Wall Air Conditioners
Gree Gree Air Conditioner Quad Split Inverter Fairy Series 12+12+12+12 With Gwhd(36)Nk6lo R-32 Integrated Wi-Fi 12000+12000+12000+12000
Technical features Indoor Units Model: Indoor unit catalog code : 4x GWH12ACC-K6DNA1D/I Power : 12000 Btu Cooling Capacity: 3.5 kW Heating Capacity: 3.67 kW Treated Air Indoor Unit : 390~680 m 3 /h Sound Power Level : 38~57 dB(A) Sound Pressure Level : 26~42 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (HxWxD): 294x889x212 mm Indoor Unit Weight: 11 Kg Integrated Wi-Fi Outdoor Unit Model: Outdoor Unit catalog code: GWHD(36)NK6LO Max indoor units: up to 4 indoor units Energy efficiency: SEER : 6.1 SCOP : 4.0 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual energy consumption in Cooling : 602 kWh/a Annual energy consumption in Heating : 3675 kWh/a Performance: Cooling Capacity: 10.5 kW Heating Capacity: 12.0 kW Absorption in cooling: 3.10 kW Heating absorption: 3.20 kW Sound power level : 67 dB(A) Sound pressure level : 57 dB(A) Characteristics: Power (V/Hz/F) : 220~240/50/1 Refrigerant gas : R-32 Guaranteed temperature range: - Cooling: -15° ~ 43°C - Heating: -15° ~ 24° C Installation data: Pipe diameter Liquid : 6.35 mm (1/4") x4 Gas pipe diameter : 9.52 mm (3/8") x4 Maximum piping length: 40 m Maximum difference in height indoor unit / outdoor unit: 15 m Dimensions: External Unit Dimensions (HxWxD): 1103x1087x440 mm Weight of Outdoor Unit: 90.0 Kg Why Choose Gree Comfort? Gree is eco-friendly, uses R32 refrigerant, with low environmental impact. The technology used by GREE air conditioners and heat pumps is GREEN, because it is renewable energy: it captures the thermal energy present in the air and transfers it from one place to another, multiplying it. The use of R32, a refrigerant gas with a low impact on global warming, makes room comfort environmentally friendly: there is no impact on the ozone layer, the gas charge is 30% lower because R32 has a higher energy efficiency and the potential effect on global warming is reduced by 1/3 compared to the traditional R410A refrigerant Gree Uses the Latest Generation DC Inverter Technology and saves you on Consumption Inverter G10 is the Gree technology that allows you to modulate the power and speed of the compressor and fans of the air conditioner or heat pump based on real comfort needs. As the ambient temperature approaches the set value, the compressor and fans reduce speed and therefore energy consumption: this is why this technology contributes to containing energy consumption Gree gives you all the comfort you could wish for DC Inverter technology GREE offers multiple advantages: rapid achievement of the desired temperature, precise temperature control, constant comfort, silence, control of electricity consumption Flexible matching The outdoor units can be combined with all types of indoor units according to the combinations illustrated below Operation up to low external temperatures The ability to operate down to -15°C, both in cold -15°C -15°C and in heat, guarantees high product reliability: when the outside temperature varies, the frequency of the compressor and the speed of the fan adjust accordingly Gree Fairy I Feel The sensor built into the remote controller senses the surrounding temperature and transmits the signal to the indoor unit. In this way the indoor unit can adjust the volume and temperature of the airflow to ensure maximum comfort at the exact point where the remote control is placed, not where the unit is. COLD PLASMA air purification system It releases ions capable of neutralizing bacteria, fungi, viruses, pollen, mites and pollutants present in the air in general, making the environment healthy and the air pleasant. It guarantees effective sterilization of the air, killing over 90% of bacteria. Removes over 400 kinds of odors. Improves air quality, enriching it with negative ions. New elegant design, original and attractive finish The rounded design and the precious finish, embellished with chromed details and the original lateral workmanship, make the unit elegant and captivating. Door control contact This function allows you to use the magnetic card on the entrance door (for example in hotel rooms) to control the switching on and off of the air conditioner. By inserting the card, the air conditioner starts, by removing the card, the air conditioner stops. In this way, waste of energy is avoided. For this application it is necessary to use the wired controller. Wi-Fi Remotely Thanks to the integrated WIFI module, it is possible to control the operation of the unit remotely via the APP on your smartphone, turn the unit on or off, select the desired mode and temperature, etc., to program your comfort at any time, even when you are away from home Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€2.580,00
Mitsubishi Heavy Industries Mitsubishi Heavy Industries Air Conditioner Split Inverter Panels Kireia Plus Titanium Series 7+9+9+9 With Scm80zs-W R-32 Wi-Fi Optional 7000+9000+9000+9000
NB: THE PRODUCT IS AVAILABLE ON ORDER ONLY Technical features Indoor units 1) Model Internal Unit Catalog Code: 1x SRK20ZSX-T Power: 7000 btu/h Cooling Capacity : 2.0 kW Heating Capacity : 3.0 kW Treated Air : 300 ~ 732 m 3 /min Sound pressure level : 19 ~ 38 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (LxPxH): 920x220x305 mm Indoor Unit Weight: 13 Kg Optional Wi-Fi Card (Code AM-MHI-01 ) 2) Model Internal Unit Catalog Code : 3x SRK25ZSX-T Power: 9000 btu/h Cooling Capacity : 2.5 kW Heating Capacity : 3.4 kW Treated Air : 300 ~ 768 m 3 /min Sound pressure level : 19 ~ 40 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (LxPxH): 920x220x305 mm Indoor Unit Weight: 13 Kg Optional Wi-Fi Card (Code AM-MHI-01 ) Outdoor Unit Model: Indoor Unit catalog code: SCM80ZS-W Max indoor units: up to 4 indoor units Energy efficiency: SEER : 8.2 SCOP: 4.6 Cooling Energy Efficiency Class: A++ Heating Energy Efficiency Class: A++ Annual energy consumption in Cooling : 342 kWh/a Annual energy consumption in Heating : 2038 kWh/a Performance: Cooling Capacity: 8.0 kW Heating Capacity: 9.3 kW Std cooling absorption: 1.70 kW Std heating absorption: 1.95 kW Sound power level : 67 dB(A) Sound pressure level : 54 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Guaranteed temperature range: - Cooling: -15° ~ 46° C - Heating: -15° ~ 24° C Installation Data: Pipe diameter Liquid : 6.35 mm (1/4") x4 Gas pipe diameter : 9.52 mm (3/8") x4 Maximum piping length: 70 m Maximum height difference Indoor Unit / Outdoor Unit: 20 m Dimensions: Dimensions Outdoor Unit (LxPxH): 880(+73)x340x750 mm Weight of Outdoor Unit: 61 Kg Mitsubishi Heavy Industries KIREIA PLUS Japanese Technology, Italian Design A'Design Award KIREIA Plus received the Silver A'Design Award in the “Engineering and Technical Design” category for “having met the demanding expectations of the European air conditioning market”. Stylish Simplicity Soft curves and rounded corners that give the machine a 'floating effect' making it elegant and compact Color White and Titanium The elegance of white, the hi-tech style of titanium Human Sensor (Optional) It knows when you give it your all, it recognizes your moments of relaxation, and if you leave, it saves energy. Three functions to achieve the optimal level of energy savings with the HUMAN SENSOR device • Eco Operation By Human Sensor • Auto OFF By Human Sensor • Fuzzy Auto Operation Breathe clean air Thanks to the combined action of the antiallergenic and photocatalytic filters, KIREIA PLUS retains and neutralizes pollen and eliminates bad smells. With the Allergen Clear function all bacteria, viruses and molds collected on the surface of the anti-allergenic filter are eliminated Optimized Airflow The 3D auto function ensures better distribution and circulation of the air in the room. The control logic optimally regulates the airflow , automatically controlling the fan speed and the direction of the flow Smart remote control The remote control supplied as standard with KIREIA guarantees simple and intuitive use, allows complete control of the temperature and air distribution in the room • Weekly timer: up to 4 daily schedules for a total of 28 weekly schedules • Modes: auto, cooling, heating, dehumidification and ventilation • Available functions: Eco, Night Setback, Silent Wi-Fi Optional Thanks to the Wi-Fi module, it is possible to access the remote control of the air conditioner via the app for smartphones and tablets Home Air Conditioning Control, even outside the home With the app it is possible to turn on, turn off, adjust the room temperature and the air flow of each air conditioner in the house Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€4.689,00
