMENT THROUGH APP The new FERROLI digital platform makes it possible to manage domestic comfort in an extremely simple and intuitive way and to use the remote connectivity services of the Authorized Assistance Centre. Using the FERROLI SMART CONNECT smartphone app, it is possible to check the operating status of BLUEHELIX SUBLIME and change its settings to obtain the best possible room comfort. Similarly, the innovative EASY SERVICE management platform created for Authorized Assistance Centers allows you to remotely monitor the product, guaranteeing comfort and assistance at all times. HYDRAULIC ACCESSORIES The attention paid to aesthetics for BLUEHELIX SUBLIME has no limits. The boiler is standard equipped with a connection cover matching the product to cover the hydraulic kit (5 pipes + 4 taps). Finally, for the most demanding and design-conscious customers, a complete series of optional flue accessories in a color coordinated with the boiler is available. THE FERROLI THERMOBALANCE TM THERMAL GROUP IN ITS 5 ELEMENTS The combustion cell and the exchanger of BLUEHELIX SUBLIME maximize the functional advantages and the constructive sturdiness. The single-circuit design ensures that any air bubbles in the system do not remain trapped in the exchanger, and makes it as easy as possible to clean it with chemical washing. High flow single circuit stainless steel heat exchanger, resistant to clogging and easy to clean Self-cooled burner door without insulating panel Exclusive special stainless steel hemispherical burner with long-life gasket Intelligent "Gas-adaptive" system derived from industrial boilers, which monitors and self-stabilises combustion as the gas + flue conditions vary THE ENGINE: COMBUSTION CELL The tube that makes up the BLUEHELIX SUBLIME exchanger is made of stainless steel, a material that allows for the creation of an extremely smooth surface, therefore less susceptible to encrusting agents and deposits. THE ENHANCED HYDRAULIC UNIT All models in the BLUEHELIX SUBLIME series are equipped with a 20-plate DHW plate exchanger and a 7.5 mWc boosted heating circulator. The significant increase in the passage section of the 20-plate exchanger compared to a traditional 14 plates) greatly reduces clogging over time, even in the presence of particularly hard water, greatly increasing its average life and minimizing maintenance costs. The enhanced system circulation pump with a head of 7.5 meters allows all BLUEHELIX SUBLIME models to function correctly, delivering all the necessary power even in systems with high head losses (particularly large new systems or old systems with ). MC2 : MULTI COMBUSTION CONTROL The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2 : Multi Combustion Control, the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). Furthermore, the new control electronics allow to reach high modulation fields which can reach up to 1:12 for the 34C model. In this way BLUEHELIX SUBLIME is able to adapt to the effective power required by the system with extreme ease and efficiency, avoiding annoying on/off operations which increase operating costs and reduce the average life of the product. IDENTITY CARD Aesthetics with exclusive lines (Patent) that radically innovate the design concept through the use of tempered glass and curved shapes IoT CONNECT: Vodafone Business advanced connectivity on standard mobile network capable of interacting with the user via App/Sms with smartphone devices, but also via voice messages to any telephone device Wide range of accessories supplied as standard: wired remote control that can be managed via the App, external probe, router for mobile network connectivity, hydraulic connection kits, connection cover Boiler with thick stainless steel primary exchanger, with increased passages to guarantee durability and reduced maintenance Enhanced modulating heating circulator with high head on all models able to adapt even to particularly resistant systems > Standard electrocharging Enhanced domestic hot water exchanger with a high number of plates particularly immune to blockages and capable of maintaining the domestic hot water production capacity constant over time thanks to the combination with the modulating remote control and the external temperature probe, supplied as standard, it reaches the maximum energy efficiency A+(scale from G to A+++) Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:12 (mod. 34C, 1:10 mod. 28C) MC2 : Multi Combustion Control, new combustion system with patented gas-adaptive technology for better adaptability of use to varying gas network conditions Thanks to the standard mobile network connectivity, the user does not need to purchase additional components/contracts for setting up a home wifi network. 7 inch color graphic touch screen display Immediate display of the operating status thanks to the front multicolor LED Particularly suitable for operation in flues that require "heavy" ducting Designed to simplify and facilitate normal maintenance and cleaning operations Simplified electrical wiring that does not require removal of the boiler shell thanks to direct access to the external connection terminal block available on the bottom of the product EASY SERVICE: thanks to the continuous monitoring of the operating parameters, it is possible to activate remote technical assistance contracts through the Authorized Assistance Centers Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

    €2.335,00

  • immagine-1-ferroli-scaldabagno-elettrico-ferroli-calypso-120-ve-verticale-120-litri

