Caratteristiche tecniche Unità interne 1) Modello Codice catalogo unità interna : 1x ACT26UR4RCC8 Codice pannello : PE-QEA-LD Potenza: 9000 Btu Capacità raffreddamento : 2,6 kW Capacità riscaldamento : 3,2 kW Livello potenza sonora : 54 dB(A) Livello pressione sonora : 30~38 dB(A) Diametro tubazioni liquido : 6,35 mm (1/4") Diametro tubazioni gas : 9,52 mm (3/8") Dimensioni unità interna (LxAxP) : 570x215x570 mm Peso unità interna : 15,5 Kg Dimensioni pannello (LxAxP) : 620x40x620 mm Peso pannello : 2,6 Kg Telecomando di serie Scheda Wi-Fi : AEH-W4GX Comando a filo : YXE-C01U 2) Modello Codice catalogo unità interna : 1x ACT35UR4RCC8 Codice pannello : PE-QEA-LD Potenza: 12000 Btu Capacità raffreddamento : 3,5 kW Capacità riscaldamento : 4,0 kW Livello potenza sonora : 54 dB(A) Livello pressione sonora : 30~38 dB(A) Diametro tubazioni liquido : 6,35 mm (1/4") Diametro tubazioni gas : 9,52 mm (3/8") Dimensioni unità interna (LxAxP) : 570x215x570 mm Peso unità interna : 15,5 Kg Dimensioni pannello (LxAxP) : 620x40x620 mm Peso pannello : 2,6 Kg Telecomando di serie Scheda Wi-Fi : AEH-W4GX Comando a filo : YXE-C01U Unità esterna Codice catalogo unità esterna : 2AMW42U4RGC Numero di unità interne collegabili : Fino a 2 unità interne Efficienza energetica SEER : 7,6 SCOP : 4,4 Classe di efficienza energetica raffreddamento : A++ Classe di efficienza energetica riscaldamento : A+ Consumo energetico annuo in raffreddamento : 189 kWh/a Consumo energetico annuo in riscaldamento : 1114 kWh/a Performance Capacità raffreddamento : 4,1 kW Capacità riscaldamento : 4,5 kW Assorbimento raffreddamento : 0,95 kW Assorbimento riscaldamento: 0,95 kW Livello potenza sonora : 58 dB(A) Livello pressione sonora : 47~53 dB(A) Dati elettrici Alimentazione (V/Hz/Ø) : 220~240/50/1 Gas refrigerante : R-32 Range temperature garantito:- Raffreddamento: -15° ~ 50° C- Riscaldamento: -20° ~ 24° C Dati installativi Diametro tubi liquido : 6,35 mm (1/4") x2 Diametro tubi gas : 9,52 mm (3/8") x2 Lunghezza massima tubazioni : 30 m Dislivello massimo tra unità interna ed unità esterna : 15 m Dimensioni e peso Dimensioni unità esterna (LxAxP) : 715x540x240 mm Peso unità esterna : 28,5 Kg Garanzia di 3 anni (5 sul compressore) La garanzia di Hisense Italia può essere attivata entro 1 mese dalla data di acquisto all’indirizzo http://www.hisenseitalia.it/clima/supporto Tecnologie unità esterna multisplit Alta efficienza compressore inverter DC Twin Rotary La progettazione del nuovo compressore BLDC Inverter a doppio rotore garantisce un miglior bilanciamento ed una riduzione delle vibrazioni. Ciò si traduce nel massimo livello di silenziosità ed in un’ottima resa in termini di ecienza e risparmio energetico. Full DC inverter La tecnologia Hisense Inverter Expert garantisce elevata effi cienza e ridotto livello sonoro grazie all’azione combinata del compressore DC Inverter, del motore ventola DC Inverter e della valvola di espansione elettronica Compatto e versatile Le dimensioni delle nuove unità esterne Free Match sono state ridotte del 10% per consentirne l’installazione anche in spazi ridotti. Massimo comfort anche d'inverno L’unità esterna utilizza una valvola di espansione elettronica che regolare ottimizza la quantità di refrigerante di tutte le unità interne funzionanti. Super riscaldamento Le nuove unità esterne Free Match garantiscono il massimo dell’efficienza anche a basse temperature, fino a-20° Tecnologia drive DC con onda sinusoidale a 180° Il sistema monitora constantemente la fredquenza del compressore e crea la forma d'onda più efficiente per determinare un effettivo risparmio dei consumi. Controllo curva Compressore con magnete al rubidio Grazie alla maggior compressione delle molecole di gas il compressore con magnete al rubidio garantisce maggior efficienza e minori assorbimenti Valvola di espansione elettronica L’unità esterna utilizza una valvola di espansione elettronica che regola e ottimizza la quantità di refrigerante di tutte le unità interne funzionanti. Funzionamento con ampio range di voltaggio L’unità esterna può funzionare con una tensione da 176V a 264V. Nei nuovi modelli l’utilizzo di una tecnica di regolazione automatica del voltaggio garantisce che il valore di protezione si regoli in base ad esso, mantenendo la frequenza di funzionamento ad un valore ottimale. Design dello scambiatore: progettato per migliorarne l’efficienza Il design dello scambiatore esterno è stato progettato per aumentare il trasferimento di calore in maniera tale da rendere più efficiente il circuito frigorifero ed evitare a creazione di blocchi di ghiaccio. Ulteriore vantaggio è quello di poter sostenere connessioni a lunga distanza tra unità esterna ed unità interne senza ridurre la capacità di raffreddamento. Gas ecologico Più efficiente e migliore per l’ambiente L'R32 è un gas ecologico con una maggiore capacità frigorifera a parità di volume. Ciò significa che è necessaria una quantità minore di refrigerante in ciascun dispositivo, riducendo così il riscaldamento globale. I vantaggi del gas R32 sono che non ha alcun effetto sull'ozono nell'aria, GWP (impatto sul riscaldamento globale) inferiore del 66% rispetto al gas R410A, maggiore efficienza energetica, maggiore conduttività termica e maggiore capacità di raffreddamento. Nuova cassetta Hisense round flow Comfort a 360° Con le nuove unità a cassetta Round Flow è possibile gestire singolarmente ogni aletta tramite il comando remoto in dotazione. Grazie ai movimenti indipendenti dei defl ettori si può controllare il fl usso d’aria in base alle diverse necessità in ambiente 360° round flow Distribuzione uniforme dell'aria. Big louver L’angolo di apertura dei defl ettori può essere regolabile fino a 88° per garantire la distribuzione uniforme dell’aria Design semplice ed elegante Il pannello si contraddistingue per le sue linee semplici ed eleganti che nascondono un display che si attiva all’accensione per consentire di monitare il funzionamento in ogni momento. Struttura compatta Le nuove unità a cassetta Round Flow hanno una struttura molto compatta che misura solo 236 mm Evaporatore ad alta efficienza Le unità montano il nuovo evaporatore dotato di un'ampia superficie di scambio per garantire una maggiore effi cienza senza rinunciare al risparmio energetico Smart Eye (Optional) Il sensore di presenza «Smart Eye», tramite scansione a infrarossi, individua la posizione delle persone in ambiente e regola il flusso d’aria di conseguenza. Se non viene rilevata nessuna presenza, il climatizzatore passa automaticamente in modalità risparmio energetico Molteplici possibilità di controllo Le unità a cassetta sono fornite con un pratico telecomando ma è possible controllare l’unità con un comando cablato YXEE01U(E) o tramite Wi-Fi AEH-W4GX da acquistare separatamente. Controllo Wi-Fi intelligente I climatizzatori Hisense si gestiscono comodamente dentro e fuori casa con un dispositivo mobile e una connessione Wi-Fi. ConnectLife è la app semplice da usare e con un’interfaccia intuitiva che permette di controllare il climatizzatore ovunque ci si trovi. L’app è disponibile per iOS e Android. Il funzionamento in modalità Wi-Fi richiede l'installazione delle schede su ciascuna unità interna. Dopo aver scaricato la app e associato il climatizzatore, la app consente di gestire modalità di funzionamento, temperatura, velocità di ventilazione e flusso dell’aria. Dalla sezione «Automazione» è inoltre possibile impostare i timer giornalieri o settimanali Controllo Smart Voice  La nuova app ConnectLife è