Discover our exclusive collection of Ferroli boilers, air conditioners and water heaters. Choose comfort and efficiency with our quality products. Reach maximum domestic comfort with Ferroli. Explore our collection today.
Ferroli
Ferroli Ferroli Thermostat With Display For Installation On Tefc Unit For Jolly 3v
Ferroli Thermostat with display for installation on TEFC unit for Jolly 3v Allows you to: 1. Turn the unit on or off 2. Choose the hot-cold operating mode 3. View the room temperature and set the setpoint 4. Select the fan speed 5. Set a timed on or off 6. Set an ECO functionality 7. Connect the unit in modbus network for management via BMS 8. Obtain a "chiller call" or a "boiler call" via a clean contact 1A/230 Vac Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€61,00
-
Ferroli Remote Chronocontrol Chronothermostat Ferroli Romeo W Rf Wireless With Weekly Programming Cod.013101xa
FERROLI ROMEO W RF WIRELESS CHRONOTHERMOSTAT REMOTE CHRONO CONTROL WITH WEEKLY PROGRAMMING COD.013101XA Article number: 013101XA Model: Romeo W RF with wireless transmitter with weekly programming. Battery powered (2x AA) With Romeo you can Adjust the heating and DHW temperatures Know the operating status of the boiler View the temperatures inside and outside the house Restart the boiler in case of temporary lockout Program the daily or weekly environmental comfort Activate/deactivate the heating function via the telephone A+ SYSTEM: Romeo and the external probe , combined with a Ferroli boiler with seasonal efficiency ηs 94%, make up a heating system with A+ labeling ROMEO Remote control with weekly programming weekly programming, max 6 periods per day; heating and domestic hot water flow temperature settings; visualization of external temperature and possibility of working with sliding temperature via external probe (optional); modulation of the flow temperature according to the ambient temperature; ignition - shutdown - reset of the boiler; telephone contact input. Both models with wired connection and with Wireless radio transmitter are available. The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings. The range: W MODELS : wired with weekly programming. W RF MODELS : with wireless transmitter with weekly programming. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€146,00
-
Ferroli Ferroli Condensing Boiler Bluehelix Hitech Rrt 28 K 50 With 50 Liters Accumulation Free Smoke Exhaust Kit Low Nox Methane Or LPG - New
Ferroli condensing boiler Bluehelix HiTech RRT 28 K 50 with 50 liter storage tank low NOx flue gas kit for methane or LPG - New Heat input Min / Max Heating 3.5 / 24.5 Min / Max Sanitary heat output 28.5 Heating power Min / Max Heating 3.4 / 24.0 Thermal power 28 max Useful thermal efficiency 80°C-60°C Pmax % / Pmin % 98.1 / 98.0 NOx class 6 Boiler capacity 50 litres Heating efficiency class A Sanitary Efficiency Class A XL load profile Dimensions HxWxD mm 807x600x434 Bluehelix HiTech RRT K 50 > STRONG POINTS: - Boiler with thick stainless steel primary exchanger , with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt - : in combination with the modulating remote control and the external probe (optional) it reaches the upper efficiency class A+ (scale from G to A+++) - Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:10 (mod. 34) - MC2 : Multi Combustion Control, new combustion system with patented gasadaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures) - MGR: Methane, LPG, Propane air Ready through a simple configuration the boiler is able to operate on methane, LPG and propane air without the use of additional conversion kits - Exclusive exchanger-burner system with self-cooled door: simplifies maintenance and reduces its cost thanks to fewer parts to replace. - Production of domestic hot water with 50 liter stainless steel storage tank - Arrangement for recirculation attachments (present in the accessory: attachment connection kit) - Hydraulic connections covered by the boiler casing - Standard by-pass - "Range Rated" certified generator: the maximum heat input in heating mode can be adapted to the heat requirements of the system while maintaining the efficiency values declared in the approval > BENEFITS OF BLUEHELIX HITECH RRT K 50: - Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes - FPS: Smoke Protection System. The flue clapet valve inserted as standard on the boiler allows easy connection to pressurized collective flue systems (e.g. in renovations), in accordance with the UNI 7129 standard - Designed to simplify and facilitate normal maintenance and cleaning operations - Anti-legionella function with programmable timing from 1 to 7 days - Timed anti-blocking for circulator and three-way valve - Sliding temperature operation via optional external probe - Place of installation: also for outdoors in a partially protected place up to -5°C as standard - Free methane/LPG/propaneted air transformation during the initial product check and activation of the conventional guarantee, to be requested from the Authorized Assistance Center
