Discover our exclusive collection of Ferroli boilers, air conditioners and water heaters. Choose comfort and efficiency with our quality products. Reach maximum domestic comfort with Ferroli. Explore our collection today.
Ferroli
Ferroli Ferroli Econcept In St 25 Kw Condensing Built-in Boiler With Stainless Steel Dynamic Accumulation 25 Liters Methane Complete With Smoke Exhaust Kit
OFFER VALID UNTIL STOCKS LAST BUILT-IN BOX TO BE PURCHASED SEPARATELY Technical features Model : ECONCEPT IN ST 25 Product code : 0M7Y4IAA Maximum heat input in heating mode: 25.2 kW Maximum heat output in sanitary mode: 27.0 kW Efficiency (50-30°C) Pmax % 105.4 NOx emissions class: 5 Heating maximum operating temperature: 95°C Heating working pressure: 3 bar Heating expansion vessel capacity: 8 litres Dimensions and weight Dimensions (HxWxD): 1100x700x245 mm Weight : 42.0 Kg MAXIMUM COMFORT IN HEATING AND DOMESTIC HOT WATER DELIVERY ECONCEPT ST/ IN ST are the products with which FERROLI intends to satisfy the new and more selective limits on energy consumption imposed by recent regulations, while still providing maximum comfort in space heating and in the supply of domestic hot water ECONCEPT ST The ECONCEPT ST range has been designed by drawing on the most advanced knowledge available today. The combustion and exchange group makes use of condensing technology while for the production of domestic hot water a dynamic stratification boiler has been adopted, capable of satisfying several users in a constant and continuous manner. The generator is of the sealed chamber and forced draught type. Thanks to a pre-mixed air/gas supply system and the inverted micro-flame ceramic burner, it falls within the 5th class for NOx emissions. The efficiency of ECONCEPT ST is the best in its category. It is in fact certified with 4 stars according to the 92/42 EEC Directive concerning energy classification. The built-in model ECONCEPT IN ST has been designed to offer a solution to space problems. The compactness of the collection allows a wide choice of solutions for installation both inside and outside the home, in partially protected places. The built-in solution is offered in a single 25 kW size and with the same DHW storage tank as the wall-mounted models. ANTI-LEGIONELLA FUNCTION Legionella is a typical form of water contamination caused by bacteria that are particularly harmful to health; they can be shot down bringing the water temperature to a value higher than 60°C. It is for this reason that ECONCEPT ST / IN ST, at least once a week, they heat the DHW storage water up to 65°C regardless of the value set with the thermostat. OPERATION IN SLIDING TEMPERATURE With the installation of the "external probe" kit it is possible to operate the boiler in sliding temperature. This means that without acting on the keys of regulation of the system temperature, the boiler will self-regulate according to the variations in external temperatures. This results in a energy saving while ensuring maximum comfort for the user. ANTIFREEZE FUNCTION Even in stand-by mode (provided with electricity and gas supplies), i.e. in the absence of a request for heat, if ECONCEPT ST / IN ST detects a water temperature of 5°C, activates the anti-freeze protection by igniting the burner at minimum power, in order to avoid damage due to freezing. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€500,00
-
Ferroli Pair of Support Feet for Fan Coil Fan Coil Ferroli Top Fan
PAIR OF SUPPORTING FEET FOR FAN COIL FAN COIL FERROLI TOP FAN
€17,00
-
Ferroli Ferroli Bluehelix Pro S 27c Kw LPG Condensing Gas Boiler Complete With Fume Exhaust Kit - New Erp
OPTIONAL RECESSED ENCLOSURE FERROLI BLUEHELIX PRO S 27 kW CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP Heating ERP class: A Healthcare ERP class: A Load profile: XL Heating capacity (PCI) Min / Max Heating 5.3 / 25.2 Heating power 80°C-60°C Min / Max Heating 5.2 / 24.6 kW Useful thermal efficiency 80°C-60°C Pmax % / Pmin % 98.3 / 97.3 Domestic hot water production Δt 30°C 12.7 l/min Heating working pressure Max / Min bar 3 / 0.8 Empty weight kg 32 Dimensions (HxWxD): 700x420x260 mm BLUEHELIX PRO S SMALL FOOTPRINT, GREAT PERFORMANCE ... FULL CONDENSATION BLUEHELIX PRO S has been designed to guarantee maximum energy efficiency and performance both in heating and in the supply of domestic hot water thanks to the new bivalent exchanger in Aisi 316 Ti stainless steel. This new exchanger integrates the heating circuit and the production of instantaneous domestic hot water in a single element, thus optimizing the phenomenon of condensation. The galvanized sheet casing, supplied separately from the boiler body, has been designed to facilitate access to the hydraulic connections and to allow the smoke ducts and air intake pipes to exit on each side of the same. Bluehelix Pro S achieves one of the highest energy efficiency of space heating in its category: ηs 94% . Furthermore, when combined with the external probe and the Romeo remote timer control, it reaches system energy class A+ . Strengths: - Achieves one of the highest seasonal space heating efficiency in its category: ηs 94% - A+ SYSTEM : in combination with the Romeo modulating remote timer control and the external probe - Primary heat exchanger in thick Aisi 316 Ti stainless steel with integrated sanitary production (dual stainless steel heat exchanger) - Total premix burner in stainless