compatibile con Alexa e Google assistant, grazie all’interazione vocale, è possibile accendere, spegnere, regolare la temperatura e impostare la modalità di funzionamento (rarescamento o riscaldamento). Trovi ConnectLife nelle Skill di Alexa e nel catalogo di Google assistant Garanzia prodotto : La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Caratteristiche tecniche Unità interne Codice catalogo unità interna : 2x ACT35UR4RCC8 Codice pannello : PE-QEA-LD Potenza: 12000 Btu Capacità raffreddamento : 3,5 kW Capacità riscaldamento : 4,0 kW Livello potenza sonora : 54 dB(A) Livello pressione sonora : 30~38 dB(A) Diametro tubazioni liquido : 6,35 mm (1/4") Diametro tubazioni gas : 9,52 mm (3/8") Dimensioni unità interna (LxAxP) : 570x215x570 mm Peso unità interna : 15,5 Kg Dimensioni pannello (LxAxP) : 620x40x620 mm Peso pannello : 2,6 Kg Telecomando di serie Accessori optional Scheda Wi-Fi : AEH-W4GX Comando a filo : YXE-C01U Unità esterna Codice catalogo unità esterna : 3AMW72U4RJC Numero di unità interne collegabili : Fino a 3 unità interne Efficienza energetica SEER : 7,8 SCOP : 4,35 Classe di efficienza energetica raffreddamento : A++ Classe di efficienza energetica riscaldamento : A+ Consumo energetico annuo in raffreddamento : 283 kWh/a Consumo energetico annuo in riscaldamento : 1920 kWh/a Performance Capacità raffreddamento : 7,0 kW Capacità riscaldamento : 8,0 kW Assorbimento raffreddamento : 1,75 kW Assorbimento riscaldamento: 2,00 kW Livello potenza sonora : 68 dB(A) Livello pressione sonora : 54~60 dB(A) Dati elettrici Alimentazione (V/Hz/Ø) : 220~240/50/1 Gas refrigerante : R-32 Range temperature garantito:- Raffreddamento: -15° ~ 50° C- Riscaldamento: -20° ~ 24° C Dati installativi Diametro tubi liquido : 6,35 mm (1/4") x3 Diametro tubi gas : 9,52 mm (3/8") x3 Lunghezza massima tubazioni : 45 m Dislivello massimo tra unità interna ed unità esterna : 15 m Dimensioni e peso Dimensioni unità esterna (LxAxP) : 860x670310 mm Peso unità esterna : 49,0 Kg Garanzia di 3 anni (5 sul compressore) La garanzia di Hisense Italia può essere attivata entro 1 mese dalla data di acquisto all’indirizzo http://www.hisenseitalia.it/clima/supporto Tecnologie unità esterna multisplit Alta efficienza compressore inverter DC Twin Rotary La progettazione del nuovo compressore BLDC Inverter a doppio rotore garantisce un miglior bilanciamento ed una riduzione delle vibrazioni. Ciò si traduce nel massimo livello di silenziosità ed in un’ottima resa in termini di ecienza e risparmio energetico. Full DC inverter La tecnologia Hisense Inverter Expert garantisce elevata effi cienza e ridotto livello sonoro grazie all’azione combinata del compressore DC Inverter, del motore ventola DC Inverter e della valvola di espansione elettronica Compatto e versatile Le dimensioni delle nuove unità esterne Free Match sono state ridotte del 10% per consentirne l’installazione anche in spazi ridotti. Massimo comfort anche d'inverno L’unità esterna utilizza una valvola di espansione elettronica che regolare ottimizza la quantità di refrigerante di tutte le unità interne funzionanti. Super riscaldamento Le nuove unità esterne Free Match garantiscono il massimo dell’efficienza anche a basse temperature, fino a-20° Tecnologia drive DC con onda sinusoidale a 180° Il sistema monitora constantemente la fredquenza del compressore e crea la forma d'onda più efficiente per determinare un effettivo risparmio dei consumi. Controllo curva Compressore con magnete al rubidio Grazie alla maggior compressione delle molecole di gas il compressore con magnete al rubidio garantisce maggior efficienza e minori assorbimenti Valvola di espansione elettronica L’unità esterna utilizza una valvola di espansione elettronica che regola e ottimizza la quantità di refrigerante di tutte le unità interne funzionanti. Funzionamento con ampio range di voltaggio L’unità esterna può funzionare con una tensione da 176V a 264V. Nei nuovi modelli l’utilizzo di una tecnica di regolazione automatica del voltaggio garantisce che il valore di protezione si regoli in base ad esso, mantenendo la frequenza di funzionamento ad un valore ottimale. Design dello scambiatore: progettato per migliorarne l’efficienza Il design dello scambiatore esterno è stato progettato per aumentare il trasferimento di calore in maniera tale da rendere più efficiente il circuito frigorifero ed evitare a creazione di blocchi di ghiaccio. Ulteriore vantaggio è quello di poter sostenere connessioni a lunga distanza tra unità esterna ed unità interne senza ridurre la capacità di raffreddamento. Gas ecologico Più efficiente e migliore per l’ambiente L'R32 è un gas ecologico con una maggiore capacità frigorifera a parità di volume. Ciò significa che è necessaria una quantità minore di refrigerante in ciascun dispositivo, riducendo così il riscaldamento globale. I vantaggi del gas R32 sono che non ha alcun effetto sull'ozono nell'aria, GWP (impatto sul riscaldamento globale) inferiore del 66% rispetto al gas R410A, maggiore efficienza energetica, maggiore conduttività termica e maggiore capacità di raffreddamento. Nuova cassetta Hisense round flow Comfort a 360° Con le nuove unità a cassetta Round Flow è possibile gestire singolarmente ogni aletta tramite il comando remoto in dotazione. Grazie ai movimenti indipendenti dei defl ettori si può controllare il fl usso d’aria in base alle diverse necessità in ambiente 360° round flow Distribuzione uniforme dell'aria. Big louver L’angolo di apertura dei defl ettori può essere regolabile fino a 88° per garantire la distribuzione uniforme dell’aria Design semplice ed elegante Il pannello si contraddistingue per le sue linee semplici ed eleganti che nascondono un display che si attiva all’accensione per consentire di monitare il funzionamento in ogni momento. Struttura compatta Le nuove unità a cassetta Round Flow hanno una struttura molto compatta che misura solo 236 mm Evaporatore ad alta efficienza Le unità montano il nuovo evaporatore dotato di un'ampia superficie di scambio per garantire una maggiore effi cienza senza rinunciare al risparmio energetico Smart Eye (Optional) Il sensore di presenza «Smart Eye», tramite scansione a infrarossi, individua la posizione delle persone in ambiente e regola il flusso d’aria di conseguenza. Se non viene rilevata nessuna presenza, il climatizzatore passa automaticamente in modalità risparmio energetico Molteplici possibilità di controllo Le unità a cassetta sono fornite con un pratico telecomando ma è possible controllare l’unità con un comando cablato YXEE01U(E) o tramite Wi-Fi AEH-W4GX da acquistare separatamente. Controllo Wi-Fi intelligente I climatizzatori Hisense si gestiscono comodamente dentro e fuori casa con un dispositivo mobile e una connessione Wi-Fi. ConnectLife è la app semplice da usare e con un’interfaccia intuitiva che permette di controllare il climatizzatore ovunque ci si trovi. L’app è disponibile per iOS e Android. Il funzionamento in modalità Wi-Fi richiede l'installazione delle schede su ciascuna unità interna. Dopo aver scaricato la app e associato il climatizzatore, la app consente di gestire modalità di funzionamento, temperatura, velocità di ventilazione e flusso dell’aria. Dalla sezione «Automazione» è inoltre possibile impostare i timer giornalieri o settimanali Controllo Smart Voice  La nuova app ConnectLife è compatibile con Alexa e Google assistant, grazie all’interazione vocale, è possibile accendere, spegnere, regolare la temperatura e impostare la modalità di funzionamento (rarescamento o