NB: in the absence of the ciao at, the NEW CIAO AT 25 LN LOW NOX model will be sent BERETTA CIAO AT 25 CSI CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP Product code: 20113788 Characteristics: Energy efficiency in heating: B Energy efficiency Sanitary: A Sanitary load profile: XL Nominal heat input: 25 kW Electric Power: 129W Supply voltage/frequency: 230/50 Volt/Hz Electrical protection degree: X5D ip Dimensions HxWxD: 780 x 400 x 338 ; 40 Kg Gas version available: METHANE Warm-up exercise: Maximum pressure and temperatures: 3/90 bar/°C Heating temperature selection range: 40/80 °C Pump: pump head available for the system: 266 m/bar Expansion tank capacity: 8 l Healthcare exercise: Maximum pressure: 6 bars Minimum pressure: 0.15 bar Quantity of hot water with ∆t=25°C: 14.3 l/min Minimum domestic water flow rate: 2 l/min DHW temperature selection range: 37 - 60 °C Beretta HELLO AT Hi AT, ideal for replacement in systems with radiators. Ciao AT is the innovative condensing boiler specifically designed by Beretta for traditional high temperature systems (radiators and radiators). The boiler is equipped with a heat recovery unit on the fumes and combustion in a sealed chamber; this allows to obtain very high performance in terms of efficiency and therefore a significant energy saving. High performance and low consumption In the Ciao AT boiler, the water in the primary circuit passes through an additional exchanger, which allows you to recover energy that would otherwise be wasted. This process makes it possible to recover latent heat and therefore to further increase the performance of the boiler. The energy saving offered by a boiler is greater the higher its efficiency: Ciao AT therefore allows you to reduce gas consumption compared to a boiler without an additional exchanger. Management: The electronic panel is the interface for managing the boiler. Simple and intuitive, it allows you to adjust the boiler parameters and activate the numerous functions. The liquid crystal display provides information on the status of the device and the diagnostic codes. By turning the knobs, the heating water and domestic hot water temperature can be set easily and intuitively. The panel integrates the Sistema Clima Amico function. The Ciao AT technology makes use of the condensing exchanger which recovers the latent heat of the fumes, the same principle used by condensing boilers. The exchanger, located at the top left, is connected directly to the fan which pushes the fumes inside it, before they are definitively expelled. The difference in the temperature of the fumes between the ~140°C inlet and the ~65°C outlet of the condensing exchanger is indicative of the amount of heat recovered from them. The return from the system first passes through the condensing exchanger which recovers the heat from the fumes, and then passes through the primary exchanger, where it receives the remaining heat in order to reach the required flow temperature. The water then recovers part of the heat from the fumes, which would otherwise be expelled into the atmosphere, thus giving rise to less waste and consequently greater savings for the user. Outdoor installation: Ciao AT is designed to also be installed outdoors in partially protected places thanks to the dedicated accessories (bottom cover kit and top cover kit) and board anti-freeze protection down to 0 °C. In colder temperatures it is possible to extend the protection down to -10 °C using the special antifreeze heater kit with which the lower cover is required. Up to 17 meters of Ø 60 ducting with the Ciao AT boiler: With Ciao AT it is possible to comfortably duct even the most "difficult" flues thanks to the approval for Ø 60mm flue systems which is added to the traditional Ø 80 mm ducting flue system. The main 60mm flue ducts are available in the Beretta price list catalogue, while the boiler manuals provide indications of the maximum length, which differ according to the boiler power. TECHNICAL FEATURES: Specific for systems with radiators and radiators (at high temperature) Condensing post exchanger in aluminum alloy Possibility of outdoor installation with antifreeze heater kit (optional) IPX5D electrical protection degree Environmental Self-Regulation System (SARA) Low consumption circulator 6 m (EEI≤0.20) Hydraulic connections cover (optional) Condensate collection neutralizer drawer kit (optional) Template, hydraulic fittings, gas and sanitary taps (optional) For gas conversion, contact authorized Beretta Technical Assistance Centres Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

RIELLO RESIDENCE CONDENS 25 KIS LPG CONDENSING BOILER COMPLETE WITH FUME KIT - NEW ErP  Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Heating/DHW operating characteristics Nominal heat output (heating): 19.5 kW Nominal heat input kW: 25 kW Energy efficiency (92/42/EEC) **** Profit return 30% (47th return): 108% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 15.1 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxwxd) mm 740x420x275; 35 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: LPG (BY DISPLAY SETTING) RESIDENCE CONDENS RIELLO PRESENTS RESIDENCE THE NEW RANGE OF CONDENSING BOILERS NEW EXCHANGER Wrapped stainless steel primary exchanger. Efficiency and reliability in the heart of the Residence. DOMESTIC COMFORT FUNCTION Domestic water pre-heating with Touch&Go function for activation upon request directly from the drawing tap. ACTIVE COMBUSTION CONTROL Advanced electronic combustion control system which constantly monitors combustion to obtain constantly optimized consumption and emissions. DIGITAL USER INTERFACE Simple and intuitive backlit LCD display. Ease of setting thanks to the silk-screened keys dedicated to the individual user functions. MODULATING CIRCULATOR High efficiency circulator with flow rate modulation and regulation logic that