    Ferroli Electric water heater Ferroli Calypso 120 Ve Vertical 120 Liters

    NB: IN THE ABSENCE OF THE PRODUCT THE MODEL ISEA SWING 120 liters WILL BE SHIPPED VE Technical features Model: Calypso 120 Vertical Tank capacity: 120L Electric Power: 1500W Heating time: 3h - 39 min dimensions: 115 x 19 cm; 31kg Warranty: 2 years General characteristics CALYPSO BIG LITRAGGI ELECTRIC WALL-MOUNTED WATER HEATERS For indoors The CALYPSO electric water heater is made of high quality steel, with a special powder enamel treatment inside the cylinder, created with advanced electrostatic application techniques and subsequent kiln firing at 850°C for perfect glass porcelain coating of the tank. To keep heat loss to a minimum, CALYPSO has been insulated internally with high density polyurethane foam without CFC content, externally with a polymer coating with high resistance to heat loss. All models are 100% tested to ensure perfect operation at the intended operating pressure. CALYPSO water heaters can boast three safety devices: a hydraulic valve which is activated in the event of overpressure in the internal tank and two automatic overtemperature protection systems. Characteristics: Models with capacities from 50 to 150 litres. Also available in mixed thermo (MT) version. Removable electric resistance in copper Probe thermostatic control. Magnesium anode to protect the tank. 5-bolt flange to ensure sturdiness and ease of periodic maintenance. Temperature level indicator. On/off light. Safety valve calibrated at 8 bar with drain cock and safety screw External manual temperature regulation (vertical models). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    €214,00

  • immagine-1-ferroli-scaldabagno-camera-aperta-ferroli-zefiro-eco-c-14-low-nox-gpl-novita-ean-8056138593060

    Ferroli Open Chamber Water Heater Ferroli Zefiro Eco C 14 Low Nox LPG - New

    Open Chamber Water Heater Ferroli ZEFIRO ECO C 14 Low NOx LPG - NEW Model: Zefiro Eco 14 LPG ERP Class (Class G - A) A Load profile M Nominal heat input (Pn) kW 26.8 Useful power Min / Max kW 9.5 / 23.7 Maximum working pressure 10 bar Sanitary production: Δt 25°C l/min 13.9 Δt 30°C l/min 11.3 Sanitary temperature regulation Min / Max °C 40 / 65 Battery power supply NB: LPG OPERATION THROUGH TRANSFORMATION New Ferroli ECO range EFFECTIVE The ECO range has been designed according to the stringent efficiency parameters of the European ErP Directive. In practice, they are able to produce a lot of hot water at a low cost, respecting the environment and with minimal polluting emissions. They can also be integrated into a solar thermal system with extreme simplicity for maximum efficiency and comfort. EASY ECO water heaters are extremely simple to install and are interchangeable with previous series. Although very compact in size, they have been designed and built in such a way as to have easy access to the internal components for easy maintenance. BEAUTIFUL AND SMART The designers of the ECO project have created a «friendly» aesthetic that can be easily integrated with the most diverse furnishing styles. The knob or button controls have been designed to be easy to use and immediately understood. All Ferroli gas water heaters are equipped with a user interface display. ZEFIRO ECO Wall mounted gas water heater with natural draft and open chamber, low nox type - Copper exchanger - Interface display - Power modulation - Methane / LPG / Propane air - Solar systems - Battery powered STRENGTHS: Copper heat exchanger with finned tubes, externally finished with an aluminum anti-corrosion treatment Modulating heat input and fine adjustment of the outlet hot water temperature Easy and immediate reading display with indicators on the operation of the appliance and the charge of the power supply batteries. Adjustment of power and hot water temperature with comfortable ergonomic knobs Battery powered ADVANTAGES OF ZEFIRO ECO: Available for operation with Natural Gas, LPG and Propane Air (50% air - 50% G31 by means of a specific transformation to be requested from the authorized assistance center at the maximum total price of 30 euros + VAT) Wide range of regulation of hot water temperature and power modulation Compact dimensions and low weight Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

    €247,00

  • Caldaia A Condensazione Ferroli Bluehelix Pro 25c Gpl Completa Di Kit Scarico Fumi - Erp - CaldaieMurali

    Ferroli Ferroli Bluehelix Pro 25c LPG Condensing Boiler Complete With Fume Exhaust Kit - Erp