riscaldamento). Trovi ConnectLife nelle Skill di Alexa e nel catalogo di Google assistant Garanzia prodotto : La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Caratteristiche tecniche Unità interne Codice catalogo unità interna : 2x ACT52UR4RCC8 Codice pannello : PE-QEA-LD Potenza: 18000 Btu Capacità raffreddamento : 5,0 kW Capacità riscaldamento : 5,5 kW Livello potenza sonora : 57 dB(A) Livello pressione sonora : 34~42 dB(A) Diametro tubazioni liquido : 6,35 mm (1/4") Diametro tubazioni gas : 12,70 mm (1/2") Dimensioni unità interna (LxAxP) : 570x215x570 mm Peso unità interna : 15,5 Kg Dimensioni pannello (LxAxP) : 620x40x620 mm Peso pannello : 2,6 Kg Telecomando di serie Accessori optional Scheda Wi-Fi : AEH-W4GX Comando a filo : YXE-C01U Unità esterna Codice catalogo unità esterna : 4AMW105U4RAA Numero di unità interne collegabili : Fino a 4 unità interne Efficienza energetica SEER : 6,50 SCOP : 4,01 Classe di efficienza energetica in raffreddamento : A++ Classe di efficienza energetica in riscaldamento : A+ Consumo energetico annuo raffreddamento : 538 kWh/a Consumo energetico annuo riscaldamento : 2793 kWh/a Performance Capacità raffreddamento : 10 kW Capacità riscaldamento : 11 kW Assorbimento in raffreddamento : 3,1 kW  Assorbimento in riscaldamento : 2,8 kW Livello potenza sonora : 68 dB(A) Livello pressione sonora : 54~60 dB(A) Dati elettrici Alimentazione (V/Hz/Φ) : 220~240/50/1      Gas refrigerante : R-32 Range temperature garantito: - Raffreddamento: -15° ~ 48° C - Riscaldamento: -15° ~ 24° C Dati installativi Diametro tubi liquido : 6,35 mm (1/4") x4 Diametro tubi gas : 9,52 mm (3/8") x4 Lunghezza massima tubazioni : 60 m Dislivello massimo tra unità interna e unità esterna : 15 m Dimensioni e peso Dimensioni unità esterna (LxAxP) : 950×840×340 mm Peso unità esterna : 73,0 Kg Garanzia di 3 anni (5 sul compressore)  La garanzia di Hisense Italia può essere attivata entro 1 mese dalla data di acquisto all’indirizzo http://www.hisenseitalia.it/clima/supporto Tecnologie unità esterna multisplit Alta efficienza compressore inverter DC Twin Rotary La progettazione del nuovo compressore BLDC Inverter a doppio rotore garantisce un miglior bilanciamento ed una riduzione delle vibrazioni. Ciò si traduce nel massimo livello di silenziosità ed in un’ottima resa in termini di ecienza e risparmio energetico. Elevata efficienza e bassa rumorosità La tecnologia Hisense Inverter Expert garantisce elevata efficienza e ridotto livello sonoro grazie all’azione combinata del compressore DC Inverter, del motore ventola DC Inverter e della valvola di espansione elettronica. Compatto e versatile  Le dimensioni delle nuove unità esterne Free Match sono state ridotte del 10% per consentirne l’installazione anche in spazi ridotti. Massimo comfort anche d'inverno In base allo storico dati, il sistema adatta le condizioni per l’attivazione dello sbrinamento per garantire il massimo comfort in modalità riscaldamento. Super riscaldamento Le nuove unità esterne Free Match garantiscono il massimo dell’efficienza anche a basse temperature, fino a-20° in riscaldamento. Tecnologia drive DC con onda sinusoidale a 180° Il sistema monitora constantemente la fredquenza del compressore e crea la forma d'onda più efficiente per determinare un effettivo risparmio dei consumi. Controllo curva Compressore con magnete al rubidio Grazie alla maggior compressione delle molecole di gas il compressore con magnete al rubidio garantisce maggior efficienza e minori assorbimenti Valvola di espansione elettronica L’unità esterna utilizza una valvola di espansione elettronica che regola e ottimizza la quantità di refrigerante di tutte le unità interne funzionanti. Funzionamento con ampio range di voltaggio L’unità esterna può funzionare con una tensione da 176V a 264V. Nei nuovi modelli l’utilizzo di una tecnica di regolazione automatica del voltaggio garantisce che il valore di protezione si regoli in base ad esso, mantenendo la frequenza di funzionamento ad un valore ottimale. Design dello scambiatore: progettato per migliorarne l’efficienza Il design dello scambiatore esterno è stato progettato per aumentare il trasferimento di calore in maniera tale da rendere più efficiente il circuito frigorifero ed evitare a creazione di blocchi di ghiaccio. Ulteriore vantaggio è quello di poter sostenere connessioni a lunga distanza tra unità esterna ed unità interne senza ridurre la capacità di raffreddamento.  Unità interna cassetta round flow Comfort a 360° Con le nuove unità a cassetta Round Flow è possibile gestire singolarmente ogni aletta tramite il comando remoto in dotazione. Grazie ai movimenti indipendenti dei defl ettori si può controllare il fl usso d’aria in base alle diverse necessità in ambiente 360° round flow Distribuzione uniforme dell'aria. Big louver L’angolo di apertura dei defl ettori può essere regolabile fino a 88° per garantire la distribuzione uniforme dell’aria Design semplice ed elegante Il pannello si contraddistingue per le sue linee semplici ed eleganti che nascondono un display che si attiva all’accensione per consentire di monitare il funzionamento in ogni momento. Struttura compatta Le nuove unità a cassetta Round Flow hanno una struttura molto compatta che misura solo 236mm Evaporatore ad alta efficienza Le unità montano il nuovo evaporatore dotato di un'ampia superficie di scambio per garantire una maggiore effi cienza senza rinunciare al risparmio energetico Smart Eye (Optional) Il sensore di presenza «Smart Eye», tramite scansione a infrarossi, individua la posizione delle persone in ambiente e regola il flusso d’aria di conseguenza. Se non viene rilevata nessuna presenza, il climatizzatore passa automaticamente in modalità risparmio energetico Molteplici possibilità di controllo Le unità a cassetta sono fornite con un pratico telecomando ma è possible controllare l’unità con un comando cablato YXEE01U(E) o tramite Wi-Fi AEH-W4GX da acquistare separatamente. Controllo Wi-Fi I climatizzatori Hisense si gestiscono comodamente dentro e fuori casa con un dispositivo mobile e una connessione Wi-Fi. HiSmart Life è la app semplice da usare e con un’interfaccia intuitiva che permette di controllare il climatizzatore ovunque ci si trovi. L’app è disponibile per iOS e Android. Dopo aver scaricato la app e associato il climatizzatore, la app consente di gestire modalità di funzionamento, temperatura, velocità di ventilazione e flusso dell’aria. Dalla sezione «Funzione intelligente» è inoltre possibile impostare i timer giornalieri o settimanali. Controllo Smart Voice La nuova app HiSmart Life è compatibile con Alexa e Google Assistant: grazie all’interazione vocale, è possibile accendere, spegnere, regolare la temperatura e impostare la modalità di funzionamento desiderata (raffrescamento o riscaldamento). Trovi HiSmart Life nelle Skill di Alexa e nel catalogo di Google assistant. Garanzia prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Technical features Indoor units Internal Unit Catalog Code: 2x ACT52UR4RCA4 Panel Code: PE-EA-B29 Power: 18000 btu/h Cooling Capacity : 5.2 kW Heating Capacity : 6.2 kW Absorption : 77 W Rated Current : 0.5A Treated Air: 13.33 m 3 /min Sound pressure level : 29~35 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 12.70 mm (1/2") Internal Unit Dimensions (WxHxD): 570x570x215 mm Indoor Unit Weight: 16 Kg Panel dimensions (WxHxD): 620x620x37 mm Optional Wi-Fi Card (Code AEH-W4E1 ) Optional Wire Control ( Code YXE-C01U ) Outdoor Unit Model: External Unit catalog code: 4AMW81U4RAA Max