can be set between different modes according to the type of system. HIGH EFFICIENCY The high efficiency of the primary exchanger, the modulating circulator and the continuous control of the combustion parameters guarantee very low consumption even after years of operation. QUICK INSTALLATION Speed ​​and ease of installation thanks to the compact dimensions, accessibility of the components and external electrical connections. UNIQUE VERSION METHANE - LPG Dedicated codes are no longer necessary in the case of LPG because Residence is able to automatically adapt its operation to the type of fuel with rapid setting from the display. FLEXIBLE INSTALLATION The characteristics of Residence and its compact dimensions make it the ideal solution for both indoor and recessed installation (model 25 KIS only) or outdoors in a partially protected place. RESIDENCE, HEART OF STEEL The new RESIDENCE exchanger is made of stainless steel, with a smooth tube with a large section to guarantee the best efficiency and cleanliness over time. NEW PRIMARY EXCHANGER IN STAINLESS STEEL The geometry with a single wrapped coil (hydraulic circuit in series) guarantees constant flow in all sections of the exchanger and intrinsically prevents clogging phenomena. Front access facilitates periodic maintenance and cleaning of the combustion chamber. SELF-ADAPTING ELECTRONIC COMBUSTION CONTROL The new Residence is equipped with the intelligent ACC combustion control system, which guarantees that the process always takes place in an optimal manner in any condition, thanks to the modulating gas valve and the ionization electrode. Thanks to the ACC, Residence is able to automatically adapt to the fuel (methane or LPG) without resorting to specific codes or accessory conversion kits. Residence also reacts to the variation of the fuel title and to the pressure drops on the flue gas side. The ACC system detects the excess air value and intervenes by modulating the mixture. The ACC system also simplifies installation. During ignition, it does not require calibration and it is sufficient to select the type of combustible gas used by the boiler via the interface, if different from the default one (methane). Since the system keeps the value of the CO2 produced constant, even the smoke control during the ignition phase is no longer necessary for the correct functioning of the product. Controlling combustion also means guaranteeing constant emissions, which are always well below the limits set by the law. In fact, if the process takes place in an optimal manner, the gases produced will also have the best theoretical composition with respect to the other conditions. MANY NEEDS, ONE SOLUTION RESIDENCE IS ALWAYS THE IDEAL CHOICE THANKS TO THE TECHNICAL SOLUTIONS AND THE COMPACT DIMENSIONS, IT CAN BE USED IN ANY INSTALLATION SITUATION INTERIOR Inside the home, thanks to an elegant aesthetic that allows it to be inserted pleasantly into any environment. OUTDOOR Outdoors in a partially protected place, thanks to the IPX5D degree of protection and the accessory antifreeze heater kit RECESSED Inside a built-in box thanks to its compact dimensions (model 25 KIS only). NEW DIGITAL CONTROL Setting your own comfort for domestic hot water and heating is immediate thanks to the buttons with symbols dedicated to the individual functions Domestic hot water temperature setting Operating status 0FF - SUMMER - WINTER Unlock and restore alarms Information and parameters menu Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

SAVIO actaDENS 25 S condensing boiler complete with low NOx LPG fume exhaust kit - News Code 10302.2043.0 Acta Dens model Performance DHW nominal heat input kW (kcal/h) 26.0 (22356) Nominal heat input * heating kW (kcal/h) ) 21.0 (18057) Maximum useful power in heating 60/80° kW (kcal/h) 20.5 (17627) Useful power in DHW 60/80° kW (kcal/h) 25.4 (21840) Efficiency at 100% load (50/30 °C) % 106.8 Sanitary flow rate ∆t =25°K l/min 14.7 8 liter expansion vessel NOx class 6 LPG supply Dimensions Dimensions HxWxD mm 703x400x325 actaDENS Acta Dens completes the Savio range with premixed condensing: perfect for radiator systems and suitable for radiant systems with mixing groups. ActaDens is the compact condensing boiler that ensures high yields, low consumption and respect for the environment. Available for heating and domestic hot water production, in power ratings of 25 and 30 kW. Main features Primary condensing exchanger in stainless steel with steel lining to offer maximum resistance to corrosion Total premix burner, stainless steel (Nox class 6) Modulation 1:5 CNG and also LPG Sanitary plate heat exchanger in stainless steel 8 liter expansion vessel High efficiency pump with low energy consumption Can be installed in a partially protected place Integration with SAVIO solar systems, using a solar kit Analog pressure reading Arrangement for remote control and external probe High circulation single coil primary heat exchanger Savio introduces the new stainless steel heat exchanger for condensing boilers to the market: Round. Round is a compact monothermal heat exchanger based on a stainless steel coil with an oval section. The heat exchanger consists of a combustion chamber, condensing area and an insulated metal disc protected with silicone ceramic fiber which separates the two areas. Using a single stainless steel strip to produce the coil, including inlet / outlet connections, the following advantages are obtained: The accumulation of dirt and debris is avoided The water flow is uniformly distributed and guarantees a homogeneous heat exchange Reduction of pressure drops with optimized circuit. The ease of cleaning and the robustness of this exchanger are one of the main strengths of the product since it can be used on new systems but also on old systems in the event of renovations. Round integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the single coil. The absence of circuits in parallel guarantees an easy "washing" operation of the exchanger and the elimination of any air present in the system circuit. Control panel: Summer/winter/off selector Heating temperature regulator DHW temperature regulator Analog pressure reading DHW and heating temperature visualization from the display Display of fault diagnostics, block status and fault history The display operates in the following modes: INFO – information available on the operating status and error history FREE programming – programmable parameters for generator/system adjustment and User SET INSTALLER programming - generator parameters ASSISTANCE programming - Authorized Assistance Center parameters Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