€1.902,00 - €1.980,00
-
Ferroli Ferroli Sky Eco 17f Low Nox Gas Water Heater Complete With LPG Fume Kit - New
Ferroli SKY ECO 17F Low NOx gas water heater complete with LPG fume kit - NEW ERP Class (Class G - A) A XL load profile Nominal heat input Max kW 32.9 Thermal power Max / Min kW 29.6 / 11.47 Maximum working pressure 10 bar Maximum DHW production Δt 25°C / Δt 30°C l/min 17.0 / 14.2 Power supply V/Hz 230 / 50 Dimensions HxL 595x375 mm New Ferroli ECO range EFFECTIVE The ECO range has been designed according to the stringent efficiency parameters of the European ErP Directive. In practice, they are able to produce a lot of hot water at a low cost, respecting the environment and with minimal polluting emissions. They can also be integrated into a solar thermal system with extreme simplicity for maximum efficiency and comfort. EASY ECO water heaters are extremely simple to install and are interchangeable with previous series. Although very compact in size, they have been designed and built in such a way as to have easy access to the internal components for easy maintenance. BEAUTIFUL AND SMART The designers of the ECO project have created a «friendly» aesthetic that can be easily integrated with the most diverse furnishing styles. The knob or button controls have been designed to be easy to use and immediately understood. All Ferroli gas water heaters are equipped with a user interface display. Sky ECO F Sealed chamber gas water heater, with modulating thermal power and electronic control of the. Combustion. LOW NOx fume emission and SUN EASY system for direct coupling to a solar thermal system SUN EASY Easy... Cheap... Brilliant The SKY ECO range has been designed to be easily integrated with thermal solar systems, with natural or forced circulation. The temperature of the water coming from the solar circuit is constantly monitored and the water heater burner is turned on only if it is not hot enough. To reach the desired temperature, SUN EASY allows considerable savings even during the coldest seasons, exploiting and integrating even the smallest solar contribution, otherwise lost. The heart of water heaters All ECO series water heaters comply with the very strict restrictions on the emission of fumes into the atmosphere, imposed by European regulations. The burners in the ECO range use a particular technology which consists in keeping the flame temperature very low, keeping the gas trains wet. This expedient makes it possible to go well below the limits imposed by the ErP directive which sets the NOx limit at the threshold of 56 mg/kWh. Copper exchanger Interface displays Continuous power modulation - Available for operation with Natural Gas, LPG and Propane Air (50% air - 50% G31 by means of a specific transformation to be requested from the authorized assistance center at the maximum total price of 30 euros + VAT) Solar installations Also outdoor installation in protected places Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€440,00
-
Ferroli Fan Coil Fan Coil Ferroli Jolly Top I Inverter Vm350 6,30 Kw
Command excluded to be purchased separately (TE/TER) Fan Coil Fan Coil Ferroli Jolly Top I Inverter VM350 6.30 kW Power supply V-ph-Hz 230-1-50 Total cooling capacity max/med/min kW 3.50/2.89/2.22 Thermal power max/med/min 70/60 °C kW 7.68/6.3/4.74 General data Max/med/min air flow m³/h 595/470/340 Absorbed power max/med/min W 26/17/10 Sound power max/med/min dB(A) 52/44/36 Dimensions WxHxD mm 1240x495x200 JOLLY I New series of fan coils with centrifugal type fan with high efficiency brushless DC motor. Characterized by a maximum depth of 200 mm and in the version with casing by a particularly attractive aesthetic line, they are suitable for heating applications and residential air conditioning. Available in 5 sizes with cooling capacities from 1.50 to 5.60 kW and air flow rates from 255 to 1190 m3 /h. In the standard version they are offered with a single 3-row coil which can be combined as an accessory, in the case of 4-pipe systems, with an additional 1-row coil. Available in two versions, VM with cabinet and VN without cabinet for built-in applications. The units can be installed both in vertical and horizontal position Construction features - VM versions SUPPORTING STRUCTURE It is made of galvanized sheet metal of adequate thickness. On the back there are