MITSUBISHI ELECTRIC Mitsubishi Electric Air Conditioner Quad Split Inverter Series Ap-Vgk 7+9+9+12 With Mxz-4f72vf R-32 Integrated Wi-Fi 7000+9000+9000+12000
Technical features Indoor units 1) Model: Indoor Unit Catalog Code : 1x MSZ-AP20VGK Power : 7000 Btu Cooling Capacity : 2.0 kW Heating Capacity : 2.5 kW Treated Air : 3,5 ~ 7,3 m 3 /min Sound Power Level : 60 dB(A) Sound pressure level : 21~42 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (HxWxD): 250x760x178 mm Indoor Unit Weight: 8.2 kg Integrated Wi-Fi 2) Model: Indoor Unit Catalog Code: 2x MSZ-AP25VGK Power : 9000 Btu Cooling Capacity : 2.5 kW Heating Capacity : 3.2 kW Treated Air : 4,9 ~ 12,9 m 3 /min Sound Power Level : 57 dB(A) Sound pressure level : 19~45 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (HxWxD): 299x798x219 mm Indoor Unit Weight: 10.5 kg Integrated Wi-Fi 3) Model: Indoor Unit Catalog Code: 1x MSZ-AP35VGK Power : 12000 Btu Cooling Capacity : 3.5 kW Heating Capacity : 4.0 kW Treated Air : 4,9 ~ 12,9 m 3 /min Sound Power Level : 57 dB(A) Sound pressure level : 19~45 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (HxWxD): 299x798x219 mm Indoor Unit Weight: 10.5 kg Integrated Wi-Fi Outdoor Unit Model: Catalog code Outdoor Unit : MXZ-4F72VF2/3 Max indoor units: up to 4 indoor units Energy efficiency: SEER : 8.13 SCOP: 4.07 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual energy consumption in Cooling : 310 kWh/a Annual energy consumption in Heating: 2410 kWh/a Performance: Cooling Capacity: 7.2 kW Heating Capacity: 8.6 kW Cooling absorption: 1.85 kW Heating absorption: 1.87 kW Sound power level : 63 dB(A) Sound pressure level : 48~54 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Guaranteed temperature range: - Cooling: -10° ~ 46°C - Heating: -15° ~ 24° C Installation data: Pipe diameter Liquid : 6.35 mm (1/4") x4 Gas pipe diameter : 12.70 mm (1/2") x1 + 9.52 mm (3/8") x3 Maximum piping length: 60 m Maximum difference in height Internal Unit / External Unit: 15 m Internal Unit Above Maximum difference in height Internal Unit / External Unit: 10 m Internal Unit Below Dimensions: External Unit Dimensions (HxWxD): 710x840x330 mm Weight of Outdoor Unit: 59.0 Kg Compact design and size The MSZ-AP units are characterized by ultra-compact dimensions , with only 2 dimensional levels for 6 different powers Integrated MELCloud The new MSZ-AP (in the VGK version) offers the user experience of MELCloud integrated into the machine. Ready to be configured and used, it allows the user to remotely manage all the air conditioner functions thanks to the Wi-Fi controller. Efficiency Thanks to careful planning and the introduction of R32 refrigerant , the efficiency of the new MSZ-AP units has significantly increased, reaching class A+++ in cooling (sizes 25 and 35) and A++ in heating across the entire lineup. Air distribution Thanks to the presence of the motorized louver, it is possible to direct the air flow to achieve maximum comfort in the room in any operating mode (sizes 25-50). Furthermore, the horizontal flow eliminates annoying drafts towards the occupants. New backlit remote The backlit remote control allows easy viewing even at night Silent operation For sizes 25/35 the sound emission of the indoor unit is only 19dB when operating at minimum speed, guaranteeing maximum acoustic comfort inside the room Night Mode By activating the Night Mode function from the remote control, it is possible to set the air conditioner for night-time operation: LED dimming Deactivation of "beep" sound 3dB reduction of outdoor unit sound emission. Advanced filtration Thanks to the air purifying filter in the internal unit, the new MSZ-AP model guarantees the removal of dust and bad odours. Furthermore, for sizes 25-50, it is possible to provide the optional silver ion air purifying filter, which captures bacteria, pollen and other allergens. Energy monitoring The new MSZ-AP model supports the energy consumption monitoring function thanks to the Cloud MELCloud remote control system. Efficiency Thanks to careful planning and the introduction of R32 refrigerant, the efficiency of the new multi-split outdoor units is significantly increased, reaching class A+++ in cooling (sizes 2F42,2F53,3F54) and A++ (sizes 2F42,2F53,3F54) in heating. Connectivity The extraordinary connectivity available with the new external units allows to satisfy every need. The MXZ-F unit demonstrates all-round versatility , being connectable to most of the indoor unit range of the Residential and Commercial Line, whether they are wall mounted, ceiling cassette or ducted. Quietness The new MXZ-F multisplit outdoor units reach a new level of operating silence, reducing the sound emission by up to 4dB compared to the previous model in cooling mode and up to 3dB in heating mode. R32: reduced environmental impact Thanks to the use of R32 refrigerant and a reduced pre-charge of the units compared to the previous model, the MXZ-F units introduce a significantly lower quantity of equivalent tons of CO2 into the environment. Automatic noise reduction mode By setting this function, it is possible to automatically decrease the noise level of the external unit as the internal loads to be satisfied decrease, such as for example during night cooling. Auto-correct links It is enough to press a button (MXZ-3E/F to MXZ-6D) or activate only one indoor unit (MXZ-2E/F) to ensure the correct connection between indoor and outdoor units. In the event of a connection error, the system will automatically correct it Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€3.677,00
MITSUBISHI ELECTRIC Air Conditioner Mitsubishi Electric Trial Split Inverter Series Ap-Vgk 7+12+12 With Mxz-3f54vf R-32 Integrated Wi-Fi 7000+12000+12000
Technical features Indoor units 1) Model: Indoor Unit Catalog Code : 1x MSZ-AP20VGK Power : 7000 Btu Cooling Capacity : 2.0 kW Heating Capacity : 2.5 kW Treated Air : 3,5 ~ 7,3 m 3 /min Sound Power Level : 60 dB(A) Sound pressure level : 21~42 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (HxWxD): 250x760x178 mm Indoor Unit Weight: 8.2 kg Integrated Wi-Fi 2) Model: Indoor Unit Catalog Code: 2x MSZ-AP35VGK Power : 12000 Btu Cooling Capacity : 3.5 kW Heating Capacity : 4.0 kW Treated Air : 4,9 ~ 12,9 m 3 /min Sound Power Level : 57 dB(A) Sound pressure level : 19~45 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (HxWxD): 299x798x219 mm Indoor Unit Weight: 10.5 kg Integrated Wi-Fi Outdoor Unit Model: Catalog code Outdoor Unit : MXZ-3F54VF2/3 Max indoor units: up to 3 indoor units Energy efficiency: SEER: 8.52 SCOP: 4.61 Energy Efficiency Class in Cooling : A+++ Heating Energy Efficiency Class: A++ Annual energy consumption in Cooling : 222 kWh/a Annual energy consumption in Heating: 1520 kWh/a Performance: Cooling Capacity: 5.4 kW Heating Capacity: 7.0 kW Cooling absorption: 1.32 kW Heating absorption: 1.4 kW Sound power level : 60 dB(A) Sound pressure level : 46~50 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Guaranteed temperature range: - Cooling: -10° ~ 46°C - Heating: -15° ~ 24° C Installation Data: Pipe diameter Liquid : 6.35 mm (1/4") x3 Gas pipe diameter : 9.52 mm (3/8") x3 Maximum piping length: 50 m Maximum difference in height Internal Unit / External Unit: 15 m Internal Unit Above Maximum difference in height Internal Unit / External Unit: 10 m Internal Unit