    Technical features Model : Bluehelix Pro 25C Energy label specifications according to the European ErP directive Heating energy efficiency class: A Sanitary energy efficiency class XL profile: A NOx class : 5 Characteristics of heating/DHW operation: Heating Thermal Power: 25 kW Thermal Power in Sanitary: 27 kW Maximum Heating Power 80°C - 60°C : 24.5 kW Useful Thermal Efficiency 80°C - 60°C: 98% Useful Thermal Efficiency 50°C - 30°C : 106% Domestic hot water production Δt 30°C: 12.9 l/min Domestic hot water production Δt 25°C: 15.5 l/min Energy certification (92/42 EEC): **** Degree of protection: IP X5D Power supply: LPG Dimensions and weight Extremely Compact Dimensions (HxWxD): 600x400x320 mm Weight : 29Kg Ferroli boiler BLUEHELIX PRO Wall-mounted condensing boilers, premixed sealed chamber with instantaneous domestic hot water production BLUEHELIX PRO has been designed to guarantee maximum energy efficiency and performance both in heating and in the supply of domestic hot water thanks to the new bivalent exchanger in Aisi 316 Ti stainless steel. Built to be installed outdoors in partially protected places and equipped with electronics capable of integrating with a solar panel system. New series of compact wall-mounted condensing boilers with instantaneous domestic hot water production This new exchanger integrates the heating circuit and the production of instantaneous domestic hot water in a single element, thus optimizing the phenomenon of condensation. Bluehelix Pro achieves one of the highest energy efficiency of space heating in its category: ηs 94% . Furthermore, when combined with the external probe and the Romeo remote timer control, it reaches system energy class A+ . The Range Bluehelix Pro is available in 2 models, both running on methane and LPG. Both the 25C model and the larger size, 32C, offer large volumes of domestic hot water, quickly, which can be further reduced by activating the "Comfort" function PLUS Product > New bivalent primary exchanger in Aisi 316 Ti stainless steel with “SELFCLEANING” function > High yields in both heating and domestic hot water production > Total premix burner in stainless steel > Electronic flame modulation both in heating and DHW > Digital control panel , complete with hydrometer > Can be combined with the modulating remote timer control . Programmable for one second > High efficiency modulating heating circulator (Erp Ready - Class A) > Refined design and compact dimensions > Casing painted white by anaphoresis with epoxy powders > Ease of access to internal components for any maintenance > 3-star certified comfort in sanitary production according to EN 13203, amended by Reg. 812/2013 > Sliding temperature operation via optional external probe > Digital flame control with three re-ignition attempts in the event of blockage due to lack of flame detection (methane model) > Predisposition for solar systems: prearranged for the production of domestic hot water combined with solar panel systems > Standard by-pass > Place of installation: also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the help of the optional antifreeze heater kit > IPX5D protection index, equivalent to excellent electrical protection of the boiler from liquids and foreign bodies > Achieves one of the highest seasonal space heating efficiency in its category: ηs 94% System energy class A+ , with the combination of the external probe and the Romeo modulating timer control Components The Exchanger The Ferroli design applied to the combined heat exchangers once again stood out for a simple and high-performance solution, made with the best materials Structure The exchanger consists of a concentric spiral without joints or welds. An additional pipe is inserted inside the main spiral - which serves the heating system - for the preparation of domestic hot water. The latter is not linked to the main coil, but remains immersed, in a "bain-marie" in the system fluid Self-Cleaning function The generous cross-section of the exchanger tubes allows for a free, ample passage of water. The serpentine conformation contrasts the deposit of impurities, not only due to the regularity of the path crossed by the water but also due to the "centrifugal" effect impressed on the water itself on the walls of the serpentine. Furthermore, the absence of circuits in parallel, both on the heating and DHW sides, makes any chemical washing operations of the exchanger and the elimination of any air present in the system circuit extremely easy. Full Condensation The integration of both the domestic hot water exchanger and the primary one in a single block reduces the average operating temperatures even during the production of domestic hot water. This favors condensation and gives the boiler high efficiency not only in heating, but also in domestic hot water Material The tube that makes up the Bluehelix Pro exchanger is made of AISI 316 ti stainless steel . It is a so-called austenitic alloy, particularly resistant to corrosion, enriched with the addition of titanium. it is also a material that allows for the creation of an extremely smooth surface, therefore less susceptible to encrusting agents and