slots for fixing the device. For models without a covering casing, a closing panel for the fan group is provided, mounted on the front THERMAL EXCHANGE COIL 3-row coil in copper tube and aluminum fins blocked by mechanical expansion of the tubes. The manifolds in the upper part of the battery are equipped with air vents, while in the lower part they have a water drain valve*. * The default hydraulic connection for the coil is on the LEFT. However, it is possible to turn the coil and change it to the RIGHT (see Installation Manual). CONDENSATE COLLECTION TRAY optional Made of thermoplastic material to avoid corrosion phenomena, it allows the machine to be installed in both vertical and horizontal positions. In particular, in horizontal installation, its shape makes it possible to collect the drops of condensation that form on the collectors during cold operation. The drain hole is obtained directly from the condensate collection tray and allows it to be eliminated during cold operation. It is present on both sides of the machine to facilitate rotation of the battery FAN MOTOR (for version I) The electric motor is of the DC brushless type with high efficiency continuous speed regulation and is directly coupled to the fans and cushioned by elastic supports. AIR FILTER Easily removable and regenerable by simply washing with water. COVER (VM only) Partly made of steel sheet painted with epoxy powders to guarantee high resistance to corrosion and partly in anti-UV thermoplastic material to guarantee resistance to ultraviolet rays. The grilles for air diffusion and the door for accessing the control panel are inserted in the upper part, both in anti-UV thermoplastic material. HYDRAULIC CONNECTIONS The connections, positioned on the left side, are of the ¾” gas female type. It is possible to rotate the coil which is supplied standard with left side connections, moving the hydraulic connections to the right side. These new units are characterized by an elegant aesthetic line and by the multiple possibilities of insertion in different types of system. The mantellati models lend themselves to wall or niche solutions (raised or resting on feet), or suspended horizontally from the ceiling. The dismantled models are particularly suitable for concealed built-in solutions or inside false ceilings. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€438,00
-
Ferroli Area Occasioni Condensing Boiler Ferroli Divacondens D Plus F24 Low Nox Methane Complete With Coaxial Flue Kit
ATTENTION THE PRODUCT IS NEW AND 100% WORKING, BUT HAS DENT ON THE TOP (SEE PHOTO NEXT TO THE MAIN IMAGE) NB The boiler will be supplied with methane, for LPG operation you must contact your local Authorized Assistance Centre. Technical features Model : Divacondens D Plus Nominal thermal power: 24 kW Power supply: methane Specifications Energy efficiency according to the European ErP directive Heating Energy Efficiency Class: B Seasonal Space Heating Energy Efficiency : 89% Performance Heating Thermal Capacity : 7,5 ~ 25,0 kW Heating Thermal Power: 7.2 ~ 24.2 kW Ultimate Thermal Efficiency 30% Pmin : 100.1% Domestic Hot Water Production 25°C Δt 30°C : 13,9 ~ 11,6 l/min NOx emissions 6 Dimensions and weight Dimensions (LxHxP): 400x700x330 mm Weight : 35Kg Ferroli Divacondens D Plus Boiler The Simplest Solution For A Condensing Boiler DIVACONDENS D PLUS is the condensing heat generator for traditional heating systems. The tried and tested Ferroli technology in the field of traditional wall mounted boilers has been enriched by increasing the performance of the product in the simplest way, with the use of a robust recuperator which preheats the primary circuit using the residual heat of the exhaust fumes and a new cooled burner with low NOx emissions. The Range Divacondens D Plus is offered in a single model for heating and instantaneous production of domestic hot water Characteristics > Condensing boiler for heating high temperature systems and producing domestic hot water. It is not suitable for combination with direct delivery to systems with low temperature radiant panels > Compact geometry primary exchanger > Instant production of domestic hot water with dedicated plate exchanger > Post-recovery of the latent heat of condensation, in function of pre-heating of the primary circuit > Forced draught sealed chamber boiler, with water-cooled atmospheric burner with low NOx emissions > Standard automatic hydraulic by-pass > Minimum polluting emissions (class 6 according to EN 15502-1) > High efficiency low consumption circulator (ErP - Class A) with anti-blocking system by activation for a few seconds every 24 hours of inactivity > Can be combined with the modulating remote