optional box Savio Edilia HE 25 built-in methane condensing boiler complete with low NOx flue exhaust kit Cassone Optional Model: Edilia HE Natural gas product code 10312.1032.1 Energy class A ErP specifications Heating/DHW nominal heat input 21.0 / 26.0 kW Heating/DHW maximum useful power 60°/80°C * 20.3 / 25.1 kW Energy Efficiency ★★★★ NOx class 6 Minimum/maximum heating pressure bar 0.3 / 3.0 Minimum/maximum DHW pressure bar 0.3 / 10.0 Degree of protection n° IPX5D Height x Width x Depth mm 1200x600x240 EDILIA Edilia HE is the new Savio range of built-in condensing boilers . Excellent performance and high yields that last over time thanks to the innovative heat exchanger. Ease of use thanks to the digital control panel with display designed to communicate with the user easily and comfortably. Available in versions for heating and domestic hot water production Edilia HE presents a complete range of powers, 20 and 35 kW combi models in the same extremely compact dimensions: 1200 x 600 x 240 mm. Both versions of Edilia HE are in class A , therefore they benefit from the tax deduction according to current legislation. Main features High yields (★★★★ compliant with yield directive 92/42 EEC and Legislative Decree 311/06) Sanitary comfort (★★★ EN 13203) Primary condensing exchanger in stainless steel with steel lining to offer maximum resistance to corrosion Total premix burner, built in stainless steel (Class NOx 6) Modulation 1:5 CNG and also LPG Sanitary plate heat exchanger in stainless steel 7 l expansion vessel for mod. 25S and 10 l for mod. 35S High efficiency pump with low energy consumption Maximum power adjustable according to the system Degree of protection IPX5D Recessed installation in the wall Integration with Savio solar systems, using a solar kit Digital control panel with backlit display Analog reading of the pressure on the machine, digital on the remote Arrangement for remote control (optional) and external probe as standard High circulation single coil primary heat exchanger Savio introduces the new stainless steel heat exchanger for condensing boilers to the market: Round . Round is a compact monothermal heat exchanger based on a stainless steel coil with an oval section. The heat exchanger consists of a combustion chamber, condensing area and an insulated metal disc protected with silicone ceramic fiber which separates the two areas. By using a single stainless steel strip to produce the coil, including inlet/outlet fittings, the following benefits are achieved: Accumulation of dirt and debris is avoided The water flow is uniformly distributed and guarantees a homogeneous heat exchange The water flow is constant for a longer life of the product Reduction of pressure drops with optimized circuit The ease of cleaning and the sturdiness of this exchanger are one of the main strengths of the product since it can be used on new systems but also on old systems in the event of renovations . Round integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the single coil. The absence of circuits in parallel guarantees an easy "washing" operation of the exchanger and the elimination of any air present in the system circuit. Thermoregulation By connecting the external probe (standard) and the remote control (optional) directly to the boiler, climatic regulation can be used. Edilia HE will adapt the system water temperature to the external climatic conditions, ensuring that the desired room temperature is reached without waste and optimizing consumption . By using the climatic regulation, the regulation efficiency is also raised, giving greater value to your home . Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Riello START AR 25 Kis LOW NOx condensing boiler cod. 20171062 complete with CNG exhaust kit - NEW Seasonal space heating efficiency class B Water heating energy efficiency class A HEATING Nominal heat input (Hi) kW 25.00 Nominal thermal power (80÷60 °C) kW 23.95 SANITARY Nominal heat input (Hi) kW 25.00 Nominal thermal power (*) kW 25.00 CHARACTERISTICS Nox class - UNI EN 483 6 Quantity of hot water at ∆t 25°C l/min 14.3 Dimensions HxWxD mm 715x405x250 START AR 25 The new START AR is the condensing boiler specifically designed to operate with high temperatures and therefore with radiator systems. Still improved in performance, it is available in a power of 25 kW with reduced NOx emissions <56 mg/kWh. New digital interface Even more compact dimensions also for built-in Innovative gas-air combustion system Hydraulic connections with DIN sequence Cooled burner Low consumption circulator (IEE≤0.20) Climatic regulation managed directly by the boiler control unit Mounting crossbar, power supply cable supplied Hydraulic connections available as an accessory IPX5D electrical protection degree NEW DIGITAL INTERFACE START AR is equipped with a modern backlit display which allows immediate and complete reading of the information, also through the language of icons. Six intuitive keys allow you to easily make adjustments and access parameter configuration. INNOVATIVE POST-EXCHANGER Stainless steel finned pack heat recovery unit, in thermoplastic container, ideal for high temperature systems. Preheating function of the primary circuit, using the residual heat of the exhaust fumes and of the low NOx cooled burner. Reduced need for cleaning. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : EXCLUSIVE X 25C CNG item code: 20187794 Nominal Power : 20 kW Heating efficiency class: A Sanitary Efficiency Class: A Seasonal Heating Energy Efficiency : 93% Seasonal ACS Energy Efficiency : 86% Auxiliary Electricity Consumption In Standby mode: 3 W At partial load : 13 W Full Load: 27W Technical specifications Heating thermal capacity: 3.6 ~ 20 kW DHW heat output : 3.6 ~ 25 kW Nominal thermal power (80°/60°) : 19.5 kW Nominal thermal power (50°/30°) : 21.32 kW Power supply (V,Hz, Ø) : 220~240/50/1 NOx class : 6 Degree of protection : IP X5D Declared load profile : XL Heating Maximum pressure : 3 bars Temperature : 90°C Membrane expansion tank : 9 l Sanitary Maximum pressure : 8 bars DHW production : 10.8 ~ 15.1 l/min Minimum DHW flow rate : 2 l/min Installation data Heating Inlet-Outlet / Gas Inlet Pipe Diameter: 19.05 mm (3/4") DHW outlet diameter / Boiler flow-return: 12.70 mm (1/2") Maximum length for coaxial outlet (Ø 60-100 mm): 10 m Maximum length for split outlet (Ø 80+80 mm): 60 + 60 m Dimensions and weight Boiler dimensions (HxPxL): 740x275x420 mm Boiler weight: 35 Kg Condensing boiler Beretta Excusive X Technology for a green lifestyle From the R&D laboratories of Beretta comes EXCLUSIVE X , the new condensing boiler that marks a further step in the evolution of the EXCLUSIVE range , whose name has always characterized the top of the brand's wall-mounted offer Combustion and electronics, which represent the heart and brain of the boiler, have been completely redesigned to offer an even more performing product that meets European environmental sustainability objectives EXCLUSIVE X is the ideal choice for those who are not satisfied and are looking for green solutions Exclusive Innovation The new stainless steel exchanger , the innovative electronics with hybrid function integrated in the boiler , without external remote controls, and the ability to process mixtures of natural gas and hydrogen up to 20% give EXCLUSIVE X a highly technological profile, ensuring maximum energy saving, which translates into an economic advantage for the user Exclusive Performances EXCLUSIVE X represents the spearhead of the Beretta offer. Thanks to the new optimized plate exchanger, the range achieves sanitary performance at the top of the category in terms of efficiency, temperature stability and waiting times. The refined ACC electronic combustion system, which allows for continuous modulation of the quantity of fuel delivered, offers "first-class" efficiency and functionality in all circumstances, reducing harmful emissions to a minimum. Exclusive Beretta The new range represents the synthesis of Beretta's advanced research, in continuity of style with the best tradition of the brand . Continuity that manifests itself both in the aesthetics of the product, which takes up the lines of the first Beretta boiler models, reinterpreting them in a modern key, and in the simplicity of use and installation flexibility , among the distinctive features of the brand, which have always been appreciated by the market Technology for Maximum Efficiency A New Heart of Steel EXCLUSIVE X is equipped with a new primary exchanger in stainless steel, with a smooth tube with a large section , to ensure the best efficiency and cleanliness over time. In addition to the high resistance to the corrosive action of acid condensate , stainless steel prevents the internal formation of oxides and other electrochemical phenomena typical of installation on old systems. The single wrapped coil geometry (hydraulic circuit in series) guarantees constant flow in all sections of the exchanger and intrinsically prevents clogging phenomena. The front access facilitates periodic maintenance and cleaning of the combustion chamber Electronic Injection Combustion ACC Combustion The ACC system, refined by Beretta for the EXCLUSIVE X, allows in all circumstances to offer functionality, efficiency and low emissions that are "first in class". Using a sensor for detecting the flame ionisation current, which allows the electronics to continuously modulate the quantity of fuel injected, the system keeps the air/gas mixture constant at optimal values ​​over the entire modulation range of the delivered power (value of constant CO2 ). Thanks to the sophisticated ACC system, combustion adjusts itself, thus eliminating the need for any calibration and allowing the boiler to operate with different gas compositions. Particular attention is paid to CO emissions, through a self-diagnosis that intervenes on the burner before the emission threshold allowed by the legislation is exceeded Advantages of the ACC System Self-adaptation of the system to the type and composition of the gas. Gas conversion kits no longer needed. No Mechanical Calibration or manual interventions on combustion to be carried out on the boiler Maintaining the stoichiometric ratio Constant Air-Gas ratio under any circumstances Continuous Control of Emissions in compliance with operating limits Gas savings maximized compared to traditional systems. Thanks to the constant maintenance of the efficiency at the modulation of the power Self-learning Optimized efficiency and reliability over time, thanks to self-learning with compensation by the ACC system Innovative air filter that prevents the entry of impurities from the air drawn into the burner and exchanger, which can compromise the efficiency of the boiler, also facilitating maintenance. The filter also helps to reduce the noise emissions of the boiler in operation Lower connection cover available as an option for the 25 C and 25 R models, to improve