indoor units: up to 4 indoor units Energy efficiency: SEER : 7.01 (W/W) SCOP : 4.05 (W/W) Energy Efficiency Class (Cooling) : A++ Energy Efficiency Class (Heating) : A+ Annual energy consumption Cooling/Heating : 399/2765 kWh/a Performance: Cooling Capacity: 8 kW Heating Capacity: 9 kW Std cooling absorption: 2.25 kW Std heating absorption: 2.25 kW Sound power level : 68 dB(A) Sound pressure level : 54-60 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Pipe diameter Liquid : 6.35 mm (1/4") x4 Gas pipe diameter : 9.52 mm (3/8") x4 Guaranteed temperature range: - Cooling: -15°~48°C - Heating: -15°~24°C Dimensions: External Unit Dimensions (WxHxD): 950×840×340 mm Weight of Outdoor Unit: 73 Kg 3 year warranty (5 on the compressor) The Hisense Italia warranty can be activated within 1 month from the date of purchase at the addresshttp://www.hisenseitalia.it/clima/supporto Multisplit Outdoor Unit Technologies High Efficiency Twin Rotary DC Inverter Compressor The design of the new dual rotor BLDC Inverter compressor ensures better balancing and reduced vibrations. This translates into the maximum level of silence and excellent performance in terms of efficiency and energy saving. DC drive technology with 180° sine wave The system constantly monitors the compressor frequency and creates the most efficient waveform to determine effective consumption savings. Curve control Compressor with rubidium magnet Thanks to the greater compression of the gas molecules, the rubidium magnet compressor guarantees greater efficiency and lower absorption Electronic expansion valve The outdoor unit uses an electronic expansion valve that regulates and optimizes the refrigerant amount of all operating indoor units. Operation with wide voltage range The outdoor unit can work with voltage from 176V to 264V. In the new models, the use of an automatic voltage regulation technique ensures that the protection value adjusts according to it, keeping the operating frequency at an optimal value. Exchanger design: designed to improve its efficiency The design of the external exchanger was designed to increase the heat transfer in order to make the refrigeration circuit more efficient and avoid the creation of blocks of ice. Another advantage is that it can support long-distance connections between outdoor units and indoor units without reducing the cooling capacity. Hisense cassette New Panel New panel designed to guarantee optimal distribution of the air flow and consequently environmental comfort. The new panel features micro-holes and adjustable flaps to prevent direct airflow on people Temperature control The Hisense inverter air conditioners, using the DIP SWITCH control system, have the possibility, during winter operation, to regulate (increase it) the volume of air flow, in order to avoid stratifications and reach every point of the environment from to air condition. Air renewal Cassette units allow for air exchange in the room thanks to the external air intake. ON/OFF contact for hotel room control ON/OFF contact for fire control Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

MIDEA Dual Split Air Conditioner 4 Way Cassette R-32 9000+9000 with with M20-18FN8-Q - NEW 9+9 Internal Unit Code MCA3I-09FNXDO EAN 8033638102442 Decorative Panel Code T-MBQ-03C3 EAN 8003912218046 Single-phase PV-Hz power supply 220-240V 50Hz Cooling kW 2.64 Heating kW 2.93 Indoor unit Dimensions (LPA) mm 570-570-260 Net weight Kg 14,7 Air Flow (Min-Med-Max) m3/h 450-500-580 Sound Pressure (Min-Med-Max) dB(A) 29-33-38 Sound Power (Min-Med-Max) dB(A) 53 Decorative panel Dimensions (LPA) mm 647-647-50 Net weight Kg 2,5 Packing dimensions (LPA) mm 715-715-123 Model: o Catalog number: M2O-18FN8-Q o Gases: R-32 o Max indoor units that can be combined: 2 o Power (V/Hz/?) : 220~240/50/1 Capacity: Cooling down Nominal Capacity kW: 5.40 Absorbed power (Max): W 1790 SEER Seasonal energy efficiency: 6.3 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 300 Heating Nominal Capacity kW: 5.60 Absorbed power (Max): W 1490 SCOP Seasonal Energy Efficiency (W/W): 4.0 Energy Efficiency Class: A+ Annual energy consumption KWh/A: 1690 Performance: Outdoor Unit Air Flow: m3/h 2200 External Unit Sound Pressure Max (dB(A)): 56 Sound power (Max) dB(A): 64 Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Dimensions: Outdoor Unit (LxDxH) (mm): 800x333x555 ; 36 kgs Max. Total length/ each IU m 30/20 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 Midea Commercial R-32 The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» This change takes place years before the regulations impose the abolition of traditional refrigerants, testifying to the attention that Midea places on environmental sustainability. o Low GWP index Thanks to the low GWP index value (675), the R32 refrigerant is characterized by equivalent CO2 emissions significantly lower than those of other HFC refrigerants. o Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A o Simplicity of installation The range of new Midea indoor units can be connected, in addition to the R32 outdoor units, also to the R410A etsrene units of the previous series, to the full advantage of management simplicity 4-WAY SLIM CASSETTE Condensate Lifting Pump The Midea 4-way Cassette indoor units are equipped with a pump for lifting the condensate liquid which allows it to be discharged at a height of 600 mm above the tray. 360° Air Diffusion The 4-way cassette indoor units are equipped with pre-cuts for ducting the delivery ports and a fresh air intake, directly connected to the machine's intake duct. Remote On/Off Command and Alarm Signal Remote On/Off: with a dedicated terminal block, a switch can be easily connected to control the unit from an external device. Alarm: the card can emit an alarm signal to which it can be combined with an external signaling device. "Twin" combination The 90 x 90 cm 4-way cassette indoor units can be installed in “Twin” mode: a single commercial outdoor unit can connect to two indoor units, expanding the scenario of possible installations. Available in combinations: 18k+18k, 24k+24k, 30k+30k. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Indoor units Internal Unit Catalog Code: 2x ACT52UR4RCA4 Panel Code: PE-EA-B29 Power: 18000 btu/h Cooling Capacity : 5.2 kW Heating Capacity : 6.2 kW Absorption : 77 W Rated Current : 0.5A Treated Air: 13.33 m 3 /min Sound pressure level : 29~35 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 12.70 mm (1/2") Internal Unit Dimensions (WxHxD): 570x570x215 mm Indoor Unit Weight: 16 Kg Panel dimensions (WxHxD): 620x620x37 mm Optional Wi-Fi Card (Code AEH-W4E1 ) Optional Wire Control ( Code YXE-C01U ) Outdoor Unit Model: External Unit catalog code: 3AMW72U4RFA Max indoor units: up to 3 indoor units Energy efficiency: SEER : 6.8 (W/W) SCOP : 4.01 (W/W) Cooling Energy Efficiency Class: A++ Heating Energy Efficiency Class: A+ Annual energy consumption Cooling/Heating : 371/1920 kWh/a Performance: Cooling Capacity: 7.2 kW Heating Capacity: 7.9 kW Std cooling absorption: 1.87 kW Std heating absorption: 2.03 kW Sound power level : 68 dB(A) Sound pressure level : 49~55 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Pipe diameter Liquid : 6.35 mm (1/4") x3 Gas pipe diameter : 9.52 mm (3/8") x3 Guaranteed temperature range: - Cooling: -15°~48°C - Heating: -15°~24°C Dimensions: External Unit Dimensions (WxHxD): 860×670×310 mm Weight of Outdoor Unit: 49 Kg 3 year warranty (5 on the compressor) The Hisense Italia warranty can be activated within 1 month from