Below Dimensions: External Unit Dimensions (HxWxD): 710x840x330 mm Weight of Outdoor Unit: 58.0 Kg Compact design and size The MSZ-AP units are characterized by ultra-compact dimensions , with only 2 dimensional levels for 6 different powers Integrated MELCloud The new MSZ-AP (in the VGK version) offers the user experience of MELCloud integrated into the machine. Ready to be configured and used, it allows the user to remotely manage all the air conditioner functions thanks to the Wi-Fi controller. Efficiency Thanks to careful planning and the introduction of R32 refrigerant , the efficiency of the new MSZ-AP units has significantly increased, reaching class A+++ in cooling (sizes 25 and 35) and A++ in heating across the entire lineup. Air distribution Thanks to the presence of the motorized louver, it is possible to direct the air flow to achieve maximum comfort in the room in any operating mode (sizes 25-50). Furthermore, the horizontal flow eliminates annoying drafts towards the occupants. New backlit remote The backlit remote control allows easy viewing even at night Silent operation For sizes 25/35 the sound emission of the indoor unit is only 19dB when operating at minimum speed, guaranteeing maximum acoustic comfort inside the room Night Mode By activating the Night Mode function from the remote control, it is possible to set the air conditioner for night-time operation: LED dimming Deactivation of "beep" sound 3dB reduction of outdoor unit sound emission. Advanced filtration Thanks to the air purifying filter in the internal unit, the new MSZ-AP model guarantees the removal of dust and bad odours. Furthermore, for sizes 25-50, it is possible to provide the optional silver ion air purifying filter, which captures bacteria, pollen and other allergens. Energy monitoring The new MSZ-AP model supports the energy consumption monitoring function thanks to the Cloud MELCloud remote control system. Efficiency Thanks to careful planning and the introduction of R32 refrigerant, the efficiency of the new multi-split outdoor units is significantly increased, reaching class A+++ in cooling (sizes 2F42,2F53,3F54) and A++ (sizes 2F42,2F53,3F54) in heating. Connectivity The extraordinary connectivity available with the new external units allows to satisfy every need. The MXZ-F unit demonstrates all-round versatility , being connectable to most of the indoor unit range of the Residential and Commercial Line, whether they are wall mounted, ceiling cassette or ducted. Quietness The new MXZ-F multisplit outdoor units reach a new level of operating silence, reducing the sound emission by up to 4dB compared to the previous model in cooling mode and up to 3dB in heating mode. R32: reduced environmental impact Thanks to the use of R32 refrigerant and a reduced pre-charge of the units compared to the previous model, the MXZ-F units introduce a significantly lower quantity of equivalent tons of CO2 into the environment. Automatic noise reduction mode By setting this function, it is possible to automatically decrease the noise level of the external unit as the internal loads to be satisfied decrease, such as for example during night cooling. Auto-correct links It is enough to press a button (MXZ-3E/F to MXZ-6D) or activate only one indoor unit (MXZ-2E/F) to ensure the correct connection between indoor and outdoor units. In the event of a connection error, the system will automatically correct it Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€2.931,00
MITSUBISHI ELECTRIC Air Conditioner Mitsubishi Electric Trial Split Inverter Series Ap + Mfz-Kt Floor 9+9+12 With Mxz-3f54vf R-32 Wi-Fi Optional 9000+9000+12000
Technical features Indoor Units 1) Model: Series: AP Internal Unit Code : 2 x MSZ-AP25VG Sound pressure : 19 - 24 - 30 - 36 - 42 dB(A) Sound Power : 57 dB(A) Diameter of the liquid tube: 6.35 mm (1/4") Gas Pipe Diameter: 9.52 (3/8") Internal Unit Dimensions (HxLxP): 299x798x219 mm Indoor Unit Weight: 10.5 Kg Wi-Fi Optional ( MAC Code-567IF-E ) 2) Model: Internal Unit Code: 1 x MFZ-KT35VG Power output in cooling mode: 3.5 kW Power output in Heating: 4.3 kW Sound Pressure : 19-24-31-37-41 dB(A) Internal Unit Dimensions (HxLxP): 600 x 750 x 215 mm Indoor Unit Weight: 14.2 Kg Wi-Fi Optional ( MAC Code-567IF-E ) Outdoor Unit Model: Catalog number : MXZ-3F54VF Gases : R-32 Minimum-max number of connectable indoor units: 3 Energy efficiency: Nominal cold cooling capacity 5.4 kW Nominal hot cooling capacity 7.0 kW SEER 8.52 SCOP 4.61 Cooling energy class A+++ Heating energy class A++ Performance: Max sound pressure level outdoor unit: 50 dB(A) External unit sound power level : 60 dB(A) Electrical data: Feeding : 230/1/50 Diameter of the liquid tube: 6.35 mm (1/4") Gas Pipe Diameter: 9.52 (3/8") Dimensions External Unit Dimensions (HxWxD): 710x840x330 mm Weight of Outdoor Unit: 58 Kg Multi-split DC Inverter The Inverter system is an electronic device that allows the speed of the compressor to be varied efficiently and, consequently, the power supplied by the air conditioner, based on the cooling or heating demand. Compared to traditional fixed speed (On/Off) air conditioners, inverter air conditioners reach the required temperature sooner and keep it stable, without annoying sudden changes, to the full advantage of comfort and electricity consumption. High seasonal efficiency Operating economy is the great advantage of Mitsubishi Electric air conditioners. Thanks to the DC Inverter regulation system and the careful design of the components used, energy efficiency reaches extraordinary levels. The entire range of multi-split air conditioners (MXZ-D) achieves high efficiency values even on a seasonal basis. Maximum Silence for Maximum Comfort The DC Inverter multisplit units are characterized by the very low noise level emitted. By activating the silent mode, this level can be further reduced automatically when the demand is lower (e.g. during the night in cooling mode). Compactness and Versatility The dimensions of the outdoor unit are extremely compact so as not to occupy the space on the terrace or in the garden of the house. The wide development of the pipes allows a vast choice of installation site. New MXZ outdoor unit R32: reduced environmental impact Thanks to the use of R32 refrigerant and a reduced pre-charge of the units compared to the previous model, the MXZ-F units introduce a significantly lower quantity of equivalent tons of CO2 into the environment. Auto-correct links It is enough to press a button (MXZ-3E/F to MXZ-6D) or activate only one indoor unit (MXZ-2E/F) to ensure the correct connection between indoor and outdoor units. In the event of a connection error, the system will automatically correct it. Efficiency Thanks to careful planning and the introduction of R32 refrigerant, the efficiency of the new multi-split outdoor units is significantly increased, reaching class A+++ in cooling (sizes 2F42,2F53,3F54,3F68,4F72) and A++ (sizes 2F42,2F53 ,3F54) in heating. Quietness The new MXZ-F multisplit outdoor units reach a new level of operating silence, reducing the sound emission by up to 4dB compared to the previous model in cooling mode and up to 3dB in heating mode. Energy monitoring The new MXZ-F model supports the energy consumption monitoring function thanks to the MELCloud remote control system, even in Multisplit R32 configuration. MSZ-AP series R32 ecological refrigerant Compact design High seasonal energy efficiency for the entire range Optional silver ion air purifying filter Minimum sound level Weekly timer Multi-split compatible Wi-Fi compatible Innovation and compact design The MSZ-AP units are characterized by their ultra-compact dimensions with only 2 dimensional levels for 6 different powers. Energy efficiency Thanks to careful planning and the introduction of R-32 refrigerant gas, the efficiency of the new MSZ-AP units is significantly increased, reaching class A+++ in cooling (sizes 25 and 35) and A++ in heating on the whole line. R32: a refrigerant for the future The R32 refrigerant used in