steel - Digital control panel - Electronic flame modulation both in heating and DHW - Can be combined with the modulating remote timer control - Large backlit multifunction graphic display for easy and correct setting of the parameters - Standard by-pass Advantages: - Exchanger with "SELF-CLEANING" function which reduces limescale deposits inside the DHW circuit - High yields both in heating and in sanitary production - Ease of access to internal components for any maintenance - ECO function in DHW for greater savings in the period of low use of hot water - 3-star certified comfort in sanitary production according to EN 13203, amended by Reg. 812/2013 - Sliding temperature operation via optional external probe - Low consumption modulating heating pump (Erp Ready - Class A) - Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (methane model) - Predisposition for solar systems : prearranged for the production of domestic hot water combined with solar panel systems - Certified operation also with propane air (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center (max total price of 30 euros + VAT) - Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available. Functions: ECO-COMFORT function : In COMFORT mode, thanks to the particular system for maintaining the temperature of the heat exchanger, the dispensing of domestic hot water becomes even faster and more comfortable. In ECO mode, the production of domestic hot water takes place according to traditional standards. Sliding temperature operation : With the installation of the “External probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. Antifreeze function : In the event that the temperature in the boiler drops to 5°C, the burner automatically turns on and the circulator is activated in order to protect the appliance from damage caused by freezing. This function is active with the boiler powered by the gas circuit and under electrical voltage. Sun Easy function : BLUEHELIX PRO S has been designed to be easily inserted in systems made with the latest technologies. The SUN EASY system, standard on the boiler, makes use of electronics that simplify the combination with both natural and forced circulation solar panels. Through a sensor placed on the DHW circuit, it continuously monitors the temperature of the water coming from the solar panels, foreseeing the ignition of the burner only if the latter drops below the level necessary to guarantee optimal comfort for the user.
€660,00
-
Ferroli Offer Fan Coil Fan Coil Ferroli Top Fan Plus Mod Vm-B 15 + Free Switch Cm-F
COMPLETE WITH CM-F ON/OFF CABINET SWITCH OFFER Fan Coil Fan Coil Ferroli Top Fan Plus Mod VM-B 15 + Free CM-F Switch Power 2.8 kW Dimensions (HxWxD): 690x554x220 mm; 14 Kgs It is recommended for rooms up to 20 m2 and can be installed on the wall or ceiling. TOP FAN PLUS Consisting of a fan, a heat exchange element and a filter, fan coil units are ideal machines for summer air conditioning and winter heating of the house and any room. Fed with chilled water from a cooler, they make the air in the room fresh, dry and clean in a very short time and with great energy efficiency; fed with hot water from a heat pump or boiler, they provide clean and economical heat during the winter season. Series with centrifugal fan, available in 9 sizes and three versions: VM-B with casing for vertical and horizontal installation and suction from below VM-F with casing for vertical and horizontal installation and front suction VN without casing for vertical and horizontal installation Characteristics: Cover cabinet obtained by integrating parts in plastic material and parts in galvanized sheet metal, oven painted with epoxy powders Supporting structure in galvanized steel Finned pack heat exchange coil with aluminum fins and copper pipes, brass manifolds specially designed to guarantee low pressure drops Air filter easy to remove and clean, regenerable by washing or blowing Fan unit with three-speed motor and aluminum impellers Wide range of controls both to be installed on the machine and remote on the wall New version with infrared remote control SWITCH: It has a selector for the Summer / Off / Winter function, while the second selects the Min / Med / Max fan speed. Available in two different versions: - for installation on CM-F cabinet - for CMR-F remote installation Two series of panels are available for this type of installation: ON THE MACHINE for installation of the fan coil on the floor (models VM-B, VM-F), REMOTE ON THE WALL for installation of the fan coil on the ceiling (models VM-B, VM- F) or false ceiling (model VN). Each of the series includes three types of control, switch, basic thermostat and advanced thermostat. NEW (OPTIONAL) REMOTE CONTROL Infrared remote control (for all sizes and versions) with liquid crystal display complete with support bracket for wall mounting, which allows the following functions: Power on Power off Operating modes (Hot/Cool/AutoChange Over/Ventilation only - presence of valves required-) Fan speed (Max/Med/Min/Auto) Set point temperature Timer setting °C or °F temperature scale setting VISIBLE RECEIVER Located on the front panel of the unit, it is complete with Timer led (yellow), operating led (green) and emergency ON/OFF and reception zone key. The system completes with the card inside the unit. The system is supplied already installed and tested in the company. WALL-MOUNTED RECEIVER (FLUSH MOUNTING) The receiver is supplied in the case of recessed units and is positioned visible on the false ceiling. It is complete with Timer led (yellow), operating led (green) and button for emergency ON/OFF and reception area. It is supplied with a multipolar cable (max length 0.8 metres) for rapid connection and with the electronic board to be installed on the unit. It can be removed from the machine; the testing of the system takes place in the company while the positioning of the receiver is the responsibility of the installer. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€169,00