after-effects Cheap Plus . Ecological. Efficient. Self-Adaptive The low-consumption circulator installed in the Bluehelix Pro has a variable flow rate, with ΔT control. The advantages offered are many, including: • System start-up from cold: faster start-up with full control of the thermal load on the components • Permanent maintenance of the temperature equilibrium conditions, once the set point has been reached • Better operation in limit conditions, reduction of on-of states • Reactivity to variations in the thermal load, an appreciable quality in multi-zone systems Robust Others are the merits attributable to the circulator chosen for Bluehelix Pro: • The PWM signal (pulse width modulation) to the circulator allows extremely rapid intervention times to complete an advanced and complete electronic platform. This results in a drastic reduction of the ON-OFF events of the burner and the circulator • Electronic control of the drive torque at start up with consequent reduction of the risk of blocking. The routine anti-seize cycle is in any case carried out every 24 hours of inactivity • Self-protection function in case of overheating • Less noise All this translates into greater longevity not only of the circulator, but also of the components subject to wear and stress from frequent on-off cycles Panel Boiler Control , Commands and Functions The BLUEHELIX PRO control and management electronics allow the user to customize the operation of the appliance in order to manage the environmental comfort according to one's needs. The key control panel and the simple LCD display make the programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive. Romeo Chronothermostat Remote Control The BLUEHELIX PRO boiler can be combined with a wide range of remote timer controls which allow the appliance to be adjusted and operated remotely. Comfort programming is on a weekly basis, even with a holiday function. Romeo is available with wired or wireless connection With the ROMEO Chronothermostat you can: • Adjust the heating and DHW temperatures • Know the operating status of the boiler • View the temperatures inside and outside the house • Restart the boiler in the event of a temporary block • Program the daily or weekly ambient comfort • Activate/deactivate the heating function via the telephone (dial not supplied) System energy class A+ in combination with the external probe and remote timer control The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings Functions: ECO-COMFORT function: In COMFORT mode, thanks to the particular system for maintaining the temperature of the heat exchanger, the dispensing of domestic hot water becomes even faster and more comfortable. In ECO mode, the production of domestic hot water takes place according to traditional standards. Sliding temperature operation: By installing the “External probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. Antifreeze function: In the event that the temperature in the boiler drops to 5°C, the burner automatically turns on and the circulator is activated in order to protect the appliance from damage caused by freezing. This function is active with the boiler powered by the gas circuit and under electrical voltage. Sun Easy function: BLUEHELIX TECH has been designed to be easily inserted in systems made with the latest technologies. The SUN EASY system, standard on the boiler, makes use of electronics that simplify the combination with both natural and forced circulation solar panels. Through a sensor placed on the DHW circuit, it continuously monitors the temperature of the water coming from the solar panels, foreseeing the ignition of the burner only if the latter drops below the level necessary to guarantee optimal comfort for the user. "SELF-CLEANING" function: Thanks to the "spiral" shape, the passage of domestic water inside the exchanger produces a "centrifugal" self-cleaning effect on the internal walls which tends to remove any limescale deposits. Tangible facts: Regulation 622/2012 provides that all boilers placed on the market from 1 August 2015 are equipped with a low-consumption circulator, otherwise defined as "class A". It is a decision that starts from the consideration of the enormous energy expenditure of the pumps and circulators installed in the various applications. In practice, i.e. by analyzing the impact of the low-consumption circulator integrated in the boiler, it reduces up to 30% of the total electricity consumption of the generator. max consumption standard non-modulating circulator: 0.085 kW max consumption new high efficiency circulator: 0.04 kW Degree days 2500 (average climate zone E) Energy cost: €0.19/kWh Hypothetical annual expenditure at max standard circulator speed: €40.375 Hypothetical annual expenditure at max speed of high efficiency circulator: €11.4 Therefore, with the replacement of standard boilers with Bluehelix Pro, in line with the new ERP regulations, electricity savings of around 30% can be estimated. In reality, the savings will be even greater, since these are modulating circulators, which at minimum power can reach consumption of up to just 3 W Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