the MSZ-AP series air conditioners is characterized by a lower Global Warming Potential (GWP) than the refrigerant gases used up to now in residential air conditioning, reducing its potential negative impact on the environment. Its advantages are: High energy efficiency Reduction of the quantity of refrigerant gas used Reduced environmental impact Easily loaded and recoverable as pure gas Low toxicity and flammability Air distribution Thanks to the presence of the motorized louver, it is possible to direct the air flow to achieve maximum comfort in any operating mode. MELCloud - Energy consumption monitoring NEW (optional) The new MSZ-AP model supports the energy consumption monitoring function thanks to the Cloud MELCloud remote control system, also in the Multisplit R32 configuration. It allows you to precisely regulate the air conditioning systems from Smartphones and Tablets via a dedicated app. Silent operation Environmental comfort is also linked to the sound level and is especially important in bedrooms or studios. For sizes 25/35 the sound emission of the indoor unit is only 19dB when operating at minimum speed, guaranteeing maximum acoustic comfort inside the room. Night Mode By activating the Night Mode function from the remote control, it is possible to set the air conditioner for night-time operation: LED brightness removal Deactivation of "beep" sound 3dB noise emission reduction from the outdoor unit Advanced filtration Thanks to the air purifying filter in the internal unit, the new MSZ-AP model guarantees the removal of dust and bad odours. Furthermore, for sizes 25-50, it is possible to provide the optional silver ion air purifying filter, which captures bacteria, pollen and other allergens. MFZ-KT SERIES Simple and elegant design The floor standing units have a design characterized by simple lines and flat surfaces that give elegance and modernity to the aesthetics and allow them to be combined perfectly with any type of furniture. High heating capacity The MFZ-KT model has a high capacity in heating mode compared to traditional air conditioners, which makes it suitable for winter and mid-season use. Multi-flow vane The delivery vent is characterized by the presence of three different deflectors, each with a profile specifically designed to optimize the distribution of the outgoing air, maximizing comfort in both cooling and heating. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€3.365,00
Midea Midea Dual Split Inverter Air Conditioner All Easy Pro Series 12+12 With M2od-18hfn8-Q R-32 Integrated Wi-Fi 12000+12000
Technical features Indoor Units Model Indoor Unit Catalog Code : 2x MSEPBU-12HRFN8 EAN: 8052705161854E12 Power : 12000 Btu Cooling Capacity: 3.50 kW Heating Capacity: : 3.80 kW Air flow: 290~560 m 3 /h Sound Power Level : 59 dB(A) Sound pressure level : 22~40 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (LxWxH): 795x225x295 mm Indoor Unit Weight: 10.2 Kg Integrated Wi-Fi Outdoor Unit External Unit Catalog Code: M2OD-18HFN8-Q EAN : 8052705160093 Connectable Indoor Units : 2 Energy efficiency: SEER : 6.1 SCOP : 4 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual energy consumption in Cooling : 304 kWh/a Annual energy consumption in Heating : 1537 kWh/a Performance: Cooling Capacity: 5.28 kW Heating Capacity: 5.57 kW Std Cooling Absorption : 1630 W Std Heating Absorption: 1500 W Sound power level : 65 dB(A) Sound pressure level : 56 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -15° ~ 24°C Installation Data: Pipe diameter Liquid : 6.35 mm (1/4") x2 Gas pipe diameter : 9.52 mm (3/8") x2 Maximum piping length: 25 m Indoor unit / outdoor unit maximum height difference: 10 m Outdoor unit in position above indoor units Indoor unit / outdoor unit maximum height difference: 15 m Outdoor unit in lower position than indoor units Dimensions: External Unit Dimensions (LxWxH): 800x333x554 mm Weight of Outdoor Unit: 35.5 Kg Midea All Easy Pro Installing the indoor units is quick and easy, thanks to the graduated installation plate with integrated spirit level and support bracket. The functional components can be disassembled in less than 1 minute. All Easy Pro is equipped with the Eco Eye function which allows you to check the presence of people in the rooms, activating an energy-saving work cycle when they are not occupied, to contain energy consumption. When using the product in dehumidification mode, it is possible to set a desired relative humidity value for the environment, so as not to dry the air excessively Simplified installation and maintenance A series of functions that allow you to install the product in less time. All functional parts of the unit can be removed with a few simple operations to facilitate cleaning and maintenance of the product Intelligent eye By pressing a button on the remote control, a sensor checks for the presence of people in the room and, if no movement is detected in the room, a low energy consumption work cycle is activated Smart drying In dehumidification mode, it is possible to set the desired level of relative humidity in the room, in order to avoid excessive drying of the air Quick installation and easy maintenance With Alle Easy Pro everything is easy, just 1 screw and 1 minute. Save 80% maintenance time compared to standard indoor units Fast installation With All Easy Pro, 6' 47 is enough Traditional system 11' 33" Fan disassembly With All Easy Pro 1' 12" is enough Traditional system 17' 37" PCB replacement 1' 3" is enough for assembly 1' 12" is enough for disassembly Positioning and fixing of the plate without measuring tools Quick installation with super thin plate with integrated scale and spirit level 1. Mark guide point A following the instructions on the plate 2. Move the plate down until it meets the reference hole 3. Align the plate with the built-in level and mark the hole on the other side Wiring in just 3 seconds The pipe fixing clip folds to keep the product raised during the connection of the pipes, offering ample space to facilitate all the tightening operations of the fittings Freedom of installation Maximum height difference of the pipes: 25 m Maximum piping length: 50 m A minimum distance from the ceiling of only 5 cm is required Cleaning and hygiene Cleaning the internal fan is easy, thanks to the innovative design that allows disassembly in 1 minute with just 1 screw. So you can save time and money to dedicate yourself to what you love A flexible solution Thanks to the extreme flexibility of All Easy Pro, you can install it at a minimum distance of only 5 cm from the ceiling, allowing for optimal cooling of the room Simplified filter cleaning All Easy Pro is hygienic and practical: 6 magnetic connectors hold the upper filter in position to allow it to be removed and cleaned whenever desired Intelligent Eye Eco Master Intelligent Eye function automatically activates energy saving mode when it detects an empty room, thus reducing energy costs by up to 25% Smart Kit App with voice control With All Easy Pro technology, you can control the air conditioner with your voice or with the Midea Air app Control your climate with your voice The air conditioner is compatible with Amazon Echo, Google Home, Apple HomeKit. Controlling comfort in your own home has never been easier. Thanks to the integration with the latest generation technologies Echo Voice Command by Amazon Alexa, Google Home and Apple HomeKit you can "ask" your air conditioner to do the best for you, with Midea. Mono and Multi Indoor Units The indoor units are multipurpose so that they can be connected in both Mono and Multi configurations. You can therefore decide to install a Mono and add more units in the future. Follow me function The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection Emergency function In the event of a fault in one of the product's sensors, operation can continue in Emergency mode, until the faulty part is replaced Flap orientation memory At each restart, the vertical air deflector automatically adjusts to the last used