-
Ferroli Pellet Boiler Ferroli Model Naturfire 35 Hr 34.4 Kw - DHW Optional
Technical features Model: Naturfire 35 HR Product code: L40GABKA Energy class: A+ Thermal power 34.4 kW Thermal power to water [Pnom] - reduced [Prid] kW 32.4-5.78 Efficiency at Pnom - Prid % 94.18-90.14 Chimney draft Pa 10-14 Fume outlet diameter mm 100 Power supply: 230V - 50Hz Tank capacity Kg 68 Thermal camera capacity 30 l Weight 275Kg Dimensions HxWxD: 1300x700x698 mm General characteristics Pellet boilers Respect for the environment is achieved by keeping man in balance with nature's resources. This is possible only with the use of cutting-edge technologies in terms of efficiency and with the use of sustainable energy sources. Ferroli, which has always been sensitive to ecological issues, has identified the best synthesis between these two needs with the range of its heat generators that work with wood pellets. The sustainable use of forests makes an important contribution to limiting global warming: woody biomass is a biofuel with zero impact in terms of CO2 emissions. Savings with zero impact The most recent studies on the sustainability and convenience of various fuels available on the market show that pellets are currently the most convenient choice. In addition to ensuring considerable savings on the use of more traditional fossil fuels such as LPG, methane and diesel, it has zero impact in terms of CO2 emissions. The pellet is made up of remains from wood processing and therefore does not require the felling of woods and forests for its production. Its combustion residues are completely harmless to the environment as they are free from binders, additives, paints and other chemical products. Sky-high performance - Top certifications FERROLI boilers are recognized and certified among the most performing machines available on the market today, they are in fact approved: to the highest class ( CLASS 5° ) for the European reference standard EN 303-2015 they have been certified in class A+ according to the very recent European Directive called EcoDesign have obtained the score of 3 STARS * from the ARIA PULITA voluntary certification. Clean Air Certification is a second-party voluntary certification scheme that applies to domestic wood and pellet-burning appliances and biomass boilers up to 35 kW of power. The NATURFIRE series generator was submitted to the examination of a committee coordinated by AIEL made up of experts from ENAMA, ENEA, LEGAMBIENTE and Unione Nazionale dei Consumatori, i.e. subjects strongly interested and involved in the fields of environmental protection, air quality and of consumer protection. The stars represent the classification of the appliances according to the Aria Pulita certification to guarantee lower emissions, higher yields and lower costs. A single star indicates a device that meets the requirements for placing on the market. Looking at high quality products, Aria Pulita non A+ certifies products with a single star. 2 stars indicate stoves, inserts and boilers that reduce dust emissions by 40% in the case of pellets and 46% in the case of wood compared to 1-star appliances. 3 stars indicate stoves, inserts and boilers, both wood-burning and pellet-burning, which guarantee 60% reduced dust emissions compared to 1-star appliances. 4 stars indicate stoves, inserts and boilers, both wood-burning and pellet-burning, which guarantee 70% reduced dust emissions compared to 1-star appliances Comfort with full pockets - tax deduction - thermal energy account 2.0 Tax deduction: With the 2017 budget law (law n. 232 of 11 December 2016) both the 65% tax deduction for energy efficiency interventions in buildings and the 50% deduction for building renovations. The facilitation consists of a deduction from Irpef or Ires and is granted when interventions are carried out that increase the level of energy efficiency of existing buildings. You will get the tax deduction of 50% of the amount paid to purchase a new pellet or wood stove, a pellet boiler or a pellet insert in 10 annual installments. Conto Energia Termico 2.0 Incentives to replace an old device with a new one that is more efficient and less polluting. In force since 31 May 2016. The delivery mechanism on the current account (as for photovoltaics) can be summarized as follows: - The incentive covers up to 65% of the costs incurred for the purchase and installation of the new appliance; - Very interesting incentive values, paid in just 2 years (< 35 kW) - Multiplicative bonuses for more ecological pellet systems (reduced emissions) - Encourages the replacement of biomass, coal, fuel oil systems - Replacement of LPG systems incentivized only for agroforestry companies - Biomass is the technology most incentivized by the Energy Bill - Incentive capacity: 900 