    €562,00

  • Caldaia Ferroli A Basamento Bluehelix B S 45 Kw Solo Riscaldamento Metano O Gpl Completa Di Kit Scarico Fumi 0tad5awa - New Erp - CaldaieMurali

    Ferroli Ferroli Floor Standing Boiler Bluehelix BS 45 Kw Natural Gas Or LPG Heating Only Complete With Fume Exhaust Kit 0tad5awa - New Erp

    ATTENTION THE BOILER IS SUPPLIED WITH METHANE. CERTIFIED OPERATION ALSO ON LPG USING THE SPECIAL KIT TO BE REQUESTED IN ADVANCE FROM THE AUTHORIZED SERVICE CENTER OF THE AREA NB: PRODUCT AVAILABLE ON ORDER Ferroli Floor Standing Boiler Bluehelix BS 45 kW for natural gas or LPG heating only complete with Fume Exhaust Kit 0TAD5AWA - New ErP Thermal power 80°C-60°C Min / Max Heating 7.3 / 42.1 Useful thermal efficiency 80°C-60°C 98.0 / 97.8 Emission class Nox class 6 Class A+ in heating BLUEHELIX B on base > STRONG POINTS: It achieves one of the highest seasonal space heating efficiency in its category: ηs 94% (mod. 35 only) in combination with the modulating remote control and the external probe (optional) it reaches the higher efficiency class A+ (scale from G to A+++) (mod. 35 only) Primary heat exchanger in stainless steel Total premix burner in stainless steel with wide modulation range Low consumption modulating heating pump (Erp Ready - Class A) Digital controls with user interface display, multifunctional for easy and correct parameter setting Can be combined with the modulating remote timer control Easily accessible water and gas connections to facilitate the replacement of old generators Fumes discharge with split or coaxial pipes; possibility of left and right side exit, rear > BENEFITS OF BLUEHELIX B: Minimum polluting emissions (class 6 according to EN 15502-1) Sliding temperature operation in combination with the optional external probe Protection function of the exchanger with Δt control Timed circulator anti-blocking Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (only in methane operation) Antifreeze function with standard protection down to -5°C Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

    €2.245,00

  • Caldaia A Camera Aperta Ferroli Divaproject C24 Metano - CaldaieMurali

    Ferroli Open Chamber Boiler Ferroli Divaproject C24 Methane

    Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available In case of unavailability, the new DIVATECH D LNC 24 model will be supplied Technical features Model : Divaproject C24 Power supply: methane Performance Energy efficiency class in heating: C DHW energy efficiency class: A Heating nominal heat output : 7.0 ~ 23.5 kW Heat output : 8.3 ~ 25.8 kW Domestic useful thermal power: 23.5 kW Efficiency : 91 % Maximum production of domestic hot water Δt 25°C : 13.4 l/min Maximum production of domestic hot water Δt 30°C : 11.2 l/min Dimensions and weight Dimensions (HxWxD): 700x400x330 mm Empty weight: 27.0 kg Ferroli Divaproject Boiler Wall mounted boilers with instantaneous DHW production with double exchanger, open chamber, natural draft The Divaproject c24 by Ferroli is the cheapest solution for replacing open chamber boilers. Built to be installed outdoors in partially protected places and prepared for integration with a solar panel system. It has an excellent quality-price ratio and is entirely Made in Italy with a 2-year guarantee. The cheapest in its category Arrangement for solar systems Eco-comfort system for rapid domestic hot water production High efficiency low consumption circulator (class A) Ideal for residential homes up to 120 m2 2 Year Warranty Divaproject is a heat generator for heating and instant domestic hot water production. The series has been designed in each of its components to have top performance in its category while maintaining characteristics of simplicity and compactness. The control electronics allow for easy and functional combination with solar collector systems. The series includes two models: C24 and C30 The boiler is designed to operate on natural gas and LPG or even on propane air by means of a special transformation. The efficiency of Divaproject is the maximum for its category, certified at 3 stars according to the 92/42 EEC Directive for energy classification Components Expansion vessel Combustion chamber Copper primary exchanger Atmospheric burner Sanitary exchanger Modulating gas valve Motorized 3-way valve Boiler control Control panel and functions Divaproject's control and management electronics allow the user to customize the operation of the appliance in order to manage environmental comfort according to one's needs. The control panel with the adjustment knobs makes the programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive Remote control "ROMEO" timer Divaproject boilers can be combined with a wide range of remote timer controls which allow the appliance to be adjusted and operated remotely. The ROMEO series consists of 4 models, respectively with weekly or daily comfort programming and with the possibility of choosing between wired or wireless connection for both With ROMEO you can: Adjust the heating and DHW temperatures Know the operating status of the boiler View the temperatures inside and outside the house Restart the boiler in case of temporary lockout Program the daily or weekly environmental comfort Activate/deactivate the heating function via the telephone The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings. With solar systems Sun Easy function Divaproject boilers have been designed to be easily inserted in systems made with the most recent technologies. The SUN EASY system, standard on the boiler, makes use of electronics that simplify the combination with both natural and forced circulation solar panels. Through a sensor placed on the DHW circuit, it continuously controls the temperature of the water coming from the solar panels, foreseeing the ignition of the burner only if the latter drops below the level necessary to guarantee optimal comfort for the user Comfort and Safety Functions Eco-Comfort function In COMFORT mode, thanks to the particular heat exchanger temperature maintenance system, the delivery of domestic hot water becomes even faster and more comfortable. In ECO mode, the production of domestic hot water takes place according to traditional standards. Antifreeze function Even in stand-by mode, i.e. in the absence of a heat request, if a water temperature of 5°C is detected, it activates the anti-freeze protection by igniting the burner at minimum power, in order to avoid damage due to freezing. Post-circulation device All models are equipped with this particular timed device which allows, after the burner has been switched off in heating mode, to recover all the heat accumulated due to thermal inertia in the exchanger, transferring it to the radiators and therefore to the rooms to be heated Circulation anti-blocking device After 24 hours of inactivity, the boiler circulator is automatically started for about 5 seconds to prevent it from blocking after a long period of inactivity. Strengths > Compact geometry primary heat exchanger entirely in copper > Instant production of domestic hot water with dedicated plate exchanger > Simple and complete control panel, LED user interface > High efficiency low consumption circulator (ErP - Class A) with anti-blocking system > Combustion chamber in anti-corrosion aluminized sheet, internally insulated with ecological fiber and burner in AISI 304 stainless steel > Can be combined with the modulating remote timer control > Casing painted white by anaphoresis with epoxy powders > Compact dimensions and low weight > Modulating heat input both in heating and in DHW production, managed by an electronic microprocessor card > Adjustable post-circulation after the heating phase > ECO/COMFORT system for rapid production of domestic hot water > Predisposition for solar systems : prearranged for the production of domestic hot water combined with solar panel systems > Standard by-pass Product Warranty : The warranty on this item is 24 months from the date of purchase.