angle Midea Mutlisplit Outdoor Unit Midea outdoor units are designed with the highest standards, to combine performance and design, thanks to the innovative diamond-cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by Archimedes' screw, contains a newly designed fan, designed to reduce noise to a minimum. Finally, the T-shaped rib on the upper panel allows for greater strength and stability Free Combination The units of the Multi range can be combined with different types of indoor units of different sizes, in order to obtain the most correct configuration for the installation environment Condensation control The units of the Multi line can operate in cooling mode even at low outside temperatures to air-condition all rooms where cooling is needed even in the winter season Low noise The adoption of new compressors and latest generation sound-absorbing materials allows the units of the Multi range to be very silent Electronically controlled expansion valves The refrigerant flow directed to each indoor unit is managed through an electronically controlled expansion valve, in order to obtain maximum precision in the management of the refrigerant flow Long piping length The outdoor units of the multi range admit a long piping length and a very high difference in height Diamond Design Outdoor Unit Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Diagnostic Monitor The units have an alphanumeric display which, in addition to indicating the fault codes, allows you to read all the operating parameters of the system to simplify maintenance and assistance operations Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€1.119,00
Midea Midea Trial Split Inverter Air Conditioner Air Conditioner All Easy Pro 9+9+12 Series With M3of-27hfn8-Q R-32 Integrated Wi-Fi 9000+9000+12000
Technical features Indoor Units 1) Model Indoor Unit Catalog Code : 2x MSEPBU-09HRFN8 EAN: 8052705161830 Power : 9000 Btu Cooling Capacity: 2.60 kW Heating Capacity: : 2.80 kW Air flow: 290~560 m 3 /h Sound Power Level : 59 dB(A) Sound pressure level : 22~40 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (LxWxH): 795x225x295 mm Indoor Unit Weight: 10.2 Kg Integrated Wi-Fi 2) Model Indoor Unit Catalog Code : 1x MSEPBU-12HRFN8 EAN: 8052705161854E12 Power : 12000 Btu Cooling Capacity: 3.50 kW Heating Capacity: : 3.80 kW Air flow: 290~560 m 3 /h Sound Power Level : 59 dB(A) Sound pressure level : 22~40 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (LxWxH): 795x225x295 mm Indoor Unit Weight: 10.2 Kg Integrated Wi-Fi Outdoor Unit Outdoor Unit Catalog Code: M3OF-27HFN8-Q EAN : 8052705160116 Connectable Indoor Units : 3 Energy efficiency: SEER : 6.1 SCOP : 4 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual energy consumption in Cooling : 453 kWh/a Annual energy consumption in Heating : 1993 kWh/a Performance: Cooling Capacity: 7.91 kW Heating Capacity: 8.21 kW Std Cooling Absorption : 2450 W Heating Std Absorption: 2200 W Sound power level : 67 dB(A) Sound pressure level : 54 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -15° ~ 24°C Installation data: Pipe diameter Liquid : 6.35 mm (1/4") x3 Gas pipe diameter : 9.52 mm (3/8") x3 Maximum piping length: 30 m Indoor unit / outdoor unit maximum height difference: 10 m Outdoor unit in position above indoor units Indoor unit / outdoor unit maximum height difference: 15 m Outdoor unit in lower position than indoor units Dimensions: External Unit Dimensions (LxWxH): 845x363x702 mm Weight of Outdoor Unit: 51.1 Kg Midea All Easy Pro Installing the indoor units is quick and easy, thanks to the graduated installation plate with integrated spirit level and support bracket. The functional components can be disassembled in less than 1 minute. All Easy Pro is equipped with the Eco Eye function which allows you to check the presence of people in the rooms, activating an energy-saving work cycle when they are not occupied, to contain energy consumption. When using the product in dehumidification mode, it is possible to set a desired relative humidity value for the environment, so as not to dry the air excessively Simplified installation and maintenance A series of functions that allow you to install the product in less time. All functional parts of the unit can be removed with a few simple operations to facilitate cleaning and maintenance of the product Intelligent eye By pressing a button on the remote control, a sensor checks for the presence of people in the room and, if no movement is detected in the room, a low energy consumption work cycle is activated Smart drying In dehumidification mode, it is possible to set the desired level of relative humidity in the room, in order to avoid excessive drying of the air Quick installation and easy maintenance With Alle Easy Pro everything is easy, just 1 screw and 1 minute. Save 80% maintenance time compared to standard indoor units Fast installation With All Easy Pro, 6' 47 is enough Traditional system 11' 33" Fan disassembly With All Easy Pro 1' 12" is enough Traditional system 17' 37" PCB replacement 1' 3" is enough for assembly 1' 12" is enough for disassembly Positioning and fixing of the plate without measuring tools Quick installation with super thin plate with integrated scale and spirit level 1. Mark guide point A following the instructions on the plate 2. Move the plate down until it meets the reference hole 3. Align the plate with the built-in level and mark the hole on the other side Wiring in just 3 seconds The pipe fixing clip folds to keep the product raised during the connection of the pipes, offering ample space to facilitate all the tightening operations of the fittings Freedom of installation Maximum height difference of the pipes: 25 m Maximum piping length: 50 m A minimum distance from the ceiling of only 5 cm is required Cleaning and hygiene Cleaning the internal fan is easy, thanks to the innovative design that allows disassembly in 1 minute with just 1 screw. So you can save time and money to dedicate yourself to what you love A flexible solution Thanks to the extreme flexibility of All Easy Pro, you can install it at a minimum distance of only 5 cm from the ceiling, allowing for optimal cooling of the room Simplified filter cleaning All Easy Pro is hygienic and practical: 6 magnetic connectors hold the upper filter in position to allow it to be removed and cleaned whenever desired Intelligent Eye Eco Master Intelligent Eye function automatically activates energy saving mode when it detects an empty room, thus reducing energy costs by up to 25% Smart Kit App with voice control With All Easy Pro technology, you can control the air conditioner with your voice or with the Midea Air app Control your climate with your voice The air conditioner is compatible with Amazon Echo, Google Home, Apple HomeKit. Controlling comfort in your own home has never been easier. Thanks to the integration with the latest generation technologies Echo Voice Command by Amazon Alexa, Google Home and Apple HomeKit you can "ask" your air conditioner to do the best for you, with Midea. Mono and Multi Indoor Units The indoor units are multipurpose so that they can be connected in both Mono and Multi configurations. You can therefore decide to install a Mono and add more units in the future. Follow me function The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection Emergency function In the event of a fault in one of the product's sensors, operation can continue in Emergency mode, until the faulty part is replaced Flap orientation memory At each restart, the vertical air deflector automatically adjusts to the last used angle Midea Mutlisplit Outdoor Unit Midea outdoor units are designed with the highest standards, to combine performance and design, thanks to the innovative diamond-cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by Archimedes' screw, contains a newly designed fan, designed to reduce noise to a minimum. Finally, the T-shaped rib on the upper panel allows for greater strength and stability Free Combination The units of the Multi