million total (of which 200 for the public sector) Naturfire Pellet-operated heat generator with fully automated internal burner power supply Completely wetted steel heat exchanger and flue pipes Suction air-flue gas circuit created with a fan downstream of the burner, with variable number of revolutions Standard electronics capable of managing environmental comfort, the production of domestic hot water and the main components of the heating system Complete and functional optional accessories: * Kit for the production of DHW with external or instantaneous storage * Accessories for generator safety and protection * 250 kg pellet tank that can be combined with all models complete with gearmotor and loading auger * Remote timer control with touch panel * App for remote control of the appliance and room comfort via smartphone Approval: * Class 5 according to the UNI EN 303-5 2012 standard * 3 Stars according to the voluntary certification ARIA PULITA* Energy Class A+ Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€3.640,00
-
Ferroli Ferroli Proteo 900 Aluminum Radiator Radiator From 4 To 10 Elements Center Distance 800 Mm Center Distance 800 - 4 Elements
Aluminum radiator Ferroli PROTEO from 4 to 10 elements center distance 800 mm Proteus model Wheelbase 800 From 4 to 10 items PROTEUS Design and ease of installation The particular care in designing the shapes of the aluminum elements has made it possible to create an object that is both simple and elegant and that can be easily inserted into any type of furniture. The small size of the elements makes the battery extremely light, easy to transport and can be installed even by a single person. Maximum yield and low thermal inertia A careful study of the shapes has made it possible to obtain particularly effective convective exchange fins, with one of the highest thermal yields on the market. The special aluminum alloy used and the limited water content per element are synonymous with low thermal inertia and allow the system to become fully operational more quickly. Finishing and supply The radiators are painted with polymerised epoxy resin (RAL 9010). The batteries can be supplied from a minimum of 2 to a maximum of 12 assembled elements, protected by four thick cardboard corners wrapped in a retractable nylon cover Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 10 years from the date of purchase.
€76,00 - €160,00
-
Ferroli Electric water heater Ferroli Calypso 100 Ho Horizontal 100 Liters
Technical features Model: Calypso 80 HO Horizontal Tank capacity: 100 litres Electric Power: 1500W Load profile : L ERP class : C Heating time (20+55°C) : 3h - 5 min Empty weight : 28 kg Warranty: 2 years CALYPSO MEDI LITRAGGI ELECTRIC WALL-MOUNTED WATER HEATERS For indoors The CALYPSO electric water heater is made of high quality steel, with a special powder enamel treatment inside the cylinder, created with advanced electrostatic application techniques and subsequent kiln firing at 850°C for perfect glass porcelain coating of the tank. To keep heat loss to a minimum, CALYPSO has been insulated internally with high density polyurethane foam without CFC content, externally with a polymer coating with high resistance to heat loss. All models are 100% tested to ensure perfect operation at the intended operating pressure. CALYPSO water heaters can boast three safety devices: a hydraulic valve which is activated in the event of overpressure in the internal tank and two automatic overtemperature protection systems. Characteristics: Models with capacities from 50 to 150 litres. Also available in mixed thermo (MT) version. Removable electric resistance in copper Probe thermostatic control. Magnesium anode to protect the tank. 5-bolt flange to ensure sturdiness and ease of periodic maintenance. Temperature level indicator. On/off light. Safety valve calibrated at 8 bar with drain cock and safety screw Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€184,00
-
Ferroli Electric water heater Ferroli Model Calypso Smart 120 Ho Horizontal Liters
Electric water heater Ferroli Model Calypso Smart Ho 120 liters Horizontal Technical features Model : Calypso Smart 120 HO Tank capacity : 120 Electric Power: 1500 W Heating time 3h - 39 min Load profile : L ERP class : C Temperature regulation range 40-80 °C Ho Horizontal installation Power Source 220-240V 50/60Hz Annual Electricity Consumption (AEC) 1251 Acoustic power level 15 db Smart controls Code E510B7KA Warranty : 2 Years Dimensions and weight : Height/Width 995mm Maximum diameter 438 Empty weight 35kg Calypso Smart Medium Liter Electric Water Heaters Electric storage water heaters with very high efficiency, vertical and horizontal development with capacities from 50 to 150 litres. Endowed of : Electronic control of the '' SMART '' type able to optimize consumption according to the user's needs Control panel with luminous LEDs for reading the operating temperatures and operating status and convenient buttons for managing the water heater Magnesium anode to protect the tank 5-bolt flange to ensure sturdiness and facilitate periodic maintenance Safety valve set at 8 bar Supplied with three-pole electric cable without plug Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€279,00
-
Ferroli Ferroli Bluehelix Top Rrt K 50 34c Methane or LPG Condensing Boiler Complete with Fume Exhaust Kit Cod. 0t3t3awa Low Nox - New