the date of purchase at the addresshttp://www.hisenseitalia.it/clima/supporto Multisplit Outdoor Unit Technologies High Efficiency Twin Rotary DC Inverter Compressor The design of the new dual rotor BLDC Inverter compressor ensures better balancing and reduced vibrations. This translates into the maximum level of silence and excellent performance in terms of efficiency and energy saving. DC drive technology with 180° sine wave The system constantly monitors the compressor frequency and creates the most efficient waveform to determine effective consumption savings. Curve control Compressor with rubidium magnet Thanks to the greater compression of the gas molecules, the rubidium magnet compressor guarantees greater efficiency and lower absorption Electronic expansion valve The outdoor unit uses an electronic expansion valve that regulates and optimizes the refrigerant amount of all operating indoor units. Operation with wide voltage range The outdoor unit can work with voltage from 176V to 264V. In the new models, the use of an automatic voltage regulation technique ensures that the protection value adjusts according to it, keeping the operating frequency at an optimal value. Exchanger design: designed to improve its efficiency The design of the external exchanger was designed to increase the heat transfer in order to make the refrigeration circuit more efficient and avoid the creation of blocks of ice. Another advantage is that it can support long-distance connections between outdoor units and indoor units without reducing the cooling capacity. Hisense cassette New Panel New panel designed to guarantee optimal distribution of the air flow and consequently environmental comfort. The new panel features micro-holes and adjustable flaps to prevent direct airflow on people Temperature control The Hisense inverter air conditioners, using the DIP SWITCH control system, have the possibility, during winter operation, to regulate (increase it) the volume of air flow, in order to avoid stratifications and reach every point of the environment from to air condition. Air renewal Cassette units allow for air exchange in the room thanks to the external air intake. ON/OFF contact for hotel room control ON/OFF contact for fire control Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Indoor Units Model : Indoor unit catalog number : (x2) SLZ-M35FA Rated capacity (min-max): 3.5 (0.7-3.9) kW Air flow rate : 6.5 - 7.5 - 8.5 m 3 /h Sound pressure : 25 - 28 - 31 dB(A) Dimensions Indoor unit (HxWxD): 245 x 570 x 570 mm Indoor Unit Weight: 15 kg Wi-Fi Optional ( MAC Code-567IF-E ) Outdoor Unit: Model: Outdoor unit catalog number : MXZ-2F53VF Connectable indoor units : 2 Energy efficiency: SEER : 8.53 W SCOP : 4.1W Energy Efficiency Class (cooling) : A+++ Energy Efficiency Class (heating): A++ Performance: Nominal cooling capacity : 5.2 kW Nominal heating capacity : 6.4 kW Power absorbed in cooling: 1.358 kW Power absorbed in heating: 1.56 kW Min-max outdoor unit sound pressure: 46/51 dB-A Nominal sound power : 62 dB-A Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant gas : R-32 Guaranteed operating range: Cooling °C: -10 ~ +46 Heating °C: -15 ~ +24 Dimensions: External Unit Dimensions (HxWxD): 550 x 800 x 285 mm Weight of Outdoor Unit: 37 Kg Mitsubishi cassette SLZ-M The ideal solution for offices and commercial establishments The linear shapes of the SLZ-M units make them ideal solutions for offices and shops, ensuring a high level of environmental comfort. Modern and elegant design The 4-way cassettes of the SLZ series, designed for installation in 60x60 false ceilings, are the ideal solution for offices or commercial establishments . The use of the straight line gives the units a modern design dominated by linear shapes, making them perfectly combinable with any type of interior. Optimized energy efficiency and sound pressure reduction Great attention has been paid to seasonal energy efficiency , increased by approximately 10% compared to the previous model, reaching class A++ in cooling. Through the use of the new «3D turbo fan», the units offer significantly improved quietness compared to the previous model SLZ-KA Comfortable airflow Through the introduction of the new fan and thanks to the design of the panel and fins, it is possible to direct the air flow horizontally , directing it completely towards the ceiling and eliminating any type of draft, thus ensuring a high level of comfort Fresh air intake For an optimal air exchange in environments with difficult recirculation or for a better well-being of the occupants, the SLZ-KF(M) unit guarantees the possibility of introducing fresh air Compactness and simplified installation With a height of 245mm from the false ceiling, a feature that makes it the most compact on the market, the unit is easy to install thanks to the presence of special hooks for the temporary installation of the panel and thanks to the 850mm head of the condensate drain pump in endowment. 3D i-see sensor Thanks to the 3D i-see sensor angular accessory, it is possible to use additional functions for energy saving and room comfort . The sensor makes it possible to direct the air flow directly or indirectly towards the occupants and to reduce the power supplied in moments of less occupancy. This is achieved thanks to a complete mapping of the environment , both in terms of occupancy and temperature, for an optimal distribution of the air Mitsubishi outdoor unit MXZ-F Unparalleled versatility and enviable silence MXZ-F units are connectable to most of Mitsubishi Electric's Residential and Commercial line. The silence is even more efficient than previous models Efficiency Thanks to careful planning and the introduction of R32 refrigerant, the efficiency of the new multi-split outdoor units is significantly increased, reaching class A+++ in cooling (sizes 2F42,2F53,3F54,3F68,4F72) and A++ (sizes 2F42,2F53 ,3F54) in heating Connectivity The extraordinary connectivity available with the new external units allows to satisfy every need. The MXZ-F unit demonstrates all-round versatility , being connectable to most of the indoor unit range of the Residential and Commercial Line, whether they are wall-mounted, ceiling-mounted or ducted cassette units. Quietness The new MXZ-F multisplit outdoor units reach a new level of operating silence, reducing the sound emission by up to 4dB compared to the previous model in cooling mode and up to 3dB in heating mode. By setting this function, it is possible to automatically decrease the noise level of the external unit as the internal loads to be satisfied decrease, such as for example during night cooling Energy monitoring The new MXZ-F model supports the energy consumption monitoring function thanks to the MELCloud remote control system. Auto-correct links It is enough to press a button (MXZ-3E/F to MXZ-6D) or activate only one indoor unit (MXZ-2E/F) to ensure the correct connection between indoor and outdoor units. In the event of a connection error, the system will automatically correct it. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features INDOOR UNITS Model: Catalog number: 2 x AUX AMCA-H12/4R1 Power: 12000 btu/h Performance: Cooling Capacity (kW) : 3.5 Heating Capacity (kW) : 4.5 Dimensions HxWxD (mm): 615 x 615 x 263 OUTDOOR UNIT Model: Catalog code : AM3-H24/4DR1 Gas : R410A Max indoor units that can be combined: 2 Energy efficiency: Nominal efficiency EER (W/W): 3.36 ; COP (W/W): 3.54 Seasonal efficiency SEER (W/W) : 6.15 ; SCOP (W/W): 4.08 Energy Efficiency Class (Cool) : A++ Energy Efficiency Class (Heating) : A+ Performance: Cooling Capacity (kW) : 5.0 Heating Capacity (kW) : 5.7 Liq-Gas piping diameter (mm): 6.35/10.9 Maximum Absorbed Power: 3100W Outdoor Unit Sound Pressure (dB(A)) : 56 Dimensions and weight Outdoor Unit HxWxD (mm) : 822 x 302 x 655 General characteristics The multi AUX system has been specifically designed to create a comfortable climate. The system can include up to five indoor units of different powers and a single outdoor unit which allows you to maintain maximum comfort and a pleasant facade of the building. AUX offers a wide range of indoor units: wall mounted, ducted, cassette, floor/ceiling with a cooling power from 2.1 to 5.6 kW. The system allows you to customize the operation of each indoor unit individually, which allows you to create a comfortable microclimate in any room, regardless of other rooms. Elegant design The look of the Nexura floor standing unit is functional and elegant at the same time. Its refined design and soft lines make it easy to integrate with modern furnishings. Ultra thin The AUX cassette air conditioner can be installed in confined spaces thanks to its height of only 250mm. Spiral vents reduce energy consumption. Built-in condensate pump The condensate pump is incorporated and lifts the condensed water to a height of 1200mm above the tank, which thanks to the advanced lamination method and the use of foam insulation, will not leak anywhere. Furthermore, the indoor unit is able to operate in cooling mode down to an outdoor temperature of -5°C. Digital display The panel shows which mode the split is currently in. Characteristics Silent Model of heat exchanger with six segments Built-in condensate drain pump Digital display Independent split control Cooling at low ambient temperature Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Indoor Units Model : Indoor unit catalog number : (x2) SLZ-M25FA Nominal capacity (min-max): 2.5 (1.4-3.2) kW Air flow rate : 6.0 - 6.5 - 7.0 m 3 /h Sound pressure : 24 - 26 - 28 dB(A) Dimensions Indoor unit (HxWxD): 245 x 570 x 570 mm Indoor Unit Weight: 15 kg Wi-Fi Optional ( MAC Code-567IF-E ) Outdoor Unit: Model: Indoor unit catalog number : MXZ-2F42VF Connectable indoor units : 2 Energy efficiency: SEER/SCOP (W/W): 8.69/4.60 Energy Efficiency Class (cooling) : A+++ Energy Efficiency Class (heating): A++ Performance: Nominal cooling capacity : 4.2 kW Nominal heating capacity: 4.5 kW Power absorbed in cooling: 0.98 kW Power absorbed in heating: 0.88 kW Min-max outdoor unit sound pressure: 44/50 dB-A Nominal sound power : 59 dB-A Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant gas : R-32 Guaranteed operating range: Cooling °C: -10 ~ +46 Heating °C: -15 ~ +24 Dimensions: External unit dimensions (HxWxD): 550 x 800 x 285 mm Outdoor unit weight: 37 Kg Mitsubishi cassette SLZ-M The ideal solution for offices and commercial establishments The linear shapes of the SLZ-M units make them ideal solutions for offices and shops, ensuring a high level of environmental comfort. Modern and elegant design The 4-way cassettes of the SLZ series, designed for installation in 60x60 false ceilings, are the ideal solution for offices or commercial establishments . The use of the straight line gives the units a modern design dominated by linear shapes, making them perfectly combinable with any type of interior. Optimized energy efficiency and sound pressure reduction Great attention has been paid to seasonal energy efficiency , increased by approximately 10% compared to the previous model, reaching class A++ in cooling. Through the use of the new «3D turbo fan», the units offer significantly improved quietness compared to the previous model SLZ-KA Comfortable airflow Through the introduction of the new fan and thanks to the design of the panel and fins, it is possible to direct the air flow horizontally , directing it completely towards the ceiling and eliminating any type of draft, thus ensuring a high level of comfort Fresh air intake For an optimal air exchange in environments with difficult recirculation or for a better well-being of the occupants, the SLZ-KF(M) unit guarantees the possibility of introducing fresh air Compactness and simplified installation With a height of 245mm from the false ceiling, a feature that makes it the most compact on the market, the unit is easy to install thanks to the presence of special hooks for the temporary installation of the panel and thanks to the 850mm head of the condensate drain pump in endowment. 3D i-see sensor Thanks to the 3D i-see sensor angular accessory, it is possible to use additional functions for energy saving and room comfort . The sensor makes it possible to direct the air flow directly or indirectly towards the occupants and to reduce the power supplied in moments of less occupancy. This is achieved thanks to a complete mapping of the environment , both in terms of occupancy and temperature, for an optimal distribution of the air Mitsubishi outdoor unit MXZ-F Unparalleled versatility and enviable silence MXZ-F units are connectable to most of Mitsubishi Electric's Residential and Commercial line. The silence is even more efficient than previous models Efficiency Thanks to careful planning and the introduction of R32 refrigerant, the efficiency of the new multi-split outdoor units is significantly increased, reaching class A+++ in cooling (sizes 2F42,2F53,3F54,3F68,4F72) and A++ (sizes 2F42,2F53 ,3F54) in heating Connectivity The extraordinary connectivity available with the new external units allows to satisfy every need. The MXZ-F unit demonstrates all-round versatility , being connectable to most of the indoor unit range of the Residential and Commercial Line, whether they are wall-mounted, ceiling-mounted or ducted cassette units. Quietness The new MXZ-F multisplit outdoor units reach a new level of operating silence, reducing the sound emission by up to 4dB compared to the previous model in cooling mode and up to 3dB in heating mode. By setting this function, it is possible to automatically decrease the noise level of the external unit as the internal loads to be satisfied decrease, such as for example during night cooling Energy monitoring The new MXZ-F model supports the energy consumption monitoring function thanks to the MELCloud remote control system. Auto-correct links It is enough to press a button (MXZ-3E/F to MXZ-6D) or activate only one indoor unit (MXZ-2E/F) to ensure the correct connection between indoor and outdoor units. In the event of a connection error, the system will automatically correct it. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Indoor units Indoor unit catalog code : 2x ACT26UR4RCC8 Panel Code : PE-QEA-LD Power: 9000 btu/h Cooling capacity : 2.6 kW Heating capacity : 3.0 kW Liquid piping diameter : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal unit dimensions (WxHxD): 570x215x570 mm Panel dimensions (WxHxD): 620x40x620 mm Optional Wi-Fi : AEH-W4GX Wired remote control Optional : YXE-C01U Outdoor unit Model: Outdoor unit catalog number : 2AMW52U4RXC Number of connectable indoor units : Up to 2 indoor units Energy efficiency SEER: 7.6 SCOP : 4.4 Cooling energy efficiency class: A++ Heating energy efficiency class: A+ Annual energy consumption in cooling : 230 kWh/a Annual energy consumption in heating : 1432 kWh/a Performance Cooling capacity : 5.0 kW Heating capacity: 5.5 kW Cooling absorption: 1.24 kW Heating absorption: 1.30 kW Sound power level : 60 dB(A) Sound pressure level : 48~55 dB(A) Characteristics Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -20° ~ 24° C Installation data Liquid pipe diameter : 6.35 mm (1/4") x2 Gas pipe diameter : 9.52 mm (3/8") x2 Maximum piping length: 30 m Maximum difference in height indoor unit / outdoor unit: 15 m Dimensions and weight External unit dimensions (WxHxD): 810x580x280 mm Outdoor unit weight: 35.0 Kg 3 year warranty (5 on the compressor) The Hisense Italia warranty can be activated within 1 month from the date of purchase at the address http://www.hisenseitalia.it/clima/supporto Multisplit outdoor unit technologies High Efficiency Twin Rotary DC Inverter Compressor The design of the new dual rotor BLDC Inverter compressor ensures better balancing and reduced vibrations. This translates into the maximum level of silence and excellent performance in terms of efficiency and energy saving. DC drive technology with 180° sine wave The system constantly monitors the compressor frequency and creates the most efficient waveform to determine effective consumption savings. Curve control Compressor with rubidium magnet Thanks to the greater compression of the gas molecules, the rubidium magnet compressor guarantees greater efficiency and lower absorption Ecological refrigerant R-32 R32 has zero ozone depletion potential (OPD) and lower global warming potential (GWP), which contributes to the prevention of global warming Electronic expansion valve The outdoor unit uses an electronic expansion valve that regulates and optimizes the refrigerant amount of all operating indoor units. Operation with wide voltage range The outdoor unit can work with voltage from 176V to 264V. In the new models, the use of an automatic voltage regulation technique ensures that the protection value adjusts according to it, keeping the operating frequency at an optimal value. Exchanger design: designed to improve its efficiency The design of the external exchanger was designed to increase the heat transfer in order to make the refrigeration circuit more efficient and avoid the creation of blocks of ice. Another advantage is that it can support long-distance connections between outdoor units and indoor units without reducing the cooling capacity. New Hisense round flow cassette Comfort at 360° With the new Round Flow cassette units it is possible to manage each fin individually via the supplied remote control. Thanks to the independent movements of the deflectors, the air fl ow can be controlled according to the different needs in the room 360° round flow Uniform air distribution. Big louver The opening angle of the deflectors can be adjusted up to 88° to ensure uniform air distribution Simple and elegant design The panel is characterized by its simple and elegant lines that hide a display that activates when switched on to allow you to monitor the operation at any time. Compact structure The new Round Flow cassette units have a very compact structure measuring only 236mm High-efficiency evaporator The units feature the new evaporator featuring a large exchange surface to ensure greater efficiency without sacrificing energy savings Smart Eye (Optional) The «Smart Eye» presence sensor identifies the position of people in the room via infrared scanning and adjusts the air flow accordingly. If no presence is detected, the air conditioner automatically switches to energy saving mode Multiple control possibilities The cassette units are supplied with a handy remote control but it is possible to control the unit with a YXEE01U(E) wired controller or via AEH-W4GX Wi-Fi to be purchased separately. Smart Wi-Fi Control Hisense air conditioners are managed comfortably inside and outside the home with a mobile device and a Wi-Fi connection. ConnectLife is the easy-to-use app with an intuitive interface that allows you to control the air conditioner wherever you are. The app is available for iOS and Android. Operation in Wi-Fi mode requires cards to be installed on each indoor unit. After downloading the app and pairing the air conditioner, the app allows you to manage operating modes, temperature, fan speed and air flow. From the «Automation» section it is also possible to set daily or weekly timers Smart Voice Control The new ConnectLife app is compatible with Alexa and Google assistant, thanks to voice interaction, it is possible to turn on, turn off, adjust the temperature and set the operating mode (cooling or heating). Find ConnectLife in the Alexa Skills and in the Google assistant catalog Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Indoor Units 1) Model : Indoor unit catalog number : (x1) SLZ-M25FA Nominal capacity (min-max): 2.5 (1.4-3.2) kW Air flow rate : 6.0 - 6.5 - 7.0 m 3 /h Sound pressure : 24 - 26 - 28 dB(A) Dimensions Indoor unit (HxWxD): 245 x 570 x 570 mm Indoor Unit Weight: 15 kg Wi-Fi Optional ( MAC Code-567IF-E ) 2) Model : Indoor unit catalog number : (x1) SLZ-M35FA Rated capacity (min-max): 3.5 (0.7-3.9) kW Air flow rate : 6.5 - 7.5 - 8.5 m 3 /h Sound pressure : 25 - 28 - 31 dB(A) Dimensions Indoor unit (HxWxD): 245 x 570 x 570 mm Indoor Unit Weight: 15 kg Wi-Fi Optional ( MAC Code-567IF-E ) Outdoor Unit: Model: Outdoor unit catalog number : MXZ-2F53VF Connectable indoor units : 2 Energy efficiency: SEER : 8.53 W SCOP : 4.1W Energy Efficiency Class (cooling) : A+++ Energy Efficiency Class (heating): A++ Performance: Nominal cooling capacity : 5.2 kW Nominal heating capacity : 6.4 kW Power absorbed in cooling: 1.358 kW Power absorbed in heating: 1.56 kW Min-max outdoor unit sound pressure: 46/51 dB-A Nominal sound power : 62 dB-A Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant gas : R-32 Guaranteed operating range: Cooling °C: -10 ~ +46 Heating °C: -15 ~ +24 Dimensions: External Unit Dimensions (HxWxD): 550 x 800 x 285 mm Weight of Outdoor Unit: 37 Kg Mitsubishi cassette SLZ-M The ideal solution for offices and commercial establishments The linear shapes of the SLZ-M units make them ideal solutions for offices and shops, ensuring a high level of environmental comfort. Modern and elegant design The 4-way cassettes of the SLZ series, designed for installation in 60x60 false ceilings, are the ideal solution for offices or commercial establishments . The use of the straight line gives the units a modern design dominated by linear shapes, making them perfectly combinable with any type of interior. Optimized energy efficiency and sound pressure reduction Great attention has been paid to seasonal energy efficiency , increased by approximately 10% compared to the previous model, reaching class A++ in cooling. Through the use of the new «3D turbo fan», the units offer significantly improved quietness compared to the previous model SLZ-KA Comfortable airflow Through the introduction of the new fan and thanks to the design of the panel and fins, it is possible to direct the air flow horizontally , directing it completely towards the ceiling and eliminating any type of draft, thus ensuring a high level of comfort Fresh air intake For an optimal air exchange in environments with difficult recirculation or for a better well-being of the occupants, the SLZ-KF(M) unit guarantees the possibility of introducing fresh air Compactness and simplified installation With a height of 245mm from the false ceiling, a feature that makes it the most compact on the market, the unit is easy to install thanks to the presence of special hooks for the temporary installation of the panel and thanks to the 850mm head of the condensate drain pump in endowment. 