    €529,00

  • Caldaia A Gas Ferroli Bluehelix K 50 32 Kw A Condensazione Metano Completa Di Kit Scarico Fumi - New Erp - CaldaieMurali

    Ferroli Ferroli Bluehelix K 50 32 Kw Natural Gas Condensing Gas Boiler Complete With Fume Exhaust Kit - New Erp

    FERROLI BLUEHELIX K 50 32 Kw METHANE CONDENSING GAS BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP Characteristics: Seasonal space heating energy efficiency class A Water heating energy efficiency class A Declared load profile XXL Nominal thermal power 29 kW DHW thermal capacity 32 kW Auxiliary electricity consumption at full load: 0.054 kW Sound power level within 55 dB Dimensions (HxWxD) 800 x 600 x 420 *Certified operation also with LPG using a special kit to be requested from the Authorized Assistance Centre BLUEHELIX K50 32 EFFICIENCY, RATIONALITY AND ROBUSTNESS New series of condensing boilers with which FERROLI intends to satisfy the increasingly stringent limits on energy consumption required by recent regulations. The range of generators has been designed with the new patented AISI 316 TI stainless steel exchanger capable of guaranteeing energy efficiency and performance, both in heating and in the supply of domestic hot water, at the top of its category, in compliance with the new directives ErP for eco-friendly design and labelling. CHARACTERISTICS Boiler body with the new patented primary exchanger in thick AISI 316 TI stainless steel Production of domestic hot water with 50-litre stainless steel domestic hot water storage tank Total premix burner in stainless steel Electronic flame modulation both in heating and DHW Digital control panel Can be combined with the modulating remote timer control Low consumption modulating heating pump (Erp Ready - Class A) Refined design and compact size Casing painted in white by anaphoresis with epoxy powders 3-star certified comfort in sanitary manufacturing according to EN 13203 Sliding temperature operation via optional external probe Digital flame control with three re-ignition attempts in case of operation due to lack of flame detection (methane model) Arrangement for recirculation attachments Standard by-pass Place of installation: also for outdoors in a partially protected place up to - 5 ° C as standard TANGIBLE FACTS max consumption standard non-modulating circulator: 0.085 kW max consumption new high efficiency circulator: 0.04 kW Degree days 2500 (average climate zone E) Energy cost: €0.19/kWh * Hypothetical annual expenditure at max standard circulator speed: €40.375 Hypothetical annual expenditure at max speed of high efficiency circulator: €11.4 Therefore, with the replacement of standard boilers with Bluehelix K 50, in line with the new ERP regulations, electricity savings of around 30% can be estimated. In reality, the savings will be even greater, since these are modulating circulators, which at minimum power can reach consumption of up to just 3 W. The low-consumption circulator installed in the Bluehelix K 50 has a variable flow rate, with ΔT control. The advantages o ered are many, including: - System start-up from cold: faster start-up with full control of the thermal load on the components - Permanent maintenance of temperature equilibrium conditions, once the set point has been reached - Better operation in extreme conditions (e.g. at minimum power), reduction of on-oFF states - Reactivity to variations in the thermal load, an appreciable quality in multi-zone systems ..ROBUST Others are the merits attributable to the circulator chosen for Bluehelix K 50: - The PWM signal (pulse width modulation) to the circulator allows extremely rapid intervention times to complete an advanced and complete electronic platform. This results in a drastic reduction of the ON-OFF events of the burner and the circulator. - Electronic control of the drive torque at start up with consequent reduction of the risk of blocking. The routine anti-seize cycle is in any case carried out every 24 hours of inactivity. - Self-protection function in case of overheating - Less noise All this translates into greater longevity not only of the circulator, but also of the components subject to wear and tear from frequent on-off cycles. COMFORT AND SAFETY The designers have thought of a series of functions capable of guaranteeing the quality of the domestic water, the best delivery of power to the heating system combined with a longer life for the appliance. > SLIDING TEMPERATURE OPERATION With the installation of the “External probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. > ANTI-LEGIONELLA FUNCTION In order to keep the storage cylinder in suitable hygienic-sanitary conditions, the product electronics are able to keep it at a temperature of 65°C at programmable time intervals from one to seven days. > ANTI-BLOCK FUNCTION In order to avoid blockage and consequent damage to the heating circulator and the three-way diverter valve, after a set period of inactivity, the boiler electronics activate operation for a few seconds. > ANTIFREEZE FUNCTION In the event that the temperature in the boiler drops to 5°C, the burner automatically turns on and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. > ECONOMY/COMFORT FUNCTION By activating the appropriate key, heating/temperature maintenance can be excluded by the user (Economy). This makes it possible to reduce fuel consumption during periods of non-use of domestic water Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    €1.670,00