ATTENTION Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits. For info, contact the local authorized assistance center in advance Ferroli Bluehelix TOP RRT K 50 34C methane or LPG condensing boiler Complete with Smoke Exhaust Kit cod. 0T3T3AWA low NOx - NEW Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XXL Class A Characteristics of heating/DHW operation: Heating max / min heat input (Hs) kW 34 / 7.1 Heating power max / min heating (80/60°C) kW 30 / 6,3 Max DHW heat input (Hi) kW 34.7 Min DHW heat input (Hi) kW 6.4 Max / min DHW thermal power kW 34.0 / 6.3 NOx emission class (EN 15502-1) - 6 Max working pressure heating bar 3 Sanitary flow rate ∆t 30°C l/10min 195 Protection degree (IEC 60529) IP X5D Supply voltage V/Hz 230V / 50Hz BLUEHELIX TOP RRT K 50 BLUEHELIX TOP RRT K 50... THE EVOLUTION IS COMPLETE This range of generators is equipped with the tested primary heat exchanger in stainless steel and a 50-litre domestic hot water storage tank, also in stainless steel. Designed and built according to the new ErP directives for eco-compatible design and labelling, BLUEHELIX TOP RRT K 50 is at the top of its category. BLUEHELIX TOP RRT K 50 achieves one of the highest energy efficiency of space heating in the boiler category: ηs 94% (Class A ErP, scale from G to A++). Furthermore, when combined with the external probe and the Romeo remote timer control or the new Connect control, it reaches system energy class A+ (scale from G to A+++). TOP EFFICIENCY EVEN ON OLD SYSTEMS (REPLACEMENTS) The THERMOBALANCE™ heat exchanger of BLUEHELIX TOP RRT K 50 (fig. A) compared to the more classic and widespread steel exchanger (fig. B), abandoned in favor of the evolution towards the primary steel exchanger used in the models Bluehelix (2012 -> ). This geometry allows the heat exchanger of the THERMOBALANCE heating unit to operate almost at maximum design efficiency even in conditions of partial blockage, while with the same amount of deposits and sediments (e.g. due to installation on old systems) the exchanger in fig . B tends to block up much faster in the part in contact with the flame due to the reduced passage area of the fluid, in which a real barrier of deposits * is formed which hinder the heat exchange and reduce the efficiency beyond below the nominal values. INNOVATIVE THERMAL GROUP FERROLI THERMOBALANCE TM IN ITS 5 ELEMENTS Ferroli has oriented the design of the combustion cell and the exchanger of BLUEHELIX TOP RRT K 50 in order to maximize the functional advantages and the constructive sturdiness, as well as the simplicity of maintenance: the single-circuit design means that any air bubbles in the system do not remain trapped in the exchanger, and facilitates cleaning with chemical washing as much as possible, unlike spiral exchangers with double parallel circuit (more common) in which if only one of the circuits is blocked, chemical washing is much more laborious. THE ENGINE The tube that makes up the BLUEHELIX TOP RRT K 50 exchanger is made of stainless steel, a material that allows for the creation of an extremely smooth surface, therefore less susceptible to encrusting agents and deposits. TOP QUIETNESS The particularly careful design of BLUEHELIX TOP RRT K 50 has made it possible to achieve significant values in terms of silence and acoustic comfort, so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. . Even the boiler on/off transients have been optimized as a function of acoustic comfort, so that the customer will no longer have the hassle of understanding whether the boiler is on or off from its noise as with older generations of boilers. The planning also took care of the design, creating a precious mantle in 3 removable pieces, which descends to cover the pipe connections. THE BOILER CONTROL The control and management electronics allow the user to customize the operation of the appliance in order to manage the environmental comfort according to one's needs. The key control panel and the simple LCD display make the programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive. Thanks to the remote connection via bus, this can also be done directly from the remote control. The card is protected by an easily accessible fuse thanks to the dedicated flap and the electrical connections benefit from a robust and large box, with easily accessible connectors and numerous cable ties. The boiler is also set up to connect a second room thermostat to the dedicated terminals to manage multi-zone mixing systems. MC2 The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2: Multi Combustion Control, the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). EASY MAINTENANCE At the time of the first maintenance, the technician can appreciate the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the "Thermobalance"TM thermal group allows maintenance to be carried out with maximum precision and speed. Some examples: Internal accessibility is favored by the 3-piece mantle with removable side panels. The electrical box of the electronic board can be easily rotated on the chassis leaving free access to the internal parts. The fan, offset from the burner and placed underneath, must not be disassembled to access the steel burner-exchanger group. The burner door is totally self-air-cooled and therefore does not require an insulating panel, avoiding the risk that this could be damaged or broken during disassembly for cleaning. The burner can be