the aesthetic impact and facilitate the integration of filters and accessories New color system display EXCLUSIVE X is equipped with a new advanced interface, which constitutes the intelligence of the boiler's hybrid system . In fact, the new range was born HYBRID READY, i.e. with the possibility of directly managing multi-energy systems, through the boiler interface, without external remote controls. Elegantly covered by a flap with the Beretta logo, the new interface features a backlit color LCD display which communicates with users and/or installers using texts and icons. Using 4 keys it is possible to navigate the display in a simple and intuitive way , accessing all the settings and parameterizations of the boiler and the system. The advanced self-diagnostics , together with the EXCLUSIVE X functions that can be activated from the interface, complete its innovative profile Hourly Programming Programmable heating by hour and by single zone Intelligent System Filling Activation of filling in autonomy and total safety System pressure Displayed Now also display as a screensaver Preheating Domestic hot water preheating activation Scheduled Maintenance Intelligent system that warns the user when boiler maintenance is scheduled The Efficient choice of Hybrid Ready Energies The range was created as a fundamental element of the offer of HYBRID READY products, which make up the hybrid technology system conceived and developed in the Beretta Research Laboratories . This system, created to meet the current and future needs of integration and governance of the various energy sources (Gas/Electricity/Renewables), also includes the most innovative methods of energy accumulation and distribution. EXCLUSIVE X was born with the system intelligence integrated in the boiler , REC 10CH, a real thinking brain that constantly governs and controls the hybrid system created, to always offer the best comfort in an efficient and effective way. The Beretta Hybrid, standing out for its modular approach to the world of multi-energies, is able to evolve over time, with the introduction of new components that increase its overall efficiency Exclusive X See the Future EXCLUSIVE X was born today, designed for the generations of tomorrow. The new range is already set up to operate with mixtures of natural gas and hydrogen - up to a maximum of 20% - in line with the objectives of environmental sustainability and the decarbonisation process launched by the European Union Hydrogen is the sustainable energy source of the future Availability in huge quantities Producibility using low-impact methods and in a sustainable way from renewable sources, such as wind energy, photovoltaics and biomass Reduction of polluting emissions in the percentage relative to its use Real opportunity for change to start the decarbonization process, fight global climate change, improve air and life quality Use cycle of hydrogen Hydrogen is a safe and clean gas, present and available in enormous quantities even in nature. Mixed with natural gas up to a maximum ratio of 20 to 80%, hydrogen makes it possible to generate heat and domestic hot water , helping to minimize polluting emissions. From the combustion of oxygen and hydrogen, and in the quantity of the latter used, water vapor is generated: hydrogen is returned to its most common source of origin, water, and reintroduced into nature Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

optional box Savio Edilia HE 25 built-in LPG condensing boiler complete with low NOx flue exhaust kit Cassone Optional Model: Edilia HE LPG product code 10302.1024.1 Energy class A ErP specifications Heating/DHW nominal heat input 21.0 / 26.0 kW Heating/DHW maximum useful power 60°/80°C * 20.3 / 25.1 kW Energy Efficiency ★★★★ NOx class 6 Minimum/maximum heating pressure bar 0.3 / 3.0 Minimum/maximum DHW pressure bar 0.3 / 10.0 Degree of protection n° IPX5D Height x Width x Depth mm 1200x600x240 EDILIA Edilia HE is the new Savio range of built-in condensing boilers . Excellent performance and high yields that last over time thanks to the innovative heat exchanger. Ease of use thanks to the digital control panel with display designed to communicate with the user easily and comfortably. Available in versions for heating and domestic hot water production Edilia HE presents a complete range of powers, 20 and 35 kW combi models in the same extremely compact dimensions: 1200 x 600 x 240 mm. Both versions of Edilia HE are in class A , therefore they benefit from the tax deduction according to current legislation. Main features High yields (★★★★ compliant with yield directive 92/42 EEC and Legislative Decree 311/06) Sanitary comfort (★★★ EN 13203) Primary condensing exchanger in stainless steel with steel lining to offer maximum resistance to corrosion Total premix burner, built in stainless steel (Class NOx 6) Modulation 1:5 CNG and also LPG Sanitary plate heat exchanger in stainless steel 7 l expansion vessel for mod. 25S and 10 l for mod. 35S High efficiency pump with low energy consumption Maximum power adjustable according to the system Degree of protection IPX5D Recessed installation in the wall Integration with Savio solar systems, using a solar kit Digital control panel with backlit display Analog reading of the pressure on the machine, digital on the remote Arrangement for remote control (optional) and external probe as standard High circulation single coil primary heat exchanger Savio introduces the new stainless steel heat exchanger for condensing boilers to the market: Round . Round is a compact monothermal heat exchanger based on a stainless steel coil with an oval section. The heat exchanger consists of a combustion chamber, condensing area and an insulated metal disc protected with silicone ceramic fiber which separates the two areas. By using a single stainless steel strip to produce the coil, including