3D i-see sensor Thanks to the 3D i-see sensor angular accessory, it is possible to use additional functions for energy saving and room comfort . The sensor makes it possible to direct the air flow directly or indirectly towards the occupants and to reduce the power supplied in moments of less occupancy. This is achieved thanks to a complete mapping of the environment , both in terms of occupancy and temperature, for an optimal distribution of the air Mitsubishi outdoor unit MXZ-F Unparalleled versatility and enviable silence MXZ-F units are connectable to most of Mitsubishi Electric's Residential and Commercial line. The silence is even more efficient than previous models Efficiency Thanks to careful planning and the introduction of R32 refrigerant, the efficiency of the new multi-split outdoor units is significantly increased, reaching class A+++ in cooling (sizes 2F42,2F53,3F54,3F68,4F72) and A++ (sizes 2F42,2F53 ,3F54) in heating Connectivity The extraordinary connectivity available with the new external units allows to satisfy every need. The MXZ-F unit demonstrates all-round versatility , being connectable to most of the indoor unit range of the Residential and Commercial Line, whether they are wall-mounted, ceiling-mounted or ducted cassette units. Quietness The new MXZ-F multisplit outdoor units reach a new level of operating silence, reducing the sound emission by up to 4dB compared to the previous model in cooling mode and up to 3dB in heating mode. By setting this function, it is possible to automatically decrease the noise level of the external unit as the internal loads to be satisfied decrease, such as for example during night cooling Energy monitoring The new MXZ-F model supports the energy consumption monitoring function thanks to the MELCloud remote control system. Auto-correct links It is enough to press a button (MXZ-3E/F to MXZ-6D) or activate only one indoor unit (MXZ-2E/F) to ensure the correct connection between indoor and outdoor units. In the event of a connection error, the system will automatically correct it. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Indoor units Indoor unit catalog code : 2x ACT35UR4RCC8 Panel Code: PE-QEA-LD Power: 12000 btu/h Cooling capacity : 3.5 kW Heating capacity : 4.0 kW Liquid piping diameter : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal unit dimensions (WxHxD): 570x215x570 mm Panel dimensions (WxHxD): 620x40x620 mm Optional Wi-Fi : AEH-W4GX Wired remote control Optional : YXE-C01U Outdoor unit Model: Outdoor unit catalog number : 2AMW52U4RXC Number of connectable indoor units : Up to 2 indoor units Energy efficiency SEER: 7.6 SCOP : 4.4 Cooling energy efficiency class: A++ Heating energy efficiency class: A+ Annual energy consumption in cooling : 230 kWh/a Annual energy consumption in heating : 1432 kWh/a Performance Cooling capacity : 5.0 kW Heating capacity: 5.5 kW Cooling absorption: 1.24 kW Heating absorption: 1.30 kW Sound power level : 60 dB(A) Sound pressure level : 48~55 dB(A) Characteristics Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -20° ~ 24° C Installation data Liquid pipe diameter : 6.35 mm (1/4") x2 Gas pipe diameter : 9.52 mm (3/8") x2 Maximum piping length: 30 m Maximum difference in height indoor unit / outdoor unit: 15 m Dimensions and weight External unit dimensions (WxHxD): 810x580x280 mm Outdoor unit weight: 35.0 Kg 3 year warranty (5 on the compressor) The Hisense Italia warranty can be activated within 1 month from the date of purchase at the address http://www.hisenseitalia.it/clima/supporto Multisplit outdoor unit technologies High Efficiency Twin Rotary DC Inverter Compressor The design of the new dual rotor BLDC Inverter compressor ensures better balancing and reduced vibrations. This translates into the maximum level of silence and excellent performance in terms of efficiency and energy saving. DC drive technology with 180° sine wave The system constantly monitors the compressor frequency and creates the most efficient waveform to determine effective consumption savings. Curve control Compressor with rubidium magnet Thanks to the greater compression of the gas molecules, the rubidium magnet compressor guarantees greater efficiency and lower absorption Ecological refrigerant R-32 R32 has zero ozone depletion potential (OPD) and lower global warming potential (GWP), which contributes to the prevention of global warming Electronic expansion valve The outdoor unit uses an electronic expansion valve that regulates and optimizes the refrigerant amount of all operating indoor units. Operation with wide voltage range The outdoor unit can work with voltage from 176V to 264V. In the new models, the use of an automatic voltage regulation technique ensures that the protection value adjusts according to it, keeping the operating frequency at an optimal value. Exchanger design: designed to improve its efficiency The design of the external exchanger was designed to increase the heat transfer in order to make the refrigeration circuit more efficient and avoid the creation of blocks of ice. Another advantage is that it can support long-distance connections between outdoor units and indoor units without reducing the cooling capacity. New Hisense round flow cassette Comfort at 360° With the new Round Flow cassette units it is possible to manage each fin individually via the supplied remote control. Thanks to the independent movements of the deflectors, the air fl ow can be controlled according to the different needs in the room 360° round flow Uniform air distribution. Big louver The opening angle of the deflectors can be adjusted up to 88° to ensure uniform air distribution Simple and elegant design The panel is characterized by its simple and elegant lines that hide a display that activates when switched on to allow you to monitor the operation at any time. Compact structure The new Round Flow cassette units have a very compact structure measuring only 236mm High-efficiency evaporator The units feature the new evaporator featuring a large exchange surface to ensure greater efficiency without sacrificing energy savings Smart Eye (Optional) The «Smart Eye» presence sensor identifies the position of people in the room via infrared scanning and adjusts the air flow accordingly. If no presence is detected, the air conditioner automatically switches to energy saving mode Multiple control possibilities The cassette units are supplied with a handy remote control but it is possible to control the unit with a YXEE01U(E) wired controller or via AEH-W4GX Wi-Fi to be purchased separately. Smart Wi-Fi Control Hisense air conditioners are managed comfortably inside and outside the home with a mobile device and a Wi-Fi connection. ConnectLife is the easy-to-use app with an intuitive interface that allows you to control the air conditioner wherever you are. The app is available for iOS and Android. Operation in Wi-Fi mode requires cards to be installed on each indoor unit. After downloading the app and pairing the air conditioner, the app allows you to manage operating modes, temperature, fan speed and air flow. From the «Automation» section it is also possible to set daily or weekly timers Smart Voice Control The new ConnectLife app is compatible with Alexa and Google assistant, thanks to voice interaction, it is possible to turn on, turn off, adjust the temperature and set the operating mode (cooling or heating). Find ConnectLife in the Alexa Skills and in the Google assistant catalog Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less