timer control > Simple and complete control panel, display user interface, with setting keys > Robust post-condenser fed by the closed circuit of the primary. The heat exchange with the fumes takes place inside large diameter water passages. > Generator with simple and rational operation > ECO function in DHW for greater savings in the period of low use of hot water > Predisposition for solar systems: prearranged for the production of domestic hot water combined with solar panel systems > Place of installation: also for outdoors in a partially protected place down to -5°C as standard > Certified operation also with propane air (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center > Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre Boiler control The DIVACONDENS D PLUS control unit consists of an easy-to-use interface with a backlit display. Using the buttons, it is possible to easily adjust the heating flow temperature, the domestic hot water setpoint, switch the generator on/off or activate the comfort function, monitoring the status of the boiler. The control panel is completed by a traditional pressure gauge which can check the system pressure at any time. The performances Energy classification DHW load profile (maximum flow rate at the corresponding efficiency declared in DHW) Efficiency in the production of domestic hot water FOR COMBINED BOILERS The "climate-energy 20/20/20" package sets ambitious targets for the reduction of greenhouse gas emissions, of energy consumption as well as the increase in the use of renewable energies, corresponding to a percentage of 20% to be reached by 2020. In this context, the European regulation ErP (Energy Related Products) introduces an energy classification also for water generators hot water for space heating and domestic hot water purposes. This classification translates into an energy label which must necessarily accompany all the products affected by the Regulation, introduced on the market from 26 September 2015. The labeling constitutes an easy guide for the consumer, who can choose - through standardized and objective indications - the product more efficient. In this way, the choice will be the most sparing in terms of consumption for the benefit of the user, but also the most virtuous for energy balances and consequently, for the environment. The most significant parameters indicated on the label are the seasonal efficiency index in heating and efficiency in the eventual production of domestic hot water, according to a scale which, in the case of the single boiler product, ranges from A to G*. Furthermore, for combined boilers, a load profile is indicated corresponding to the DHW flow rate of the appliance measured in a series of typical samplings, guaranteeing at least the declared DHW efficiency. This index is identified with a letter/”size” (S, M …XXL). Solar circuit integration DIVACONDENS D PLUS boasts electronics that simplify integration with thermal solar systems, both with natural and forced circulation. The microprocessor controls the temperature of the water coming from the solar circuit through the domestic hot water sensor and turns on the burner only if necessary. To reach the desired temperature, SUN EASY allows considerable savings even during the coldest seasons, exploiting and integrating even the smallest solar contribution, otherwise lost. In case of insufficient irradiation and therefore a modest pre-heating of the domestic water, the boiler will contribute with the heat necessary to reach the required set point temperature. If the sun and the solar system fulfill their "duty" no integration by the boiler will be necessary, the hot water will be conveyed to the tap, without the need for additional devices, with the mixing of the thermostatic valves. Safety and comfort ANTIFREEZE In the event that the temperature in the boiler drops to 5°C, the burner ignites automatically and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. POST-CIRCULATION This function makes it possible to recover all the heat supplied by thermal inertia of the exchanger and transfer it to the heating system, and consequently to the rooms to be heated. This is a timer function (customizable duration) and is active after the burner goes out in heating mode. SLIDING TEMPERATURE OPERATION With the installation of the “external probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. EASY CONTROL The electronic board of DIVACONDENS D PLUS adopts the Opentherm protocol. It allows the integration of other peripheral control units such as, for example, the ROMEO remote timer control. In fact, the Opentherm standard has been specially designed to share the logic and operating algorithms of the boiler with other additional control units. As a digital protocol, it allows total integration between the boiler and the satellite, with full control of the functions from the boiler and similarly from its satellite. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€425,00