range can be combined with different types of indoor units of different sizes, in order to obtain the most correct configuration for the installation environment Condensation control The units of the Multi line can operate in cooling mode even at low outside temperatures to air-condition all rooms where cooling is needed even in the winter season Low noise The adoption of new compressors and latest generation sound-absorbing materials allows the units of the Multi range to be very silent Electronically controlled expansion valves The refrigerant flow directed to each indoor unit is managed through an electronically controlled expansion valve, in order to obtain maximum precision in the management of the refrigerant flow Long piping length The outdoor units of the multi range admit a long piping length and a very high difference in height Diamond Design Outdoor Unit Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Diagnostic Monitor The units have an alphanumeric display which, in addition to indicating the fault codes, allows you to read all the operating parameters of the system to simplify maintenance and assistance operations Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€1.484,00
Toshiba Dual Split Inverter Air Conditioner Toshiba Mirai R32 13000+13000 With Ras-2m14u2avg-E 13+13 Btu
Dual Split Inverter Air Conditioner Toshiba Mirai R32 13000+13000 with RAS-2M14U2AVG-E 13+13 BTU Model: Indoor unit catalog number : RAS-13BKVG-E Typology : R-32 inverter OUTDOOR UNIT Product code: RAS-2M14U2AVG-E Performance Cooling Nominal capacity kW 4.00 SEER 6.73 Energy class A++ Performance Heating Rated capacity kW 4.4 SCOP 4.6 Energy class A++ Performance Sound pressure level (C - H) dB(A) 45 - 46 Sound power level (C - H) dB(A) 58 - 59 Dimensions (HxWxD) mm 630 x 800 x 300 General characteristics Mirai R-32 MIRAI is an innovative product offered in two versions both with the traditional R410A refrigerant and with the low GWP and environmentally friendly R32 with a quantity of refrigerant reduced by up to 30% compared to the previous product. Bringing the different powers available to as many as 5, the range is enriched by the new size 5, with a nominal capacity of 1.5 kW, suitable for small rooms or rooms with a high level of insulation. Like the other units in the residential series, the new MIRAI unit allows the user to maximize his well-being: with a sound pressure level of only 22 dB(A) and with the coil which has been coated with a protective layer to prevent dust and impurities settle on the surface, improving its cleanliness and performance over time. Significant energy savings : In line with all Toshiba products, the MIRAI wall mounted unit boasts low energy consumption. The energy efficiency class is at least A+ in both heating and cooling modes for both R32 and R410A versions, guaranteeing exceptional energy savings and unprecedented levels of comfort. Not only that, consumption is so low that the minimum level can go down to just 120 W. Elegant design : The modern and rounded aesthetics, the shiny and reflective material, the compact front and the white LEDs, make MIRAI a perfect fusion of aesthetics and technology. With its understated appearance, flowing lines, and finish, it is truly a high-tech decorative ornament. Whether on or off, its harmonious design and very compact size (only 799mm long) blends seamlessly into any décor. Designed in Japan, quality and reliability: Innovation, efficiency, high reliability, energy saving, respect for the environment... these are the key values at the heart of Toshiba's DNA. For over 50 years, Toshiba has ensured its customers the guarantee of the precision and expertise of Japanese high technology. The new MIRAI system was designed and developed in high-performance study centers and test laboratories, offering unbeatable comfort and exceptional energy savings. Silence! Comfort and well-being: MIRAI guarantees the best well-being of the rooms thanks to its silence. Great care was taken during development to keep the sound level to a minimum. And this makes the new wall-mounted unit one of the quietest in its category: down to just 22 dB(A). T he future is now : Technological, elegant, highly effective and environmentally friendly, the new Toshiba wall mounted unit proudly upholds the values that form the essence of its name: MIRAI means FUTURE in Japanese. Thanks to the connection with the home or office Wi-Fi network , it allows remote control of the air conditioner, directly from smartphones, tablets and PCs. (Optional) . Product Guarantee All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.
€1.078,00
Toshiba Dual Split Inverter Air Conditioner Toshiba Mirai R32 13000+13000 With Ras-2m18u2avg-E 13+13 Btu
Dual Split Inverter Air Conditioner Toshiba Mirai R32 13000+13000 with RAS-2M18U2AVG-E 13+13 BTU 1) Model: Indoor unit catalog number : RAS-13BKVG-E Typology : R-32 inverter Dimensions HxWxD 293x798x230 mm; Weight: 9.0 Kg OUTDOOR UNIT Product code: RAS-2M18U2AVG-E Performance Cooling Rated capacity kW 5.2 SEER 6.90 Energy class A++ Performance Heating Rated capacity kW 5.6 SCOP 4.6 Energy class A++ Performance Sound pressure level (C - H) dB(A) 47 - 50 Sound power level (C - H) dB(A) 62 - 63 Dimensions (HxWxD) mm 630 x 800 x 300; 46 kgs Mirai R-32 MIRAI is an innovative product offered in two versions both with the traditional R410A refrigerant and with the low GWP and environmentally friendly R32 with a quantity of refrigerant reduced by up to 30% compared to the previous product. Bringing the different powers available to as many as 5, the range is enriched by the new size 5, with a nominal capacity of 1.5 kW, suitable for small rooms or rooms with a high level of insulation. Like the other units in the residential series, the new MIRAI unit allows the user to maximize his well-being: with a sound pressure level of only 22 dB(A) and with the coil which has been coated with a protective layer to prevent dust and impurities settle on the surface, improving its cleanliness and performance over time Elegant design The modern and rounded aesthetics, the glossy and reflective material, the compact front and the white LEDs, make MIRAI a perfect fusion of aesthetics and technology. With its understated appearance, flowing lines, and finish, it is truly a high-tech decorative ornament. Whether on or off, its harmonious design and very compact size (only 799mm long) blends seamlessly into any décor. Designed in Japan, quality and reliability Innovation, efficiency, high reliability, energy saving, respect for the environment... these are the key values at the heart of Toshiba's DNA. For over 50 years, Toshiba has ensured its customers the guarantee of the precision and expertise of Japanese high technology. The new MIRAI system was designed and developed in high-performance study centers and test laboratories, offering unbeatable comfort and exceptional energy savings. Silence! Comfort and well-being MIRAI guarantees the best well-being of the rooms thanks to its silence. Great care was taken during development to keep the sound level to a minimum. And this makes the new wall-mounted unit one of the quietest in its category: down to just 22 dB(A). Significant energy savings In line with all Toshiba products, the MIRAI wall unit boasts low power consumption. The energy efficiency class is at least A+ in both heating and cooling modes for both R32 and R410A versions, guaranteeing exceptional energy savings and unprecedented levels of comfort. Not only that, consumption is so low that the minimum level can drop to just 120 W. The future is now Technological, elegant, highly effective and environmentally friendly, the new Toshiba wall mounted unit proudly upholds the values that form the essence of its name: MIRAI means FUTURE in Japanese. Thanks to the connection with the home or office Wi-Fi network , it allows remote control of the air conditioner, directly from smartphones, tablets and PCs. (optional) Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.