disassembled by loosening just 3 bolts leaving free access to the stainless steel exchanger. The exchanger with extra-large passages is designed to challenge the hardest waters and is easy to clean thanks to the non-collectorised single-pipe circuit. The domestic hot water inlet filter can be extracted very easily directly from the inside without having to remove the boiler hydraulic connections SIMPLIFIED REPLACEMENT The new boiler can also be installed with 50mm diameter ducting outlets. Particularly important in the replacement market in the frequent case of collective flues that require "heavy" ducting where it is necessary to have a high fume expulsion capacity even with reduced diameters. STOP AND GO FUNCTION With the use of sanitary taps with mixing, short or very short dispensing for quick rinses involves the start of the boiler ignition procedure which usually ends immediately. The continuation of these "false starts" can, in the long run, compromise the average life of the product. For this reason BLUEHELIX TOP RRT K 50 provides an electronic parameter through which it is possible to delay burner ignition (Stop and Go) by activating it only in the face of actual withdrawals of domestic hot water SUN EASY FUNCTION BLUEHELIX TOP RRT K 50 has been designed to be easily inserted into systems built with the latest technologies. The SUN EASY system makes use of electronics that simplify the combination with solar panels with both natural and forced circulation. Through a sensor placed on the DHW circuit, it continuously monitors the temperature of the water preheated by the solar panels, foreseeing the ignition of the burner only if the latter falls below the level necessary to guarantee optimal comfort for the user SANITARY ECO-COMFORT FUNCTION In ECO operation, the production of domestic hot water takes place according to traditional standards, allowing for energy savings during periods of non-use. In COMFORT mode, thanks to the particular heat exchanger temperature maintenance system, the delivery of domestic hot water becomes even faster and more comfortable. Achieving maximum comfort certified 3 stars (EN 13203). The efficiency and the load profiles according to the ErP directive are at the top of the category: mod. 28 / A - XL | mod. 34/A - XXL MODULATION RANGE The new control electronics allow to reach high modulation fields which can reach up to 1:12 for the 34 K 50 model (1:10 for the 28 K 50). In this way BLUEHELIX TOP RRT K 50 is able to adapt to the effective power required by the system with extreme ease and efficiency, avoiding annoying on/off type operations which increase operating costs and reduce the average life of the product. PRODUCT ADVANTAGES Boiler with thick stainless steel primary exchanger, with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt A+ : combined with the modulating remote control and the external probe (optional) it reaches the higher efficiency class A+ (scale from G to A+++) Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:12 (mod. 34, 1:10 mod. 28) MC2 : Multi Combustion Control, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures) > MGR: Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits Exclusive exchanger-burner system with self-cooled door: simplifies maintenance and reduces its cost thanks to fewer parts to replace. Domestic hot water production with 50 liter stainless steel storage tank Arrangement for recirculation connections (present in the accessory: connection connection kit) Hydraulic connections covered by the boiler shell > Standard by-pass Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes FPS: Smoke Protection System. The flue clapet valve inserted as standard on the boiler allows easy connection to pressurized collective flue systems (e.g. in renovations), in accordance with the UNI 7129 standard Designed to simplify and facilitate normal maintenance and cleaning operations Anti-legionella function with programmable timing Timed anti-blocking for circulator and three-way valve 3-star certified comfort in sanitary manufacturing according to EN 13203 Minimum polluting emissions (class 6 according to EN 15502-1) Sliding temperature operation via optional external probe Low consumption modulating heating pump (ErP Ready - Class A) Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (methane model) Free methane/LPG/propaneted air transformation during the initial product check and activation of the conventional guarantee, to be requested from the Authorized Assistance Center Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€2.075,00
-
Ferroli Ferroli Condensing Boiler Bluehelix Hitech Rrt 24 C Complete With Low Nox Methane Or LPG Flue Kit - New