inlet/outlet fittings, the following benefits are achieved: Accumulation of dirt and debris is avoided The water flow is uniformly distributed and guarantees a homogeneous heat exchange The water flow is constant for a longer life of the product Reduction of pressure drops with optimized circuit The ease of cleaning and the sturdiness of this exchanger are one of the main strengths of the product since it can be used on new systems but also on old systems in the event of renovations . Round integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the single coil. The absence of circuits in parallel guarantees an easy "washing" operation of the exchanger and the elimination of any air present in the system circuit. Thermoregulation By connecting the external probe (standard) and the remote control (optional) directly to the boiler, climatic regulation can be used. Edilia HE will adapt the system water temperature to the external climatic conditions, ensuring that the desired room temperature is reached without waste and optimizing consumption . By using the climatic regulation, the regulation efficiency is also raised, giving greater value to your home . Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

SAVIO INOXDENS HE 25S* Condensing Boiler Complete With Methane Fume Exhaust Kit - NEW ErP Code 10312.0214.0 Acta Dens model Performance DHW nominal heat input kW (kcal/h) 26.0 (22356) Nominal heat input * heating kW (kcal/h) ) 21.0 (18057) Maximum useful power in heating 60/80° kW (kcal/h) 20.5 (17627) Useful power in DHW 60/80° kW (kcal/h) 25.4 (21840) Efficiency at 100% load (50/30 °C) % 106.8 Sanitary flow rate ∆t =25°K l/min 14.7 8 liter expansion vessel NOx class 6 Dimensions Dimensions HxWxD mm 703x400x325 actaDENS Acta Dens completes the Savio range with premixed condensing: perfect for radiator systems and suitable for radiant systems with mixing groups. ActaDens is the compact condensing boiler that ensures high yields, low consumption and respect for the environment. Available for heating and domestic hot water production, in power ratings of 25 and 30 kW. Main features Primary condensing exchanger in stainless steel with steel lining to offer maximum resistance to corrosion Total premix burner, stainless steel (Nox Class 6) Modulation 1:5 CNG and also LPG Sanitary plate heat exchanger in stainless steel 8 liter expansion vessel High efficiency pump with low energy consumption Can be installed in a partially protected place Integration with SAVIO solar systems, using a solar kit Analog pressure reading Arrangement for remote control and external probe High circulation single coil primary heat exchanger Savio introduces the new stainless steel heat exchanger for condensing boilers to the market: Round. Round is a compact monothermal heat exchanger based on a stainless steel coil with an oval section. The heat exchanger consists of a combustion chamber, condensing area and an insulated metal disc protected with silicone ceramic fiber which separates the two areas. Using a single stainless steel strip to produce the coil, including inlet / outlet connections, the following advantages are obtained: The accumulation of dirt and debris is avoided The water flow is uniformly distributed and guarantees a homogeneous heat exchange Reduction of pressure drops with optimized circuit. The ease of cleaning and the robustness of this exchanger are one of the main strengths of the product since it can be used on new systems but also on old systems in the event of renovations. Round integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the single coil. The absence of circuits in parallel guarantees an easy "washing" operation of the exchanger and the elimination of any air present in the system circuit. Control panel: Summer/winter/off selector Heating temperature regulator DHW temperature regulator Analog pressure reading DHW and heating temperature visualization from the display Display of fault diagnostics, block status and fault history The display operates in the following modes: INFO – information available on the operating status and error history FREE programming – programmable parameters for generator/system adjustment and User SET INSTALLER programming - generator parameters ASSISTANCE programming - Authorized Assistance Center parameters Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Caldaia Riello Family 25 KIS a condensazione completa di kit scarico fumi low NOx GPL Hybrid Ready - NOVITA   RISCALDAMENTO Portata termica nominale kW 20,00 Potenza termica nominale (80°/60°) kW 19,48 Potenza termica nominale (50°/30°) kW 21,24  SANITARIO Portata termica nominale kW 25,00 Potenza termica nominale (*) kW 26,25 Rendimento di combustione % 97,8 CATEGORIA II2H3P Tensione di alimentazione V-Hz 230-50 Grado di protezione IP X5D  ESERCIZIO RISCALDAMENTO Pressione massima bar 3 Vaso d’espansione a membrana l 10 Dimensioni LxPxH mm 470x275x740 Classe energetica Riscaldamento/Sanitario A Family  La nuova gamma FAMILY nasce hybrid-ready, grazie all’intelligenza di sistema REC 10CH integrata nel pannello di controllo di serie. La caldaia è pertanto in grado di gestire in maniera integrata le sorgenti termiche a disposizione, senza necessità di controlli accessori. NON SERVE DECIDERE OGGICon FAMILY è possibile decidere di passare all’ibrido anche in un secondo momento, ampliando il sistema con pompe di calore, pannelli solari e bollitori/accumuli dell’offerta Riello, secondo le indicazioni a catalogo.ENERGY-SAVINGI sistemi ibridi consentono di ridurre i costi della generazione termica e le emissioni dannose in ambiente, grazie all’integrazione delle energie rinnovabili. FAMILY SI RINNOVA. IL TOP DI GAMMA DELL’OFFERTA MURALE RIELLO È IL RISULTATO DI UN NUOVO MODO DI PENSARE L’ENERGIA: EFFICIENTE, IBRIDA, GREEN. RISPETTOSA DELL’AMBIENTE PER IL MASSIMO RISPARMIO ENERGETICO, FAMILY È LA CALDAIA