€1.209,00
HAIER Haier Flexis White Series Split Inverter Air Conditioner 7000+12000+12000+12000 Btu With 4u85s2sr2fa Integrated Wifi R-32 Wi-Fi 7+12+12+12 - New
Technical features Indoor unit 1)Model: Catalog code White model: AS20S2SF1FA-MW x 1 Power: 7000 Btu/h Dimensions WxDxH 866x196x301 mm; 9.5 kgs Standard YR-HQ remote control Integrated Wi-Fi 2)Model: Catalog code White model: AS35S2SF1FA-MW x 3 Power: 12000 Btu/h Dimensions WxDxH 866x196x301 mm; 9.5 kgs Standard YR-HQ remote control Integrated Wi-Fi Outdoor unit Model: Catalog code: 4U85S2SR2FA Max indoor units: 4 Energy efficiency RAFF energy class. SEER 7.0 (A++) Energy class RISC. SCOP 4.0 (A+) Annual energy consumption RAFF kWh/a 456 Annual RISC energy consumption kWh/a 2503 Performance Nom COOL output power (min~max) kW 8.5 (3.2~9.5) Nom RISC output power (min~max) kW 9.6 (4.4-10.7) COOL absorbed power. rated kW 2.5 HEATING absorbed power. rated kW 2.4 Sound power dB(A) 68 Sound pressure dB(A) 55 Treated air volume 4000 m3h Power supply 230-1-50V-Ph-Hz Hydraulic data R32 refrigerant Liquid/gas pipe Ø mm 4x6.35 / 3x9.52 + 12.7 Total pipe length max m 70 Single EU-UI line max piping length m 25 Max height difference IU - UE m 15 Max height difference IU - IU m 7.5 Function limits: - COOL. min~max °C -10÷46°C - HEAT. min~max °C -15÷24°C Dimensions Dimensions WxDxH mm 890x340x700 ; 61 kgs FLEXIS extension The new Haier FLEXIS internal unit is available in Matt White and Matt Black , i.e. matt white and matt anthracite grey. It supports R32 gas which at the moment represents the best in yields and reduced environmental impact on the greenhouse effect, it is easy to use thanks to a complete and intuitive remote control, and a refined and pleasant aesthetic which thanks to the opaque color is very modern and integrates well into the home environment. The performance is top notch from all points of view and the use of DC fans combined with design optimization can reduce noise up to 16d B(A ) , practically imperceptible to the human ear. Haier FLEXIS is equipped with a double motion sensor with an angle of 120° and a reading up to 8m. distance, which ensures a comfortable air flow by detecting the presence of people in the room according to your needs. In fact, the "follow" or "avoid" functions can be set. The air deflectors are also adjustable by remote control both for the classic movement on the horizontal axis and on the vertical ones to direct the flow to the right or to the left as desired. To the delight of the installer, Haier FLEXIS was designed with criteria that facilitate assembly by reducing installation times and simplifying the steps to be done for the hydraulic and electrical connections and was born in an inverter heat pump with high energy efficiency and with all the characteristics necessary to take advantage of the tax breaks provided for by the legislature for 2019. Eco Sensor Double motion sensor Double motion sensor capable of covering an area of 120° (2 direction area horizontally). Maximum detection distance 8m. Quietness The noise level of the indoor unit is 19 dB(A) The use of DC Inverter fans and design optimization decrease the noise level of the indoor units. With the Quiet setting the level of only 19dB(A) is reached. Easy installation 1. Easy installation of the mounting template Thanks to detailed instructions, the mounting template can be installed quickly and easily. 2. Easy clip Easier to install due to the additional support clip, which increases the working space. 3. Quick and easy repair of the PCB and motor Allows the removal and maintenance of the PCB and motor without the need to disassemble the unit and the evaporator. 4. More space for piping reduces installation time by increasing the operating space for easy access to piping and electrical connection area. 6. Removable bottom panel Allows the installer to connect pipes and cables with more operating space Wifi Allows you to set the air conditioner remotely even when you are away Easy installations Eco Sensor 16dB(A) Wi-Fi as standard Energy class in cooling: A+++ Energy class in heat pump: A++ Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€2.557,00
FERROLI Air Conditioner Ferroli Dual Split Inverter Ambra Series M 7+9 With 18-2 R-32 Integrated Wi-Fi 7000+9000 - New
Technical features Indoor units: 1) Model: Indoor unit catalog code : Amber M 20 Power (BTU/h) 7000 Indoor Unit HxWxD (mm): 285 x 805 x 194 ; 7.5kg 2) Model: Indoor unit catalog code : Amber M 25 Power (BTU/h) 9000 Indoor Unit HxWxD (mm): 285 x 805 x 194 ; 7.5kg Outdoor Unit: Model: Outdoor unit catalog code : 18-2 Energy efficiency: SEER/SCOP (W/W): 6.1/3.80 Energy Efficiency Class (cooling) : A++ Energy Efficiency Class (heating): A Performance: Nominal cooling capacity (kW): 4.2 Nominal heating capacity (kW): 5 Min-max outdoor unit sound pressure (dB-A): 54 Nominal sound power dB(A): 65 Characteristics: Power supply (V/Hz/F): 220/240 - 50 - 1 Phase Refrigerant gas : R-32 Dimensions: HxWxD (mm) : 554 x 800 (70) x 333; 35 kg AMBER M > GENERAL FEATURES: - Ecological refrigerant R32 - Class of Efficiency A++ and A+++ - Double filtering with “Cold Catalyst” and “Biohepa” - Remote control with dedicated smartphone App - Temperature visualization on the display on the machine - Equipped with DC inverter technology - Indoor unit with a particularly attractive and modern design - External unit equipped with connection cap and soundproof hood - Easily removable suction grille and filters for quick cleaning - Automatic reset in case of voltage drop - Night operating mode - "AUTOMATIC" operating mode - Timer function - Outdoor unit treated with anti-rust protective substances - Wi-Fi connectivity as standard THERE IS NEW AIR IN FERROLI Thanks to the optimized refrigerant circuit and the regulation that modulates the compressor with DC inverter technology, these machines are able to precisely and punctually follow your temperature setpoints, both in hot and cold. This translates into reduced noise, maximum comfort and top efficiency, saving you kilowatt hours of electricity on your bill. The mono-split versions of Ambra, for example, never go below class A++. Furthermore, they use R32 refrigerant, an ecologically more sustainable gas: it does not affect the ozone layer and has a GWP of about a third compared to the more classic R410A. All Ambras can then connect to your Wi-Fi, as standard, without expensive accessories. Thanks to our free App, you can manage and program them easily and remotely. But that's not all, a double stage of filtration and an advanced treatment for the external battery are also included to protect it for a long time from atmospheric agents. With regard to air quality, Ambra air conditioners, both in the Mono and Multi Split versions, are fitted with a double filtration stage, consisting of a "Cold Catalyst" filter plus a "Biohepa" filter. Col Catalyst Filter: This filter has active action against volatile organic compounds (TVOC), formaldehyde, ammonia, and sulfuric acid (or hydrogen sulphide). Biohepa filter: This filter instead manages to filter very small dust particles, bacteria and fungi; made up of special enzymes, it counteracts its proliferation. LIMITS ON LENGTH AND DIFFERENCE IN LEVEL OF REFRIGERANT PIPES The length of the refrigerant pipes between the indoor and outdoor units must be as short as possible, and is in any case limited by respecting the maximum height difference values between the units. By decreasing the difference in height between the units (H1,H2) and the length of the pipes (L), the load losses will be limited, consequently increasing the overall efficiency of the machine. Respect the limits shown in the following tables. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€700,00