  • Caldaia Ferroli A Condensazione Bluehelix Tech Rrt 30 H Solo Riscaldamento Metano O Gpl Completa Di Kit Scarico Fumi -Novità - CaldaieMurali

    Ferroli Ferroli Condensing Boiler Bluehelix Tech Rrt 30 H Only Natural Gas Or LPG Heating Complete With Fume Exhaust Kit - New

    Ferroli condensing boiler Bluehelix Tech RRT 30 H Heating only METHANE OR LPG Complete with flue gas kit - New Technical features: ERP Class (Class G - A++) A Heating max / min heat input (Hs) kW 30.6 / 6.4 Max / min heat output heating (80/60°C) kW 30 / 6.3 Max / min heat output heating (50/30°C) kW 32.5 / 6.9 Efficiency Pmax / Pmin (80-60°C) (Hi) % 97.9 / 98.0 Efficiency Pmax / Pmin (50-30°C) (Hi) % 106.1 / 107.5 Efficiency 30% 109.5 Max / min heating pressure bar 3 / 0.8 Empty weight kg 28 No. of pieces/pallet no. 12 CNG/LPG CODE 0T3D2BWA STRENGTHS: With attention to aesthetics and silence, it continues the tradition of appreciation of the previous "Bluehelix" series Boiler with thick stainless steel primary exchanger, with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt. A+ System: in combination with the modulating remote control and the external probe (optional) it reaches the upper efficiency class A+ (scale from G to A+++) MC2: Multi Combustion Control, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures) MGR: Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits MGR: Methane: LPG, Propane air Ready through a simple configuration the boiler is able to operate on methane, LPG and propane air without the use of additional conversion kits Exclusive exchanger-burner system with self-cooled door: simplifies maintenance and reduces its cost thanks to fewer parts to replace Sanitary production in combination with storage tank (optional), standard 3-way valve in the boiler Hydraulic connections covered by the boiler casing Large backlit multifunction graphic display for easy and correct parameter setting Standard by-pass BENEFITS OF BLUEHELIX TECH RRT H: Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes FPS: Smoke Protection System. The flue clapet valve inserted as standard on the boiler allows easy connection to pressurized collective flue systems (e.g. in renovations), in accordance with the UNI 7129 standard Designed to simplify and facilitate normal maintenance and cleaning operations Minimum polluting emissions (class 6 according to EN 15502-1) Sliding temperature operation via optional external probe Low consumption modulating heating pump (ErP Ready - Class A) Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (methane model) Place of installation: also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the aid of the optional antifreeze heater kit Free methane/LPG/propaneted air transformation when checking the product and activating the warranty, to be requested from the Authorized Assistance Center The warranty on this item is 24 months from the date of purchase.