Ferroli condensing boiler Bluehelix HiTech RRT 24 C complete with low NOx methane or LPG fume exhaust kit - New Heating ERP Class A Healthcare ERP Class A XL load profile Heating capacity max / min kW 20.4 / 3.5 Max DHW heat input (Hi) kW 25.0 Max / min DHW thermal power kW 24.5 / 3.4 Yield 30% % 109.7 NOx emission class (EN 15502-1) - 6 Heating expansion vessel capacity 8 litres Sanitary flow rate ?t 25°C l/min 14 Protection degree (IEC 60529) IP X4D Dimensions HxWxD mm 700x420x320 Bluehelix HiTech RRT The new user interface with «capsense» technology, without mechanical keys and equipped with a 2.8'' graphic display, allows the user to interact with the product easily and extremely simply. Thanks to the energy efficiency of the space heating ηs 94% among the highest in the category (Class A ErP, scale from G to A++) and to the combination with the Connect remote control, able to read the external temperature directly from the internet, reaches the system energy class A+ (scale from G to A+++). Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:10 (1:10 mod. 34 C, 1:9 mod. 28 C, 1:7 mod 24 C). Thanks to the "Hydrogen plug-in" system, one of its most important innovations, it is already able to self-regulate to work with mixtures of natural gas and hydrogen, which will soon arrive in Europe, to combat global warming. Designed to fully satisfy the requests for a "robust" product from every point of view thanks to the high-passage primary exchanger capable of guaranteeing maximum efficiency and reliability over time also, and not only, as a replacement for old generators in particularly dirty systems . Silence at the top The particularly careful design of BLUEHELIX HITECH RRT has made it possible to achieve significant values in terms of silence and acoustic comfort, so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. It will be difficult to realize whether the boiler is on or off from its noise, as on older generations of boilers, because even the on/off transients have been optimized according to acoustic comfort. The planning also took care of the design, creating a precious mantle in 3 removable pieces, which descends to cover the pipe connections Characteristics Boiler with thick stainless steel primary exchanger , with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt thanks to the combination with the CONNECT modulating remote control and the reading of the external temperature directly from the internet, it reaches the maximum energy efficiency A+ (scale from G to A+++) Class 6 NOx: already in line with the provisions of the ErP regulation from 26.09.2018 (NOx emissions < 56mg/kWh) MC2: Multi Combustion Control, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures) MGR: Methane LPG Ready, through a simple configuration the boiler is able to operate on both methane and LPG without the use of additional conversion kits Exclusive exchanger-burner system with self-cooled door (without insulators): simplifies maintenance and reduces its cost thanks to fewer perishable parts Instantaneous production of DHW with dedicated DHW plate heat exchanger (only for version C) Hydraulic connections covered by the boiler shell Large backlit multifunction graphic display for easy and correct parameter setting Standard by-pass Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:10 (1:10 mod. 34 C, 1:9 mod. 28 C, 1:7 mod 24 C). Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes FPS: Smoke Protection System. The flue clapet valve inserted as standard on the boiler allows easy connection to pressurized collective flue systems (e.g. in renovations), in accordance with the UNI 7129 standard Designed to simplify and facilitate normal maintenance and cleaning operations Predisposition for solar systems: prepared for the production of domestic hot water combined with solar panel systems ECO function in DHW for greater savings in the period of low use of hot water (only for version C) Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (only for methane operation) Place of installation: also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the help of the optional antifreeze heater kit Boiler control The new user interface with ''capsense'' technology, without mechanical keys and equipped with a 2.8'' graphic display, allows the user to interact with the product easily and extremely simply, customizing the operation of the appliance in so as to manage the environmental comfort according to one's needs. Thanks to the remote connection via bus, this can also be done directly from the CONNECT remote control, even via smartphone. The boiler is also set up to connect a second room thermostat to dedicated terminals to manage multi-zone systems. TOP EFFICIENCY Even on old systems (replacements) The BLUEHELIX HITECH RRT heat exchanger THERMOBALANCE™ (fig. A) compared to the more classic and widespread steel exchanger (fig. B) also used in the past by the Ferroli Group exclusively on a small series of boilers produced for the market English, and then immediately abandoned in favor of the evolution towards the proprietary steel exchanger used in the Bluehelix models (2012 -> ). This geometry allows the heat exchanger of the THERMOBALANCE heating unit to operate almost at maximum design efficiency even in conditions of partial blockage, while with the same amount of deposits and sediments (e.g. due to installation on old systems) the exchanger in fig . B tends to block up much faster in the part in contact with the flame due to the reduced passage area of the fluid, in which a real barrier of deposits * is formed which hinder the heat exchange and reduce the efficiency beyond below the nominal values MC2 Multi Combustion Control The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2 : Multi Combustion Control, the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). EASY MAINTENANCE Trouble-free maintenance At the time of the first maintenance, the technician can appreciate the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the "Thermobalance"TM thermal group allows maintenance to be carried out with maximum precision and