CHE STAVI CERCANDO, PER UN TOTALE COMFORT IN RISCALDAMENTO E IN SANITARIO. HYBRID READYFAMILY nasce hybrid ready, in grado cioè di gestire direttamente, senza necessità di accessori aggiuntivi, i componenti di un sistema multi-energia, in modo efficiente ed efficace.SCAMBIATORE IN ACCIAO INOXScambiatore primario in acciaio inox, con geometria a spira unica avvolta. Massima efficienza e affidabilità.ALTA EFFICIENZAMassimo comfort e minimi consumi, in riscaldamento ed in sanitarioSTABILITÀ DELL’ACQUA CALDA SANITARIANuovo scambiatore sanitario a piastre ottimizzato, per performance al top della categoria in termini di efficienza, stabilità della temperatura e tempi di attesa.INSTALLAZIONE SEMPLICE E VELOCECon FAMILY l’installazione e l’accesso ai componenti sono semplificati per ridurre al minimo tempo e faticaBASSE EMISSIONIFAMILY è certificata Classe 6 di NOx, la migliore prevista dagli standard europei. FAMILY è caratterizzata dal sistema di controllo di combustione elettronico evoluto, che monitora costantemente la combustione per ottenere consumi ed emissioni sempre ottimizzate.PANNELLO DI CONTROLLO CON NUOVA FUNZIONE IBRIDAGrazie all’intelligenza di sistema REC 10CH, integrata nell’elettronica della nuova FAMILY, la caldaia è in grado di gestire un sistema multi-energia, in modo semplice per l’utente e senza necessità di controlli accessori.  Garanzia Prodotto :  Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

ATTENZIONE  IL PRODOTTO È NUOVO E FUNZIONANTE, MA PRESENTA AMMACCATURE SUI PANNELLI LATERALI E L'IMBALLO È USURATO (PER MAGGIORI INFORMAZIONI SUI DANNEGGIAMENTI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE). Caldaia MURALE Riello START 30 Kis LOW NOx a condensazione cod. 20187407 completa di kit scarico fumi Metano Classe di efficienza stagionale del riscaldamento d'ambiente A Classe di efficienza energetica di riscaldamento dell'acqua- A Potenza nominale P nominale kW 19 Efficienza energetica stagionale del riscaldamento d'ambiente % 93 RISCALDAMENTO Portata termica nominale :kW 20,00 Potenza termica nominale (80÷60 °C) kW 24,38 Potenza termica nominale (50÷30 °C) kW 26,78 Portata termica ridotta : kW 3,95 Potenza termica ridotta (80÷60 °C) kW 3,79 Potenza termica ridotta (50÷30 °C) kW 4,09  SANITARIO Portata termica nominale kW 30,00 Potenza termica nominale kW 30,00 Portata termica ridotta kW 3,95 Potenza termica ridotta (*) kW 3,95 RENDIMENTI Rendimento utile Pn max-Pn min (80°-60°) % 97,5 - 96,0 Rendimento utile Pn max-Pn min (50°-30°) % 107,1 - 103,6 Rendimento utile 30 % (ritorno 30°C) % 108,8 Rendimento a P media Range Rated (80°-60°) % - 97,3 Rendimento a P media Range Rated 30% (30° ritorno) % - 109,0 Rendimento di combustione % 97,7 Perdite al camino con bruciatore acceso (Pn max) % 2,3 Perdite al camino con bruciatore spento % 0,08 Perdite al mantello con bruciatore acceso (Pn max) % 0,2 SCARICO FUMI Classe Nox - UNI EN 15502: 6 Prevalenza residua tubi concentrici 0,85 m ø 60-100 mm Pa : 60 Prevalenza residua tubi separati 0,5 m ø 80 mm Pa : 190 Prevalenza residua caldaia senza tubi e senza flangia Pa 196 CARATTERISTICHE ELETTRICHE Potenza elettrica (Pel max risc.- Pel max san.) W 85 - 102 Potenza elettrica circolatore (1000 l/h) W 42 Tensione di alimentazione V - Hz 230-50 Grado di protezione IP X5D ESERCIZIO RISCALDAMENTO Pressione massima bar 3 Pressione minima per il funzionamento standard bar 0,25 Temperatura massima °C 90 Pompa: prevalenza max disponibile all'impianto mbar 408 alla portata di l/h 1000 Vaso di espansione a membrana l 8  Precarica vaso di espansione bar 1 ESERCIZIO SANITARIO - VERSIONE ISTANTANEA Pressione massima bar - 8 Pressione minima bar - 0,5 Quantità di acqua calda con ?t 25°C l/min - 17,2 con ?deltat 30°C l/min 14,3 con deltat 35°C l/min - 12,3 Portata minima acqua sanitaria l/min - 2 Campo di selezione della temperatura H2O san. °C - 37/60 Regolatore di flusso l/min – 12 Nuova Start START è la nuova proposta, completamente rinnovata dal punto di vista tecnologico e funzionale, di caldaie a condenazione Riello per utenze domestiche di piccole e medie dimensioni. START è disponibile in 3 taglie 15, 25, 30 kW, in versioni combinate (KIS) e solo riscaldamento (IS). Una delle caratteristiche distintive della nuova START è l’innovativo pannello comandi digitale con tasti touch progettato con una particolare attenzione alla facilità di utilizzo. Scambiatore sanitario ad alta efficienza sviluppato da Riello HMI touchscreen moderna e intuitiva, con icone rappresentative e tasti capacitivi con suono acustico “buzzer” Design moderno e lineare con copertura raccordi inferiori sotto-caldaia disponibile come accessorio per un'ottima integrazione estetica Funzioni elettroniche specifiche sanitarie: ritardo sanitario, funzione anti-pendolazione e ventilatore smart Gruppo idraulico con sequenza a standard DIN Circolatore basso consumo (IEE?0,20) 7 m ad alta prevalenza disponibile come accessorio Facilità di installazione, integrazione anche in spazi contenuti e sostituzione grazie all'ampia ampia scelta di accessori disponibili come optional Rapporto di modulazione 1:8 Facile manutenzione e pulizia della camera di combustione grazie all'accesso frontale allo scambiatore – Efficienza stagionale 93% Vaso espansione laterale da 8 litri  Flangia fumi di serie con fumisteria dedicata Termoregolazione di serie in abbinamento alla sonda esterna, disponibile come accessorio Possibilità di installazione anche ad incasso (modello 25 KIS e 30 KIS) ed all'esterno in luoghi parzialmente protetti (IPX5D) Traversa di montaggio già integrata in caldaia e cavo di alimentazione elettrica a corredo Funzionamento a metano di serie con possibilità di trasformazione a GPL (G31) e aria propanata tramite accessori. Tale modifica è a cura dell'istallatore o del servizio tecnico di assistenza. Grado di protezione elettrica IPX5D. Garanzia Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