    €770,00

  • Caldaia Ferroli A Basamento Bluehelix B 32 K 50 Metano O Gpl Completa Di Kit Scarico Fumi Con Accumulo 50 Lt - New Erp - CaldaieMurali

    Ferroli Ferroli Floor Standing Boiler Bluehelix B 32 K 50 Methane Or LPG Complete With Fume Exhaust Kit With 50 Lt Storage Tank - New Erp

    ATTENTION THE BOILER IS SUPPLIED WITH METHANE. CERTIFIED OPERATION ALSO ON LPG USING THE SPECIAL KIT TO BE REQUESTED IN ADVANCE FROM THE AUTHORIZED SERVICE CENTER OF THE AREA Ferroli Floorstanding Boiler Bluehelix BK 50 30 kW Methane or LPG complete with Fume Exhaust Kit - New ErP Heating/DHW ERP class A Load profile XXL Thermal capacity (PCI) Min Risc. 6.7 KW Thermal capacity (PCI) Max Risc. 29.5 KW Thermal capacity (PCI) Max San. 32KW Useful thermal efficiency 80°c-60°c Pmax % 98.0 Emission class Nox class 5 Boiler capacity 50 litres Domestic hot water production Δt 30°cl/10 195 Heating working pressure Max bar 3 Max DHW operating pressure bar 9 BLUEHELIX BK 50 > EFFICIENCY, RATIONALITY AND ROBUSTNESS New series of condensing boilers with which FERROLI intends to satisfy the increasingly stringent limits on energy consumption required by recent regulations. The range of generators has been designed with the new AISI 316 TI stainless steel exchanger capable of guaranteeing energy efficiency and performance, both in heating and in the supply of domestic hot water, at the top of their category. The Bluehelix B floor-standing range achieves one of the highest energy efficiency of space heating in its category: ηs 94%. Furthermore, when combined with the external probe and the Romeo remote timer control, it reaches system energy class A+. > PLUS PRODUCT COMPONENTS > Boiler body with the new primary exchanger in very thick Aisi 316 Ti stainless steel > Production of domestic hot water with stainless steel storage tank > Total premix burner in stainless steel > Electronic flame modulation both in heating and DHW > Digital control panel > Can be combined with the modulating remote timer control > Modulating heating pump > Refined design and compact dimensions > Casing painted white by anaphoresis with epoxy powders > 3-star certified comfort in sanitary manufacturing according to EN 13203 > Sliding temperature operation via optional external probe > Digital flame control with three re-ignition attempts in the event of blockage due to lack of flame detection > Arrangement for recirculation attachments > Standard by-pass > It achieves one of the highest seasonal space heating efficiency in its category: ηs 94% (excluding mod. BS 45) > System energy class A+, with the combination of the external probe and the Romeo modulating timer control > COMPONENTS OF THE EXCHANGER Ferroli has directed its research and design towards an exchanger that is simple and robust in its structure, using first-rate materials. STRUCTURE The exchanger consists of a simple spiral, without joints or welds. The generous section of the pipes allows a free, wide passage of the system fluid. The serpentine shape contrasts the deposit of impurities. The tube bundle is unique, without further parallel circuits. Since it is not a collector type exchanger, it is impossible for air bubbles to remain in the meanders of the circuits. Furthermore, any chemical washing of the boiler will take place effectively, as there is no possibility that the descaler pump pushes through a free circuit rather than a clogged one. > TANGIBLE FACTS max consumption standard non-modulating circulator: 0.085 kW max consumption new high efficiency circulator: 0.04 kW Degree days 2500 (average climate zone E) Energy cost: €0.19/kWh * Hypothetical annual expenditure at max standard circulator speed: €40.375 Hypothetical annual expenditure max speed high efficiency circulator: 19 € Therefore, with the replacement of standard boilers with Bluehelix, in line with the new ERP regulations, electricity savings of around 30% can be estimated. In reality, the savings will be even greater, since these are modulating circulators, which at minimum power can reach consumption of up to just 3 W > COMFORT AND SAFETY The designers have thought of a series of functions capable of guaranteeing the quality of the domestic water, the best delivery of power to the heating system combined with a longer life for the appliance. > SLIDING TEMPERATURE With the installation of the “External probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. > ANTI-LEGIONELLA In order to keep the storage tank in suitable hygienic-sanitary conditions, the product electronics are able to keep it at a temperature of 65°C at programmable time intervals from one to seven days. > ANTI-LOCKING In order to avoid blockage and consequent damage to the heating circulator and the three-way diverter valve, after a set period of inactivity, the boiler electronics activate their operation for a few seconds. > ANTIFREEZE In the event that the temperature in the boiler drops to 5°C, the burner automatically turns on and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. > ECONOMY/COMFORT By activating the appropriate key, heating/temperature maintenance can be excluded by the user (Economy). This makes it possible to reduce fuel consumption during periods of non-use of domestic water. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

    €2.650,00


You have seen 456 out of 497 products

Recently viewed products

Login

Forgot your password?

Don't have an account yet?
Create account