speed. Some examples: Internal accessibility is favored by the 3-piece mantle with removable side panels. The electrical box of the electronic card can be easily extracted from the chassis leaving free access to the internal parts. - The fan, offset from the burner and placed underneath, must not be disassembled to access the steel burner-exchanger group. The burner door is totally self-air-cooled and therefore does not require an insulating panel, avoiding the risk that this could be damaged or broken during disassembly for cleaning. The burner can be disassembled by loosening just 3 bolts leaving free access to the stainless steel exchanger. The exchanger with extra-large passages is designed to challenge the hardest waters and is easy to clean thanks to the non-collectorised single-pipe circuit. The domestic hot water inlet filter can be extracted very easily directly from the inside without having to remove the boiler hydraulic connections. Any disassembly and replacement of the plate heat exchanger takes place simply by removing the two Allen bolts accessible from the front Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€880,00
-
Ferroli Electric water heater Ferroli Model Calypso Smart 100 Ho Horizontal Liters
Electric water heater Ferroli Model Calypso Smart Ho 100 liters Horizontal Technical features Model : Calypso Smart 100 HO Tank capacity : 100 Electric Power: 1500 W Heating time 3 h - 5 min Load profile : M ERP class : B Temperature regulation range 40-80 °C Ho Horizontal installation Power Source 220-240V 50/60Hz Annual Electricity Consumption (AEC) 1251 Acoustic power level 15 db Smart controls Code E410B7KA Warranty : 2 Years Dimensions and weight : Height/Width 755mm Maximum diameter 438 Empty weight 22kg Calypso Smart Medium Liter Electric Water Heaters Electric storage water heaters with very high efficiency, vertical and horizontal development with capacities from 50 to 150 litres. Endowed of : Electronic control of the '' SMART '' type able to optimize consumption according to the user's needs Control panel with luminous LEDs for reading the operating temperatures and operating status and convenient buttons for managing the water heater Magnesium anode to protect the tank 5-bolt flange to ensure sturdiness and facilitate periodic maintenance Safety valve set at 8 bar Supplied with three-pole electric cable without plug Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€205,00
-
Ferroli Ferroli Gas Water Heater From External Externo 22 Ng Liters Low Nox Methane
Ferroli gas water heater for outdoor use EXTERNO 22 NG liters low NOx methane Energy class A XL load profile Nominal heat input Max / Min kW 44 / 8.5 Thermal power Max / Min kW 38.3 / 7.6 NOx class (according to EN 15502) 6 Maximum working pressure Max / Min bar 10 / 0.2 Sanitary production Δt 25°C Δt 30°C l/min 22 / 18.3 Power supply V/Hz 230 / 50 Electrical protection degree IP X5 Dimensions HxWxD mm 572x394x180 external Wall-mounted Low NOx gas water heater for outdoor installations without smoke ducts EXTERNO is an A3 type instantaneous gas water heater with front flue outlet and suitable for outdoor installation without flue gas evacuation ducts. The water heater is equipped with a combustion unit which, in combination with a LOW NOx type micro-flame burner, guarantees pollutant levels below the parameters imposed by the severe limitations of the European ErP directive. EXTERNO has been designed exclusively for outdoor installations such as on balconies, attics or dedicated shafts. The casing is made up of two molded and IPX5D insulated shells and the water circuit inside the appliance is protected with electrical resistances, fitted as standard, and managed by the electronic board. These measures allow EXTERNO to function correctly up to extreme conditions of -20°C. All appliances are supplied as standard with remote timer control (and 10-metre long connection cable) equipped with a large interface display and simple control keys, to make adjustment easy and intuitive. SOLAR FUNCTION All models in the EXTERNO range can be easily installed in combination with a solar thermal system for the production of domestic hot water. The hydraulic circuit with its components have been designed to be able to operate even at the high temperatures of the water leaving the panels. ECO FUNCTION Through the remote control, it is possible to activate the ECO function. When operating in ECO mode, the EXTERNO water heater will automatically set the hot water outlet temperature to 42°C and at a reduced power of approximately 75% of the nominal power CHILD PROTECTION If the hot water temperature is set to a very high value, each time the water heater is switched OFF, the delivery temperature will automatically return to 48°C so that the next withdrawal takes place in complete safety. The EXTERNO series of water heaters does not have controls on the machine. The DHW temperature control, setting and regulation functions are delegated to a remote control supplied as standard, complete with connection cable. The interface display and the control keys have been designed to make using the control as simple and intuitive as possible. In the event of an anomaly and/or malfunction of the water heater, the indication on the display is accompanied by an audible signal. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€684,00
You have seen 420 out of 497 products