ATTENZIONE IL PRODOTTO È NUOVO E FUNZIONANTE MA PRESENTA L'IMBALLO DANNEGGIATO. Caldaia Murale Riello START 30 Kis LOW NOx a condensazione cod. 20187407 completa di kit scarico fumi Metano Classe di efficienza stagionale del riscaldamento d'ambiente A Classe di efficienza energetica di riscaldamento dell'acqua- A Potenza nominale P nominale kW 19 Efficienza energetica stagionale del riscaldamento d'ambiente % 93 RISCALDAMENTO Portata termica nominale :kW 20,00 Potenza termica nominale (80÷60 °C) kW 24,38 Potenza termica nominale (50÷30 °C) kW 26,78 Portata termica ridotta : kW 3,95 Potenza termica ridotta (80÷60 °C) kW 3,79 Potenza termica ridotta (50÷30 °C) kW 4,09  SANITARIO Portata termica nominale kW 30,00 Potenza termica nominale kW 30,00 Portata termica ridotta kW 3,95 Potenza termica ridotta (*) kW 3,95 RENDIMENTI Rendimento utile Pn max-Pn min (80°-60°) % 97,5 - 96,0 Rendimento utile Pn max-Pn min (50°-30°) % 107,1 - 103,6 Rendimento utile 30 % (ritorno 30°C) % 108,8 Rendimento a P media Range Rated (80°-60°) % - 97,3 Rendimento a P media Range Rated 30% (30° ritorno) % - 109,0 Rendimento di combustione % 97,7 Perdite al camino con bruciatore acceso (Pn max) % 2,3 Perdite al camino con bruciatore spento % 0,08 Perdite al mantello con bruciatore acceso (Pn max) % 0,2 SCARICO FUMI Classe Nox - UNI EN 15502: 6 Prevalenza residua tubi concentrici 0,85 m ø 60-100 mm Pa : 60 Prevalenza residua tubi separati 0,5 m ø 80 mm Pa : 190 Prevalenza residua caldaia senza tubi e senza flangia Pa 196 CARATTERISTICHE ELETTRICHE Potenza elettrica (Pel max risc.- Pel max san.) W 85 - 102 Potenza elettrica circolatore (1000 l/h) W 42 Tensione di alimentazione V - Hz 230-50 Grado di protezione IP X5D ESERCIZIO RISCALDAMENTO Pressione massima bar 3 Pressione minima per il funzionamento standard bar 0,25 Temperatura massima °C 90 Pompa: prevalenza max disponibile all'impianto mbar 408 alla portata di l/h 1000 Vaso di espansione a membrana l 8  Precarica vaso di espansione bar 1 ESERCIZIO SANITARIO - VERSIONE ISTANTANEA Pressione massima bar - 8 Pressione minima bar - 0,5 Quantità di acqua calda con ?t 25°C l/min - 17,2 con ?deltat 30°C l/min 14,3 con deltat 35°C l/min - 12,3 Portata minima acqua sanitaria l/min - 2 Campo di selezione della temperatura H2O san. °C - 37/60 Regolatore di flusso l/min – 12 Nuova Start START è la nuova proposta, completamente rinnovata dal punto di vista tecnologico e funzionale, di caldaie a condenazione Riello per utenze domestiche di piccole e medie dimensioni. START è disponibile in 3 taglie 15, 25, 30 kW, in versioni combinate (KIS) e solo riscaldamento (IS). Una delle caratteristiche distintive della nuova START è l’innovativo pannello comandi digitale con tasti touch progettato con una particolare attenzione alla facilità di utilizzo. Scambiatore sanitario ad alta efficienza sviluppato da Riello HMI touchscreen moderna e intuitiva, con icone rappresentative e tasti capacitivi con suono acustico “buzzer” Design moderno e lineare con copertura raccordi inferiori sotto-caldaia disponibile come accessorio per un'ottima integrazione estetica Funzioni elettroniche specifiche sanitarie: ritardo sanitario, funzione anti-pendolazione e ventilatore smart Gruppo idraulico con sequenza a standard DIN Circolatore basso consumo (IEE?0,20) 7 m ad alta prevalenza disponibile come accessorio Facilità di installazione, integrazione anche in spazi contenuti e sostituzione grazie all'ampia ampia scelta di accessori disponibili come optional Rapporto di modulazione 1:8 Facile manutenzione e pulizia della camera di combustione grazie all'accesso frontale allo scambiatore – Efficienza stagionale 93% Vaso espansione laterale da 8 litri  Flangia fumi di serie con fumisteria dedicata Termoregolazione di serie in abbinamento alla sonda esterna, disponibile come accessorio Possibilità di installazione anche ad incasso (modello 25 KIS e 30 KIS) ed all'esterno in luoghi parzialmente protetti (IPX5D) Traversa di montaggio già integrata in caldaia e cavo di alimentazione elettrica a corredo Funzionamento a metano di serie con possibilità di trasformazione a GPL (G31) e aria propanata tramite accessori. Tale modifica è a cura dell'istallatore o del servizio tecnico di assistenza. Grado di protezione elettrica IPX5D. Garanzia Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Condensing boiler Riello Residence Condens 25 KIS Gpl complete with flue kit cod. 20097541 Technical specifications Product code:20097541 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Firebox thermal power (heating): 25 kW Useful thermal power (sanitary): 25 kW Energy efficiency (92/42/EEC) **** Useful efficiency at Pn* (50°C-30°C): 105% Profit return 30% (47th return): 110% Sealed chamber, forced draught Quantity of hot water at ?t 25°C: 14.3 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 845 x 400 x 358 ; 39 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: LPG General characteristics RESIDENCE CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Heating only models and combined models Residence Condens is the Riello wall-mounted condensing boiler for medium-sized users. The new primary heat exchanger completely made of aluminum with front access to the combustion chamber ensures better efficiency and durability. It is available with powers from 20 to 32 kW. Characteristics: Modulation ratio 1:8 which allows the boiler to respond to all heat requests Self-modulating circulator, low consumption (IEE≤0.20) "Winter with Pre-heating" function: allows the DHW exchanger to be kept at the right temperature, reducing waiting times during withdrawal (instantaneous combined models only) Standard thermoregulation on the card in combination with the external probe (optional) Assembly template, hydraulic fittings, power supply cable supplied Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less