-
Ferroli Electric water heater Ferroli Model Calypso Smart 50 Ho Horizontal Liters
Electric water heater Ferroli Model Calypso Smart Ho 50 liters Horizontal Technical features Model : Calypso Smart 50 HO Tank capacity : 50 Electric Power: 1200 W Heating time 2 h - 3 min Load profile : M ERP class : B Temperature regulation range 40-80 °C Ho Horizontal installation Power Source 220-240V 50/60Hz Annual Electricity Consumption (AEC) 1251 Acoustic power level 15 db Smart controls Code E01027KA Warranty : 2 Years Dimensions and weight : Height/Width 565mm Maximum diameter 438 Empty weight 14kg Calypso Smart Medium Liter Electric Water Heaters Electric storage water heaters with very high efficiency, vertical and horizontal development with capacities from 50 to 150 litres. Endowed of : Electronic control of the '' SMART '' type able to optimize consumption according to the user's needs Control panel with luminous LEDs for reading the operating temperatures and operating status and convenient buttons for managing the water heater Magnesium anode to protect the tank 5-bolt flange to ensure sturdiness and facilitate periodic maintenance Safety valve set at 8 bar Supplied with three-pole electric cable without plug Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€150,00
-
Ferroli Coaxial Fume Exhaust Kit For Ferroli Boiler
COAXIAL FLUE KIT FOR FERROLI BOILER Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€30,00
-
FERROLI Electric Undersink Water Heater Ferroli Novo 5/2 Undersink From 5 Liters
Technical features Model : Novo 5/2 Product Code : GRWDXASA Capacity : 5 litres Installation : Under sink Energy Efficiency Class: B Load profile : XXS Working pressure : 8 bars Electric power : 2000 W Power supply (V,Hz, Ø) : 220~240/50/1 Heating time 20° ~ 55° C : 10 minutes Degree of protection : IP24 Connection diameter : 12.70 mm (1/2") Dimensions and weight Dimensions (HxWxD): 280x238x238 mm Weight : 4.5Kg Ferroli NOVO Small electric water heaters Thanks to their extremely compact dimensions, the water heaters of the NOVO family are particularly suitable for installations in confined spaces It is available in 2 models with a capacity of 5 - 10 litres, both in the above and under-sink versions, it is ideal for serving small service users (offices, laboratories, craft workshops….) Quick and easy to install, in an independent version or in line with the centralized system Small water heaters are the ideal solution for quickly obtaining hot water in any situation, both autonomously and in combination with a centralized system. With CUBO, BRAVO and NOVO it is possible to add a hot water withdrawal point in areas of the house not served by the central system, or where there is no real sanitary fixture. In this case, it will be sufficient to have a supply of cold water and a power socket to be able to install one of the appliances with extreme ease and serve up to two withdrawal points. The water heaters for small volumes can also be installed in line with a sanitary accumulation. In this case, they allow the water to be brought up to the maximum temperature (60°C) only near the drawing point, keeping the rest of the storage tank at relatively low temperatures. In this way, high performance is obtained with considerable energy savings Main features - 2 year guarantee - Range made up of 2 models with 5 and 10 liter capacities, both available in over and under the sink versions - Electric resistances in stainless steel - Porcelain glass kettle - Magnesium anode to protect the boiler - External temperature regulator with led for reaching the set-point - Capillary thermostat for temperature control Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€81,00
-
Ferroli Electric water heater Titano 80 Ve Bf Vertical 80 Liters
Technical features Model: Titano 80 VE BF Vertical Load profile : M ERP class: C Tank capacity: 78 litres Electric Power: 1200W Heating time (20+55°C) : 2h-3 Minutes Weight: 24Kg Warranty: 5 years X: 440mm; Y: 750mm; Z 460mm; A: 180mm; B: -mm; D: 265mm; D : 100mm; E: 130mm ; G: 1/2" (inch); General characteristics THE RANGE The TITANO and CALYPSO families are produced in vertical and horizontal versions, with capacities of 50, 80, 100, 120 and 150 litres. All vertical models are equipped with an external temperature regulator. > Horizontal or Vertical? Vertical water heaters offer better performance than the corresponding horizontal versions for better mixing of the water in the boiler. This translates into energy savings and shorter waiting times for the operating temperature to be reached. The horizontal versions have been designed to solve installation problems in confined spaces. The reduced overall height in fact allows installation in false ceilings, attics and in the most unthinkable corners of the house Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€159,00