Midea Midea Trial Split Inverter Air Conditioner Air Conditioner All Easy Pro 9+9+18 Series With M3of-27hfn8-Q R-32 Integrated Wi-Fi 9000+9000+18000
Technical features Indoor Units 1) Model Indoor Unit Catalog Code : 2x MSEPBU-09HRFN8 EAN: 8052705161830 Power : 9000 Btu Cooling Capacity: 2.60 kW Heating Capacity: : 2.80 kW Air flow: 290~560 m 3 /h Sound Power Level : 59 dB(A) Sound pressure level : 22~40 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (LxWxH): 795x225x295 mm Indoor Unit Weight: 10.2 Kg Integrated Wi-Fi 2) Model Indoor Unit Catalog Code : 1x MSEPCU-18HRFN8 EAN: 8052705161960 Power : 18000 Btu Cooling Capacity: 5.30 kW Heating Capacity: : 5.80 kW Air flow rate: 400~685 m 3 /h Sound Power Level : 59 dB(A) Sound pressure level : 23~41 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 12.70 mm (1/2") Internal Unit Dimensions (LxWxH): 965x239x319 mm Indoor Unit Weight: 12.3 Kg Integrated Wi-Fi Outdoor Unit Outdoor Unit Catalog Code: M3OF-27HFN8-Q EAN : 8052705160116 Connectable Indoor Units : 3 Energy efficiency: SEER : 6.1 SCOP : 4 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual energy consumption in Cooling : 453 kWh/a Annual energy consumption in Heating : 1993 kWh/a Performance: Cooling Capacity: 7.91 kW Heating Capacity: 8.21 kW Std Cooling Absorption : 2450 W Heating Std Absorption: 2200 W Sound power level : 67 dB(A) Sound pressure level : 54 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -15° ~ 24°C Installation data: Pipe diameter Liquid : 6.35 mm (1/4") x3 Gas pipe diameter : 9.52 mm (3/8") x3 Maximum piping length: 30 m Indoor unit / outdoor unit maximum height difference: 10 m Outdoor unit in position above indoor units Indoor unit / outdoor unit maximum height difference: 15 m Outdoor unit in lower position than indoor units Dimensions: External Unit Dimensions (LxWxH): 845x363x702 mm Weight of Outdoor Unit: 51.1 Kg Midea All Easy Pro Installing the indoor units is quick and easy, thanks to the graduated installation plate with integrated spirit level and support bracket. The functional components can be disassembled in less than 1 minute. All Easy Pro is equipped with the Eco Eye function which allows you to check the presence of people in the rooms, activating an energy-saving work cycle when they are not occupied, to contain energy consumption. When using the product in dehumidification mode, it is possible to set a desired relative humidity value for the environment, so as not to dry the air excessively Simplified installation and maintenance A series of functions that allow you to install the product in less time. All functional parts of the unit can be removed with a few simple operations to facilitate cleaning and maintenance of the product Intelligent eye By pressing a button on the remote control, a sensor checks for the presence of people in the room and, if no movement is detected in the room, a low energy consumption work cycle is activated Smart drying In dehumidification mode, it is possible to set the desired level of relative humidity in the room, in order to avoid excessive drying of the air Quick installation and easy maintenance With Alle Easy Pro everything is easy, just 1 screw and 1 minute. Save 80% maintenance time compared to standard indoor units Fast installation With All Easy Pro, 6' 47 is enough Traditional system 11' 33" Fan disassembly With All Easy Pro 1' 12" is enough Traditional system 17' 37" PCB replacement 1' 3" is enough for assembly 1' 12" is enough for disassembly Positioning and fixing of the plate without measuring tools Quick installation with super thin plate with integrated scale and spirit level 1. Mark guide point A following the instructions on the plate 2. Move the plate down until it meets the reference hole 3. Align the plate with the built-in level and mark the hole on the other side Wiring in just 3 seconds The pipe fixing clip folds to keep the product raised during the connection of the pipes, offering ample space to facilitate all the tightening operations of the fittings Freedom of installation Maximum height difference of the pipes: 25 m Maximum piping length: 50 m A minimum distance from the ceiling of only 5 cm is required Cleaning and hygiene Cleaning the internal fan is easy, thanks to the innovative design that allows disassembly in 1 minute with just 1 screw. So you can save time and money to dedicate yourself to what you love A flexible solution Thanks to the extreme flexibility of All Easy Pro, you can install it at a minimum distance of only 5 cm from the ceiling, allowing for optimal cooling of the room Simplified filter cleaning All Easy Pro is hygienic and practical: 6 magnetic connectors hold the upper filter in position to allow it to be removed and cleaned whenever desired Intelligent Eye Eco Master Intelligent Eye function automatically activates energy saving mode when it detects an empty room, thus reducing energy costs by up to 25% Smart Kit App with voice control With All Easy Pro technology, you can control the air conditioner with your voice or with the Midea Air app Control your climate with your voice The air conditioner is compatible with Amazon Echo, Google Home, Apple HomeKit. Controlling comfort in your own home has never been easier. Thanks to the integration with the latest generation technologies Echo Voice Command by Amazon Alexa, Google Home and Apple HomeKit you can "ask" your air conditioner to do the best for you, with Midea. Mono and Multi Indoor Units The indoor units are multipurpose so that they can be connected in both Mono and Multi configurations. You can therefore decide to install a Mono and add more units in the future. Follow me function The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection Emergency function In the event of a fault in one of the product's sensors, operation can continue in Emergency mode, until the faulty part is replaced Flap orientation memory At each restart, the vertical air deflector automatically adjusts to the last used angle Midea Mutlisplit Outdoor Unit Midea outdoor units are designed with the highest standards, to combine performance and design, thanks to the innovative diamond-cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by Archimedes' screw, contains a newly designed fan, designed to reduce noise to a minimum. Finally, the T-shaped rib on the upper panel allows for greater strength and stability Free Combination The units in the Multi range can be combined with different types of indoor units of different sizes, in order to obtain the most correct configuration for the installation environment Condensation control The units of the Multi line can operate in cooling mode even at low outside temperatures to air-condition all rooms where cooling is needed even in the winter season Low noise The adoption of new compressors and latest generation sound-absorbing materials allows the units of the Multi range to be very silent Electronically controlled expansion valves The refrigerant flow directed to each indoor unit is managed through an electronically controlled expansion valve, in order to obtain maximum precision in the management of the refrigerant flow Long piping length The outdoor units of the multi range admit a long piping length and a very high difference in height Diamond Design Outdoor Unit Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Diagnostic Monitor The units have an alphanumeric display which, in addition to indicating the fault codes, allows you to read all the operating parameters of the system to simplify maintenance and assistance operations Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€1.645,00