-
Ferroli Offer - Fan Coil Ferroli Top Fan Plus Mod Vm-B 100 + Commutator Cm-F
COMPLETE WITH CM-F ON/OFF CABINET SWITCH FAN COIL FAN COIL FERROLI TOP FAN PLUS mod. VM-B 100 + free CM-F switch Max-min cooling capacity: 6100-4400 W Max-min heat output: 14900-9600W Dehumidification: 2100g/h Max-min air flow: 1200-670 m3/h No. of fans: 2 Max-min sound power: 61-49 db(A) Max-min sound pressure: 52-40 db(A) 3R main battery connections: 3/4" 1R extra battery connections: 1/2 " Water content batt.3R: 2.42 l Water content batt.1R: 0.64 l Power supply: 230-1-50 [VF-Hz] Dimensions (HxWxD): 554+100 x 1440 x 220 mm; 34kg Notes : Heating: temp. Ambient air: 20°C; temp. Inlet water: 70°C, Δt water 10°C at maximum fan speed; for medium and minimum fan speed, water flow as in maximum speed. Cooling: temp. Room Air: 27°C DB 19°C WBtemp. Inlet water: 7°C, Δt water 5°C at maximum fan speed; for medium and minimum fan speed, water flow rate as in maximum speed. TOP FAN PLUS Consisting of a fan, a heat exchange element and a filter, fan coil units are ideal machines for summer air conditioning and winter heating of the house and any room. Fed with chilled water from a cooler, they make the air in the room fresh, dry and clean in a very short time and with great energy efficiency; fed with hot water from a heat pump or boiler, they provide clean and economical heat during the winter season. Series with centrifugal fan, available in 9 sizes and three versions: VM-B with casing for vertical and horizontal installation and suction from below VM-F with casing for vertical and horizontal installation and front suction VN without casing for vertical and horizontal installation Characteristics: Cover cabinet obtained by integrating parts in plastic material and parts in galvanized sheet metal, oven painted with epoxy powders Supporting structure in galvanized steel Finned pack heat exchange coil with aluminum fins and copper pipes, brass manifolds specially designed to guarantee low pressure drops Air filter easy to remove and clean, regenerable by washing or blowing Fan unit with three-speed motor and aluminum impellers Wide range of controls both to be installed on the machine and remote on the wall SWITCH: It has a selector for the Summer / Off / Winter function, while the second selects the Min / Med / Max fan speed. Available in two different versions: - for installation on CM-F cabinet - for CMR-F remote installation Two series of panels are available for this type of installation: ON THE MACHINE for installation of the fan coil on the floor (models VM-B, VM-F), REMOTE ON THE WALL for installation of the fan coil on the ceiling (models VM-B, VM- F) or false ceiling (model VN). Each of the series includes three types of control, switch, basic thermostat and advanced thermostat. NEW (OPTIONAL) REMOTE CONTROL Infrared remote control (for all sizes and versions) with liquid crystal display complete with support bracket for wall mounting, which allows the following functions: Switching on\Switching off Operating modes (Hot/Cool/AutoChange Over/Ventilation only - presence of valves required-) Fan speed (Max/Med/Min/Auto) Set point temperature Timer setting °C or °F temperature scale setting VISIBLE RECEIVER Located on the front panel of the unit, it is complete with Timer led (yellow), operating led (green) and emergency ON/OFF and reception zone key. The system completes with the card inside the unit. The system is supplied already installed and tested in the company. WALL-MOUNTED RECEIVER (FLUSH MOUNTING) The receiver is supplied in the case of recessed units and is positioned visible on the false ceiling. It is complete with Timer led (yellow), operating led (green) and button for emergency ON/OFF and reception area. It is supplied with a multipolar cable (max length 0.8 metres) for rapid connection and with the electronic board to be installed on the unit. It can be removed from the machine; the testing of the system takes place in the company while the positioning of the receiver is the responsibility of the installer. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€317,00€249,00
-
Ferroli Support Feet For Fan Coil
Support feet for fan coil unit
€16,00
You have seen 408 out of 497 products